diff --git a/.templates/01-config_yaml.sh b/.templates/01-config_yaml.sh
index 228b49c8e..caa0c3f0b 100644
--- a/.templates/01-config_yaml.sh
+++ b/.templates/01-config_yaml.sh
@@ -7,8 +7,8 @@
 
 # Disable if config not present
 if [ ! -d /config ] || ! bashio::supervisor.ping 2>/dev/null; then
-    echo "..."
-    exit 0
+	echo "..."
+	exit 0
 fi
 
 # Define slug
@@ -17,13 +17,13 @@ slug="${slug#*_}"
 
 # Check type of config folder
 if [ ! -f /config/configuration.yaml ] && [ ! -f /config/configuration.json ]; then
-    # New config location
-    CONFIGLOCATION="/config"
-    CONFIGFILEBROWSER="/addon_configs/${HOSTNAME/-/_}/config.yaml"
+	# New config location
+	CONFIGLOCATION="/config"
+	CONFIGFILEBROWSER="/addon_configs/${HOSTNAME/-/_}/config.yaml"
 else
-    # Legacy config location
-    CONFIGLOCATION="/config/addons_config/${slug}"
-    CONFIGFILEBROWSER="/homeassistant/addons_config/$slug/config.yaml"
+	# Legacy config location
+	CONFIGLOCATION="/config/addons_config/${slug}"
+	CONFIGFILEBROWSER="/homeassistant/addons_config/$slug/config.yaml"
 fi
 
 # Default location
@@ -32,51 +32,51 @@ CONFIGSOURCE="$CONFIGLOCATION"/config.yaml
 
 # Is there a custom path
 if bashio::config.has_value 'CONFIG_LOCATION'; then
-    CONFIGSOURCE=$(bashio::config "CONFIG_LOCATION")
-    if [[ "$CONFIGSOURCE" == *.* ]]; then
-        CONFIGSOURCE=$(dirname "$CONFIGSOURCE")
-    fi
-    # If does not end by config.yaml, remove trailing slash and add config.yaml
-    if [[ "$CONFIGSOURCE" != *".yaml" ]]; then
-        CONFIGSOURCE="${CONFIGSOURCE%/}"/config.yaml
-    fi
-    # Check if config is located in an acceptable location
-    LOCATIONOK=""
-    for location in "/share" "/config" "/data"; do
-        if [[ "$CONFIGSOURCE" == "$location"* ]]; then
-            LOCATIONOK=true
-        fi
-    done
-    if [ -z "$LOCATIONOK" ]; then
-        bashio::log.red "Watch-out: your CONFIG_LOCATION values can only be set in /share, /config or /data (internal to addon). It will be reset to the default location: $CONFIGLOCATION/config.yaml"
-        CONFIGSOURCE="$CONFIGLOCATION"/config.yaml
-    fi
+	CONFIGSOURCE=$(bashio::config "CONFIG_LOCATION")
+	if [[ "$CONFIGSOURCE" == *.* ]]; then
+		CONFIGSOURCE=$(dirname "$CONFIGSOURCE")
+	fi
+	# If does not end by config.yaml, remove trailing slash and add config.yaml
+	if [[ "$CONFIGSOURCE" != *".yaml" ]]; then
+		CONFIGSOURCE="${CONFIGSOURCE%/}"/config.yaml
+	fi
+	# Check if config is located in an acceptable location
+	LOCATIONOK=""
+	for location in "/share" "/config" "/data"; do
+		if [[ "$CONFIGSOURCE" == "$location"* ]]; then
+			LOCATIONOK=true
+		fi
+	done
+	if [ -z "$LOCATIONOK" ]; then
+		bashio::log.red "Watch-out: your CONFIG_LOCATION values can only be set in /share, /config or /data (internal to addon). It will be reset to the default location: $CONFIGLOCATION/config.yaml"
+		CONFIGSOURCE="$CONFIGLOCATION"/config.yaml
+	fi
 fi
 
 # Migrate if needed
 if [[ "$CONFIGLOCATION" == "/config" ]]; then
-    # Migrate file
-    if [ -f "/homeassistant/addons_config/${slug}/config.yaml" ] && [ ! -L "/homeassistant/addons_config/${slug}" ]; then
-        echo "Migrating config.yaml to new config location"
-        mv "/homeassistant/addons_config/${slug}/config.yaml" /config/config.yaml
-    fi
-    # Migrate option
-    if [[ "$(bashio::config "CONFIG_LOCATION")" == "/config/addons_config"* ]] && [ -f /config/config.yaml ]; then
-        bashio::addon.option "CONFIG_LOCATION" "/config/config.yaml"
-        CONFIGSOURCE="/config/config.yaml"
-    fi
+	# Migrate file
+	if [ -f "/homeassistant/addons_config/${slug}/config.yaml" ] && [ ! -L "/homeassistant/addons_config/${slug}" ]; then
+		echo "Migrating config.yaml to new config location"
+		mv "/homeassistant/addons_config/${slug}/config.yaml" /config/config.yaml
+	fi
+	# Migrate option
+	if [[ "$(bashio::config "CONFIG_LOCATION")" == "/config/addons_config"* ]] && [ -f /config/config.yaml ]; then
+		bashio::addon.option "CONFIG_LOCATION" "/config/config.yaml"
+		CONFIGSOURCE="/config/config.yaml"
+	fi
 fi
 
 if [[ "$CONFIGSOURCE" != *".yaml" ]]; then
-    bashio::log.error "Something is going wrong in the config location, quitting"
-    exit 1
+	bashio::log.error "Something is going wrong in the config location, quitting"
+	exit 1
 fi
 
 # Permissions
 if [[ "$CONFIGSOURCE" == *".yaml" ]]; then
-    echo "Setting permissions for the config.yaml directory"
-    mkdir -p "$(dirname "${CONFIGSOURCE}")"
-    chmod -R 755 "$(dirname "${CONFIGSOURCE}")" 2>/dev/null
+	echo "Setting permissions for the config.yaml directory"
+	mkdir -p "$(dirname "${CONFIGSOURCE}")"
+	chmod -R 755 "$(dirname "${CONFIGSOURCE}")" 2>/dev/null
 fi
 
 ####################
@@ -86,9 +86,9 @@ fi
 echo ""
 bashio::log.green "Load environment variables from $CONFIGSOURCE if existing"
 if [[ "$CONFIGSOURCE" == "/config"* ]]; then
-    bashio::log.green "If accessing the file with filebrowser it should be mapped to $CONFIGFILEBROWSER"
+	bashio::log.green "If accessing the file with filebrowser it should be mapped to $CONFIGFILEBROWSER"
 else
-    bashio::log.green "If accessing the file with filebrowser it should be mapped to $CONFIGSOURCE"
+	bashio::log.green "If accessing the file with filebrowser it should be mapped to $CONFIGSOURCE"
 fi
 bashio::log.green "---------------------------------------------------------"
 bashio::log.green "Wiki here on how to use: github.com/alexbelgium/hassio-addons/wiki/Add-ons-feature:-add-env-variables"
@@ -96,18 +96,18 @@ echo ""
 
 # Check if config file is there, or create one from template
 if [ ! -f "$CONFIGSOURCE" ]; then
-    echo "... no config file, creating one from template. Please customize the file in $CONFIGSOURCE before restarting."
-    # Create folder
-    mkdir -p "$(dirname "${CONFIGSOURCE}")"
-    # Placing template in config
-    if [ -f /templates/config.yaml ]; then
-        # Use available template
-        cp /templates/config.yaml "$(dirname "${CONFIGSOURCE}")"
-    else
-        # Download template
-        TEMPLATESOURCE="https://raw.githubusercontent.com/alexbelgium/hassio-addons/master/.templates/config.template"
-        curl -f -L -s -S "$TEMPLATESOURCE" --output "$CONFIGSOURCE"
-    fi
+	echo "... no config file, creating one from template. Please customize the file in $CONFIGSOURCE before restarting."
+	# Create folder
+	mkdir -p "$(dirname "${CONFIGSOURCE}")"
+	# Placing template in config
+	if [ -f /templates/config.yaml ]; then
+		# Use available template
+		cp /templates/config.yaml "$(dirname "${CONFIGSOURCE}")"
+	else
+		# Download template
+		TEMPLATESOURCE="https://raw.githubusercontent.com/alexbelgium/hassio-addons/master/.templates/config.template"
+		curl -f -L -s -S "$TEMPLATESOURCE" --output "$CONFIGSOURCE"
+	fi
 fi
 
 # Check if there are lines to read
@@ -118,16 +118,16 @@ sed -i '/^$/d' /tempenv
 
 # Exit if empty
 if [ ! -s /tempenv ]; then
-    bashio::log.green "... no env variables found, exiting"
-    exit 0
+	bashio::log.green "... no env variables found, exiting"
+	exit 0
 fi
 
 # Check if yaml is valid
 EXIT_CODE=0
 yamllint -d relaxed /tempenv &>ERROR || EXIT_CODE=$?
 if [ "$EXIT_CODE" != 0 ]; then
-    cat ERROR
-    bashio::log.yellow "... config file has an invalid yaml format. Please check the file in $CONFIGSOURCE. Errors list above."
+	cat ERROR
+	bashio::log.yellow "... config file has an invalid yaml format. Please check the file in $CONFIGSOURCE. Errors list above."
 fi
 
 # converts yaml to variables
@@ -138,59 +138,59 @@ SECRETSFILE="/config/secrets.yaml"
 if [ -f "$SECRETSFILE" ]; then SECRETSFILE="/homeassistant/secrets.yaml"; fi
 
 while IFS= read -r line; do
-    # Skip empty lines
-    if [[ -z "$line" ]]; then
-        continue
-    fi
+	# Skip empty lines
+	if [[ -z "$line" ]]; then
+		continue
+	fi
 
-    # Check if secret
-    if [[ "${line}" == *'!secret '* ]]; then
-        echo "secret detected"
-        secret=${line#*secret }
-        # Check if single match
-        secretnum=$(sed -n "/$secret:/=" "$SECRETSFILE")
-        [[ $(echo $secretnum) == *' '* ]] && bashio::exit.nok "There are multiple matches for your password name. Please check your secrets.yaml file"
-        # Get text
-        secret=$(sed -n "/$secret:/p" "$SECRETSFILE")
-        secret=${secret#*: }
-        line="${line%%=*}='$secret'"
-    fi
+	# Check if secret
+	if [[ "${line}" == *'!secret '* ]]; then
+		echo "secret detected"
+		secret=${line#*secret }
+		# Check if single match
+		secretnum=$(sed -n "/$secret:/=" "$SECRETSFILE")
+		[[ $(echo $secretnum) == *' '* ]] && bashio::exit.nok "There are multiple matches for your password name. Please check your secrets.yaml file"
+		# Get text
+		secret=$(sed -n "/$secret:/p" "$SECRETSFILE")
+		secret=${secret#*: }
+		line="${line%%=*}='$secret'"
+	fi
 
-    # Data validation
-    if [[ "$line" =~ ^.+[=].+$ ]]; then
-        # extract keys and values
-        KEYS="${line%%=*}"
-        VALUE="${line#*=}"
-        # Check if VALUE is quoted
-        if [[ "$VALUE" != \"*\" ]] && [[ "$VALUE" != \'*\' ]]; then
-            VALUE="\"$VALUE\""
-        fi
-        line="${KEYS}=${VALUE}"
-        export "$line"
-        # export to python
-        if command -v "python3" &>/dev/null; then
-            [ ! -f /env.py ] && echo "import os" > /env.py
-            # Escape single quotes in VALUE
-            VALUE_ESCAPED="${VALUE//\'/\'\"\'\"\'}"
-            echo "os.environ['${KEYS}'] = '${VALUE_ESCAPED}'" >> /env.py
-            python3 /env.py
-        fi
-        # set .env
-        echo "$line" >> /.env
-        # set environment
-        mkdir -p /etc
-        echo "$line" >> /etc/environment
-        # Export to scripts
-        if cat /etc/services.d/*/*run* &>/dev/null; then sed -i "1a export $line" /etc/services.d/*/*run* 2>/dev/null; fi
-        if cat /etc/cont-init.d/*run* &>/dev/null; then sed -i "1a export $line" /etc/cont-init.d/*run* 2>/dev/null; fi
-        # For s6
-        if [ -d /var/run/s6/container_environment ]; then printf "%s" "${VALUE}" > /var/run/s6/container_environment/"${KEYS}"; fi
-        echo "export $line" >> ~/.bashrc
-        # Show in log
-        if ! bashio::config.false "verbose"; then bashio::log.blue "$line"; fi
-    else
-        bashio::log.red "Skipping line that does not follow the correct structure: $line"
-    fi
-done < "/tempenv"
+	# Data validation
+	if [[ "$line" =~ ^.+[=].+$ ]]; then
+		# extract keys and values
+		KEYS="${line%%=*}"
+		VALUE="${line#*=}"
+		# Check if VALUE is quoted
+		if [[ "$VALUE" != \"*\" ]] && [[ "$VALUE" != \'*\' ]]; then
+			VALUE="\"$VALUE\""
+		fi
+		line="${KEYS}=${VALUE}"
+		export "$line"
+		# export to python
+		if command -v "python3" &>/dev/null; then
+			[ ! -f /env.py ] && echo "import os" >/env.py
+			# Escape single quotes in VALUE
+			VALUE_ESCAPED="${VALUE//\'/\'\"\'\"\'}"
+			echo "os.environ['${KEYS}'] = '${VALUE_ESCAPED}'" >>/env.py
+			python3 /env.py
+		fi
+		# set .env
+		echo "$line" >>/.env
+		# set environment
+		mkdir -p /etc
+		echo "$line" >>/etc/environment
+		# Export to scripts
+		if cat /etc/services.d/*/*run* &>/dev/null; then sed -i "1a export $line" /etc/services.d/*/*run* 2>/dev/null; fi
+		if cat /etc/cont-init.d/*run* &>/dev/null; then sed -i "1a export $line" /etc/cont-init.d/*run* 2>/dev/null; fi
+		# For s6
+		if [ -d /var/run/s6/container_environment ]; then printf "%s" "${VALUE}" >/var/run/s6/container_environment/"${KEYS}"; fi
+		echo "export $line" >>~/.bashrc
+		# Show in log
+		if ! bashio::config.false "verbose"; then bashio::log.blue "$line"; fi
+	else
+		bashio::log.red "Skipping line that does not follow the correct structure: $line"
+	fi
+done <"/tempenv"
 
 rm /tempenv