diff --git a/qbittorrent/rootfs/etc/cont-init.d/93-wg_test.sh b/qbittorrent/rootfs/etc/cont-init.d/93-wg_test.sh
deleted file mode 100755
index 09f69913c..000000000
--- a/qbittorrent/rootfs/etc/cont-init.d/93-wg_test.sh
+++ /dev/null
@@ -1,186 +0,0 @@
-#!/usr/bin/with-contenv bashio
-# shellcheck shell=bash
-set -e
-
-exit 0
-if bashio::config.true 'wireguard_enabled'; then
-
-########################################################
-# DRAFT : Start wireguard if needed
-########################################################
-
-QBT_CONFIG_FILE="/config/qBittorrent/qBittorrent.conf"
-
-#################
-# SET VARIABLES #
-#################
-
-# Ensure single vpn
-if bashio::config.true 'openvpn_enabled' && bashio::config.true 'wireguard_enabled'; then
-    bashio::log.warning "Both openvpn_enabled and wireguard_enabled are set. Openvpn configuration will be used"
-    bashio::addon.option 'wireguard_enabled' false
-fi
-
-# Set variables
-if bashio::config.true 'wireguard_enabled'; then
-    vpn="wireguard"
-    vpn_ending=".conf"
-    vpn_interface="wg0"
-fi
-
-# Permissions
-chmod 755 /config/openvpn/*
-chmod 755 /config/wireguard/*
-
-#################
-# CONFIGURE VPN #
-#################
-
-    ############
-    # MESSAGES #
-    ############
-
-    bashio::log.info "----------------------------"
-    bashio::log.info "${vpn} enabled, configuring"
-    bashio::log.info "----------------------------"
-
-    # Get current ip
-    curl -s ipecho.net/plain >/currentip
-
-    ####################
-    # CONFIG SELECTION #
-    ####################
-
-    # If openvpn_config option used
-    if bashio::config.has_value "openvpn_config"; then
-        openvpn_config=$(bashio::config 'openvpn_config')
-        # If file found
-        if [ -f /config/"${vpn}"/"${openvpn_config}" ]; then
-            # If correct type
-            if [[ "${openvpn_config}" == *"${vpn_ending}" ]]; then
-                echo "... configured config file : using /addon_configs/$HOSTNAME/${vpn}/${openvpn_config}"
-            else
-                bashio::exit.nok "Configured ${vpn_ending} file : ${openvpn_config} is set but does not end by ${vpn_ending} ; it can't be used!"
-            fi
-        else
-            bashio::exit.nok "Configured ${vpn_ending} file : ${openvpn_config} not found! Are you sure you added it in /addon_configs/$HOSTNAME/${vpn} using the Filebrowser addon ?"
-        fi
-        # If openvpn_config not set, but folder is not empty
-    elif ls /config/"${vpn}"/*"${vpn_ending}" >/dev/null 2>&1; then
-        # Look for openvpn files
-        # Wildcard search for openvpn config files and store results in array
-        mapfile -t VPN_CONFIGS < <(find /config/"${vpn}" -maxdepth 1 -name "*${vpn_ending}" -print)
-        # Choose random config
-        VPN_CONFIG="${VPN_CONFIGS[$RANDOM % ${#VPN_CONFIGS[@]}]}"
-        # Get the VPN_CONFIG name without the path and extension
-        openvpn_config="${VPN_CONFIG##*/}"
-        echo "... ${vpn} enabled, but openvpn_config option empty. Selecting a random ${vpn_ending} file : ${openvpn_config}. Other available files :"
-        printf '%s\n' "${VPN_CONFIGS[@]}"
-        # If openvpn_enabled set, config not set, and openvpn folder empty
-    else
-        bashio::exit.nok "_enabled is set, however, your ${vpn} folder is empty ! Are you sure you added it in /addon_configs/$HOSTNAME/ using the Filebrowser addon ?"
-    fi
-
-    # Send to script
-    sed -i "s|/config/${vpn}/config${vpn_ending}|/config/${vpn}/${openvpn_config}|g" /etc/s6-overlay/s6-rc.d/svc-qbittorrent/run
-
-    #######################
-    # WIREGUARD SPECIFICS #
-    #######################
-
-    if [[ "$vpn" == "wireguard" ]]; then
-        echo "wireguard"
-
-        # Set interface name
-        vpn_interface="${openvpn_config%.*}"
-
-        # Set gateway
-        DEFAULT_IPV4_GATEWAY=$(ip -4 route list 0/0 | cut -d ' ' -f 3 | head -n 1)
-
-        # Route WebUI traffic over "$DEFAULT_IPV4_GATEWAY"
-        mkdir -p /etc/iproute2/
-        echo "8080 webui" >> /etc/iproute2/rt_tables
-        if [ -n "$DEFAULT_IPV4_GATEWAY" ]; then
-        	# Default
-        	ip rule add fwmark 8080 table webui
-        	ip route add default via "$DEFAULT_IPV4_GATEWAY" table webui
-        	# Look for local networks first
-        	ip rule add fwmark 8080 table main suppress_prefixlength 1
-        fi
-
-        # Ensure ingress is allowed in allowed_ips
-        allowed_ips="$(sed -n "/AllowedIPs/p" /config/wireguard/"${openvpn_config}")"
-        allowed_ips="${allowed_ips//*=}"
-        # Use comma as separator and read into an array
-        IFS=',' read -ra ADDR <<< "$allowed_ips"
-        # Initialize an empty array to hold the filtered elements
-        filtered=()
-        # Loop over the elements
-        for i in "${ADDR[@]}" 127.0.0.1 10.0.0.0/8 192.168.0.0/16 172.16.0.0/12 172.30.0.0/16; do
-            # If the element does not contain "::", add it to the filtered array
-            if [[ $i != *::* ]]; then
-                filtered+=("$i")
-            fi
-        done
-        filtered=("$(echo "${filtered[@]}" | tr ' ' '\n' | sort -u | tr '\n' ' ')")
-        # Join the filtered elements with commas and store in a variable
-        allowed_ips=$(IFS=', '; echo "${filtered[*]}")
-        # Store it in the conf file
-        sed -i "/^AllowedIPs/c AllowedIPs=$allowed_ips" /config/wireguard/"${openvpn_config}"
-
-    fi
-
-    ###################
-    # Accept local ip #
-    ###################
-
-    ip route add 10.0.0.0/8 via 172.30.32.1 || true
-    ip route add 192.168.0.0/16 via 172.30.32.1 || true
-    ip route add 172.16.0.0/12 via 172.30.32.1 || true
-    ip route add 172.30.0.0/16 via 172.30.32.1 || true
-
-    ##################
-    # CONFIGURE QBIT #
-    ##################
-
-    echo "... $vpn correctly set, qbittorrent will run tunnelled"
-
-    # Connection with interface binding
-    echo "Using interface binding in the qBittorrent app"
-
-    # Define preferences line
-    cd /config/qBittorrent/ || exit 1
-
-    # If qBittorrent.conf exists
-    if [ -f "$QBT_CONFIG_FILE" ]; then
-        # Remove previous line and bind tun0
-        echo "... deleting previous interface settings"
-        sed -i '/Interface/d' "$QBT_CONFIG_FILE"
-
-        # Bind tun0
-        echo "... binding ${vpn_interface} interface in qBittorrent configuration"
-        sed -i "/\[Preferences\]/ i\Connection\\\Interface=${vpn_interface}" "$QBT_CONFIG_FILE"
-        sed -i "/\[Preferences\]/ i\Connection\\\InterfaceName=${vpn_interface}" "$QBT_CONFIG_FILE"
-
-        # Add to ongoing session
-        sed -i "/\[BitTorrent\]/a \Session\\\Interface=${vpn_interface}" "$QBT_CONFIG_FILE"
-        sed -i "/\[BitTorrent\]/a \Session\\\InterfaceName=${vpn_interface}" "$QBT_CONFIG_FILE"
-
-    else
-        bashio::log.error "qBittorrent config file doesn't exist, openvpn must be added manually to qbittorrent options "
-        exit 1
-    fi
-
-elif ! bashio::config.true 'openvpn_enabled'; then
-
-    ##################
-    # REMOVE OPENVPN #
-    ##################
-
-    # Ensure no redirection by removing the direction tag
-    if [ -f "$QBT_CONFIG_FILE" ]; then
-        sed -i '/Interface/d' "$QBT_CONFIG_FILE"
-    fi
-    bashio::log.info "Direct connection without VPN enabled"
-
-fi