diff --git a/bazarr/root/etc/cont-init.d/92-smb_mounts_v1.4.sh b/bazarr/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
index a31ade114..e4b37713b 100644
--- a/bazarr/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
+++ b/bazarr/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
@@ -5,68 +5,65 @@
 ####################
 if bashio::config.has_value 'networkdisks'; then
 
-    # Define variables 
-    MOREDISKS=$(bashio::config 'networkdisks')
-    CIFS_USERNAME=$(bashio::config 'cifsusername')
-    CIFS_PASSWORD=$(bashio::config 'cifspassword')
-    MOUNTED=false
-    SMBVERS=""
-    SECVERS=""
-    
-    # Dont execute if still default
-   [ ${MOREDISKS::1} == "<" ] && exit 0
+  # Define variables
+  MOREDISKS=$(bashio::config 'networkdisks')
+  CIFS_USERNAME=$(bashio::config 'cifsusername')
+  CIFS_PASSWORD=$(bashio::config 'cifspassword')
+  MOUNTED=false
+  SMBVERS=""
+  SECVERS=""
 
-    # Mount CIFS Share if configured and if Protection Mode is active
-    bashio::log.info 'Mounting smb share(s)...'
+  # Dont execute if still default
+  [ ${MOREDISKS::1} == "<" ] && exit 0
 
-    if bashio::config.has_value 'cifsdomain'; then 
-      DOMAIN=",domain=$(bashio::config 'cifsdomain')" 
-    else
-      DOMAIN=""
-    fi
- 
-    # Mounting disks
-    for disk in ${MOREDISKS//,/ }  # Separate comma separated values
-    do
-      # Clean name of network share
-      disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
-      diskname=${disk//\\//} #replace \ with /
-      diskname=${diskname##*/} # Get only last part of the name
-      # Prepare mount point
-      mkdir -p /mnt/$diskname
-      chown -R root:root /mnt/$diskname
-      
-      #Tries to mount with default options
-      mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
-      
-      # if Fail test different smb and sec versions
-      if [ $MOUNTED = false ]; then
-        for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"
-        do
-           mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break  || MOUNTED=false
-           for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5" ",iocharset=utf8"
-           do
-                mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
-           done
+  # Mount CIFS Share if configured and if Protection Mode is active
+  bashio::log.info 'Mounting smb share(s)...'
+
+  if bashio::config.has_value 'cifsdomain'; then
+    DOMAIN=",domain=$(bashio::config 'cifsdomain')"
+  else
+    DOMAIN=""
+  fi
+
+  # Mounting disks
+  for disk in ${MOREDISKS//,/ }; do # Separate comma separated values
+    # Clean name of network share
+    disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
+    diskname=${disk//\\//}            #replace \ with /
+    diskname=${diskname##*/}          # Get only last part of the name
+    # Prepare mount point
+    mkdir -p /mnt/$diskname
+    chown -R root:root /mnt/$diskname
+
+    #Tries to mount with default options
+    mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
+
+    # if Fail test different smb and sec versions
+    if [ $MOUNTED = false ]; then
+      for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"; do
+        mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break || MOUNTED=false
+        for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5" ",iocharset=utf8"; do
+          mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
         done
-      fi
+      done
+    fi
 
-      # Test smbclient if not mounted yet
-      if [ $MOUNTED = false ]; then
-        smbclient -L $disk -U $CIFS_USERNAME%$CIFS_PASSWORD --option="client min protocol"="NT1" && \
-        bashio::log.info "Mounted with smbclient"
-      fi
+    # Test smbclient if not mounted yet
+    if [ $MOUNTED = false ]; then
+      smbclient -L $disk -U $CIFS_USERNAME%$CIFS_PASSWORD --option="client min protocol"="NT1" && MOUNTED=true && \
+      bashio::log.info "Mounted with smbclient"
+    fi
 
-      # Messages
-      if [ $MOUNTED = true ]; then
-        #Test write permissions
-        touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw" 
-      else
-        # message if still fail
-        bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
-        bashio::log.fatal "Error read : $(<ERRORCODE)" # Mount share
-        rm ERRORCODE
-      fi
+    # Messages
+    if [ $MOUNTED = true ]; then
+      #Test write permissions
+      touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw"
+    else
+      # message if still fail
+      bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
+      bashio::log.fatal "Error read : $(<ERRORCODE)"                                                                                                                                                          # Mount share
+      rm ERRORCODE
+    fi
 
-    done
+  done
 fi
diff --git a/doublecommander/root/etc/cont-init.d/92-smb_mounts_v1.4.sh b/doublecommander/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
index a31ade114..e4b37713b 100644
--- a/doublecommander/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
+++ b/doublecommander/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
@@ -5,68 +5,65 @@
 ####################
 if bashio::config.has_value 'networkdisks'; then
 
-    # Define variables 
-    MOREDISKS=$(bashio::config 'networkdisks')
-    CIFS_USERNAME=$(bashio::config 'cifsusername')
-    CIFS_PASSWORD=$(bashio::config 'cifspassword')
-    MOUNTED=false
-    SMBVERS=""
-    SECVERS=""
-    
-    # Dont execute if still default
-   [ ${MOREDISKS::1} == "<" ] && exit 0
+  # Define variables
+  MOREDISKS=$(bashio::config 'networkdisks')
+  CIFS_USERNAME=$(bashio::config 'cifsusername')
+  CIFS_PASSWORD=$(bashio::config 'cifspassword')
+  MOUNTED=false
+  SMBVERS=""
+  SECVERS=""
 
-    # Mount CIFS Share if configured and if Protection Mode is active
-    bashio::log.info 'Mounting smb share(s)...'
+  # Dont execute if still default
+  [ ${MOREDISKS::1} == "<" ] && exit 0
 
-    if bashio::config.has_value 'cifsdomain'; then 
-      DOMAIN=",domain=$(bashio::config 'cifsdomain')" 
-    else
-      DOMAIN=""
-    fi
- 
-    # Mounting disks
-    for disk in ${MOREDISKS//,/ }  # Separate comma separated values
-    do
-      # Clean name of network share
-      disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
-      diskname=${disk//\\//} #replace \ with /
-      diskname=${diskname##*/} # Get only last part of the name
-      # Prepare mount point
-      mkdir -p /mnt/$diskname
-      chown -R root:root /mnt/$diskname
-      
-      #Tries to mount with default options
-      mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
-      
-      # if Fail test different smb and sec versions
-      if [ $MOUNTED = false ]; then
-        for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"
-        do
-           mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break  || MOUNTED=false
-           for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5" ",iocharset=utf8"
-           do
-                mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
-           done
+  # Mount CIFS Share if configured and if Protection Mode is active
+  bashio::log.info 'Mounting smb share(s)...'
+
+  if bashio::config.has_value 'cifsdomain'; then
+    DOMAIN=",domain=$(bashio::config 'cifsdomain')"
+  else
+    DOMAIN=""
+  fi
+
+  # Mounting disks
+  for disk in ${MOREDISKS//,/ }; do # Separate comma separated values
+    # Clean name of network share
+    disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
+    diskname=${disk//\\//}            #replace \ with /
+    diskname=${diskname##*/}          # Get only last part of the name
+    # Prepare mount point
+    mkdir -p /mnt/$diskname
+    chown -R root:root /mnt/$diskname
+
+    #Tries to mount with default options
+    mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
+
+    # if Fail test different smb and sec versions
+    if [ $MOUNTED = false ]; then
+      for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"; do
+        mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break || MOUNTED=false
+        for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5" ",iocharset=utf8"; do
+          mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
         done
-      fi
+      done
+    fi
 
-      # Test smbclient if not mounted yet
-      if [ $MOUNTED = false ]; then
-        smbclient -L $disk -U $CIFS_USERNAME%$CIFS_PASSWORD --option="client min protocol"="NT1" && \
-        bashio::log.info "Mounted with smbclient"
-      fi
+    # Test smbclient if not mounted yet
+    if [ $MOUNTED = false ]; then
+      smbclient -L $disk -U $CIFS_USERNAME%$CIFS_PASSWORD --option="client min protocol"="NT1" && MOUNTED=true && \
+      bashio::log.info "Mounted with smbclient"
+    fi
 
-      # Messages
-      if [ $MOUNTED = true ]; then
-        #Test write permissions
-        touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw" 
-      else
-        # message if still fail
-        bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
-        bashio::log.fatal "Error read : $(<ERRORCODE)" # Mount share
-        rm ERRORCODE
-      fi
+    # Messages
+    if [ $MOUNTED = true ]; then
+      #Test write permissions
+      touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw"
+    else
+      # message if still fail
+      bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
+      bashio::log.fatal "Error read : $(<ERRORCODE)"                                                                                                                                                          # Mount share
+      rm ERRORCODE
+    fi
 
-    done
+  done
 fi
diff --git a/emby/root/etc/cont-init.d/92-smb_mounts_v1.4.sh b/emby/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
index a31ade114..e4b37713b 100644
--- a/emby/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
+++ b/emby/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
@@ -5,68 +5,65 @@
 ####################
 if bashio::config.has_value 'networkdisks'; then
 
-    # Define variables 
-    MOREDISKS=$(bashio::config 'networkdisks')
-    CIFS_USERNAME=$(bashio::config 'cifsusername')
-    CIFS_PASSWORD=$(bashio::config 'cifspassword')
-    MOUNTED=false
-    SMBVERS=""
-    SECVERS=""
-    
-    # Dont execute if still default
-   [ ${MOREDISKS::1} == "<" ] && exit 0
+  # Define variables
+  MOREDISKS=$(bashio::config 'networkdisks')
+  CIFS_USERNAME=$(bashio::config 'cifsusername')
+  CIFS_PASSWORD=$(bashio::config 'cifspassword')
+  MOUNTED=false
+  SMBVERS=""
+  SECVERS=""
 
-    # Mount CIFS Share if configured and if Protection Mode is active
-    bashio::log.info 'Mounting smb share(s)...'
+  # Dont execute if still default
+  [ ${MOREDISKS::1} == "<" ] && exit 0
 
-    if bashio::config.has_value 'cifsdomain'; then 
-      DOMAIN=",domain=$(bashio::config 'cifsdomain')" 
-    else
-      DOMAIN=""
-    fi
- 
-    # Mounting disks
-    for disk in ${MOREDISKS//,/ }  # Separate comma separated values
-    do
-      # Clean name of network share
-      disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
-      diskname=${disk//\\//} #replace \ with /
-      diskname=${diskname##*/} # Get only last part of the name
-      # Prepare mount point
-      mkdir -p /mnt/$diskname
-      chown -R root:root /mnt/$diskname
-      
-      #Tries to mount with default options
-      mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
-      
-      # if Fail test different smb and sec versions
-      if [ $MOUNTED = false ]; then
-        for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"
-        do
-           mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break  || MOUNTED=false
-           for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5" ",iocharset=utf8"
-           do
-                mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
-           done
+  # Mount CIFS Share if configured and if Protection Mode is active
+  bashio::log.info 'Mounting smb share(s)...'
+
+  if bashio::config.has_value 'cifsdomain'; then
+    DOMAIN=",domain=$(bashio::config 'cifsdomain')"
+  else
+    DOMAIN=""
+  fi
+
+  # Mounting disks
+  for disk in ${MOREDISKS//,/ }; do # Separate comma separated values
+    # Clean name of network share
+    disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
+    diskname=${disk//\\//}            #replace \ with /
+    diskname=${diskname##*/}          # Get only last part of the name
+    # Prepare mount point
+    mkdir -p /mnt/$diskname
+    chown -R root:root /mnt/$diskname
+
+    #Tries to mount with default options
+    mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
+
+    # if Fail test different smb and sec versions
+    if [ $MOUNTED = false ]; then
+      for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"; do
+        mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break || MOUNTED=false
+        for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5" ",iocharset=utf8"; do
+          mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
         done
-      fi
+      done
+    fi
 
-      # Test smbclient if not mounted yet
-      if [ $MOUNTED = false ]; then
-        smbclient -L $disk -U $CIFS_USERNAME%$CIFS_PASSWORD --option="client min protocol"="NT1" && \
-        bashio::log.info "Mounted with smbclient"
-      fi
+    # Test smbclient if not mounted yet
+    if [ $MOUNTED = false ]; then
+      smbclient -L $disk -U $CIFS_USERNAME%$CIFS_PASSWORD --option="client min protocol"="NT1" && MOUNTED=true && \
+      bashio::log.info "Mounted with smbclient"
+    fi
 
-      # Messages
-      if [ $MOUNTED = true ]; then
-        #Test write permissions
-        touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw" 
-      else
-        # message if still fail
-        bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
-        bashio::log.fatal "Error read : $(<ERRORCODE)" # Mount share
-        rm ERRORCODE
-      fi
+    # Messages
+    if [ $MOUNTED = true ]; then
+      #Test write permissions
+      touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw"
+    else
+      # message if still fail
+      bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
+      bashio::log.fatal "Error read : $(<ERRORCODE)"                                                                                                                                                          # Mount share
+      rm ERRORCODE
+    fi
 
-    done
+  done
 fi
diff --git a/jellyfin/root/etc/cont-init.d/92-smb_mounts_v1.4.sh b/jellyfin/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
index a31ade114..e4b37713b 100644
--- a/jellyfin/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
+++ b/jellyfin/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
@@ -5,68 +5,65 @@
 ####################
 if bashio::config.has_value 'networkdisks'; then
 
-    # Define variables 
-    MOREDISKS=$(bashio::config 'networkdisks')
-    CIFS_USERNAME=$(bashio::config 'cifsusername')
-    CIFS_PASSWORD=$(bashio::config 'cifspassword')
-    MOUNTED=false
-    SMBVERS=""
-    SECVERS=""
-    
-    # Dont execute if still default
-   [ ${MOREDISKS::1} == "<" ] && exit 0
+  # Define variables
+  MOREDISKS=$(bashio::config 'networkdisks')
+  CIFS_USERNAME=$(bashio::config 'cifsusername')
+  CIFS_PASSWORD=$(bashio::config 'cifspassword')
+  MOUNTED=false
+  SMBVERS=""
+  SECVERS=""
 
-    # Mount CIFS Share if configured and if Protection Mode is active
-    bashio::log.info 'Mounting smb share(s)...'
+  # Dont execute if still default
+  [ ${MOREDISKS::1} == "<" ] && exit 0
 
-    if bashio::config.has_value 'cifsdomain'; then 
-      DOMAIN=",domain=$(bashio::config 'cifsdomain')" 
-    else
-      DOMAIN=""
-    fi
- 
-    # Mounting disks
-    for disk in ${MOREDISKS//,/ }  # Separate comma separated values
-    do
-      # Clean name of network share
-      disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
-      diskname=${disk//\\//} #replace \ with /
-      diskname=${diskname##*/} # Get only last part of the name
-      # Prepare mount point
-      mkdir -p /mnt/$diskname
-      chown -R root:root /mnt/$diskname
-      
-      #Tries to mount with default options
-      mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
-      
-      # if Fail test different smb and sec versions
-      if [ $MOUNTED = false ]; then
-        for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"
-        do
-           mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break  || MOUNTED=false
-           for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5" ",iocharset=utf8"
-           do
-                mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
-           done
+  # Mount CIFS Share if configured and if Protection Mode is active
+  bashio::log.info 'Mounting smb share(s)...'
+
+  if bashio::config.has_value 'cifsdomain'; then
+    DOMAIN=",domain=$(bashio::config 'cifsdomain')"
+  else
+    DOMAIN=""
+  fi
+
+  # Mounting disks
+  for disk in ${MOREDISKS//,/ }; do # Separate comma separated values
+    # Clean name of network share
+    disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
+    diskname=${disk//\\//}            #replace \ with /
+    diskname=${diskname##*/}          # Get only last part of the name
+    # Prepare mount point
+    mkdir -p /mnt/$diskname
+    chown -R root:root /mnt/$diskname
+
+    #Tries to mount with default options
+    mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
+
+    # if Fail test different smb and sec versions
+    if [ $MOUNTED = false ]; then
+      for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"; do
+        mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break || MOUNTED=false
+        for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5" ",iocharset=utf8"; do
+          mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
         done
-      fi
+      done
+    fi
 
-      # Test smbclient if not mounted yet
-      if [ $MOUNTED = false ]; then
-        smbclient -L $disk -U $CIFS_USERNAME%$CIFS_PASSWORD --option="client min protocol"="NT1" && \
-        bashio::log.info "Mounted with smbclient"
-      fi
+    # Test smbclient if not mounted yet
+    if [ $MOUNTED = false ]; then
+      smbclient -L $disk -U $CIFS_USERNAME%$CIFS_PASSWORD --option="client min protocol"="NT1" && MOUNTED=true && \
+      bashio::log.info "Mounted with smbclient"
+    fi
 
-      # Messages
-      if [ $MOUNTED = true ]; then
-        #Test write permissions
-        touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw" 
-      else
-        # message if still fail
-        bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
-        bashio::log.fatal "Error read : $(<ERRORCODE)" # Mount share
-        rm ERRORCODE
-      fi
+    # Messages
+    if [ $MOUNTED = true ]; then
+      #Test write permissions
+      touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw"
+    else
+      # message if still fail
+      bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
+      bashio::log.fatal "Error read : $(<ERRORCODE)"                                                                                                                                                          # Mount share
+      rm ERRORCODE
+    fi
 
-    done
+  done
 fi
diff --git a/lidarr/root/etc/cont-init.d/92-smb_mounts_v1.4.sh b/lidarr/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
index a31ade114..e4b37713b 100644
--- a/lidarr/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
+++ b/lidarr/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
@@ -5,68 +5,65 @@
 ####################
 if bashio::config.has_value 'networkdisks'; then
 
-    # Define variables 
-    MOREDISKS=$(bashio::config 'networkdisks')
-    CIFS_USERNAME=$(bashio::config 'cifsusername')
-    CIFS_PASSWORD=$(bashio::config 'cifspassword')
-    MOUNTED=false
-    SMBVERS=""
-    SECVERS=""
-    
-    # Dont execute if still default
-   [ ${MOREDISKS::1} == "<" ] && exit 0
+  # Define variables
+  MOREDISKS=$(bashio::config 'networkdisks')
+  CIFS_USERNAME=$(bashio::config 'cifsusername')
+  CIFS_PASSWORD=$(bashio::config 'cifspassword')
+  MOUNTED=false
+  SMBVERS=""
+  SECVERS=""
 
-    # Mount CIFS Share if configured and if Protection Mode is active
-    bashio::log.info 'Mounting smb share(s)...'
+  # Dont execute if still default
+  [ ${MOREDISKS::1} == "<" ] && exit 0
 
-    if bashio::config.has_value 'cifsdomain'; then 
-      DOMAIN=",domain=$(bashio::config 'cifsdomain')" 
-    else
-      DOMAIN=""
-    fi
- 
-    # Mounting disks
-    for disk in ${MOREDISKS//,/ }  # Separate comma separated values
-    do
-      # Clean name of network share
-      disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
-      diskname=${disk//\\//} #replace \ with /
-      diskname=${diskname##*/} # Get only last part of the name
-      # Prepare mount point
-      mkdir -p /mnt/$diskname
-      chown -R root:root /mnt/$diskname
-      
-      #Tries to mount with default options
-      mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
-      
-      # if Fail test different smb and sec versions
-      if [ $MOUNTED = false ]; then
-        for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"
-        do
-           mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break  || MOUNTED=false
-           for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5" ",iocharset=utf8"
-           do
-                mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
-           done
+  # Mount CIFS Share if configured and if Protection Mode is active
+  bashio::log.info 'Mounting smb share(s)...'
+
+  if bashio::config.has_value 'cifsdomain'; then
+    DOMAIN=",domain=$(bashio::config 'cifsdomain')"
+  else
+    DOMAIN=""
+  fi
+
+  # Mounting disks
+  for disk in ${MOREDISKS//,/ }; do # Separate comma separated values
+    # Clean name of network share
+    disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
+    diskname=${disk//\\//}            #replace \ with /
+    diskname=${diskname##*/}          # Get only last part of the name
+    # Prepare mount point
+    mkdir -p /mnt/$diskname
+    chown -R root:root /mnt/$diskname
+
+    #Tries to mount with default options
+    mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
+
+    # if Fail test different smb and sec versions
+    if [ $MOUNTED = false ]; then
+      for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"; do
+        mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break || MOUNTED=false
+        for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5" ",iocharset=utf8"; do
+          mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
         done
-      fi
+      done
+    fi
 
-      # Test smbclient if not mounted yet
-      if [ $MOUNTED = false ]; then
-        smbclient -L $disk -U $CIFS_USERNAME%$CIFS_PASSWORD --option="client min protocol"="NT1" && \
-        bashio::log.info "Mounted with smbclient"
-      fi
+    # Test smbclient if not mounted yet
+    if [ $MOUNTED = false ]; then
+      smbclient -L $disk -U $CIFS_USERNAME%$CIFS_PASSWORD --option="client min protocol"="NT1" && MOUNTED=true && \
+      bashio::log.info "Mounted with smbclient"
+    fi
 
-      # Messages
-      if [ $MOUNTED = true ]; then
-        #Test write permissions
-        touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw" 
-      else
-        # message if still fail
-        bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
-        bashio::log.fatal "Error read : $(<ERRORCODE)" # Mount share
-        rm ERRORCODE
-      fi
+    # Messages
+    if [ $MOUNTED = true ]; then
+      #Test write permissions
+      touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw"
+    else
+      # message if still fail
+      bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
+      bashio::log.fatal "Error read : $(<ERRORCODE)"                                                                                                                                                          # Mount share
+      rm ERRORCODE
+    fi
 
-    done
+  done
 fi
diff --git a/papermerge/rootfs/etc/cont-init.d/92-smb_mounts_v1.5.sh b/papermerge/rootfs/etc/cont-init.d/92-smb_mounts_v1.4.sh
similarity index 100%
rename from papermerge/rootfs/etc/cont-init.d/92-smb_mounts_v1.5.sh
rename to papermerge/rootfs/etc/cont-init.d/92-smb_mounts_v1.4.sh
diff --git a/plex/root/etc/cont-init.d/92-smb_mounts_v1.4.sh b/plex/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
index a31ade114..e4b37713b 100644
--- a/plex/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
+++ b/plex/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
@@ -5,68 +5,65 @@
 ####################
 if bashio::config.has_value 'networkdisks'; then
 
-    # Define variables 
-    MOREDISKS=$(bashio::config 'networkdisks')
-    CIFS_USERNAME=$(bashio::config 'cifsusername')
-    CIFS_PASSWORD=$(bashio::config 'cifspassword')
-    MOUNTED=false
-    SMBVERS=""
-    SECVERS=""
-    
-    # Dont execute if still default
-   [ ${MOREDISKS::1} == "<" ] && exit 0
+  # Define variables
+  MOREDISKS=$(bashio::config 'networkdisks')
+  CIFS_USERNAME=$(bashio::config 'cifsusername')
+  CIFS_PASSWORD=$(bashio::config 'cifspassword')
+  MOUNTED=false
+  SMBVERS=""
+  SECVERS=""
 
-    # Mount CIFS Share if configured and if Protection Mode is active
-    bashio::log.info 'Mounting smb share(s)...'
+  # Dont execute if still default
+  [ ${MOREDISKS::1} == "<" ] && exit 0
 
-    if bashio::config.has_value 'cifsdomain'; then 
-      DOMAIN=",domain=$(bashio::config 'cifsdomain')" 
-    else
-      DOMAIN=""
-    fi
- 
-    # Mounting disks
-    for disk in ${MOREDISKS//,/ }  # Separate comma separated values
-    do
-      # Clean name of network share
-      disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
-      diskname=${disk//\\//} #replace \ with /
-      diskname=${diskname##*/} # Get only last part of the name
-      # Prepare mount point
-      mkdir -p /mnt/$diskname
-      chown -R root:root /mnt/$diskname
-      
-      #Tries to mount with default options
-      mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
-      
-      # if Fail test different smb and sec versions
-      if [ $MOUNTED = false ]; then
-        for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"
-        do
-           mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break  || MOUNTED=false
-           for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5" ",iocharset=utf8"
-           do
-                mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
-           done
+  # Mount CIFS Share if configured and if Protection Mode is active
+  bashio::log.info 'Mounting smb share(s)...'
+
+  if bashio::config.has_value 'cifsdomain'; then
+    DOMAIN=",domain=$(bashio::config 'cifsdomain')"
+  else
+    DOMAIN=""
+  fi
+
+  # Mounting disks
+  for disk in ${MOREDISKS//,/ }; do # Separate comma separated values
+    # Clean name of network share
+    disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
+    diskname=${disk//\\//}            #replace \ with /
+    diskname=${diskname##*/}          # Get only last part of the name
+    # Prepare mount point
+    mkdir -p /mnt/$diskname
+    chown -R root:root /mnt/$diskname
+
+    #Tries to mount with default options
+    mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
+
+    # if Fail test different smb and sec versions
+    if [ $MOUNTED = false ]; then
+      for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"; do
+        mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break || MOUNTED=false
+        for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5" ",iocharset=utf8"; do
+          mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
         done
-      fi
+      done
+    fi
 
-      # Test smbclient if not mounted yet
-      if [ $MOUNTED = false ]; then
-        smbclient -L $disk -U $CIFS_USERNAME%$CIFS_PASSWORD --option="client min protocol"="NT1" && \
-        bashio::log.info "Mounted with smbclient"
-      fi
+    # Test smbclient if not mounted yet
+    if [ $MOUNTED = false ]; then
+      smbclient -L $disk -U $CIFS_USERNAME%$CIFS_PASSWORD --option="client min protocol"="NT1" && MOUNTED=true && \
+      bashio::log.info "Mounted with smbclient"
+    fi
 
-      # Messages
-      if [ $MOUNTED = true ]; then
-        #Test write permissions
-        touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw" 
-      else
-        # message if still fail
-        bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
-        bashio::log.fatal "Error read : $(<ERRORCODE)" # Mount share
-        rm ERRORCODE
-      fi
+    # Messages
+    if [ $MOUNTED = true ]; then
+      #Test write permissions
+      touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw"
+    else
+      # message if still fail
+      bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
+      bashio::log.fatal "Error read : $(<ERRORCODE)"                                                                                                                                                          # Mount share
+      rm ERRORCODE
+    fi
 
-    done
+  done
 fi
diff --git a/prowlarr/root/etc/cont-init.d/92-smb_mounts_v1.4.sh b/prowlarr/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
index a31ade114..e4b37713b 100644
--- a/prowlarr/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
+++ b/prowlarr/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
@@ -5,68 +5,65 @@
 ####################
 if bashio::config.has_value 'networkdisks'; then
 
-    # Define variables 
-    MOREDISKS=$(bashio::config 'networkdisks')
-    CIFS_USERNAME=$(bashio::config 'cifsusername')
-    CIFS_PASSWORD=$(bashio::config 'cifspassword')
-    MOUNTED=false
-    SMBVERS=""
-    SECVERS=""
-    
-    # Dont execute if still default
-   [ ${MOREDISKS::1} == "<" ] && exit 0
+  # Define variables
+  MOREDISKS=$(bashio::config 'networkdisks')
+  CIFS_USERNAME=$(bashio::config 'cifsusername')
+  CIFS_PASSWORD=$(bashio::config 'cifspassword')
+  MOUNTED=false
+  SMBVERS=""
+  SECVERS=""
 
-    # Mount CIFS Share if configured and if Protection Mode is active
-    bashio::log.info 'Mounting smb share(s)...'
+  # Dont execute if still default
+  [ ${MOREDISKS::1} == "<" ] && exit 0
 
-    if bashio::config.has_value 'cifsdomain'; then 
-      DOMAIN=",domain=$(bashio::config 'cifsdomain')" 
-    else
-      DOMAIN=""
-    fi
- 
-    # Mounting disks
-    for disk in ${MOREDISKS//,/ }  # Separate comma separated values
-    do
-      # Clean name of network share
-      disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
-      diskname=${disk//\\//} #replace \ with /
-      diskname=${diskname##*/} # Get only last part of the name
-      # Prepare mount point
-      mkdir -p /mnt/$diskname
-      chown -R root:root /mnt/$diskname
-      
-      #Tries to mount with default options
-      mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
-      
-      # if Fail test different smb and sec versions
-      if [ $MOUNTED = false ]; then
-        for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"
-        do
-           mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break  || MOUNTED=false
-           for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5" ",iocharset=utf8"
-           do
-                mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
-           done
+  # Mount CIFS Share if configured and if Protection Mode is active
+  bashio::log.info 'Mounting smb share(s)...'
+
+  if bashio::config.has_value 'cifsdomain'; then
+    DOMAIN=",domain=$(bashio::config 'cifsdomain')"
+  else
+    DOMAIN=""
+  fi
+
+  # Mounting disks
+  for disk in ${MOREDISKS//,/ }; do # Separate comma separated values
+    # Clean name of network share
+    disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
+    diskname=${disk//\\//}            #replace \ with /
+    diskname=${diskname##*/}          # Get only last part of the name
+    # Prepare mount point
+    mkdir -p /mnt/$diskname
+    chown -R root:root /mnt/$diskname
+
+    #Tries to mount with default options
+    mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
+
+    # if Fail test different smb and sec versions
+    if [ $MOUNTED = false ]; then
+      for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"; do
+        mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break || MOUNTED=false
+        for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5" ",iocharset=utf8"; do
+          mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
         done
-      fi
+      done
+    fi
 
-      # Test smbclient if not mounted yet
-      if [ $MOUNTED = false ]; then
-        smbclient -L $disk -U $CIFS_USERNAME%$CIFS_PASSWORD --option="client min protocol"="NT1" && \
-        bashio::log.info "Mounted with smbclient"
-      fi
+    # Test smbclient if not mounted yet
+    if [ $MOUNTED = false ]; then
+      smbclient -L $disk -U $CIFS_USERNAME%$CIFS_PASSWORD --option="client min protocol"="NT1" && MOUNTED=true && \
+      bashio::log.info "Mounted with smbclient"
+    fi
 
-      # Messages
-      if [ $MOUNTED = true ]; then
-        #Test write permissions
-        touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw" 
-      else
-        # message if still fail
-        bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
-        bashio::log.fatal "Error read : $(<ERRORCODE)" # Mount share
-        rm ERRORCODE
-      fi
+    # Messages
+    if [ $MOUNTED = true ]; then
+      #Test write permissions
+      touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw"
+    else
+      # message if still fail
+      bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
+      bashio::log.fatal "Error read : $(<ERRORCODE)"                                                                                                                                                          # Mount share
+      rm ERRORCODE
+    fi
 
-    done
+  done
 fi
diff --git a/qbittorrent/rootfs/etc/cont-init.d/92-smb_mounts_v1.4.sh b/qbittorrent/rootfs/etc/cont-init.d/92-smb_mounts_v1.4.sh
index a31ade114..e4b37713b 100644
--- a/qbittorrent/rootfs/etc/cont-init.d/92-smb_mounts_v1.4.sh
+++ b/qbittorrent/rootfs/etc/cont-init.d/92-smb_mounts_v1.4.sh
@@ -5,68 +5,65 @@
 ####################
 if bashio::config.has_value 'networkdisks'; then
 
-    # Define variables 
-    MOREDISKS=$(bashio::config 'networkdisks')
-    CIFS_USERNAME=$(bashio::config 'cifsusername')
-    CIFS_PASSWORD=$(bashio::config 'cifspassword')
-    MOUNTED=false
-    SMBVERS=""
-    SECVERS=""
-    
-    # Dont execute if still default
-   [ ${MOREDISKS::1} == "<" ] && exit 0
+  # Define variables
+  MOREDISKS=$(bashio::config 'networkdisks')
+  CIFS_USERNAME=$(bashio::config 'cifsusername')
+  CIFS_PASSWORD=$(bashio::config 'cifspassword')
+  MOUNTED=false
+  SMBVERS=""
+  SECVERS=""
 
-    # Mount CIFS Share if configured and if Protection Mode is active
-    bashio::log.info 'Mounting smb share(s)...'
+  # Dont execute if still default
+  [ ${MOREDISKS::1} == "<" ] && exit 0
 
-    if bashio::config.has_value 'cifsdomain'; then 
-      DOMAIN=",domain=$(bashio::config 'cifsdomain')" 
-    else
-      DOMAIN=""
-    fi
- 
-    # Mounting disks
-    for disk in ${MOREDISKS//,/ }  # Separate comma separated values
-    do
-      # Clean name of network share
-      disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
-      diskname=${disk//\\//} #replace \ with /
-      diskname=${diskname##*/} # Get only last part of the name
-      # Prepare mount point
-      mkdir -p /mnt/$diskname
-      chown -R root:root /mnt/$diskname
-      
-      #Tries to mount with default options
-      mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
-      
-      # if Fail test different smb and sec versions
-      if [ $MOUNTED = false ]; then
-        for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"
-        do
-           mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break  || MOUNTED=false
-           for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5" ",iocharset=utf8"
-           do
-                mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
-           done
+  # Mount CIFS Share if configured and if Protection Mode is active
+  bashio::log.info 'Mounting smb share(s)...'
+
+  if bashio::config.has_value 'cifsdomain'; then
+    DOMAIN=",domain=$(bashio::config 'cifsdomain')"
+  else
+    DOMAIN=""
+  fi
+
+  # Mounting disks
+  for disk in ${MOREDISKS//,/ }; do # Separate comma separated values
+    # Clean name of network share
+    disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
+    diskname=${disk//\\//}            #replace \ with /
+    diskname=${diskname##*/}          # Get only last part of the name
+    # Prepare mount point
+    mkdir -p /mnt/$diskname
+    chown -R root:root /mnt/$diskname
+
+    #Tries to mount with default options
+    mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
+
+    # if Fail test different smb and sec versions
+    if [ $MOUNTED = false ]; then
+      for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"; do
+        mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break || MOUNTED=false
+        for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5" ",iocharset=utf8"; do
+          mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
         done
-      fi
+      done
+    fi
 
-      # Test smbclient if not mounted yet
-      if [ $MOUNTED = false ]; then
-        smbclient -L $disk -U $CIFS_USERNAME%$CIFS_PASSWORD --option="client min protocol"="NT1" && \
-        bashio::log.info "Mounted with smbclient"
-      fi
+    # Test smbclient if not mounted yet
+    if [ $MOUNTED = false ]; then
+      smbclient -L $disk -U $CIFS_USERNAME%$CIFS_PASSWORD --option="client min protocol"="NT1" && MOUNTED=true && \
+      bashio::log.info "Mounted with smbclient"
+    fi
 
-      # Messages
-      if [ $MOUNTED = true ]; then
-        #Test write permissions
-        touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw" 
-      else
-        # message if still fail
-        bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
-        bashio::log.fatal "Error read : $(<ERRORCODE)" # Mount share
-        rm ERRORCODE
-      fi
+    # Messages
+    if [ $MOUNTED = true ]; then
+      #Test write permissions
+      touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw"
+    else
+      # message if still fail
+      bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
+      bashio::log.fatal "Error read : $(<ERRORCODE)"                                                                                                                                                          # Mount share
+      rm ERRORCODE
+    fi
 
-    done
+  done
 fi
diff --git a/radarr/root/etc/cont-init.d/92-smb_mounts_v1.4.sh b/radarr/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
index a31ade114..e4b37713b 100644
--- a/radarr/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
+++ b/radarr/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
@@ -5,68 +5,65 @@
 ####################
 if bashio::config.has_value 'networkdisks'; then
 
-    # Define variables 
-    MOREDISKS=$(bashio::config 'networkdisks')
-    CIFS_USERNAME=$(bashio::config 'cifsusername')
-    CIFS_PASSWORD=$(bashio::config 'cifspassword')
-    MOUNTED=false
-    SMBVERS=""
-    SECVERS=""
-    
-    # Dont execute if still default
-   [ ${MOREDISKS::1} == "<" ] && exit 0
+  # Define variables
+  MOREDISKS=$(bashio::config 'networkdisks')
+  CIFS_USERNAME=$(bashio::config 'cifsusername')
+  CIFS_PASSWORD=$(bashio::config 'cifspassword')
+  MOUNTED=false
+  SMBVERS=""
+  SECVERS=""
 
-    # Mount CIFS Share if configured and if Protection Mode is active
-    bashio::log.info 'Mounting smb share(s)...'
+  # Dont execute if still default
+  [ ${MOREDISKS::1} == "<" ] && exit 0
 
-    if bashio::config.has_value 'cifsdomain'; then 
-      DOMAIN=",domain=$(bashio::config 'cifsdomain')" 
-    else
-      DOMAIN=""
-    fi
- 
-    # Mounting disks
-    for disk in ${MOREDISKS//,/ }  # Separate comma separated values
-    do
-      # Clean name of network share
-      disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
-      diskname=${disk//\\//} #replace \ with /
-      diskname=${diskname##*/} # Get only last part of the name
-      # Prepare mount point
-      mkdir -p /mnt/$diskname
-      chown -R root:root /mnt/$diskname
-      
-      #Tries to mount with default options
-      mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
-      
-      # if Fail test different smb and sec versions
-      if [ $MOUNTED = false ]; then
-        for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"
-        do
-           mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break  || MOUNTED=false
-           for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5" ",iocharset=utf8"
-           do
-                mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
-           done
+  # Mount CIFS Share if configured and if Protection Mode is active
+  bashio::log.info 'Mounting smb share(s)...'
+
+  if bashio::config.has_value 'cifsdomain'; then
+    DOMAIN=",domain=$(bashio::config 'cifsdomain')"
+  else
+    DOMAIN=""
+  fi
+
+  # Mounting disks
+  for disk in ${MOREDISKS//,/ }; do # Separate comma separated values
+    # Clean name of network share
+    disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
+    diskname=${disk//\\//}            #replace \ with /
+    diskname=${diskname##*/}          # Get only last part of the name
+    # Prepare mount point
+    mkdir -p /mnt/$diskname
+    chown -R root:root /mnt/$diskname
+
+    #Tries to mount with default options
+    mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
+
+    # if Fail test different smb and sec versions
+    if [ $MOUNTED = false ]; then
+      for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"; do
+        mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break || MOUNTED=false
+        for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5" ",iocharset=utf8"; do
+          mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
         done
-      fi
+      done
+    fi
 
-      # Test smbclient if not mounted yet
-      if [ $MOUNTED = false ]; then
-        smbclient -L $disk -U $CIFS_USERNAME%$CIFS_PASSWORD --option="client min protocol"="NT1" && \
-        bashio::log.info "Mounted with smbclient"
-      fi
+    # Test smbclient if not mounted yet
+    if [ $MOUNTED = false ]; then
+      smbclient -L $disk -U $CIFS_USERNAME%$CIFS_PASSWORD --option="client min protocol"="NT1" && MOUNTED=true && \
+      bashio::log.info "Mounted with smbclient"
+    fi
 
-      # Messages
-      if [ $MOUNTED = true ]; then
-        #Test write permissions
-        touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw" 
-      else
-        # message if still fail
-        bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
-        bashio::log.fatal "Error read : $(<ERRORCODE)" # Mount share
-        rm ERRORCODE
-      fi
+    # Messages
+    if [ $MOUNTED = true ]; then
+      #Test write permissions
+      touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw"
+    else
+      # message if still fail
+      bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
+      bashio::log.fatal "Error read : $(<ERRORCODE)"                                                                                                                                                          # Mount share
+      rm ERRORCODE
+    fi
 
-    done
+  done
 fi
diff --git a/readarr/root/etc/cont-init.d/92-smb_mounts_v1.4.sh b/readarr/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
index a31ade114..e4b37713b 100644
--- a/readarr/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
+++ b/readarr/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
@@ -5,68 +5,65 @@
 ####################
 if bashio::config.has_value 'networkdisks'; then
 
-    # Define variables 
-    MOREDISKS=$(bashio::config 'networkdisks')
-    CIFS_USERNAME=$(bashio::config 'cifsusername')
-    CIFS_PASSWORD=$(bashio::config 'cifspassword')
-    MOUNTED=false
-    SMBVERS=""
-    SECVERS=""
-    
-    # Dont execute if still default
-   [ ${MOREDISKS::1} == "<" ] && exit 0
+  # Define variables
+  MOREDISKS=$(bashio::config 'networkdisks')
+  CIFS_USERNAME=$(bashio::config 'cifsusername')
+  CIFS_PASSWORD=$(bashio::config 'cifspassword')
+  MOUNTED=false
+  SMBVERS=""
+  SECVERS=""
 
-    # Mount CIFS Share if configured and if Protection Mode is active
-    bashio::log.info 'Mounting smb share(s)...'
+  # Dont execute if still default
+  [ ${MOREDISKS::1} == "<" ] && exit 0
 
-    if bashio::config.has_value 'cifsdomain'; then 
-      DOMAIN=",domain=$(bashio::config 'cifsdomain')" 
-    else
-      DOMAIN=""
-    fi
- 
-    # Mounting disks
-    for disk in ${MOREDISKS//,/ }  # Separate comma separated values
-    do
-      # Clean name of network share
-      disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
-      diskname=${disk//\\//} #replace \ with /
-      diskname=${diskname##*/} # Get only last part of the name
-      # Prepare mount point
-      mkdir -p /mnt/$diskname
-      chown -R root:root /mnt/$diskname
-      
-      #Tries to mount with default options
-      mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
-      
-      # if Fail test different smb and sec versions
-      if [ $MOUNTED = false ]; then
-        for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"
-        do
-           mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break  || MOUNTED=false
-           for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5" ",iocharset=utf8"
-           do
-                mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
-           done
+  # Mount CIFS Share if configured and if Protection Mode is active
+  bashio::log.info 'Mounting smb share(s)...'
+
+  if bashio::config.has_value 'cifsdomain'; then
+    DOMAIN=",domain=$(bashio::config 'cifsdomain')"
+  else
+    DOMAIN=""
+  fi
+
+  # Mounting disks
+  for disk in ${MOREDISKS//,/ }; do # Separate comma separated values
+    # Clean name of network share
+    disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
+    diskname=${disk//\\//}            #replace \ with /
+    diskname=${diskname##*/}          # Get only last part of the name
+    # Prepare mount point
+    mkdir -p /mnt/$diskname
+    chown -R root:root /mnt/$diskname
+
+    #Tries to mount with default options
+    mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
+
+    # if Fail test different smb and sec versions
+    if [ $MOUNTED = false ]; then
+      for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"; do
+        mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break || MOUNTED=false
+        for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5" ",iocharset=utf8"; do
+          mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
         done
-      fi
+      done
+    fi
 
-      # Test smbclient if not mounted yet
-      if [ $MOUNTED = false ]; then
-        smbclient -L $disk -U $CIFS_USERNAME%$CIFS_PASSWORD --option="client min protocol"="NT1" && \
-        bashio::log.info "Mounted with smbclient"
-      fi
+    # Test smbclient if not mounted yet
+    if [ $MOUNTED = false ]; then
+      smbclient -L $disk -U $CIFS_USERNAME%$CIFS_PASSWORD --option="client min protocol"="NT1" && MOUNTED=true && \
+      bashio::log.info "Mounted with smbclient"
+    fi
 
-      # Messages
-      if [ $MOUNTED = true ]; then
-        #Test write permissions
-        touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw" 
-      else
-        # message if still fail
-        bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
-        bashio::log.fatal "Error read : $(<ERRORCODE)" # Mount share
-        rm ERRORCODE
-      fi
+    # Messages
+    if [ $MOUNTED = true ]; then
+      #Test write permissions
+      touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw"
+    else
+      # message if still fail
+      bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
+      bashio::log.fatal "Error read : $(<ERRORCODE)"                                                                                                                                                          # Mount share
+      rm ERRORCODE
+    fi
 
-    done
+  done
 fi
diff --git a/sonarr/root/etc/cont-init.d/92-smb_mounts_v1.4.sh b/sonarr/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
index a31ade114..e4b37713b 100644
--- a/sonarr/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
+++ b/sonarr/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
@@ -5,68 +5,65 @@
 ####################
 if bashio::config.has_value 'networkdisks'; then
 
-    # Define variables 
-    MOREDISKS=$(bashio::config 'networkdisks')
-    CIFS_USERNAME=$(bashio::config 'cifsusername')
-    CIFS_PASSWORD=$(bashio::config 'cifspassword')
-    MOUNTED=false
-    SMBVERS=""
-    SECVERS=""
-    
-    # Dont execute if still default
-   [ ${MOREDISKS::1} == "<" ] && exit 0
+  # Define variables
+  MOREDISKS=$(bashio::config 'networkdisks')
+  CIFS_USERNAME=$(bashio::config 'cifsusername')
+  CIFS_PASSWORD=$(bashio::config 'cifspassword')
+  MOUNTED=false
+  SMBVERS=""
+  SECVERS=""
 
-    # Mount CIFS Share if configured and if Protection Mode is active
-    bashio::log.info 'Mounting smb share(s)...'
+  # Dont execute if still default
+  [ ${MOREDISKS::1} == "<" ] && exit 0
 
-    if bashio::config.has_value 'cifsdomain'; then 
-      DOMAIN=",domain=$(bashio::config 'cifsdomain')" 
-    else
-      DOMAIN=""
-    fi
- 
-    # Mounting disks
-    for disk in ${MOREDISKS//,/ }  # Separate comma separated values
-    do
-      # Clean name of network share
-      disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
-      diskname=${disk//\\//} #replace \ with /
-      diskname=${diskname##*/} # Get only last part of the name
-      # Prepare mount point
-      mkdir -p /mnt/$diskname
-      chown -R root:root /mnt/$diskname
-      
-      #Tries to mount with default options
-      mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
-      
-      # if Fail test different smb and sec versions
-      if [ $MOUNTED = false ]; then
-        for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"
-        do
-           mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break  || MOUNTED=false
-           for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5" ",iocharset=utf8"
-           do
-                mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
-           done
+  # Mount CIFS Share if configured and if Protection Mode is active
+  bashio::log.info 'Mounting smb share(s)...'
+
+  if bashio::config.has_value 'cifsdomain'; then
+    DOMAIN=",domain=$(bashio::config 'cifsdomain')"
+  else
+    DOMAIN=""
+  fi
+
+  # Mounting disks
+  for disk in ${MOREDISKS//,/ }; do # Separate comma separated values
+    # Clean name of network share
+    disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
+    diskname=${disk//\\//}            #replace \ with /
+    diskname=${diskname##*/}          # Get only last part of the name
+    # Prepare mount point
+    mkdir -p /mnt/$diskname
+    chown -R root:root /mnt/$diskname
+
+    #Tries to mount with default options
+    mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
+
+    # if Fail test different smb and sec versions
+    if [ $MOUNTED = false ]; then
+      for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"; do
+        mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break || MOUNTED=false
+        for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5" ",iocharset=utf8"; do
+          mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
         done
-      fi
+      done
+    fi
 
-      # Test smbclient if not mounted yet
-      if [ $MOUNTED = false ]; then
-        smbclient -L $disk -U $CIFS_USERNAME%$CIFS_PASSWORD --option="client min protocol"="NT1" && \
-        bashio::log.info "Mounted with smbclient"
-      fi
+    # Test smbclient if not mounted yet
+    if [ $MOUNTED = false ]; then
+      smbclient -L $disk -U $CIFS_USERNAME%$CIFS_PASSWORD --option="client min protocol"="NT1" && MOUNTED=true && \
+      bashio::log.info "Mounted with smbclient"
+    fi
 
-      # Messages
-      if [ $MOUNTED = true ]; then
-        #Test write permissions
-        touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw" 
-      else
-        # message if still fail
-        bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
-        bashio::log.fatal "Error read : $(<ERRORCODE)" # Mount share
-        rm ERRORCODE
-      fi
+    # Messages
+    if [ $MOUNTED = true ]; then
+      #Test write permissions
+      touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw"
+    else
+      # message if still fail
+      bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
+      bashio::log.fatal "Error read : $(<ERRORCODE)"                                                                                                                                                          # Mount share
+      rm ERRORCODE
+    fi
 
-    done
+  done
 fi
diff --git a/transmission/rootfs/etc/cont-init.d/92-smb_mounts_v1.4.sh b/transmission/rootfs/etc/cont-init.d/92-smb_mounts_v1.4.sh
index a31ade114..e4b37713b 100644
--- a/transmission/rootfs/etc/cont-init.d/92-smb_mounts_v1.4.sh
+++ b/transmission/rootfs/etc/cont-init.d/92-smb_mounts_v1.4.sh
@@ -5,68 +5,65 @@
 ####################
 if bashio::config.has_value 'networkdisks'; then
 
-    # Define variables 
-    MOREDISKS=$(bashio::config 'networkdisks')
-    CIFS_USERNAME=$(bashio::config 'cifsusername')
-    CIFS_PASSWORD=$(bashio::config 'cifspassword')
-    MOUNTED=false
-    SMBVERS=""
-    SECVERS=""
-    
-    # Dont execute if still default
-   [ ${MOREDISKS::1} == "<" ] && exit 0
+  # Define variables
+  MOREDISKS=$(bashio::config 'networkdisks')
+  CIFS_USERNAME=$(bashio::config 'cifsusername')
+  CIFS_PASSWORD=$(bashio::config 'cifspassword')
+  MOUNTED=false
+  SMBVERS=""
+  SECVERS=""
 
-    # Mount CIFS Share if configured and if Protection Mode is active
-    bashio::log.info 'Mounting smb share(s)...'
+  # Dont execute if still default
+  [ ${MOREDISKS::1} == "<" ] && exit 0
 
-    if bashio::config.has_value 'cifsdomain'; then 
-      DOMAIN=",domain=$(bashio::config 'cifsdomain')" 
-    else
-      DOMAIN=""
-    fi
- 
-    # Mounting disks
-    for disk in ${MOREDISKS//,/ }  # Separate comma separated values
-    do
-      # Clean name of network share
-      disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
-      diskname=${disk//\\//} #replace \ with /
-      diskname=${diskname##*/} # Get only last part of the name
-      # Prepare mount point
-      mkdir -p /mnt/$diskname
-      chown -R root:root /mnt/$diskname
-      
-      #Tries to mount with default options
-      mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
-      
-      # if Fail test different smb and sec versions
-      if [ $MOUNTED = false ]; then
-        for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"
-        do
-           mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break  || MOUNTED=false
-           for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5" ",iocharset=utf8"
-           do
-                mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
-           done
+  # Mount CIFS Share if configured and if Protection Mode is active
+  bashio::log.info 'Mounting smb share(s)...'
+
+  if bashio::config.has_value 'cifsdomain'; then
+    DOMAIN=",domain=$(bashio::config 'cifsdomain')"
+  else
+    DOMAIN=""
+  fi
+
+  # Mounting disks
+  for disk in ${MOREDISKS//,/ }; do # Separate comma separated values
+    # Clean name of network share
+    disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
+    diskname=${disk//\\//}            #replace \ with /
+    diskname=${diskname##*/}          # Get only last part of the name
+    # Prepare mount point
+    mkdir -p /mnt/$diskname
+    chown -R root:root /mnt/$diskname
+
+    #Tries to mount with default options
+    mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
+
+    # if Fail test different smb and sec versions
+    if [ $MOUNTED = false ]; then
+      for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"; do
+        mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break || MOUNTED=false
+        for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5" ",iocharset=utf8"; do
+          mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
         done
-      fi
+      done
+    fi
 
-      # Test smbclient if not mounted yet
-      if [ $MOUNTED = false ]; then
-        smbclient -L $disk -U $CIFS_USERNAME%$CIFS_PASSWORD --option="client min protocol"="NT1" && \
-        bashio::log.info "Mounted with smbclient"
-      fi
+    # Test smbclient if not mounted yet
+    if [ $MOUNTED = false ]; then
+      smbclient -L $disk -U $CIFS_USERNAME%$CIFS_PASSWORD --option="client min protocol"="NT1" && MOUNTED=true && \
+      bashio::log.info "Mounted with smbclient"
+    fi
 
-      # Messages
-      if [ $MOUNTED = true ]; then
-        #Test write permissions
-        touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw" 
-      else
-        # message if still fail
-        bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
-        bashio::log.fatal "Error read : $(<ERRORCODE)" # Mount share
-        rm ERRORCODE
-      fi
+    # Messages
+    if [ $MOUNTED = true ]; then
+      #Test write permissions
+      touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw"
+    else
+      # message if still fail
+      bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
+      bashio::log.fatal "Error read : $(<ERRORCODE)"                                                                                                                                                          # Mount share
+      rm ERRORCODE
+    fi
 
-    done
+  done
 fi
diff --git a/ubooquity/rootfs/etc/cont-init.d/92-smb_mounts_v1.4.sh b/ubooquity/rootfs/etc/cont-init.d/92-smb_mounts_v1.4.sh
index a31ade114..e4b37713b 100644
--- a/ubooquity/rootfs/etc/cont-init.d/92-smb_mounts_v1.4.sh
+++ b/ubooquity/rootfs/etc/cont-init.d/92-smb_mounts_v1.4.sh
@@ -5,68 +5,65 @@
 ####################
 if bashio::config.has_value 'networkdisks'; then
 
-    # Define variables 
-    MOREDISKS=$(bashio::config 'networkdisks')
-    CIFS_USERNAME=$(bashio::config 'cifsusername')
-    CIFS_PASSWORD=$(bashio::config 'cifspassword')
-    MOUNTED=false
-    SMBVERS=""
-    SECVERS=""
-    
-    # Dont execute if still default
-   [ ${MOREDISKS::1} == "<" ] && exit 0
+  # Define variables
+  MOREDISKS=$(bashio::config 'networkdisks')
+  CIFS_USERNAME=$(bashio::config 'cifsusername')
+  CIFS_PASSWORD=$(bashio::config 'cifspassword')
+  MOUNTED=false
+  SMBVERS=""
+  SECVERS=""
 
-    # Mount CIFS Share if configured and if Protection Mode is active
-    bashio::log.info 'Mounting smb share(s)...'
+  # Dont execute if still default
+  [ ${MOREDISKS::1} == "<" ] && exit 0
 
-    if bashio::config.has_value 'cifsdomain'; then 
-      DOMAIN=",domain=$(bashio::config 'cifsdomain')" 
-    else
-      DOMAIN=""
-    fi
- 
-    # Mounting disks
-    for disk in ${MOREDISKS//,/ }  # Separate comma separated values
-    do
-      # Clean name of network share
-      disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
-      diskname=${disk//\\//} #replace \ with /
-      diskname=${diskname##*/} # Get only last part of the name
-      # Prepare mount point
-      mkdir -p /mnt/$diskname
-      chown -R root:root /mnt/$diskname
-      
-      #Tries to mount with default options
-      mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
-      
-      # if Fail test different smb and sec versions
-      if [ $MOUNTED = false ]; then
-        for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"
-        do
-           mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break  || MOUNTED=false
-           for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5" ",iocharset=utf8"
-           do
-                mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
-           done
+  # Mount CIFS Share if configured and if Protection Mode is active
+  bashio::log.info 'Mounting smb share(s)...'
+
+  if bashio::config.has_value 'cifsdomain'; then
+    DOMAIN=",domain=$(bashio::config 'cifsdomain')"
+  else
+    DOMAIN=""
+  fi
+
+  # Mounting disks
+  for disk in ${MOREDISKS//,/ }; do # Separate comma separated values
+    # Clean name of network share
+    disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
+    diskname=${disk//\\//}            #replace \ with /
+    diskname=${diskname##*/}          # Get only last part of the name
+    # Prepare mount point
+    mkdir -p /mnt/$diskname
+    chown -R root:root /mnt/$diskname
+
+    #Tries to mount with default options
+    mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
+
+    # if Fail test different smb and sec versions
+    if [ $MOUNTED = false ]; then
+      for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"; do
+        mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break || MOUNTED=false
+        for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5" ",iocharset=utf8"; do
+          mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
         done
-      fi
+      done
+    fi
 
-      # Test smbclient if not mounted yet
-      if [ $MOUNTED = false ]; then
-        smbclient -L $disk -U $CIFS_USERNAME%$CIFS_PASSWORD --option="client min protocol"="NT1" && \
-        bashio::log.info "Mounted with smbclient"
-      fi
+    # Test smbclient if not mounted yet
+    if [ $MOUNTED = false ]; then
+      smbclient -L $disk -U $CIFS_USERNAME%$CIFS_PASSWORD --option="client min protocol"="NT1" && MOUNTED=true && \
+      bashio::log.info "Mounted with smbclient"
+    fi
 
-      # Messages
-      if [ $MOUNTED = true ]; then
-        #Test write permissions
-        touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw" 
-      else
-        # message if still fail
-        bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
-        bashio::log.fatal "Error read : $(<ERRORCODE)" # Mount share
-        rm ERRORCODE
-      fi
+    # Messages
+    if [ $MOUNTED = true ]; then
+      #Test write permissions
+      touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw"
+    else
+      # message if still fail
+      bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
+      bashio::log.fatal "Error read : $(<ERRORCODE)"                                                                                                                                                          # Mount share
+      rm ERRORCODE
+    fi
 
-    done
+  done
 fi