diff --git a/bazarr/Dockerfile b/bazarr/Dockerfile
index 057f3df33..5117d1a43 100644
--- a/bazarr/Dockerfile
+++ b/bazarr/Dockerfile
@@ -14,11 +14,13 @@ RUN \
         curl \
         cifs-utils \
         keyutils \
+        bazarr \
     || apk add --no-cache \
         jq \
         curl \
         cifs-utils \
         keyutils \
+        bazarr \
     \ 
     ##################
     # Install bashio #
diff --git a/bazarr/root/etc/cont-init.d/92-smb_mounts_v1.3.sh b/bazarr/root/etc/cont-init.d/92-smb_mounts_v1.3.sh
deleted file mode 100644
index 2e5d11a4f..000000000
--- a/bazarr/root/etc/cont-init.d/92-smb_mounts_v1.3.sh
+++ /dev/null
@@ -1,62 +0,0 @@
-#!/usr/bin/with-contenv bashio
-
-####################
-# MOUNT SMB SHARES #
-####################
-if bashio::config.has_value 'networkdisks'; then
-    # Mount CIFS Share if configured and if Protection Mode is active
-    bashio::log.info 'Mounting smb share(s)...'
-
-    # Define variables 
-    MOREDISKS=$(bashio::config 'networkdisks')
-    CIFS_USERNAME=$(bashio::config 'cifsusername')
-    CIFS_PASSWORD=$(bashio::config 'cifspassword')
-    MOUNTED=false
-    SMBVERS=""
-    SECVERS=""
-
-    if bashio::config.has_value 'cifsdomain'; then 
-      DOMAIN=",domain=$(bashio::config 'cifsdomain')" 
-    else
-      DOMAIN=""
-    fi
- 
-    # Mounting disks
-    for disk in ${MOREDISKS//,/ }  # Separate comma separated values
-    do
-      # Clean name of network share
-      disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
-      diskname=${disk//\\//} #replace \ with /
-      diskname=${diskname##*/} # Get only last part of the name
-      # Prepare mount point
-      mkdir -p /mnt/$diskname
-      chown -R root:root /mnt/$diskname
-      
-      #Tries to mount with default options
-      mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
-      
-      # if Fail test different smb and sec versions
-      if [ $MOUNTED = false ]; then
-        for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"
-        do
-           mount -t cifs -o rw,iocharset=utf8,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break  || MOUNTED=false
-           for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5"
-           do
-                mount -t cifs -o rw,iocharset=utf8,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
-           done
-        done
-      fi
-
-      # Messages
-      if [ $MOUNTED = true ]; then
-        #Test write permissions
-        touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw" 
-      else
-        # message if still fail
-        bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
-        bashio::log.fatal "Error read : $(<ERRORCODE)" # Mount share
-        rm ERRORCODE
-      fi
-
-    done
-fi
diff --git a/plex/root/etc/cont-init.d/92-smb_mounts_v1.3.sh b/bazarr/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
similarity index 78%
rename from plex/root/etc/cont-init.d/92-smb_mounts_v1.3.sh
rename to bazarr/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
index a861dbfff..c9008b2be 100644
--- a/plex/root/etc/cont-init.d/92-smb_mounts_v1.3.sh
+++ b/bazarr/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
@@ -32,9 +32,6 @@ if bashio::config.has_value 'networkdisks'; then
       mkdir -p /mnt/$diskname
       chown -R root:root /mnt/$diskname
       
-      #Tries to mount with default options
-      mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
-
       #Tries to mount with default options
       mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
       
@@ -42,14 +39,20 @@ if bashio::config.has_value 'networkdisks'; then
       if [ $MOUNTED = false ]; then
         for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"
         do
-           mount -t cifs -o rw,iocharset=utf8,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break  || MOUNTED=false
-           for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5"
+           mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break  || MOUNTED=false
+           for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5" ",iocharset=utf8"
            do
-           mount -t cifs -o rw,iocharset=utf8,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
+                mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
            done
         done
       fi
 
+      # Test smbclient if not mounted yet
+      if [ $MOUNTED = false ]; then
+        smbclient -L $disk -U $CIFS_USERNAME%$CIFS_PASSWORD --option="client min protocol"="NT1" && \
+        bashio::log.info "Mounted with smbclient"
+      fi
+
       # Messages
       if [ $MOUNTED = true ]; then
         #Test write permissions
diff --git a/doublecommander/Dockerfile b/doublecommander/Dockerfile
index 77ccae715..fc5f399e0 100644
--- a/doublecommander/Dockerfile
+++ b/doublecommander/Dockerfile
@@ -7,6 +7,7 @@ FROM ${BUILD_FROM}${BUILD_UPSTREAM}
 RUN apt-get update \
     && apt-get install -y --no-install-recommends \
     jq \
+    samba \
     && curl -J -L -o /tmp/bashio.tar.gz \
     "https://github.com/hassio-addons/bashio/archive/v0.7.1.tar.gz" \
     && mkdir /tmp/bashio \
diff --git a/doublecommander/root/etc/cont-init.d/92-smb_mounts_v1.3.sh b/doublecommander/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
similarity index 78%
rename from doublecommander/root/etc/cont-init.d/92-smb_mounts_v1.3.sh
rename to doublecommander/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
index 2e5d11a4f..c9008b2be 100644
--- a/doublecommander/root/etc/cont-init.d/92-smb_mounts_v1.3.sh
+++ b/doublecommander/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
@@ -39,14 +39,20 @@ if bashio::config.has_value 'networkdisks'; then
       if [ $MOUNTED = false ]; then
         for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"
         do
-           mount -t cifs -o rw,iocharset=utf8,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break  || MOUNTED=false
-           for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5"
+           mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break  || MOUNTED=false
+           for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5" ",iocharset=utf8"
            do
-                mount -t cifs -o rw,iocharset=utf8,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
+                mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
            done
         done
       fi
 
+      # Test smbclient if not mounted yet
+      if [ $MOUNTED = false ]; then
+        smbclient -L $disk -U $CIFS_USERNAME%$CIFS_PASSWORD --option="client min protocol"="NT1" && \
+        bashio::log.info "Mounted with smbclient"
+      fi
+
       # Messages
       if [ $MOUNTED = true ]; then
         #Test write permissions
diff --git a/emby/Dockerfile b/emby/Dockerfile
index 99da480ba..da185c914 100644
--- a/emby/Dockerfile
+++ b/emby/Dockerfile
@@ -18,6 +18,7 @@ RUN \
     jq \
     cifs-utils \
     keyutils \
+    samba \
     \
     ##################
     # Install bashio #
diff --git a/emby/root/etc/cont-init.d/92-smb_mounts_v1.3.sh b/emby/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
similarity index 78%
rename from emby/root/etc/cont-init.d/92-smb_mounts_v1.3.sh
rename to emby/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
index 2e5d11a4f..c9008b2be 100644
--- a/emby/root/etc/cont-init.d/92-smb_mounts_v1.3.sh
+++ b/emby/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
@@ -39,14 +39,20 @@ if bashio::config.has_value 'networkdisks'; then
       if [ $MOUNTED = false ]; then
         for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"
         do
-           mount -t cifs -o rw,iocharset=utf8,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break  || MOUNTED=false
-           for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5"
+           mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break  || MOUNTED=false
+           for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5" ",iocharset=utf8"
            do
-                mount -t cifs -o rw,iocharset=utf8,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
+                mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
            done
         done
       fi
 
+      # Test smbclient if not mounted yet
+      if [ $MOUNTED = false ]; then
+        smbclient -L $disk -U $CIFS_USERNAME%$CIFS_PASSWORD --option="client min protocol"="NT1" && \
+        bashio::log.info "Mounted with smbclient"
+      fi
+
       # Messages
       if [ $MOUNTED = true ]; then
         #Test write permissions
diff --git a/jellyfin/Dockerfile b/jellyfin/Dockerfile
index 1df524fd1..2cd3147df 100644
--- a/jellyfin/Dockerfile
+++ b/jellyfin/Dockerfile
@@ -12,6 +12,7 @@ RUN apt-get update \
     \
     && apt-get install -y --no-install-recommends \
     jq \
+    samba \
     \
     && apt-get -y upgrade cifs-utils \
     \
diff --git a/jellyfin/root/etc/cont-init.d/92-smb_mounts_v1.3.sh b/jellyfin/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
similarity index 78%
rename from jellyfin/root/etc/cont-init.d/92-smb_mounts_v1.3.sh
rename to jellyfin/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
index 2e5d11a4f..c9008b2be 100644
--- a/jellyfin/root/etc/cont-init.d/92-smb_mounts_v1.3.sh
+++ b/jellyfin/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
@@ -39,14 +39,20 @@ if bashio::config.has_value 'networkdisks'; then
       if [ $MOUNTED = false ]; then
         for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"
         do
-           mount -t cifs -o rw,iocharset=utf8,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break  || MOUNTED=false
-           for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5"
+           mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break  || MOUNTED=false
+           for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5" ",iocharset=utf8"
            do
-                mount -t cifs -o rw,iocharset=utf8,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
+                mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
            done
         done
       fi
 
+      # Test smbclient if not mounted yet
+      if [ $MOUNTED = false ]; then
+        smbclient -L $disk -U $CIFS_USERNAME%$CIFS_PASSWORD --option="client min protocol"="NT1" && \
+        bashio::log.info "Mounted with smbclient"
+      fi
+
       # Messages
       if [ $MOUNTED = true ]; then
         #Test write permissions
diff --git a/papermerge/Dockerfile b/papermerge/Dockerfile
index 9bae75c0e..0eff0d1d3 100644
--- a/papermerge/Dockerfile
+++ b/papermerge/Dockerfile
@@ -1,24 +1,33 @@
 ARG BUILD_FROM
 ARG BUILD_VERSION
 ARG BUILD_UPSTREAM="2.0.1"
+ARG BASHIO_VERSION=0.13.0
 
 FROM ${BUILD_FROM}${BUILD_UPSTREAM}
 
 # Add bashio
-RUN apt-get update \
+RUN \
+    ################
+    # Install apps #
+    ################
+    apt-get update \
     && apt-get install -y --no-install-recommends \
-    curl \
-    jq \
-    && curl -J -L -o /tmp/bashio.tar.gz \
-    "https://github.com/hassio-addons/bashio/archive/v0.13.0.tar.gz" \
-    && mkdir /tmp/bashio \
-    && tar zxvf \
-    /tmp/bashio.tar.gz \
-    --strip 1 -C /tmp/bashio \
-    \
+        jq \
+        curl \
+        cifs-utils \
+        keyutils \
+        samba \
+        plex \
+    \ 
+    ###################
+    # Install bashio #
+    ##################
+    && mkdir -p /tmp/bashio \
+    && curl -L -f -s "https://github.com/hassio-addons/bashio/archive/v${BASHIO_VERSION}.tar.gz" \
+    | tar -xzf - --strip 1 -C /tmp/bashio \
     && mv /tmp/bashio/lib /usr/lib/bashio \
     && ln -s /usr/lib/bashio/bashio /usr/bin/bashio \
-    && rm -fr /tmp/bashio.tar.gz
+    && rm -rf /tmp/bashio
 
 # Copy root filesystem
 COPY rootfs / 
diff --git a/papermerge/rootfs/etc/cont-init.d/92-smb_mounts_v1.3.sh b/papermerge/rootfs/etc/cont-init.d/92-smb_mounts_v1.3.sh
deleted file mode 100644
index 2e5d11a4f..000000000
--- a/papermerge/rootfs/etc/cont-init.d/92-smb_mounts_v1.3.sh
+++ /dev/null
@@ -1,62 +0,0 @@
-#!/usr/bin/with-contenv bashio
-
-####################
-# MOUNT SMB SHARES #
-####################
-if bashio::config.has_value 'networkdisks'; then
-    # Mount CIFS Share if configured and if Protection Mode is active
-    bashio::log.info 'Mounting smb share(s)...'
-
-    # Define variables 
-    MOREDISKS=$(bashio::config 'networkdisks')
-    CIFS_USERNAME=$(bashio::config 'cifsusername')
-    CIFS_PASSWORD=$(bashio::config 'cifspassword')
-    MOUNTED=false
-    SMBVERS=""
-    SECVERS=""
-
-    if bashio::config.has_value 'cifsdomain'; then 
-      DOMAIN=",domain=$(bashio::config 'cifsdomain')" 
-    else
-      DOMAIN=""
-    fi
- 
-    # Mounting disks
-    for disk in ${MOREDISKS//,/ }  # Separate comma separated values
-    do
-      # Clean name of network share
-      disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
-      diskname=${disk//\\//} #replace \ with /
-      diskname=${diskname##*/} # Get only last part of the name
-      # Prepare mount point
-      mkdir -p /mnt/$diskname
-      chown -R root:root /mnt/$diskname
-      
-      #Tries to mount with default options
-      mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
-      
-      # if Fail test different smb and sec versions
-      if [ $MOUNTED = false ]; then
-        for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"
-        do
-           mount -t cifs -o rw,iocharset=utf8,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break  || MOUNTED=false
-           for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5"
-           do
-                mount -t cifs -o rw,iocharset=utf8,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
-           done
-        done
-      fi
-
-      # Messages
-      if [ $MOUNTED = true ]; then
-        #Test write permissions
-        touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw" 
-      else
-        # message if still fail
-        bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
-        bashio::log.fatal "Error read : $(<ERRORCODE)" # Mount share
-        rm ERRORCODE
-      fi
-
-    done
-fi
diff --git a/papermerge/rootfs/etc/cont-init.d/92-smb_mounts_v1.4.sh b/papermerge/rootfs/etc/cont-init.d/92-smb_mounts_v1.4.sh
new file mode 100644
index 000000000..c9008b2be
--- /dev/null
+++ b/papermerge/rootfs/etc/cont-init.d/92-smb_mounts_v1.4.sh
@@ -0,0 +1,68 @@
+#!/usr/bin/with-contenv bashio
+
+####################
+# MOUNT SMB SHARES #
+####################
+if bashio::config.has_value 'networkdisks'; then
+    # Mount CIFS Share if configured and if Protection Mode is active
+    bashio::log.info 'Mounting smb share(s)...'
+
+    # Define variables 
+    MOREDISKS=$(bashio::config 'networkdisks')
+    CIFS_USERNAME=$(bashio::config 'cifsusername')
+    CIFS_PASSWORD=$(bashio::config 'cifspassword')
+    MOUNTED=false
+    SMBVERS=""
+    SECVERS=""
+
+    if bashio::config.has_value 'cifsdomain'; then 
+      DOMAIN=",domain=$(bashio::config 'cifsdomain')" 
+    else
+      DOMAIN=""
+    fi
+ 
+    # Mounting disks
+    for disk in ${MOREDISKS//,/ }  # Separate comma separated values
+    do
+      # Clean name of network share
+      disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
+      diskname=${disk//\\//} #replace \ with /
+      diskname=${diskname##*/} # Get only last part of the name
+      # Prepare mount point
+      mkdir -p /mnt/$diskname
+      chown -R root:root /mnt/$diskname
+      
+      #Tries to mount with default options
+      mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
+      
+      # if Fail test different smb and sec versions
+      if [ $MOUNTED = false ]; then
+        for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"
+        do
+           mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break  || MOUNTED=false
+           for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5" ",iocharset=utf8"
+           do
+                mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
+           done
+        done
+      fi
+
+      # Test smbclient if not mounted yet
+      if [ $MOUNTED = false ]; then
+        smbclient -L $disk -U $CIFS_USERNAME%$CIFS_PASSWORD --option="client min protocol"="NT1" && \
+        bashio::log.info "Mounted with smbclient"
+      fi
+
+      # Messages
+      if [ $MOUNTED = true ]; then
+        #Test write permissions
+        touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw" 
+      else
+        # message if still fail
+        bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
+        bashio::log.fatal "Error read : $(<ERRORCODE)" # Mount share
+        rm ERRORCODE
+      fi
+
+    done
+fi
diff --git a/plex/Dockerfile b/plex/Dockerfile
index da17bc8e7..a17f7a070 100644
--- a/plex/Dockerfile
+++ b/plex/Dockerfile
@@ -1,35 +1,35 @@
 ARG BUILD_FROM
 ARG BUILD_VERSION
 ARG BUILD_UPSTREAM="1.23.5.4862-0f739d462-ls64"
+ARG BASHIO_VERSION=0.13.0
 
 FROM ${BUILD_FROM}${BUILD_UPSTREAM}
 
 # Set shell
 SHELL ["/bin/bash", "-o", "pipefail", "-c"]
 
-RUN apt-get update \
-    \
-    && apt-get install -y --no-install-recommends \
-    jq \
-    \
-    && apt-get -y upgrade cifs-utils \
-    && curl -J -L -o /tmp/bashio.tar.gz \
-    "https://github.com/hassio-addons/bashio/archive/v0.7.1.tar.gz" \
-    && mkdir /tmp/bashio \
-    && tar zxvf \
-    /tmp/bashio.tar.gz \
-    --strip 1 -C /tmp/bashio \
-    \
+RUN \
+    ################
+    # Install apps #
+    ################
+    apt-get update \
+    && apt-get install -y \
+        jq \
+        curl \
+        cifs-utils \
+        keyutils \
+        samba \
+        plex \
+    \ 
+    ###################
+    # Install bashio #
+    ##################
+    && mkdir -p /tmp/bashio \
+    && curl -L -f -s "https://github.com/hassio-addons/bashio/archive/v${BASHIO_VERSION}.tar.gz" \
+    | tar -xzf - --strip 1 -C /tmp/bashio \
     && mv /tmp/bashio/lib /usr/lib/bashio \
     && ln -s /usr/lib/bashio/bashio /usr/bin/bashio \
-    && rm -fr \
-    /tmp/* \
-    /var/{cache,log}/* \
-    /var/lib/apt/lists/*
-    # Allow UID and GID setting
-    #&& sed -i 's/bash/bashio/g' /etc/cont-init.d/10-adduser \
-    #&& sed -i 's/{PUID:-911}/(bashio::config "PUID")/g' /etc/cont-init.d/10-adduser \
-    #&& sed -i 's/{PGID:-911}/(bashio::config "PGID")/g' /etc/cont-init.d/10-adduser
+    && rm -rf /tmp/bashio
 
 RUN grep -rl '/config' /etc/cont-init.d/ | xargs sed -i 's|/config|/config/plex|g'  #change config folder
 
diff --git a/plex/root/etc/cont-init.d/92-smb_mounts_v1.4.sh b/plex/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
new file mode 100644
index 000000000..c9008b2be
--- /dev/null
+++ b/plex/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
@@ -0,0 +1,68 @@
+#!/usr/bin/with-contenv bashio
+
+####################
+# MOUNT SMB SHARES #
+####################
+if bashio::config.has_value 'networkdisks'; then
+    # Mount CIFS Share if configured and if Protection Mode is active
+    bashio::log.info 'Mounting smb share(s)...'
+
+    # Define variables 
+    MOREDISKS=$(bashio::config 'networkdisks')
+    CIFS_USERNAME=$(bashio::config 'cifsusername')
+    CIFS_PASSWORD=$(bashio::config 'cifspassword')
+    MOUNTED=false
+    SMBVERS=""
+    SECVERS=""
+
+    if bashio::config.has_value 'cifsdomain'; then 
+      DOMAIN=",domain=$(bashio::config 'cifsdomain')" 
+    else
+      DOMAIN=""
+    fi
+ 
+    # Mounting disks
+    for disk in ${MOREDISKS//,/ }  # Separate comma separated values
+    do
+      # Clean name of network share
+      disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
+      diskname=${disk//\\//} #replace \ with /
+      diskname=${diskname##*/} # Get only last part of the name
+      # Prepare mount point
+      mkdir -p /mnt/$diskname
+      chown -R root:root /mnt/$diskname
+      
+      #Tries to mount with default options
+      mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
+      
+      # if Fail test different smb and sec versions
+      if [ $MOUNTED = false ]; then
+        for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"
+        do
+           mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break  || MOUNTED=false
+           for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5" ",iocharset=utf8"
+           do
+                mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
+           done
+        done
+      fi
+
+      # Test smbclient if not mounted yet
+      if [ $MOUNTED = false ]; then
+        smbclient -L $disk -U $CIFS_USERNAME%$CIFS_PASSWORD --option="client min protocol"="NT1" && \
+        bashio::log.info "Mounted with smbclient"
+      fi
+
+      # Messages
+      if [ $MOUNTED = true ]; then
+        #Test write permissions
+        touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw" 
+      else
+        # message if still fail
+        bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
+        bashio::log.fatal "Error read : $(<ERRORCODE)" # Mount share
+        rm ERRORCODE
+      fi
+
+    done
+fi
diff --git a/prowlarr/Dockerfile b/prowlarr/Dockerfile
index 950fd3537..dbd9cee6f 100644
--- a/prowlarr/Dockerfile
+++ b/prowlarr/Dockerfile
@@ -14,6 +14,7 @@ RUN \
         curl \
         cifs-utils \
         keyutils \
+        samba \
     \ 
     ###################
     # Install bashio #
diff --git a/prowlarr/root/etc/cont-init.d/92-smb_mounts_v1.3.sh b/prowlarr/root/etc/cont-init.d/92-smb_mounts_v1.3.sh
deleted file mode 100644
index 2e5d11a4f..000000000
--- a/prowlarr/root/etc/cont-init.d/92-smb_mounts_v1.3.sh
+++ /dev/null
@@ -1,62 +0,0 @@
-#!/usr/bin/with-contenv bashio
-
-####################
-# MOUNT SMB SHARES #
-####################
-if bashio::config.has_value 'networkdisks'; then
-    # Mount CIFS Share if configured and if Protection Mode is active
-    bashio::log.info 'Mounting smb share(s)...'
-
-    # Define variables 
-    MOREDISKS=$(bashio::config 'networkdisks')
-    CIFS_USERNAME=$(bashio::config 'cifsusername')
-    CIFS_PASSWORD=$(bashio::config 'cifspassword')
-    MOUNTED=false
-    SMBVERS=""
-    SECVERS=""
-
-    if bashio::config.has_value 'cifsdomain'; then 
-      DOMAIN=",domain=$(bashio::config 'cifsdomain')" 
-    else
-      DOMAIN=""
-    fi
- 
-    # Mounting disks
-    for disk in ${MOREDISKS//,/ }  # Separate comma separated values
-    do
-      # Clean name of network share
-      disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
-      diskname=${disk//\\//} #replace \ with /
-      diskname=${diskname##*/} # Get only last part of the name
-      # Prepare mount point
-      mkdir -p /mnt/$diskname
-      chown -R root:root /mnt/$diskname
-      
-      #Tries to mount with default options
-      mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
-      
-      # if Fail test different smb and sec versions
-      if [ $MOUNTED = false ]; then
-        for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"
-        do
-           mount -t cifs -o rw,iocharset=utf8,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break  || MOUNTED=false
-           for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5"
-           do
-                mount -t cifs -o rw,iocharset=utf8,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
-           done
-        done
-      fi
-
-      # Messages
-      if [ $MOUNTED = true ]; then
-        #Test write permissions
-        touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw" 
-      else
-        # message if still fail
-        bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
-        bashio::log.fatal "Error read : $(<ERRORCODE)" # Mount share
-        rm ERRORCODE
-      fi
-
-    done
-fi
diff --git a/prowlarr/root/etc/cont-init.d/92-smb_mounts_v1.4.sh b/prowlarr/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
new file mode 100644
index 000000000..c9008b2be
--- /dev/null
+++ b/prowlarr/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
@@ -0,0 +1,68 @@
+#!/usr/bin/with-contenv bashio
+
+####################
+# MOUNT SMB SHARES #
+####################
+if bashio::config.has_value 'networkdisks'; then
+    # Mount CIFS Share if configured and if Protection Mode is active
+    bashio::log.info 'Mounting smb share(s)...'
+
+    # Define variables 
+    MOREDISKS=$(bashio::config 'networkdisks')
+    CIFS_USERNAME=$(bashio::config 'cifsusername')
+    CIFS_PASSWORD=$(bashio::config 'cifspassword')
+    MOUNTED=false
+    SMBVERS=""
+    SECVERS=""
+
+    if bashio::config.has_value 'cifsdomain'; then 
+      DOMAIN=",domain=$(bashio::config 'cifsdomain')" 
+    else
+      DOMAIN=""
+    fi
+ 
+    # Mounting disks
+    for disk in ${MOREDISKS//,/ }  # Separate comma separated values
+    do
+      # Clean name of network share
+      disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
+      diskname=${disk//\\//} #replace \ with /
+      diskname=${diskname##*/} # Get only last part of the name
+      # Prepare mount point
+      mkdir -p /mnt/$diskname
+      chown -R root:root /mnt/$diskname
+      
+      #Tries to mount with default options
+      mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
+      
+      # if Fail test different smb and sec versions
+      if [ $MOUNTED = false ]; then
+        for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"
+        do
+           mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break  || MOUNTED=false
+           for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5" ",iocharset=utf8"
+           do
+                mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
+           done
+        done
+      fi
+
+      # Test smbclient if not mounted yet
+      if [ $MOUNTED = false ]; then
+        smbclient -L $disk -U $CIFS_USERNAME%$CIFS_PASSWORD --option="client min protocol"="NT1" && \
+        bashio::log.info "Mounted with smbclient"
+      fi
+
+      # Messages
+      if [ $MOUNTED = true ]; then
+        #Test write permissions
+        touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw" 
+      else
+        # message if still fail
+        bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
+        bashio::log.fatal "Error read : $(<ERRORCODE)" # Mount share
+        rm ERRORCODE
+      fi
+
+    done
+fi
diff --git a/qbittorrent/Dockerfile b/qbittorrent/Dockerfile
index 48be61549..603112b05 100644
--- a/qbittorrent/Dockerfile
+++ b/qbittorrent/Dockerfile
@@ -25,6 +25,17 @@ RUN \
         nginx \
         coreutils \
         openvpn \
+    # Backup if change
+        || apk add --no-cache \
+            apt-transport-https \
+            jq \
+            curl \
+            cifs-utils \
+            keyutils \
+            samba \
+            nginx \
+            coreutils \
+            openvpn \
     \    
     ##################
     # Install tempio #
diff --git a/radarr/Dockerfile b/radarr/Dockerfile
index 807098d11..fb27538ee 100644
--- a/radarr/Dockerfile
+++ b/radarr/Dockerfile
@@ -5,7 +5,7 @@ FROM ${BUILD_FROM}${BUILD_UPSTREAM}
 ARG BASHIO_VERSION=0.13.0
 
 RUN \
-    ################
+     ################
     # Install apps #
     ################
     apt-get update \
@@ -14,6 +14,7 @@ RUN \
         curl \
         cifs-utils \
         keyutils \
+        samba \
     \ 
     ###################
     # Install bashio #
diff --git a/radarr/root/etc/cont-init.d/92-smb_mounts_v1.3.sh b/radarr/root/etc/cont-init.d/92-smb_mounts_v1.3.sh
deleted file mode 100644
index 2e5d11a4f..000000000
--- a/radarr/root/etc/cont-init.d/92-smb_mounts_v1.3.sh
+++ /dev/null
@@ -1,62 +0,0 @@
-#!/usr/bin/with-contenv bashio
-
-####################
-# MOUNT SMB SHARES #
-####################
-if bashio::config.has_value 'networkdisks'; then
-    # Mount CIFS Share if configured and if Protection Mode is active
-    bashio::log.info 'Mounting smb share(s)...'
-
-    # Define variables 
-    MOREDISKS=$(bashio::config 'networkdisks')
-    CIFS_USERNAME=$(bashio::config 'cifsusername')
-    CIFS_PASSWORD=$(bashio::config 'cifspassword')
-    MOUNTED=false
-    SMBVERS=""
-    SECVERS=""
-
-    if bashio::config.has_value 'cifsdomain'; then 
-      DOMAIN=",domain=$(bashio::config 'cifsdomain')" 
-    else
-      DOMAIN=""
-    fi
- 
-    # Mounting disks
-    for disk in ${MOREDISKS//,/ }  # Separate comma separated values
-    do
-      # Clean name of network share
-      disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
-      diskname=${disk//\\//} #replace \ with /
-      diskname=${diskname##*/} # Get only last part of the name
-      # Prepare mount point
-      mkdir -p /mnt/$diskname
-      chown -R root:root /mnt/$diskname
-      
-      #Tries to mount with default options
-      mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
-      
-      # if Fail test different smb and sec versions
-      if [ $MOUNTED = false ]; then
-        for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"
-        do
-           mount -t cifs -o rw,iocharset=utf8,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break  || MOUNTED=false
-           for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5"
-           do
-                mount -t cifs -o rw,iocharset=utf8,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
-           done
-        done
-      fi
-
-      # Messages
-      if [ $MOUNTED = true ]; then
-        #Test write permissions
-        touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw" 
-      else
-        # message if still fail
-        bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
-        bashio::log.fatal "Error read : $(<ERRORCODE)" # Mount share
-        rm ERRORCODE
-      fi
-
-    done
-fi
diff --git a/radarr/root/etc/cont-init.d/92-smb_mounts_v1.4.sh b/radarr/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
new file mode 100644
index 000000000..c9008b2be
--- /dev/null
+++ b/radarr/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
@@ -0,0 +1,68 @@
+#!/usr/bin/with-contenv bashio
+
+####################
+# MOUNT SMB SHARES #
+####################
+if bashio::config.has_value 'networkdisks'; then
+    # Mount CIFS Share if configured and if Protection Mode is active
+    bashio::log.info 'Mounting smb share(s)...'
+
+    # Define variables 
+    MOREDISKS=$(bashio::config 'networkdisks')
+    CIFS_USERNAME=$(bashio::config 'cifsusername')
+    CIFS_PASSWORD=$(bashio::config 'cifspassword')
+    MOUNTED=false
+    SMBVERS=""
+    SECVERS=""
+
+    if bashio::config.has_value 'cifsdomain'; then 
+      DOMAIN=",domain=$(bashio::config 'cifsdomain')" 
+    else
+      DOMAIN=""
+    fi
+ 
+    # Mounting disks
+    for disk in ${MOREDISKS//,/ }  # Separate comma separated values
+    do
+      # Clean name of network share
+      disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
+      diskname=${disk//\\//} #replace \ with /
+      diskname=${diskname##*/} # Get only last part of the name
+      # Prepare mount point
+      mkdir -p /mnt/$diskname
+      chown -R root:root /mnt/$diskname
+      
+      #Tries to mount with default options
+      mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
+      
+      # if Fail test different smb and sec versions
+      if [ $MOUNTED = false ]; then
+        for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"
+        do
+           mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break  || MOUNTED=false
+           for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5" ",iocharset=utf8"
+           do
+                mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
+           done
+        done
+      fi
+
+      # Test smbclient if not mounted yet
+      if [ $MOUNTED = false ]; then
+        smbclient -L $disk -U $CIFS_USERNAME%$CIFS_PASSWORD --option="client min protocol"="NT1" && \
+        bashio::log.info "Mounted with smbclient"
+      fi
+
+      # Messages
+      if [ $MOUNTED = true ]; then
+        #Test write permissions
+        touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw" 
+      else
+        # message if still fail
+        bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
+        bashio::log.fatal "Error read : $(<ERRORCODE)" # Mount share
+        rm ERRORCODE
+      fi
+
+    done
+fi
diff --git a/sonarr/Dockerfile b/sonarr/Dockerfile
index bd7aa0a37..c4ae2a5a4 100644
--- a/sonarr/Dockerfile
+++ b/sonarr/Dockerfile
@@ -14,6 +14,7 @@ RUN \
         curl \
         cifs-utils \
         keyutils \
+        samba \
     \ 
     ##################
     # Install bashio #
diff --git a/sonarr/root/etc/cont-init.d/92-smb_mounts_v1.3.sh b/sonarr/root/etc/cont-init.d/92-smb_mounts_v1.3.sh
deleted file mode 100644
index 2e5d11a4f..000000000
--- a/sonarr/root/etc/cont-init.d/92-smb_mounts_v1.3.sh
+++ /dev/null
@@ -1,62 +0,0 @@
-#!/usr/bin/with-contenv bashio
-
-####################
-# MOUNT SMB SHARES #
-####################
-if bashio::config.has_value 'networkdisks'; then
-    # Mount CIFS Share if configured and if Protection Mode is active
-    bashio::log.info 'Mounting smb share(s)...'
-
-    # Define variables 
-    MOREDISKS=$(bashio::config 'networkdisks')
-    CIFS_USERNAME=$(bashio::config 'cifsusername')
-    CIFS_PASSWORD=$(bashio::config 'cifspassword')
-    MOUNTED=false
-    SMBVERS=""
-    SECVERS=""
-
-    if bashio::config.has_value 'cifsdomain'; then 
-      DOMAIN=",domain=$(bashio::config 'cifsdomain')" 
-    else
-      DOMAIN=""
-    fi
- 
-    # Mounting disks
-    for disk in ${MOREDISKS//,/ }  # Separate comma separated values
-    do
-      # Clean name of network share
-      disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
-      diskname=${disk//\\//} #replace \ with /
-      diskname=${diskname##*/} # Get only last part of the name
-      # Prepare mount point
-      mkdir -p /mnt/$diskname
-      chown -R root:root /mnt/$diskname
-      
-      #Tries to mount with default options
-      mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
-      
-      # if Fail test different smb and sec versions
-      if [ $MOUNTED = false ]; then
-        for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"
-        do
-           mount -t cifs -o rw,iocharset=utf8,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break  || MOUNTED=false
-           for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5"
-           do
-                mount -t cifs -o rw,iocharset=utf8,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
-           done
-        done
-      fi
-
-      # Messages
-      if [ $MOUNTED = true ]; then
-        #Test write permissions
-        touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw" 
-      else
-        # message if still fail
-        bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
-        bashio::log.fatal "Error read : $(<ERRORCODE)" # Mount share
-        rm ERRORCODE
-      fi
-
-    done
-fi
diff --git a/sonarr/root/etc/cont-init.d/92-smb_mounts_v1.4.sh b/sonarr/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
new file mode 100644
index 000000000..c9008b2be
--- /dev/null
+++ b/sonarr/root/etc/cont-init.d/92-smb_mounts_v1.4.sh
@@ -0,0 +1,68 @@
+#!/usr/bin/with-contenv bashio
+
+####################
+# MOUNT SMB SHARES #
+####################
+if bashio::config.has_value 'networkdisks'; then
+    # Mount CIFS Share if configured and if Protection Mode is active
+    bashio::log.info 'Mounting smb share(s)...'
+
+    # Define variables 
+    MOREDISKS=$(bashio::config 'networkdisks')
+    CIFS_USERNAME=$(bashio::config 'cifsusername')
+    CIFS_PASSWORD=$(bashio::config 'cifspassword')
+    MOUNTED=false
+    SMBVERS=""
+    SECVERS=""
+
+    if bashio::config.has_value 'cifsdomain'; then 
+      DOMAIN=",domain=$(bashio::config 'cifsdomain')" 
+    else
+      DOMAIN=""
+    fi
+ 
+    # Mounting disks
+    for disk in ${MOREDISKS//,/ }  # Separate comma separated values
+    do
+      # Clean name of network share
+      disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
+      diskname=${disk//\\//} #replace \ with /
+      diskname=${diskname##*/} # Get only last part of the name
+      # Prepare mount point
+      mkdir -p /mnt/$diskname
+      chown -R root:root /mnt/$diskname
+      
+      #Tries to mount with default options
+      mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
+      
+      # if Fail test different smb and sec versions
+      if [ $MOUNTED = false ]; then
+        for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"
+        do
+           mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break  || MOUNTED=false
+           for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5" ",iocharset=utf8"
+           do
+                mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
+           done
+        done
+      fi
+
+      # Test smbclient if not mounted yet
+      if [ $MOUNTED = false ]; then
+        smbclient -L $disk -U $CIFS_USERNAME%$CIFS_PASSWORD --option="client min protocol"="NT1" && \
+        bashio::log.info "Mounted with smbclient"
+      fi
+
+      # Messages
+      if [ $MOUNTED = true ]; then
+        #Test write permissions
+        touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw" 
+      else
+        # message if still fail
+        bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
+        bashio::log.fatal "Error read : $(<ERRORCODE)" # Mount share
+        rm ERRORCODE
+      fi
+
+    done
+fi
diff --git a/transmission/Dockerfile b/transmission/Dockerfile
index db0867331..b71e838f3 100644
--- a/transmission/Dockerfile
+++ b/transmission/Dockerfile
@@ -7,6 +7,7 @@ FROM ${BUILD_FROM}${BUILD_UPSTREAM}
 RUN apk add --no-cache \
     curl \
     jq \
+    samba \
     && curl -J -L -o /tmp/bashio.tar.gz \
     "https://github.com/hassio-addons/bashio/archive/v0.13.0.tar.gz" \
     && mkdir /tmp/bashio \
diff --git a/transmission/rootfs/etc/cont-init.d/92-smb_mounts_v1.3.sh b/transmission/rootfs/etc/cont-init.d/92-smb_mounts_v1.3.sh
deleted file mode 100644
index 2e5d11a4f..000000000
--- a/transmission/rootfs/etc/cont-init.d/92-smb_mounts_v1.3.sh
+++ /dev/null
@@ -1,62 +0,0 @@
-#!/usr/bin/with-contenv bashio
-
-####################
-# MOUNT SMB SHARES #
-####################
-if bashio::config.has_value 'networkdisks'; then
-    # Mount CIFS Share if configured and if Protection Mode is active
-    bashio::log.info 'Mounting smb share(s)...'
-
-    # Define variables 
-    MOREDISKS=$(bashio::config 'networkdisks')
-    CIFS_USERNAME=$(bashio::config 'cifsusername')
-    CIFS_PASSWORD=$(bashio::config 'cifspassword')
-    MOUNTED=false
-    SMBVERS=""
-    SECVERS=""
-
-    if bashio::config.has_value 'cifsdomain'; then 
-      DOMAIN=",domain=$(bashio::config 'cifsdomain')" 
-    else
-      DOMAIN=""
-    fi
- 
-    # Mounting disks
-    for disk in ${MOREDISKS//,/ }  # Separate comma separated values
-    do
-      # Clean name of network share
-      disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
-      diskname=${disk//\\//} #replace \ with /
-      diskname=${diskname##*/} # Get only last part of the name
-      # Prepare mount point
-      mkdir -p /mnt/$diskname
-      chown -R root:root /mnt/$diskname
-      
-      #Tries to mount with default options
-      mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
-      
-      # if Fail test different smb and sec versions
-      if [ $MOUNTED = false ]; then
-        for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"
-        do
-           mount -t cifs -o rw,iocharset=utf8,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break  || MOUNTED=false
-           for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5"
-           do
-                mount -t cifs -o rw,iocharset=utf8,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
-           done
-        done
-      fi
-
-      # Messages
-      if [ $MOUNTED = true ]; then
-        #Test write permissions
-        touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw" 
-      else
-        # message if still fail
-        bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
-        bashio::log.fatal "Error read : $(<ERRORCODE)" # Mount share
-        rm ERRORCODE
-      fi
-
-    done
-fi
diff --git a/transmission/rootfs/etc/cont-init.d/92-smb_mounts_v1.4.sh b/transmission/rootfs/etc/cont-init.d/92-smb_mounts_v1.4.sh
new file mode 100644
index 000000000..c9008b2be
--- /dev/null
+++ b/transmission/rootfs/etc/cont-init.d/92-smb_mounts_v1.4.sh
@@ -0,0 +1,68 @@
+#!/usr/bin/with-contenv bashio
+
+####################
+# MOUNT SMB SHARES #
+####################
+if bashio::config.has_value 'networkdisks'; then
+    # Mount CIFS Share if configured and if Protection Mode is active
+    bashio::log.info 'Mounting smb share(s)...'
+
+    # Define variables 
+    MOREDISKS=$(bashio::config 'networkdisks')
+    CIFS_USERNAME=$(bashio::config 'cifsusername')
+    CIFS_PASSWORD=$(bashio::config 'cifspassword')
+    MOUNTED=false
+    SMBVERS=""
+    SECVERS=""
+
+    if bashio::config.has_value 'cifsdomain'; then 
+      DOMAIN=",domain=$(bashio::config 'cifsdomain')" 
+    else
+      DOMAIN=""
+    fi
+ 
+    # Mounting disks
+    for disk in ${MOREDISKS//,/ }  # Separate comma separated values
+    do
+      # Clean name of network share
+      disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
+      diskname=${disk//\\//} #replace \ with /
+      diskname=${diskname##*/} # Get only last part of the name
+      # Prepare mount point
+      mkdir -p /mnt/$diskname
+      chown -R root:root /mnt/$diskname
+      
+      #Tries to mount with default options
+      mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
+      
+      # if Fail test different smb and sec versions
+      if [ $MOUNTED = false ]; then
+        for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"
+        do
+           mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break  || MOUNTED=false
+           for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5" ",iocharset=utf8"
+           do
+                mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
+           done
+        done
+      fi
+
+      # Test smbclient if not mounted yet
+      if [ $MOUNTED = false ]; then
+        smbclient -L $disk -U $CIFS_USERNAME%$CIFS_PASSWORD --option="client min protocol"="NT1" && \
+        bashio::log.info "Mounted with smbclient"
+      fi
+
+      # Messages
+      if [ $MOUNTED = true ]; then
+        #Test write permissions
+        touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw" 
+      else
+        # message if still fail
+        bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
+        bashio::log.fatal "Error read : $(<ERRORCODE)" # Mount share
+        rm ERRORCODE
+      fi
+
+    done
+fi
diff --git a/ubooquity/Dockerfile b/ubooquity/Dockerfile
index e0bc1e9d7..42b49ddb5 100644
--- a/ubooquity/Dockerfile
+++ b/ubooquity/Dockerfile
@@ -11,6 +11,7 @@ RUN apk add --no-cache \
     curl \
     jq \
     moreutils \
+	samba \
     && curl -J -L -o /tmp/bashio.tar.gz \
     "https://github.com/hassio-addons/bashio/archive/v0.13.0.tar.gz" \
     && mkdir /tmp/bashio \
diff --git a/ubooquity/rootfs/etc/cont-init.d/92-smb_mounts_v1.3.sh b/ubooquity/rootfs/etc/cont-init.d/92-smb_mounts_v1.3.sh
deleted file mode 100644
index 2e5d11a4f..000000000
--- a/ubooquity/rootfs/etc/cont-init.d/92-smb_mounts_v1.3.sh
+++ /dev/null
@@ -1,62 +0,0 @@
-#!/usr/bin/with-contenv bashio
-
-####################
-# MOUNT SMB SHARES #
-####################
-if bashio::config.has_value 'networkdisks'; then
-    # Mount CIFS Share if configured and if Protection Mode is active
-    bashio::log.info 'Mounting smb share(s)...'
-
-    # Define variables 
-    MOREDISKS=$(bashio::config 'networkdisks')
-    CIFS_USERNAME=$(bashio::config 'cifsusername')
-    CIFS_PASSWORD=$(bashio::config 'cifspassword')
-    MOUNTED=false
-    SMBVERS=""
-    SECVERS=""
-
-    if bashio::config.has_value 'cifsdomain'; then 
-      DOMAIN=",domain=$(bashio::config 'cifsdomain')" 
-    else
-      DOMAIN=""
-    fi
- 
-    # Mounting disks
-    for disk in ${MOREDISKS//,/ }  # Separate comma separated values
-    do
-      # Clean name of network share
-      disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
-      diskname=${disk//\\//} #replace \ with /
-      diskname=${diskname##*/} # Get only last part of the name
-      # Prepare mount point
-      mkdir -p /mnt/$diskname
-      chown -R root:root /mnt/$diskname
-      
-      #Tries to mount with default options
-      mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
-      
-      # if Fail test different smb and sec versions
-      if [ $MOUNTED = false ]; then
-        for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"
-        do
-           mount -t cifs -o rw,iocharset=utf8,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break  || MOUNTED=false
-           for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5"
-           do
-                mount -t cifs -o rw,iocharset=utf8,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
-           done
-        done
-      fi
-
-      # Messages
-      if [ $MOUNTED = true ]; then
-        #Test write permissions
-        touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw" 
-      else
-        # message if still fail
-        bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
-        bashio::log.fatal "Error read : $(<ERRORCODE)" # Mount share
-        rm ERRORCODE
-      fi
-
-    done
-fi
diff --git a/ubooquity/rootfs/etc/cont-init.d/92-smb_mounts_v1.4.sh b/ubooquity/rootfs/etc/cont-init.d/92-smb_mounts_v1.4.sh
new file mode 100644
index 000000000..c9008b2be
--- /dev/null
+++ b/ubooquity/rootfs/etc/cont-init.d/92-smb_mounts_v1.4.sh
@@ -0,0 +1,68 @@
+#!/usr/bin/with-contenv bashio
+
+####################
+# MOUNT SMB SHARES #
+####################
+if bashio::config.has_value 'networkdisks'; then
+    # Mount CIFS Share if configured and if Protection Mode is active
+    bashio::log.info 'Mounting smb share(s)...'
+
+    # Define variables 
+    MOREDISKS=$(bashio::config 'networkdisks')
+    CIFS_USERNAME=$(bashio::config 'cifsusername')
+    CIFS_PASSWORD=$(bashio::config 'cifspassword')
+    MOUNTED=false
+    SMBVERS=""
+    SECVERS=""
+
+    if bashio::config.has_value 'cifsdomain'; then 
+      DOMAIN=",domain=$(bashio::config 'cifsdomain')" 
+    else
+      DOMAIN=""
+    fi
+ 
+    # Mounting disks
+    for disk in ${MOREDISKS//,/ }  # Separate comma separated values
+    do
+      # Clean name of network share
+      disk=$(echo $disk | sed "s,/$,,") # Remove / at end of name
+      diskname=${disk//\\//} #replace \ with /
+      diskname=${diskname##*/} # Get only last part of the name
+      # Prepare mount point
+      mkdir -p /mnt/$diskname
+      chown -R root:root /mnt/$diskname
+      
+      #Tries to mount with default options
+      mount -t cifs -o rw,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$DOMAIN $disk /mnt/$diskname 2>ERRORCODE && MOUNTED=true || MOUNTED=false
+      
+      # if Fail test different smb and sec versions
+      if [ $MOUNTED = false ]; then
+        for SMBVERS in ",vers=3" ",vers=1.0" ",vers=2.1" ",vers=3.0" ",nodfs" ",uid=0,gid=0,forceuid,forcegid" ",noforceuid,noforcegid" ",${DOMAIN}"
+        do
+           mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS $disk /mnt/$diskname 2>/dev/null && MOUNTED=true && break  || MOUNTED=false
+           for SECVERS in ",sec=ntlmi" ",sec=ntlmv2" ",sec=ntlmv2i" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=ntlm" ",sec=krb5i" ",sec=krb5" ",iocharset=utf8"
+           do
+                mount -t cifs -o rw,file_mode=0777,dir_mode=0777,username=$CIFS_USERNAME,password=${CIFS_PASSWORD}$SMBVERS$SECVERS $disk /mnt/$disk name 2>/dev/null && MOUNTED=true && break 2 && break || MOUNTED=false
+           done
+        done
+      fi
+
+      # Test smbclient if not mounted yet
+      if [ $MOUNTED = false ]; then
+        smbclient -L $disk -U $CIFS_USERNAME%$CIFS_PASSWORD --option="client min protocol"="NT1" && \
+        bashio::log.info "Mounted with smbclient"
+      fi
+
+      # Messages
+      if [ $MOUNTED = true ]; then
+        #Test write permissions
+        touch /mnt/$diskname/testaze && rm /mnt/$diskname/testaze && bashio::log.info "... $disk successfully mounted to /mnt/$diskname with options $SMBVERS$SECVERS" || bashio::log.fatal "Disk is mounted, however unable to write in the shared disk. Please check UID/GID for permissions, and if the share is rw" 
+      else
+        # message if still fail
+        bashio::log.fatal "Unable to mount $disk to /mnt/$diskname with username $CIFS_USERNAME, $CIFS_PASSWORD. Please check your remote share path, username, password, domain, try putting 0 in UID and GID" # Mount share
+        bashio::log.fatal "Error read : $(<ERRORCODE)" # Mount share
+        rm ERRORCODE
+      fi
+
+    done
+fi