diff --git a/bazarr/Dockerfile b/bazarr/Dockerfile
index df0282312..708b6d1b9 100644
--- a/bazarr/Dockerfile
+++ b/bazarr/Dockerfile
@@ -35,10 +35,10 @@ RUN \
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
     # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
     \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
diff --git a/booksonic_air/Dockerfile b/booksonic_air/Dockerfile
index e7d501f47..d7fc549ab 100644
--- a/booksonic_air/Dockerfile
+++ b/booksonic_air/Dockerfile
@@ -37,10 +37,10 @@ RUN \
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
     # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
     \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
diff --git a/calibre/Dockerfile b/calibre/Dockerfile
index e7f3c93b8..ce1abc10b 100644
--- a/calibre/Dockerfile
+++ b/calibre/Dockerfile
@@ -36,10 +36,10 @@ RUN \
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
     # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
     \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
diff --git a/calibre_web/Dockerfile b/calibre_web/Dockerfile
index bdad8b76b..19ec0bfef 100644
--- a/calibre_web/Dockerfile
+++ b/calibre_web/Dockerfile
@@ -36,10 +36,10 @@ RUN \
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
     # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
     \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
diff --git a/code-server/Dockerfile b/code-server/Dockerfile
index bf947a7c6..563f6dd28 100644
--- a/code-server/Dockerfile
+++ b/code-server/Dockerfile
@@ -35,10 +35,10 @@ RUN \
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
     # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
     \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
diff --git a/emby/Dockerfile b/emby/Dockerfile
index ce590f92b..319c43020 100644
--- a/emby/Dockerfile
+++ b/emby/Dockerfile
@@ -35,10 +35,10 @@ RUN \
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
     # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
     \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
diff --git a/flexget/Dockerfile b/flexget/Dockerfile
index 3663a06cd..504aa4317 100644
--- a/flexget/Dockerfile
+++ b/flexget/Dockerfile
@@ -45,10 +45,10 @@ RUN \
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
     # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
     \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
diff --git a/grav/Dockerfile b/grav/Dockerfile
index e9fef5e1c..71265bc23 100644
--- a/grav/Dockerfile
+++ b/grav/Dockerfile
@@ -35,10 +35,10 @@ RUN \
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
     # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
     \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
diff --git a/jackett/Dockerfile b/jackett/Dockerfile
index 48b3674b2..a6534dd6a 100644
--- a/jackett/Dockerfile
+++ b/jackett/Dockerfile
@@ -35,10 +35,10 @@ RUN \
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
     # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
     \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
diff --git a/jellyfin/Dockerfile b/jellyfin/Dockerfile
index a5c2561d1..5cb045f78 100644
--- a/jellyfin/Dockerfile
+++ b/jellyfin/Dockerfile
@@ -36,10 +36,10 @@ RUN \
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
     # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
     \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
diff --git a/lidarr/Dockerfile b/lidarr/Dockerfile
index 361f1baec..d4c1abfd9 100644
--- a/lidarr/Dockerfile
+++ b/lidarr/Dockerfile
@@ -35,10 +35,10 @@ RUN \
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
     # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
     \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
diff --git a/mylar3/Dockerfile b/mylar3/Dockerfile
index 4caa44378..9ccce9901 100644
--- a/mylar3/Dockerfile
+++ b/mylar3/Dockerfile
@@ -35,10 +35,10 @@ RUN \
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
     # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
     \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
diff --git a/nzbget/Dockerfile b/nzbget/Dockerfile
index edd12f4ab..b3964c4da 100644
--- a/nzbget/Dockerfile
+++ b/nzbget/Dockerfile
@@ -39,10 +39,10 @@ RUN \
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
     # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
     \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
diff --git a/ombi/Dockerfile b/ombi/Dockerfile
index 93cff4109..a8fc4ed87 100644
--- a/ombi/Dockerfile
+++ b/ombi/Dockerfile
@@ -35,10 +35,10 @@ RUN \
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
     # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
     \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
diff --git a/organizr/Dockerfile b/organizr/Dockerfile
index fe4437aa8..1bfba3e22 100644
--- a/organizr/Dockerfile
+++ b/organizr/Dockerfile
@@ -34,10 +34,10 @@ RUN \
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
     # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
     \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
diff --git a/overseerr/Dockerfile b/overseerr/Dockerfile
index 375c7c8ea..48dc93ebc 100644
--- a/overseerr/Dockerfile
+++ b/overseerr/Dockerfile
@@ -36,10 +36,10 @@ RUN \
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
     # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
     \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
diff --git a/paperless_ngx/Dockerfile b/paperless_ngx/Dockerfile
index 2b8806aff..16365095c 100644
--- a/paperless_ngx/Dockerfile
+++ b/paperless_ngx/Dockerfile
@@ -35,10 +35,10 @@ RUN \
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
     # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
     \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
diff --git a/papermerge/Dockerfile b/papermerge/Dockerfile
index 359a8f08a..fd91ab2c9 100644
--- a/papermerge/Dockerfile
+++ b/papermerge/Dockerfile
@@ -42,10 +42,10 @@ RUN \
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
     # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
     \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
diff --git a/piwigo/Dockerfile b/piwigo/Dockerfile
index 5a5cc932d..848fd1c17 100644
--- a/piwigo/Dockerfile
+++ b/piwigo/Dockerfile
@@ -35,10 +35,10 @@ RUN \
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
     # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
     \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
diff --git a/plex/Dockerfile b/plex/Dockerfile
index 94b9e8a94..83460619b 100644
--- a/plex/Dockerfile
+++ b/plex/Dockerfile
@@ -44,10 +44,10 @@ RUN \
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
     # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
     \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
diff --git a/plex_meta_manager/Dockerfile b/plex_meta_manager/Dockerfile
index 2c182c17b..1cc46ada6 100644
--- a/plex_meta_manager/Dockerfile
+++ b/plex_meta_manager/Dockerfile
@@ -43,10 +43,10 @@ RUN \
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
     # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
     \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
diff --git a/prowlarr/Dockerfile b/prowlarr/Dockerfile
index 45c720c80..089eef783 100644
--- a/prowlarr/Dockerfile
+++ b/prowlarr/Dockerfile
@@ -35,10 +35,10 @@ RUN \
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
     # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
     \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
diff --git a/qbittorrent/Dockerfile b/qbittorrent/Dockerfile
index 3a19c4014..473f78c76 100644
--- a/qbittorrent/Dockerfile
+++ b/qbittorrent/Dockerfile
@@ -58,10 +58,10 @@ RUN \
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
     # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
     \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
diff --git a/radarr/Dockerfile b/radarr/Dockerfile
index 7ff847d03..c68a1f327 100644
--- a/radarr/Dockerfile
+++ b/radarr/Dockerfile
@@ -35,10 +35,10 @@ RUN \
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
     # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
     \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
diff --git a/readarr/Dockerfile b/readarr/Dockerfile
index 040fcdcbf..855e7361a 100644
--- a/readarr/Dockerfile
+++ b/readarr/Dockerfile
@@ -36,10 +36,10 @@ RUN \
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
     # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
     \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
diff --git a/requestrr/Dockerfile b/requestrr/Dockerfile
index 827e94d64..38ec9923d 100644
--- a/requestrr/Dockerfile
+++ b/requestrr/Dockerfile
@@ -35,10 +35,10 @@ RUN \
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
     # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
     \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
diff --git a/resiliosync/Dockerfile b/resiliosync/Dockerfile
index 18ca687b2..cc89283d3 100644
--- a/resiliosync/Dockerfile
+++ b/resiliosync/Dockerfile
@@ -49,10 +49,10 @@ RUN \
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
     # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
     \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
diff --git a/sonarr/Dockerfile b/sonarr/Dockerfile
index 04a871c6a..84bbdf9b0 100644
--- a/sonarr/Dockerfile
+++ b/sonarr/Dockerfile
@@ -36,10 +36,10 @@ RUN \
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
     # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
     \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
diff --git a/transmission/Dockerfile b/transmission/Dockerfile
index a20e93ef4..fde87ecd5 100644
--- a/transmission/Dockerfile
+++ b/transmission/Dockerfile
@@ -35,10 +35,10 @@ RUN \
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
     # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
     \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
diff --git a/ubooquity/Dockerfile b/ubooquity/Dockerfile
index 491262785..6b4004a02 100644
--- a/ubooquity/Dockerfile
+++ b/ubooquity/Dockerfile
@@ -45,10 +45,10 @@ RUN \
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
     # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
     \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
diff --git a/unpackerr/Dockerfile b/unpackerr/Dockerfile
index 7dacbc187..2d35d1525 100644
--- a/unpackerr/Dockerfile
+++ b/unpackerr/Dockerfile
@@ -26,7 +26,7 @@ FROM ${BUILD_FROM}
 ENV S6_CMD_WAIT_FOR_SERVICES=1 \
     S6_CMD_WAIT_FOR_SERVICES_MAXTIME=0 \
     S6_SERVICES_GRACETIME=0
-    
+
 # Global LSIO modifications
 ARG CONFIGLOCATION="/config"
 # hadolint ignore=SC2015, SC2013
@@ -35,10 +35,10 @@ RUN \
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
     # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
     \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
diff --git a/webtop_kde/Dockerfile b/webtop_kde/Dockerfile
index 51a034cf1..d547b68a3 100644
--- a/webtop_kde/Dockerfile
+++ b/webtop_kde/Dockerfile
@@ -48,10 +48,10 @@ RUN \
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
     # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
     \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \