Merge remote-tracking branch 'origin/master' into create-pull-request/patch-1788655917

# Conflicts:
#	.claude/skills/hassio-addon-workflow/scripts/pr_review.sh

Co-authored-by: alexbelgium <44178713+alexbelgium@users.noreply.github.com>

.claude/skills/hassio-addon-workflow/scripts/env_trace.sh

@@ -30,8 +30,14 @@ VAR="${1:?usage: env_trace.sh <VAR> [process-name-or-pid]}"
 TARGET="${2:-}"
 # VAR is interpolated into grep/sed patterns below — restrict it to a valid env var name
 case "$VAR" in
-    [A-Za-z_]*) [ -z "${VAR//[A-Za-z0-9_]/}" ] || { echo "invalid env var name: $VAR" >&2; exit 1; } ;;
-    *) echo "invalid env var name: $VAR" >&2; exit 1 ;;
+    [A-Za-z_]*) [ -z "${VAR//[A-Za-z0-9_]/}" ] || {
+        echo "invalid env var name: $VAR" >&2
+        exit 1
+    } ;;
+    *)
+        echo "invalid env var name: $VAR" >&2
+        exit 1
+        ;;
 esac
 
 echo "== tracing ${VAR} =="
@@ -80,7 +86,8 @@ echo "3. s6 container_environment (only read by services using #!/usr/bin/with-c
 seen3=0
 for d in /var/run/s6/container_environment /run/s6/container_environment; do
     if [ -f "$d/$VAR" ]; then
-        echo "   $d/$VAR = [$(cat "$d/$VAR")]"; seen3=1
+        echo "   $d/$VAR = [$(cat "$d/$VAR")]"
+        seen3=1
     fi
 done
 [ "$seen3" -eq 0 ] && echo "   not present in either envdir"
@@ -122,8 +129,8 @@ else
                 done
             fi
             # What it was actually launched with beats any theory about its environment.
-            tr '\0' '\n' < "/proc/$pid/cmdline" 2> /dev/null | tail -n +2 |
-                grep -iE "res|screen|${VAR}" | head -3 | sed 's/^/     argv: /'
+            tr '\0' '\n' < "/proc/$pid/cmdline" 2> /dev/null | tail -n +2 \
+                | grep -iE "res|screen|${VAR}" | head -3 | sed 's/^/     argv: /'
         done
     fi
 fi

.claude/skills/hassio-addon-workflow/scripts/preflight.sh

@@ -47,7 +47,10 @@ if [ -n "${BUILD_VERSION:-}" ]; then
     if [ -z "$SLUG" ] && [ -n "${HOSTNAME:-}" ]; then
         base=$(printf '%s' "$HOSTNAME" | sed 's/^[0-9a-f]\{8\}-//')
         for cand in "$(printf '%s' "$base" | tr '-' '_')" "$base"; do
-            [ -f "$REPO/$cand/config.yaml" ] && { SLUG="$cand"; break; }
+            [ -f "$REPO/$cand/config.yaml" ] && {
+                SLUG="$cand"
+                break
+            }
         done
         [ -z "$SLUG" ] && SLUG="$base"
     fi
@@ -69,8 +72,8 @@ if [ -n "${BUILD_VERSION:-}" ]; then
         else
             echo "  MISMATCH — this branch is NOT what is running."
             git fetch origin master --quiet 2> /dev/null
-            master=$(git show origin/master:"$SLUG/config.yaml" 2> /dev/null |
-                grep -E '^version:' | head -1 | tr -d "\"'" | awk '{print $2}')
+            master=$(git show origin/master:"$SLUG/config.yaml" 2> /dev/null \
+                | grep -E '^version:' | head -1 | tr -d "\"'" | awk '{print $2}')
             echo "  origin/master version = ${master:-unknown}"
             echo "  -> work from origin/master; analysing this branch will mislead you."
             echo

.claude/skills/hassio-addon-workflow/scripts/validate.sh

@@ -13,22 +13,31 @@ set -uo pipefail
 if root=$(git rev-parse --show-toplevel 2> /dev/null); then cd "$root" || exit 1; fi
 
 ADDON="${1:-}"
-[ "${ADDON:-}" = "--vs-master" ] && { ADDON=""; set -- --vs-master; }
+[ "${ADDON:-}" = "--vs-master" ] && {
+    ADDON=""
+    set -- --vs-master
+}
 VS_MASTER=false
 for a in "$@"; do [ "$a" = "--vs-master" ] && VS_MASTER=true; done
 
 if [ -z "$ADDON" ]; then
-    mapfile -t _dirs < <(git diff --name-only origin/master...HEAD 2> /dev/null |
-        cut -d/ -f1 | sort -u | grep -vE '^\.' )
+    mapfile -t _dirs < <(git diff --name-only origin/master...HEAD 2> /dev/null \
+        | cut -d/ -f1 | sort -u | grep -vE '^\.')
     if [ "${#_dirs[@]}" -gt 1 ]; then
         echo "several changed dirs: ${_dirs[*]}"
-        echo "pass one explicitly: validate.sh <addon-dir>"; exit 1
+        echo "pass one explicitly: validate.sh <addon-dir>"
+        exit 1
     fi
     ADDON="${_dirs[0]:-}"
 fi
-[ -z "$ADDON" ] && { echo "usage: validate.sh <addon-dir> [--vs-master]"; exit 1; }
+[ -z "$ADDON" ] && {
+    echo "usage: validate.sh <addon-dir> [--vs-master]"
+    exit 1
+}
 git rev-parse --verify origin/master > /dev/null 2>&1 || {
-    echo "origin/master missing — run: git fetch origin master"; exit 1; }
+    echo "origin/master missing — run: git fetch origin master"
+    exit 1
+}
 export PYTHONDONTWRITEBYTECODE=1
 echo "== validating $ADDON =="
 
@@ -36,14 +45,22 @@ fail=0
 note() { printf '  %-13s %s\n' "$1" "$2"; }
 # execline `run`/`finish` files are not shell (25 of them here, across 21 add-ons). Neither
 # linter below can read one, so anything either says about it is noise.
-is_execline() { local l; IFS= read -r l < "$1" 2> /dev/null; [[ $l == '#!'*execlineb* ]]; }
+is_execline() {
+    local l
+    IFS= read -r l < "$1" 2> /dev/null
+    [[ $l == '#!'*execlineb* ]]
+}
 
 # Shell: bash -n then shellcheck -x (follows sourced files, as CI does). One list for both.
 files=()
 while IFS= read -r f; do is_execline "$f" || files+=("$f"); done \
     < <(find "$ADDON" -type f \( -name '*.sh' -o -name 'run' -o -name 'finish' -o -name 'autostart' \) 2> /dev/null)
 for f in "${files[@]}"; do
-    if ! out=$(bash -n "$f" 2>&1); then note "bash -n" "FAIL $f"; echo "$out" | sed 's/^/      /'; fail=1; fi
+    if ! out=$(bash -n "$f" 2>&1); then
+        note "bash -n" "FAIL $f"
+        echo "$out" | sed 's/^/      /'
+        fail=1
+    fi
 done
 [ "$fail" -eq 0 ] && note "bash -n" "${#files[@]} file(s) checked"
 
@@ -65,13 +82,16 @@ command -v hadolint > /dev/null 2>&1 && [ -f "$ADDON/Dockerfile" ] && {
 
 if [ -f "$ADDON/config.yaml" ]; then
     # path passed as argv, never interpolated into Python source
-    python3 - "$ADDON/config.yaml" <<'PY' || { note "config.yaml" "FAIL parse"; fail=1; }
+    python3 - "$ADDON/config.yaml" << 'PY' || {
 import yaml,sys
 d=yaml.safe_load(open(sys.argv[1]))
 print('  %-13s ok (version=%s, %d options)' % ('config.yaml', d.get('version'), len(d.get('options') or {})))
 missing=[k for k in (d.get('options') or {}) if k not in (d.get('schema') or {})]
 if missing: print('  %-13s options with no schema entry: %s' % ('WARN', missing)); sys.exit(0)
 PY
+        note "config.yaml" "FAIL parse"
+        fail=1
+    }
     command -v yamllint > /dev/null 2>&1 && {
         yl=$(yamllint -f parsable "$ADDON/config.yaml" 2>&1 | grep -c .)
         note "yamllint" "$yl finding(s) (compare with --vs-master)"
@@ -79,7 +99,10 @@ PY
 fi
 
 while IFS= read -r f; do
-    python3 -m py_compile "$f" 2> /dev/null || { note "py_compile" "FAIL $f"; fail=1; }
+    python3 -m py_compile "$f" 2> /dev/null || {
+        note "py_compile" "FAIL $f"
+        fail=1
+    }
 done < <(find "$ADDON" -type f -name '*.py' 2> /dev/null)
 
 $VS_MASTER && command -v npx > /dev/null 2>&1 && [ -f "$ADDON/CHANGELOG.md" ] && {
@@ -96,7 +119,8 @@ if git diff --name-only origin/master...HEAD 2> /dev/null | grep -Fxq "$ADDON/CH
     note "CHANGELOG" "updated"
 else
     # This one IS gated: onpr_check-pr.yaml exits 1 without it.
-    note "CHANGELOG" "NOT UPDATED for $ADDON — CI hard-gates this"; fail=1
+    note "CHANGELOG" "NOT UPDATED for $ADDON — CI hard-gates this"
+    fail=1
 fi
 if git diff origin/master...HEAD -- "$ADDON/config.yaml" 2> /dev/null | grep -q '^+version:'; then
     note "version" "bumped"
@@ -110,7 +134,8 @@ note "docker build" "NOT tested locally (dockerd unavailable) — CI is the only
 if $VS_MASTER; then
     echo
     echo "== findings ADDED by this diff (pre-existing ones filtered out) =="
-    tmp=$(mktemp -d); trap 'rm -rf "$tmp"' EXIT
+    tmp=$(mktemp -d)
+    trap 'rm -rf "$tmp"' EXIT
     added=0
     # Fed by process substitution, not a pipe: a pipeline runs this in a subshell, where the
     # findings below could never reach $fail and the verdict would contradict the list.
@@ -125,14 +150,26 @@ if $VS_MASTER; then
         # cancel it out and report a false clean.
         case "$f" in
             *.sh | *autostart | */run | */finish)
-                command -v shellcheck > /dev/null 2>&1 || { echo "  $f: SKIPPED (shellcheck not installed)"; continue; }
-                cmd() { shellcheck -x -f gcc "$1" 2>&1 | sed 's/^[^:]*:[0-9]*:[0-9]*://'; } ;;
+                command -v shellcheck > /dev/null 2>&1 || {
+                    echo "  $f: SKIPPED (shellcheck not installed)"
+                    continue
+                }
+                cmd() { shellcheck -x -f gcc "$1" 2>&1 | sed 's/^[^:]*:[0-9]*:[0-9]*://'; }
+                ;;
             *.yaml | *.yml)
-                command -v yamllint > /dev/null 2>&1 || { echo "  $f: SKIPPED (yamllint not installed)"; continue; }
-                cmd() { yamllint -f parsable "$1" 2>&1 | sed 's/^[^:]*//; s/^:[0-9]*:[0-9]*//'; } ;;
+                command -v yamllint > /dev/null 2>&1 || {
+                    echo "  $f: SKIPPED (yamllint not installed)"
+                    continue
+                }
+                cmd() { yamllint -f parsable "$1" 2>&1 | sed 's/^[^:]*//; s/^:[0-9]*:[0-9]*//'; }
+                ;;
             *Dockerfile)
-                command -v hadolint > /dev/null 2>&1 || { echo "  $f: SKIPPED (hadolint not installed)"; continue; }
-                cmd() { hadolint "$1" 2>&1 | sed 's/^[^:]*//; s/^:[0-9]*//'; } ;;
+                command -v hadolint > /dev/null 2>&1 || {
+                    echo "  $f: SKIPPED (hadolint not installed)"
+                    continue
+                }
+                cmd() { hadolint "$1" 2>&1 | sed 's/^[^:]*//; s/^:[0-9]*//'; }
+                ;;
             *) continue ;;
         esac
         b=$(cmd "$tmp/base" | sort)
@@ -141,7 +178,8 @@ if $VS_MASTER; then
         [ -n "$new" ] && {
             echo "  $f: $(printf '%s\n' "$new" | grep -c .) NEW finding(s)"
             printf '%s\n' "$new" | sed 's/^/      /' | head -5
-            added=1; fail=1
+            added=1
+            fail=1
         }
     done < <(git diff --name-only origin/master...HEAD -- "$ADDON" 2> /dev/null)
     [ "$added" -eq 0 ] && echo "  (none — this diff introduced no new lint findings)"

.github/scripts/ai_triage_context.sh

@@ -28,7 +28,10 @@ if [ -n "$RAW" ]; then
     # Directory list without checking out any of them.
     git ls-tree -d --name-only HEAD > "$OUT/dirs.txt"
     for guess in "$CAND" "${CAND//_/-}" "${CAND//_/.}"; do
-    if grep -qxF "$guess" "$OUT/dirs.txt"; then ADDON="$guess"; break; fi
+        if grep -qxF "$guess" "$OUT/dirs.txt"; then
+            ADDON="$guess"
+            break
+        fi
     done
     # Separator-insensitive exact match: a title like "[Calibre-web]" (hyphen)
     # against a directory named calibre_web (underscore) matches neither exact
@@ -38,7 +41,10 @@ if [ -n "$RAW" ]; then
     if [ -z "$ADDON" ]; then
         CAND_STRIPPED=$(tr -d '_.-' <<< "$CAND")
         while IFS= read -r dir; do
-      if [ "$(tr -d '_.-' <<<"$dir")" = "$CAND_STRIPPED" ]; then ADDON="$dir"; break; fi
+            if [ "$(tr -d '_.-' <<< "$dir")" = "$CAND_STRIPPED" ]; then
+                ADDON="$dir"
+                break
+            fi
         done < "$OUT/dirs.txt"
     fi
     # Last resort: longest directory name contained in the candidate.

.templates/00-banner.sh

@@ -19,8 +19,8 @@ if ! bashio::supervisor.ping 2>/dev/null; then
     if [ ! -f /usr/bin/bashio ]; then
         cp -rf /usr/local/lib/bashio-standalone.sh /usr/bin/bashio
     fi
-    grep -rl "^#!.*bashio" /etc |
-    while IFS= read -r f; do
+    grep -rl "^#!.*bashio" /etc \
+        | while IFS= read -r f; do
             grep -qF "source /usr/local/lib/bashio-standalone.sh" "$f" && continue
             sed -i '1a source /usr/local/lib/bashio-standalone.sh' "$f"
         done

.templates/00-global_var.sh

@@ -152,8 +152,8 @@ if [[ "${1:-}" == "--self-test" ]]; then
         done
     fi
 
-    [[ "$self_test_rc" -eq 0 ]] &&
-        echo "${#self_test_values[@]} values round-tripped unchanged (export block + dotenv)"
+    [[ "$self_test_rc" -eq 0 ]] \
+        && echo "${#self_test_values[@]} values round-tripped unchanged (export block + dotenv)"
     exit "$self_test_rc"
 fi
 
@@ -193,7 +193,10 @@ SECRETSOURCE=""
 
 resolve_secret() {
     local v="$1" name line
-    [[ "$v" =~ ^[[:space:]]*\!secret[[:space:]]+(.+)$ ]] || { printf '%s' "$v"; return; }
+    [[ "$v" =~ ^[[:space:]]*\!secret[[:space:]]+(.+)$ ]] || {
+        printf '%s' "$v"
+        return
+    }
     name="${BASH_REMATCH[1]}"
     [[ -n "$SECRETSOURCE" ]] || bashio::exit.nok "Secrets not mounted"
 

.templates/01-custom_script.sh

@@ -11,8 +11,14 @@ pick_exec_dir() {
     for d in /dev/shm /run /var/run /mnt /root /; do
         if [ -d "$d" ] && [ -w "$d" ]; then
             local t="${d%/}/.exec_test_$$"
-      printf '#!/bin/sh\necho ok\n' >"$t" 2>/dev/null || { rm -f "$t" 2>/dev/null || true; continue; }
-      chmod 700 "$t" 2>/dev/null || { rm -f "$t" 2>/dev/null || true; continue; }
+            printf '#!/bin/sh\necho ok\n' > "$t" 2> /dev/null || {
+                rm -f "$t" 2> /dev/null || true
+                continue
+            }
+            chmod 700 "$t" 2> /dev/null || {
+                rm -f "$t" 2> /dev/null || true
+                continue
+            }
             if "$t" > /dev/null 2>&1; then
                 rm -f "$t" 2> /dev/null || true
                 echo "$d"

.templates/bashio-standalone.sh

@@ -46,7 +46,8 @@ _bashio_color() {
 }
 
 _bashio_log() {
-  local c="${1:-}"; shift || true
+    local c="${1:-}"
+    shift || true
     printf '%s%s%s\n' "$(_bashio_color "$c")" "$*" "$(_bashio_color reset)"
 }
 
@@ -246,7 +247,10 @@ bashio::info.supervisor()  { printf '%s' "standalone"; }
 # -----------------------------------------------------------------------------
 bashio::config() {
     local key="${1:-}"
-  [ -n "$key" ] || { printf '%s' ""; return 0; }
+    [ -n "$key" ] || {
+        printf '%s' ""
+        return 0
+    }
 
     local v=""
     if _bashio_env_get "$key" > /dev/null 2>&1; then
@@ -356,7 +360,10 @@ bashio::host.hostname() {
 #   bashio::services.available "mqtt"
 bashio::services() {
     local svc="${1:-}" key="${2:-}"
-  [ -n "$svc" ] && [ -n "$key" ] || { printf '%s' ""; return 0; }
+    [ -n "$svc" ] && [ -n "$key" ] || {
+        printf '%s' ""
+        return 0
+    }
 
     local upper svc_upper var v=""
     upper="$(printf '%s' "$key" | tr '[:lower:]' '[:upper:]')"
@@ -419,7 +426,11 @@ bashio::homeassistant.token() {
 # Exit helpers
 # -----------------------------------------------------------------------------
 bashio::exit.ok() { exit 0; }
-bashio::exit.nok() { local m="${1:-}"; [ -n "$m" ] && bashio::log.red "$m"; exit 1; }
+bashio::exit.nok() {
+    local m="${1:-}"
+    [ -n "$m" ] && bashio::log.red "$m"
+    exit 1
+}
 
 # -----------------------------------------------------------------------------
 # Core config check shim

.templates/ha_entrypoint.sh

@@ -28,8 +28,14 @@ pick_exec_dir() {
         if [ -d "$d" ] && [ -w "$d" ]; then
             # Create a tiny test executable to confirm "exec" works
             local t="${d%/}/.exec_test_$$"
-      printf '#!/bin/sh\necho ok\n' >"$t" 2>/dev/null || { rm -f "$t" 2>/dev/null || true; continue; }
-      chmod 700 "$t" 2>/dev/null || { rm -f "$t" 2>/dev/null || true; continue; }
+            printf '#!/bin/sh\necho ok\n' > "$t" 2> /dev/null || {
+                rm -f "$t" 2> /dev/null || true
+                continue
+            }
+            chmod 700 "$t" 2> /dev/null || {
+                rm -f "$t" 2> /dev/null || true
+                continue
+            }
             if "$t" > /dev/null 2>&1; then
                 rm -f "$t" 2> /dev/null || true
                 echo "$d"
@@ -209,8 +215,8 @@ if $PID1 && { [ -x /command/with-contenv ] || [ -x /usr/bin/with-contenv ]; }; t
     # accepts a surviving symlink-to-directory and would let the dump follow it. rm does not traverse
     # a symlink, but it would empty anything bind-mounted at this exact path -- not a configuration
     # any add-on uses, and not one s6 would tolerate either.
-  if rm -rf "$S6_CONTAINER_ENV" "$S6_CONTAINER_ENV.tmp" && mkdir -p "$S6_CONTAINER_ENV.tmp" &&
-    s6-dumpenv -- "$S6_CONTAINER_ENV.tmp" && mv "$S6_CONTAINER_ENV.tmp" "$S6_CONTAINER_ENV"; then
+    if rm -rf "$S6_CONTAINER_ENV" "$S6_CONTAINER_ENV.tmp" && mkdir -p "$S6_CONTAINER_ENV.tmp" \
+        && s6-dumpenv -- "$S6_CONTAINER_ENV.tmp" && mv "$S6_CONTAINER_ENV.tmp" "$S6_CONTAINER_ENV"; then
         echo "Populated $S6_CONTAINER_ENV for with-contenv"
     else
         # Leaves the directory absent, which is exactly how this fails today -- so the failure mode is

addons_updater/README.md

@@ -75,7 +75,7 @@ You can add the following tags in the file :
 
 ### Addon version numbering
 
-The `version` written in the addon `config.yaml` is the one Home Assistant compares to decide whether an update is available. Home Assistant hides the update when it can order both versions and the new one is not strictly newer (`1.2.3` -> `1.2.3-2` is a semver pre-release, so it is *older*), and it cannot order tags such as `version-bf9e0b4f` or `ubuntu-2026-06-01` at all.
+The `version` written in the addon `config.yaml` is the one Home Assistant compares to decide whether an update is available. Home Assistant hides the update when it can order both versions and the new one is not strictly newer (`1.2.3` -> `1.2.3-2` is a semver pre-release, so it is _older_), and it cannot order tags such as `version-bf9e0b4f` or `ubuntu-2026-06-01` at all.
 
 The addon version is therefore derived from the upstream tag:
 

birdnet-pi-zach/DOCS.md

@@ -9,9 +9,9 @@ Here are some example tests I did (the whole threads are really interesting also
 
 **My recommendation:**
 
-- **Best entry system (< 50 €):** Boya By-lm40 (30 €) + deadcat (10 €)
-- **Best middle end system (< 150 €):** Clippy EM272 TRS/TRRS (55 €) + Rode AI micro trs/trrs to usb (70 €) + Rycote deadcat (27 €)
-- **Best high end system (<400 €):** Clippy EM272 XLR (85 €) or LOM Ucho Pro (75 €) + Focusrite Scarlet 2i2 4th Gen (200 €) + Bubblebee Pro Extreme deadcat (45 €)
+- **Best entry system (< 50 €):** Boya By-lm40 (30 €) + deadcat (10 €)
+- **Best middle end system (< 150 €):** Clippy EM272 TRS/TRRS (55 €) + Rode AI micro trs/trrs to usb (70 €) + Rycote deadcat (27 €)
+- **Best high end system (<400 €):** Clippy EM272 XLR (85 €) or LOM Ucho Pro (75 €) + Focusrite Scarlet 2i2 4th Gen (200 €) + Bubblebee Pro Extreme deadcat (45 €)
 
 **Sources for high end microphones in Europe:**
 

birdnet-pi-zach/rootfs/helpers/birdnet_to_mqtt.py

@@ -112,6 +112,7 @@ def automatic_mqtt_publish(file, detection, path):
         mqttc.publish(mqtt_topic, json_bird, 1)
         log.info("Posted to MQTT: ok")
 
+
 # Create MQTT client using legacy callback API when available for
 # compatibility with paho-mqtt >= 2.0
 callback_api = getattr(mqtt, "CallbackAPIVersion", None)

birdnet-pi/DOCS.md

@@ -9,9 +9,9 @@ Here are some example tests I did (the whole threads are really interesting also
 
 **My recommendation:**
 
-- **Best entry system (< 50 €):** Boya By-lm40 (30 €) + deadcat (10 €)
-- **Best middle end system (< 150 €):** Clippy EM272 TRS/TRRS (55 €) + Rode AI micro trs/trrs to usb (70 €) + Rycote deadcat (27 €)
-- **Best high end system (<400 €):** Clippy EM272 XLR (85 €) or LOM Ucho Pro (75 €) + Focusrite Scarlet 2i2 4th Gen (200 €) + Bubblebee Pro Extreme deadcat (45 €)
+- **Best entry system (< 50 €):** Boya By-lm40 (30 €) + deadcat (10 €)
+- **Best middle end system (< 150 €):** Clippy EM272 TRS/TRRS (55 €) + Rode AI micro trs/trrs to usb (70 €) + Rycote deadcat (27 €)
+- **Best high end system (<400 €):** Clippy EM272 XLR (85 €) or LOM Ucho Pro (75 €) + Focusrite Scarlet 2i2 4th Gen (200 €) + Bubblebee Pro Extreme deadcat (45 €)
 
 **Sources for high end microphones in Europe:**
 

birdnet-pi/rootfs/helpers/birdnet_to_mqtt.py

@@ -112,6 +112,7 @@ def automatic_mqtt_publish(file, detection, path):
         mqttc.publish(mqtt_topic, json_bird, 1)
         log.info("Posted to MQTT: ok")
 
+
 # Create MQTT client using legacy callback API when available for
 # compatibility with paho-mqtt >= 2.0
 callback_api = getattr(mqtt, "CallbackAPIVersion", None)

birdnet-pipy/config.yaml

@@ -73,7 +73,7 @@ map:
 name: BirdNET-PiPy
 options:
   env_vars: []
-  ICECAST_PASSWORD: ''
+  ICECAST_PASSWORD: ""
   data_location: /config/data
 panel_icon: mdi:bird
 ports:

browser_chromium/rootfs/etc/cont-init.d/20-folders.sh

@@ -7,7 +7,6 @@ set -e
 PUID=$(bashio::config "PUID")
 PGID=$(bashio::config "PGID")
 
-
 # Create cache
 #mkdir -p /.cache
 #chmod 755 /.cache

calibre_web/README.md

@@ -99,7 +99,7 @@ This addon supports mounting both local drives and remote SMB shares:
 
 ### Optional Calibre-Web features
 
-Calibre-Web documents optional extras that a manual installation adds with `pip install calibreweb[metadata]` and similar. **You do not need to install anything here**: the LinuxServer base image this add-on builds on installs Calibre-Web's `requirements.txt` *and* its full `optional-requirements.txt` into the application's virtualenv, so the gdrive, gmail, goodreads, ldap, oauth, metadata, comics and kobo dependencies are all present already. Running `pip install calibreweb[...]` inside the container is not a supported way to enable them: it installs the PyPI distribution of Calibre-Web over an installation that already has those dependencies, and it can disturb the versions the base image pinned. It is also thrown away, because the Supervisor recreates the add-on container on restart.
+Calibre-Web documents optional extras that a manual installation adds with `pip install calibreweb[metadata]` and similar. **You do not need to install anything here**: the LinuxServer base image this add-on builds on installs Calibre-Web's `requirements.txt` _and_ its full `optional-requirements.txt` into the application's virtualenv, so the gdrive, gmail, goodreads, ldap, oauth, metadata, comics and kobo dependencies are all present already. Running `pip install calibreweb[...]` inside the container is not a supported way to enable them: it installs the PyPI distribution of Calibre-Web over an installation that already has those dependencies, and it can disturb the versions the base image pinned. It is also thrown away, because the Supervisor recreates the add-on container on restart.
 
 Optional features are switched on in the Calibre-Web web interface, not in the add-on options, under `Admin` -> `Basic Configuration` -> `Feature Configuration` (for example `Enable Uploads`, `Enable Kobo sync`, `Use Goodreads`).
 

calibre_web/rootfs/etc/cont-init.d/80-configuration.sh

@@ -30,16 +30,16 @@ else
     # duplicates it can leave behind are entries calibre-web skips or already trusts.
     # The column only exists once calibre-web 0.6.27+ has migrated app.db and cont-init runs
     # before calibre-web, so a failure here is not fatal : the next start applies it.
-    trusted_ips_error=$(sqlite3 /config/app.db "update settings set config_reverse_proxy_trusted_ips='127.0.0.1,::1,::ffff:127.0.0.1,172.30.32.0/23,::ffff:172.30.32.0/119,'||coalesce(config_reverse_proxy_trusted_ips,'') where coalesce(config_reverse_proxy_trusted_ips,'') not like '%::ffff:172.30.32.0/119%'" 2>&1) ||
-        bashio::log.warning "Could not set the ingress trusted ip list, it will be applied at next start (${trusted_ips_error})"
+    trusted_ips_error=$(sqlite3 /config/app.db "update settings set config_reverse_proxy_trusted_ips='127.0.0.1,::1,::ffff:127.0.0.1,172.30.32.0/23,::ffff:172.30.32.0/119,'||coalesce(config_reverse_proxy_trusted_ips,'') where coalesce(config_reverse_proxy_trusted_ips,'') not like '%::ffff:172.30.32.0/119%'" 2>&1) \
+        || bashio::log.warning "Could not set the ingress trusted ip list, it will be applied at next start (${trusted_ips_error})"
 
     # Calibre-web autodetects kepubify only while this setting is still NULL. On every install
     # that predates the Dockerfile fix above, that detection already ran, found nothing usable and
     # stored an empty string, so it is never retried. Put an empty value back to NULL and
     # calibre-web detects /opt/kepubify itself when it starts, a few seconds after this runs.
     # A path the user set by hand is not empty and is left alone.
-    kepubify_error=$(sqlite3 /config/app.db "update settings set config_kepubifypath = NULL where config_kepubifypath = ''" 2>&1) ||
-        bashio::log.warning "Could not reset the kepubify path, it will be applied at next start (${kepubify_error})"
+    kepubify_error=$(sqlite3 /config/app.db "update settings set config_kepubifypath = NULL where config_kepubifypath = ''" 2>&1) \
+        || bashio::log.warning "Could not reset the kepubify path, it will be applied at next start (${kepubify_error})"
 fi
 
 bashio::log.info "Default username:password is admin:admin123"

claude_desktop/rootfs/etc/cont-init.d/81-codex_cli.sh

@@ -338,8 +338,7 @@ ln -sfn "$CODEX_BIN" "$CODEX_LINK"
 CODEX_SANDBOX_MODE="$(bashio::config 'codex_sandbox_mode' 'danger-full-access')"
 run_as_runtime_user mkdir -p "$RUNTIME_HOME/.codex"
 CODEX_SANDBOX_MODE="$CODEX_SANDBOX_MODE" RUNTIME_HOME="$RUNTIME_HOME" \
-    run_as_runtime_user python3 - <<'PY' \
-    || bashio::log.warning "Unable to update the managed Codex configuration block"
+    run_as_runtime_user python3 - << 'PY' || bashio::log.warning "Unable to update the managed Codex configuration block"
 import os
 import re
 import tomllib

claude_desktop/rootfs/usr/local/bin/ha-cli

@@ -133,7 +133,9 @@ def rest(method, base, token, path, body=None):
     if body is not None:
         data = json.dumps(body).encode("utf-8")
         headers["Content-Type"] = "application/json"
-    req = urllib.request.Request(_url(base, path), data=data, method=method, headers=headers)
+    req = urllib.request.Request(
+        _url(base, path), data=data, method=method, headers=headers
+    )
     try:
         with urllib.request.urlopen(req, timeout=30) as resp:
             text = resp.read().decode("utf-8")
@@ -141,7 +143,9 @@ def rest(method, base, token, path, body=None):
         detail = exc.read().decode("utf-8", "replace").strip()
         sys.exit(f"ha-cli: HTTP {exc.code} {exc.reason} on {method} {path}\n{detail}")
     except urllib.error.URLError as exc:
-        sys.exit(f"ha-cli: cannot reach Home Assistant ({exc.reason}) on {method} {path}")
+        sys.exit(
+            f"ha-cli: cannot reach Home Assistant ({exc.reason}) on {method} {path}"
+        )
     try:
         return json.loads(text) if text.strip() else None
     except ValueError:
@@ -214,7 +218,9 @@ def main(argv):
             sys.exit("usage: ha-cli call <domain.service> [BODY]")
         domain, service = args[0].split(".", 1)
         body = _read_body(args[1]) if len(args) > 1 else None
-        _print(rest("POST", rest_base, token, f"services/{domain}/{service}", body or {}))
+        _print(
+            rest("POST", rest_base, token, f"services/{domain}/{service}", body or {})
+        )
     elif cmd == "states":
         path = f"states/{args[0]}" if args else "states"
         _print(rest("GET", rest_base, token, path))

claude_desktop/rootfs/usr/local/bin/headroom-posttooluse-compress.py

@@ -76,7 +76,11 @@ def main() -> int:
 
     # Find big string/array fields before paying the headroom import cost.
     def is_string_array(value):
-        return isinstance(value, list) and len(value) > ARRAY_KEEP and all(isinstance(v, str) for v in value)
+        return (
+            isinstance(value, list)
+            and len(value) > ARRAY_KEEP
+            and all(isinstance(v, str) for v in value)
+        )
 
     if isinstance(response, str):
         string_candidates = ["__whole__"] if len(response) >= MIN_CHARS else []
@@ -85,10 +89,14 @@ def main() -> int:
         string_candidates = [
             key
             for key, value in response.items()
-            if key not in SKIP_KEYS and isinstance(value, str) and len(value) >= MIN_CHARS
+            if key not in SKIP_KEYS
+            and isinstance(value, str)
+            and len(value) >= MIN_CHARS
         ]
         array_candidates = [
-            key for key, value in response.items() if key not in SKIP_KEYS and is_string_array(value)
+            key
+            for key, value in response.items()
+            if key not in SKIP_KEYS and is_string_array(value)
         ]
     else:
         string_candidates = []

cleanuparr/config.yaml

@@ -1,8 +1,7 @@
 arch:
   - aarch64
   - amd64
-description:
-  Automatically removes stuck and unwanted downloads from your *arr and download clients
+description: Automatically removes stuck and unwanted downloads from your *arr and download clients
 devices:
   - /dev/dri
   - /dev/dri/card0

fireflyiii_data_importer/rootfs/templates/cronupdate

@@ -4,9 +4,17 @@ set -e
 
 # Source environment variables for cron context
 # shellcheck disable=SC1091
-if [ -f /etc/environment ]; then set -a; . /etc/environment; set +a; fi
+if [ -f /etc/environment ]; then
+	set -a
+	. /etc/environment
+	set +a
+fi
 # shellcheck disable=SC1091
-if [ -f /.env ]; then set -a; . /.env; set +a; fi
+if [ -f /.env ]; then
+	set -a
+	. /.env
+	set +a
+fi
 
 # Use persisted value instead of calling bashio::config (www-data may lack API access)
 CONFIGSOURCE="${CONFIG_LOCATION}"

free_games_claimer/rootfs/templates/config.env

@@ -2,14 +2,14 @@
 # Complete option reference:
 # https://github.com/P-Adamiec/Free-Games-Claimer-Remaster#configuration
 
+HEIGHT=720
+LOGIN_TIMEOUT=180
+NOVNC_PORT=6080
 # Browser and noVNC
 SHOW=1
-WIDTH=1280
-HEIGHT=720
 TIMEOUT=60
-LOGIN_TIMEOUT=180
 VNC_LOGIN_TIMEOUT=180
-NOVNC_PORT=6080
+WIDTH=1280
 # Public address used in notification links when behind a reverse proxy.
 # VNC_URL=https://fgc.example.tld
 

free_games_claimer/rootfs/usr/local/bin/migrate_vogler_data.py

@@ -47,8 +47,10 @@ def normalize_timestamp(value: Any) -> str:
             return parsed.isoformat(sep=" ", timespec="seconds")
         except ValueError:
             pass
-    return datetime.now(timezone.utc).replace(tzinfo=None).isoformat(
-        sep=" ", timespec="seconds"
+    return (
+        datetime.now(timezone.utc)
+        .replace(tzinfo=None)
+        .isoformat(sep=" ", timespec="seconds")
     )
 
 
@@ -99,8 +101,7 @@ def iter_records(store: str, payload: Any, source: Path) -> Iterator[dict[str, A
 
 
 def ensure_schema(connection: sqlite3.Connection) -> None:
-    connection.executescript(
-        """
+    connection.executescript("""
         CREATE TABLE IF NOT EXISTS claimed_games (
             id INTEGER NOT NULL PRIMARY KEY AUTOINCREMENT,
             store VARCHAR(32) NOT NULL,
@@ -117,8 +118,7 @@ def ensure_schema(connection: sqlite3.Connection) -> None:
         CREATE INDEX IF NOT EXISTS ix_claimed_games_store ON claimed_games (store);
         CREATE INDEX IF NOT EXISTS ix_claimed_games_user ON claimed_games (user);
         CREATE INDEX IF NOT EXISTS ix_claimed_games_game_id ON claimed_games (game_id);
-        """
-    )
+        """)
 
 
 def migrate() -> int:
@@ -209,7 +209,12 @@ def migrate() -> int:
 
                     connection.commit()
                     log(f"Imported {source_imported} record(s) from {source}")
-                except (OSError, ValueError, json.JSONDecodeError, sqlite3.Error) as err:
+                except (
+                    OSError,
+                    ValueError,
+                    json.JSONDecodeError,
+                    sqlite3.Error,
+                ) as err:
                     connection.rollback()
                     message = f"Failed to import {source}: {err}"
                     errors.append(message)

immich_cuda/config.yaml

@@ -2,8 +2,7 @@ arch:
   - amd64
 backup_exclude:
   - "**/machine-learning/*"
-description:
-  Self-hosted photo and video backup solution directly from your mobile phone
+description: Self-hosted photo and video backup solution directly from your mobile phone
 devices:
   - /dev/dri
   - /dev/dxg

immich_frame/rootfs/etc/cont-init.d/99-run.sh

@@ -121,7 +121,10 @@ ACCOUNT_SCHEMA_OPTS="Albums ExcludedAlbums People Tags ShowFavorites ShowMemorie
 
     for opt in $GENERAL_SCHEMA_OPTS; do
         if config_has ".$opt"; then
-            $GENERAL_STARTED || { echo "General:"; GENERAL_STARTED=true; }
+            $GENERAL_STARTED || {
+                echo "General:"
+                GENERAL_STARTED=true
+            }
             yaml_kv "  " "$opt" "$(config_val ".$opt")"
         fi
     done
@@ -129,7 +132,10 @@ ACCOUNT_SCHEMA_OPTS="Albums ExcludedAlbums People Tags ShowFavorites ShowMemorie
     # Add general env_vars (skip if already set via schema option)
     for key in "${!GENERAL_ENVS[@]}"; do
         if ! config_has ".$key"; then
-            $GENERAL_STARTED || { echo "General:"; GENERAL_STARTED=true; }
+            $GENERAL_STARTED || {
+                echo "General:"
+                GENERAL_STARTED=true
+            }
             yaml_kv "  " "$key" "${GENERAL_ENVS[$key]}"
         fi
     done

immich_noml/config.yaml

@@ -3,8 +3,7 @@ arch:
   - amd64
 backup_exclude:
   - "**/machine-learning/*"
-description:
-  Self-hosted photo and video backup solution directly from your mobile phone
+description: Self-hosted photo and video backup solution directly from your mobile phone
 devices:
   - /dev/dri
   - /dev/dxg

jellyfin/config.yaml

@@ -71,7 +71,7 @@ devices:
   - /dev/nvme1
   - /dev/nvme2
 environment:
-  ATTACHED_DEVICES_PERMS: '/dev/dri /dev/dvb /dev/vchiq /dev/vc-mem /dev/video1? -type c -o -type f'
+  ATTACHED_DEVICES_PERMS: "/dev/dri /dev/dvb /dev/vchiq /dev/vc-mem /dev/video1? -type c -o -type f"
 host_dbus: true
 host_network: true
 image: ghcr.io/alexbelgium/jellyfin-{arch}

joplin/rootfs/etc/cont-init.d/99-run.sh

@@ -60,7 +60,10 @@ unlock_postgres_migrations() {
     local has_table
     has_table="$(psql -h "$POSTGRES_HOST" -p "$pg_port" -U "$POSTGRES_USER" -d "$POSTGRES_DATABASE" -Atqc \
         "SELECT 1 FROM information_schema.tables WHERE table_name='knex_migrations_lock' LIMIT 1;" 2> /dev/null || true)"
-    [[ "$has_table" == "1" ]] || { unset PGPASSWORD; return 0; }
+    [[ "$has_table" == "1" ]] || {
+        unset PGPASSWORD
+        return 0
+    }
 
     # Ensure row exists
     psql -h "$POSTGRES_HOST" -p "$pg_port" -U "$POSTGRES_USER" -d "$POSTGRES_DATABASE" -Atqc \

maintainerr/config.yaml

@@ -1,8 +1,7 @@
 arch:
   - aarch64
   - amd64
-description:
-  Rule-based media cleanup tool for Plex, Jellyfin and Emby. Creates collections and optionally deletes unwatched content.
+description: Rule-based media cleanup tool for Plex, Jellyfin and Emby. Creates collections and optionally deletes unwatched content.
 devices:
   - /dev/dri
   - /dev/dri/card0

manyfold/README.md

@@ -172,7 +172,7 @@ chmod 600 /addon_configs/<new_slug>/secret_key_base
 
 Replace `<old_slug>` and `<new_slug>` with the actual directory names (e.g. `db21ed7f_manyfold` and `088d77ac_manyfold_solo`). List them with `ls /addon_configs/`.
 
-3. Start the new addon — it will pick up the existing database and secret automatically.
+1. Start the new addon — it will pick up the existing database and secret automatically.
 
 ## Notes
 

manyfold/run.sh

@@ -194,8 +194,7 @@ start_manyfold() {
         /usr/local/bin/docker-entrypoint.sh \
         /usr/local/bin/docker-entrypoint \
         /docker-entrypoint.sh \
-    /entrypoint.sh
-  do
+        /entrypoint.sh; do
         if [[ -x "$candidate" ]]; then
             log "Starting Manyfold via ${candidate}"
             if [[ "$candidate" == *docker-entrypoint* ]]; then
@@ -228,20 +227,34 @@ start_manyfold() {
 
 [[ -f "$OPTIONS_JSON" ]] || die "Missing options file at ${OPTIONS_JSON}"
 
-PUID="$(read_opt puid)"; PUID="${PUID:-1000}"
-PGID="$(read_opt pgid)"; PGID="${PGID:-1000}"
-MULTIUSER="$(read_opt multiuser)"; MULTIUSER="${MULTIUSER:-true}"
-LIBRARY_PATH_RAW="$(read_opt library_path)"; LIBRARY_PATH_RAW="${LIBRARY_PATH_RAW:-$DEFAULT_LIBRARY_PATH}"
-THUMBNAILS_PATH_RAW="$(read_opt thumbnails_path)"; THUMBNAILS_PATH_RAW="${THUMBNAILS_PATH_RAW:-$DEFAULT_THUMBNAILS_PATH}"
-LOG_LEVEL="$(read_opt log_level)"; LOG_LEVEL="${LOG_LEVEL:-$DEFAULT_LOG_LEVEL}"
-WEB_CONCURRENCY="$(read_opt web_concurrency)"; WEB_CONCURRENCY="${WEB_CONCURRENCY:-$DEFAULT_WEB_CONCURRENCY}"
-RAILS_MAX_THREADS="$(read_opt rails_max_threads)"; RAILS_MAX_THREADS="${RAILS_MAX_THREADS:-$DEFAULT_RAILS_MAX_THREADS}"
-DEFAULT_WORKER_CONCURRENCY="$(read_opt default_worker_concurrency)"; DEFAULT_WORKER_CONCURRENCY="${DEFAULT_WORKER_CONCURRENCY:-$DEFAULT_DEFAULT_WORKER_CONCURRENCY}"
-PERFORMANCE_WORKER_CONCURRENCY="$(read_opt performance_worker_concurrency)"; PERFORMANCE_WORKER_CONCURRENCY="${PERFORMANCE_WORKER_CONCURRENCY:-$DEFAULT_PERFORMANCE_WORKER_CONCURRENCY}"
-MAX_FILE_UPLOAD_SIZE="$(read_opt max_file_upload_size)"; MAX_FILE_UPLOAD_SIZE="${MAX_FILE_UPLOAD_SIZE:-$DEFAULT_MAX_FILE_UPLOAD_SIZE}"
-MAX_FILE_EXTRACT_SIZE="$(read_opt max_file_extract_size)"; MAX_FILE_EXTRACT_SIZE="${MAX_FILE_EXTRACT_SIZE:-$DEFAULT_MAX_FILE_EXTRACT_SIZE}"
-SECRET_KEY_BASE="$(read_opt secret_key_base)"; SECRET_KEY_BASE="${SECRET_KEY_BASE:-}"
-PUBLIC_HOSTNAME_RAW="$(read_opt public_hostname)"; PUBLIC_HOSTNAME_RAW="${PUBLIC_HOSTNAME_RAW:-}"
+PUID="$(read_opt puid)"
+PUID="${PUID:-1000}"
+PGID="$(read_opt pgid)"
+PGID="${PGID:-1000}"
+MULTIUSER="$(read_opt multiuser)"
+MULTIUSER="${MULTIUSER:-true}"
+LIBRARY_PATH_RAW="$(read_opt library_path)"
+LIBRARY_PATH_RAW="${LIBRARY_PATH_RAW:-$DEFAULT_LIBRARY_PATH}"
+THUMBNAILS_PATH_RAW="$(read_opt thumbnails_path)"
+THUMBNAILS_PATH_RAW="${THUMBNAILS_PATH_RAW:-$DEFAULT_THUMBNAILS_PATH}"
+LOG_LEVEL="$(read_opt log_level)"
+LOG_LEVEL="${LOG_LEVEL:-$DEFAULT_LOG_LEVEL}"
+WEB_CONCURRENCY="$(read_opt web_concurrency)"
+WEB_CONCURRENCY="${WEB_CONCURRENCY:-$DEFAULT_WEB_CONCURRENCY}"
+RAILS_MAX_THREADS="$(read_opt rails_max_threads)"
+RAILS_MAX_THREADS="${RAILS_MAX_THREADS:-$DEFAULT_RAILS_MAX_THREADS}"
+DEFAULT_WORKER_CONCURRENCY="$(read_opt default_worker_concurrency)"
+DEFAULT_WORKER_CONCURRENCY="${DEFAULT_WORKER_CONCURRENCY:-$DEFAULT_DEFAULT_WORKER_CONCURRENCY}"
+PERFORMANCE_WORKER_CONCURRENCY="$(read_opt performance_worker_concurrency)"
+PERFORMANCE_WORKER_CONCURRENCY="${PERFORMANCE_WORKER_CONCURRENCY:-$DEFAULT_PERFORMANCE_WORKER_CONCURRENCY}"
+MAX_FILE_UPLOAD_SIZE="$(read_opt max_file_upload_size)"
+MAX_FILE_UPLOAD_SIZE="${MAX_FILE_UPLOAD_SIZE:-$DEFAULT_MAX_FILE_UPLOAD_SIZE}"
+MAX_FILE_EXTRACT_SIZE="$(read_opt max_file_extract_size)"
+MAX_FILE_EXTRACT_SIZE="${MAX_FILE_EXTRACT_SIZE:-$DEFAULT_MAX_FILE_EXTRACT_SIZE}"
+SECRET_KEY_BASE="$(read_opt secret_key_base)"
+SECRET_KEY_BASE="${SECRET_KEY_BASE:-}"
+PUBLIC_HOSTNAME_RAW="$(read_opt public_hostname)"
+PUBLIC_HOSTNAME_RAW="${PUBLIC_HOSTNAME_RAW:-}"
 
 [[ "$PUID" =~ ^[0-9]+$ ]] || die "puid must be a non-negative integer"
 [[ "$PGID" =~ ^[0-9]+$ ]] || die "pgid must be a non-negative integer"

monica/rootfs/etc/cont-init.d/99-run.sh

@@ -245,11 +245,11 @@ if [[ "${MEILISEARCH_LOCAL}" == true ]]; then
     }
 
     MEILISEARCH_CMD=(
-        env \
-            MEILI_ENV="${MEILISEARCH_ENVIRONMENT}" \
-            MEILI_NO_ANALYTICS="${MEILISEARCH_NO_ANALYTICS}" \
-            meilisearch \
-            --http-addr "${MEILISEARCH_ADDR}" \
+        env
+        MEILI_ENV="${MEILISEARCH_ENVIRONMENT}"
+        MEILI_NO_ANALYTICS="${MEILISEARCH_NO_ANALYTICS}"
+        meilisearch
+        --http-addr "${MEILISEARCH_ADDR}"
         --db-path "${MEILISEARCH_DB_PATH}"
     )
 

nextcloud/README.md

@@ -143,7 +143,7 @@ If you use clients for file syncing, the use of SQLite is highly discouraged.
 and you want to overcome this, follow the below steps:
 
 - 1. Install `mariadb` add-on, configure it with some random infos and start it. It is important to start it successfully in order to be seen by `nextcloud` in the network.
-- 2. Install `nextcloud` add-on (or restart it if you have already installed), watch the logs until you will notice the following `warning`:
+- 1. Install `nextcloud` add-on (or restart it if you have already installed), watch the logs until you will notice the following `warning`:
 
   ```bash
   WARNING: MariaDB addon was found! It can't be configured automatically due to the way Nextcloud works, but you can configure it manually when running the web UI for the first time using those values :
@@ -153,8 +153,8 @@ and you want to overcome this, follow the below steps:
   Host-name : core-mariadb:3306
   ```
 
-- 3. Go back at `mariadb` add-on, configure it with above credentials and restart it. Make sure the add-on is creating the `nextcloud` database.
-- 4. Go in the webui and fill all required info. Here you can view an example:
+- 1. Go back at `mariadb` add-on, configure it with above credentials and restart it. Make sure the add-on is creating the `nextcloud` database.
+- 1. Go in the webui and fill all required info. Here you can view an example:
 
 ![image](https://user-images.githubusercontent.com/19391765/207888717-50b43002-a5e2-4782-b5c9-1f582309df2b.png)
 

postgres_15/rootfs/etc/cont-init.d/99-run.sh

@@ -108,7 +108,7 @@ wait_for_postgres() {
     while ! pg_isready -h "$DB_HOSTNAME" -p "$DB_PORT" -U "$DB_USERNAME" > /dev/null 2>&1; do
         tries=$((tries + 1))
         [ "$tries" -ge 60 ] && {
-            bashio::log.error "Postgres did not start after 2 minutes, aborting."
+            bashio::log.error "Postgres did not start after 2 minutes, aborting."
             exit 1
         }
         echo "PostgreSQL is starting up... ($tries/60)"

qbittorrent/rootfs/etc/services.d/vpn-monitor/run

@@ -178,7 +178,8 @@ read -r VPN_IP VPN_COUNTRY <<< "${VPN_INFO_OUT}"
 bashio::log.info "VPN external IP: ${VPN_IP} (${VPN_COUNTRY})"
 
 while true; do
-    sleep "${VPN_CHECK_INTERVAL}" & wait $!
+    sleep "${VPN_CHECK_INTERVAL}" &
+    wait $!
 
     if ! current_out="$(get_ip_info)"; then
         bashio::log.warning "Failed to refresh external IP; keeping previous assumptions."

qbittorrent/rootfs/etc/services.d/vpn-upnp/run

@@ -253,9 +253,9 @@ config["Interval"]=$(( ${VPN_UPNP_INTERVAL} + (${VPN_UPNP_INTERVAL} / 2) ))
 
 bashio::log.info "VPN UPnP enabled, starting NAT-PMP/UPnP monitor with an interval of ${VPN_UPNP_INTERVAL} seconds (UPnP lease interval: ${config["Interval"]} seconds)."
 
-while true;
-do
-    sleep ${VPN_UPNP_INTERVAL} & wait $!
+while true; do
+    sleep ${VPN_UPNP_INTERVAL} &
+    wait $!
 
     if pnat_set; then
         bashio::log.info "NAT-PMP/UPnP Ok!"

scrutiny/rootfs/usr/local/bin/scrutiny-ha-influxdb-preflight

@@ -73,8 +73,8 @@ validate_backup_against_source() {
 		find . -mindepth 1 -print | sed -e 's#^\./##' -e 's#/$##' | LC_ALL=C sort
 	) >"$source_manifest"
 
-    tar -tzf "$archive" | \
-        sed -e "s#^${archive_root}/##" -e '/^$/d' -e 's#/$##' | \
+	tar -tzf "$archive" |
+		sed -e "s#^${archive_root}/##" -e '/^$/d' -e 's#/$##' |
 		LC_ALL=C sort >"$archive_manifest"
 
 	if ! cmp -s "$source_manifest" "$archive_manifest"; then

scrutiny_fa/scrutiny-ha-influxdb-preflight

@@ -73,8 +73,8 @@ validate_backup_against_source() {
 		find . -mindepth 1 -print | sed -e 's#^\./##' -e 's#/$##' | LC_ALL=C sort
 	) >"$source_manifest"
 
-    tar -tzf "$archive" | \
-        sed -e "s#^${archive_root}/##" -e '/^$/d' -e 's#/$##' | \
+	tar -tzf "$archive" |
+		sed -e "s#^${archive_root}/##" -e '/^$/d' -e 's#/$##' |
 		LC_ALL=C sort >"$archive_manifest"
 
 	if ! cmp -s "$source_manifest" "$archive_manifest"; then

seafile/rootfs/etc/cont-init.d/99-run.sh

@@ -108,8 +108,8 @@ sed -i "s|/shared|$DATA_LOCATION|g" /home/seafile/*.sh
 ADMIN_EMAIL_VAL="$(bashio::config 'SEAFILE_ADMIN_EMAIL')"
 ADMIN_PASSWORD_VAL="$(bashio::config 'SEAFILE_ADMIN_PASSWORD')"
 
-if [[ -n "${ADMIN_EMAIL_VAL}" && "${ADMIN_EMAIL_VAL}" != "null" \
-    && -n "${ADMIN_PASSWORD_VAL}" && "${ADMIN_PASSWORD_VAL}" != "null" ]]; then
+if [[ -n "${ADMIN_EMAIL_VAL}" && "${ADMIN_EMAIL_VAL}" != "null" &&
+    -n "${ADMIN_PASSWORD_VAL}" && "${ADMIN_PASSWORD_VAL}" != "null" ]]; then
     bashio::log.info "Seeding admin credentials"
 
     mkdir -p "${DATA_LOCATION}/conf"

seerr/config.yaml

@@ -1,8 +1,7 @@
 arch:
   - aarch64
   - amd64
-description:
-  Open-source media request and discovery manager for Jellyfin, Plex, and Emby
+description: Open-source media request and discovery manager for Jellyfin, Plex, and Emby
 devices:
   - /dev/dri
   - /dev/dri/card0

signalk/rootfs/etc/cont-init.d/99-run.sh

@@ -42,6 +42,5 @@ if [[ ! -f /data/version || "$current_version" != "$(cat /data/version)" ]]; the
     fi
 fi
 
-
 bashio::log.info "Starting application"
 sudo -u "$USER" -s /bin/sh -c "/home/node/signalk/startup.sh"

zoneminder/rootfs/etc/cont-init.d/99-run.sh

@@ -167,8 +167,8 @@ case "$(bashio::config "DB_CONNECTION")" in
                     -u "${ZM_DB_USER}" -p"${ZM_DB_PASS}" \
                     -h "${ZM_DB_HOST}" -P "${ZM_DB_PORT}" \
                     --routines --events --triggers \
-                    "${LEGACY_DB_NAME}" | \
-                    mysql \
+                    "${LEGACY_DB_NAME}" \
+                    | mysql \
                         -u "${ZM_DB_USER}" -p"${ZM_DB_PASS}" \
                         -h "${ZM_DB_HOST}" -P "${ZM_DB_PORT}" \
                         "${ZM_DB_NAME}"; then

zzz_archived_jellyseerr/config.yaml

@@ -1,8 +1,7 @@
 arch:
   - aarch64
   - amd64
-description:
-  Fork of overseerr for jellyfin support (deprecated, migrate to Seerr add-on)
+description: Fork of overseerr for jellyfin support (deprecated, migrate to Seerr add-on)
 devices:
   - /dev/dri
   - /dev/dri/card0

zzz_archived_paperless_ngx/rootfs/etc/cont-init.d/99-run.sh

@@ -90,7 +90,10 @@ set +u
 # container_environment, which is read by `with-contenv` when each service starts.
 S6_ENV_DIR=""
 for candidate in /var/run/s6/container_environment /run/s6/container_environment; do
-    if [ -d "$candidate" ]; then S6_ENV_DIR="$candidate"; break; fi
+    if [ -d "$candidate" ]; then
+        S6_ENV_DIR="$candidate"
+        break
+    fi
 done
 
 # For all relevant variables

zzz_archived_tor/rootfs/etc/s6-overlay/s6-rc.d/init-tor/run

@@ -38,8 +38,7 @@ fi
 # Checks if client names where configured when using stealth mode
 if bashio::config.true 'hidden_services' \
     && bashio::config.true 'stealth' \
-    && ! bashio::config.has_value 'client_names';
-then
+    && ! bashio::config.has_value 'client_names'; then
     bashio::log.fatal
     bashio::log.fatal 'Add-on configuration is incomplete.'
     bashio::log.fatal
@@ -132,8 +131,7 @@ fi
 
 # Configure bridges
 if bashio::config.exists 'bridges' \
-    && ! bashio::config.is_empty 'bridges';
-then
+    && ! bashio::config.is_empty 'bridges'; then
     bashio::log.info 'Use bridges:'
     echo "UseBridges 1" >> "${torrc}"
 
@@ -176,14 +174,12 @@ if bashio::config.true 'hidden_services'; then
 fi
 
 # Configure stealth mode
-if bashio::config.true 'hidden_services' && bashio::config.true 'stealth';
-then
+if bashio::config.true 'hidden_services' && bashio::config.true 'stealth'; then
     # Following the documentation at:
     # https://community.torproject.org/onion-services/advanced/client-auth/
     while read -r clientname; do
         # Generate key is they do not exist yet
-        if ! bashio::fs.file_exists "${authorized_clients_dir}/${clientname}.auth"
-        then
+        if ! bashio::fs.file_exists "${authorized_clients_dir}/${clientname}.auth"; then
             key=$(openssl genpkey -algorithm x25519)
 
             private_key=$(