Updater bot : openproject updated to 17.7.2 (upstream 17.7.2)

A single failing matrix leg in the builder reverts the entire push, so any
transient error inside a build silently undoes a good version bump.

Observed on zoneminder 1.38.4 (run 31678876409, attempt 1): the aarch64 leg
failed after 44 s inside the ha_autoapps.sh layer with

  curl: (92) HTTP/2 stream 1 was not closed cleanly: REFUSED_STREAM (err 7)
  gzip: stdin: unexpected end of file
  tar: Error is not recoverable: exiting now

while the amd64 leg built and pushed 1.38.4 to GHCR. revert-on-failure then
pushed 0ee26fc72 reverting the bump; a manual re-run of the same source went
fully green. Because that re-run flips the run conclusion to success, these
incidents do not even show up in run-conclusion statistics.

The build-image step is now run tolerantly (continue-on-error) and repeated
once when the first attempt fails. Only a second failure reaches
revert-on-failure, so genuinely broken add-ons are still reverted, one build
later than before.

The retry is unconditional rather than gated on the log text looking
transient: BuildKit reformats error strings and registry/runner failures
spell themselves many different ways, so a text classifier would eventually
stop reverting real breakage. It is also cheap - the add-ons that fail
deterministically on every push (ente, comixed, binance-trading-bot) each
fail in 16-34 s.

Co-authored-by: Claude Opus 5 <noreply@anthropic.com>

.github/workflows/onpush_builder.yaml

@@ -285,8 +285,52 @@ jobs:
             echo "${{ matrix.arch }} is not a valid architecture for ${{ matrix.addon }}, skipping build."
           fi
 
+      # A single failing leg here auto-reverts the whole push (revert-on-failure
+      # below), so a transient error inside the build - a truncated download in
+      # a RUN layer, a registry hiccup - silently undoes a perfectly good
+      # version bump. Seen on zoneminder 1.38.4 (run 31678876409): the aarch64
+      # leg died on "curl: (92) HTTP/2 stream 1 was not closed cleanly:
+      # REFUSED_STREAM", the commit was reverted, and a manual re-run of the
+      # identical source then went green. (A lost runner or a cancelled job is
+      # not covered by this - no later step gets to run at all.)
+      #
+      # So: build once tolerantly, and only let a second failure reach the
+      # revert. A genuinely broken add-on fails twice and is still reverted,
+      # one build later. Retrying is unconditional rather than gated on the
+      # log text looking "transient" - BuildKit reformats error strings and
+      # registry/runner failures spell themselves a dozen ways, so classifying
+      # by log text would silently stop reverting real breakage. It is also
+      # cheap: the add-ons that fail deterministically on every push each fail
+      # in 16-34 s.
       - name: Build ${{ matrix.addon }} add-on
+        id: build
         if: steps.info.outputs.build_arch == 'true' && steps.info.outputs.has_dockerfile == 'true'
+        continue-on-error: true
+        uses: home-assistant/builder/actions/build-image@2026.06.0
+        with:
+          arch: ${{ matrix.arch }}
+          cache-gha: "false"
+          cache-gha-scope: ${{ matrix.addon }}-${{ matrix.arch }}
+          context: ./${{ matrix.addon }}
+          file: ${{ steps.info.outputs.dockerfile }}
+          image: ${{ steps.info.outputs.image }}
+          image-tags: |
+            ${{ steps.info.outputs.version }}
+            latest
+          version: ${{ steps.info.outputs.version }}
+          push: "true"
+          cosign: "false"
+          container-registry-password: ${{ secrets.GITHUB_TOKEN }}
+          labels: ${{ steps.info.outputs.labels }}
+          build-args: ${{ steps.info.outputs.build_args }}
+
+      # Keep these inputs identical to the first attempt above - this step is
+      # that attempt, run a second time, and nothing else. There is deliberately
+      # no pause in between: re-running the earlier layers already spaces the
+      # two network windows apart, and a sleep step would only add somewhere
+      # else for the retry to be skipped from.
+      - name: Build ${{ matrix.addon }} add-on (retry after failed attempt)
+        if: steps.build.outcome == 'failure'
         uses: home-assistant/builder/actions/build-image@2026.06.0
         with:
           arch: ${{ matrix.arch }}

aurral/CHANGELOG.md

@@ -1,4 +1,7 @@
  
+## 2.4.0 (2026-08-13)
+- Update to latest version from lklynet/aurral (changelog : https://github.com/lklynet/aurral/releases)
+ 
 ## 2.1.0 (2026-08-08)
 - Update to latest version from lklynet/aurral (changelog : https://github.com/lklynet/aurral/releases)
  

aurral/config.yaml

@@ -1,5 +1,5 @@
 name: Aurral
-version: "2.1.0"
+version: "2.4.0"
 slug: aurral
 description: >-
   Self-hosted music discovery, request management, flows, and playlist

aurral/updater.json

@@ -1,9 +1,9 @@
 {
-  "last_update": "2026-08-08",
+  "last_update": "2026-08-13",
   "repository": "alexbelgium/hassio-addons",
   "slug": "aurral",
   "source": "github",
   "upstream_repo": "lklynet/aurral",
-  "upstream_version": "2.1.0",
+  "upstream_version": "2.4.0",
   "github_beta": false
 }

birdnet-pipy/CHANGELOG.md

@@ -1,4 +1,7 @@
  
+## 0.8.6 (2026-08-13)
+- Update to latest version from Suncuss/BirdNET-PiPy (changelog : https://github.com/Suncuss/BirdNET-PiPy/releases)
+ 
 ## 0.8.5 (2026-08-01)
 - Update to latest version from Suncuss/BirdNET-PiPy (changelog : https://github.com/Suncuss/BirdNET-PiPy/releases)
  

birdnet-pipy/config.yaml

@@ -96,4 +96,4 @@ schema:
   ssl: bool?
 slug: birdnet-pipy
 url: https://github.com/alexbelgium/hassio-addons/tree/master/birdnet-pipy
-version: "0.8.5"
+version: "0.8.6"

birdnet-pipy/updater.json

@@ -1,8 +1,8 @@
 {
-  "last_update": "2026-08-01",
+  "last_update": "2026-08-13",
   "repository": "alexbelgium/hassio-addons",
   "slug": "birdnet-pipy",
   "source": "github",
   "upstream_repo": "Suncuss/BirdNET-PiPy",
-  "upstream_version": "0.8.5"
+  "upstream_version": "0.8.6"
 }

browser_brave/CHANGELOG.md

@@ -1,4 +1,7 @@
  
+## 1.93.136-ls122 (2026-08-13)
+- Update to latest version from linuxserver/docker-brave (changelog : https://github.com/linuxserver/docker-brave/releases)
+ 
 ## 1.93.134-ls121 (2026-08-08)
 - Update to latest version from linuxserver/docker-brave (changelog : https://github.com/linuxserver/docker-brave/releases)
  

browser_brave/config.yaml

@@ -69,5 +69,5 @@ slug: brave
 tmpfs: true
 udev: true
 url: https://github.com/alexbelgium/hassio-addons
-version: "1.93.134-ls121"
+version: "1.93.136-ls122"
 video: true

browser_brave/updater.json

@@ -1,9 +1,9 @@
 {
   "github_fulltag": "true",
-  "last_update": "2026-08-08",
+  "last_update": "2026-08-13",
   "repository": "alexbelgium/hassio-addons",
   "slug": "brave",
   "source": "github",
   "upstream_repo": "linuxserver/docker-brave",
-  "upstream_version": "1.93.134-ls121"
+  "upstream_version": "1.93.136-ls122"
 }

browser_chromium/CHANGELOG.md

@@ -1,4 +1,8 @@
  
+## 2026.08.13 (2026-08-13)
+- Update to latest version from linuxserver/docker-chromium (changelog : https://github.com/linuxserver/docker-chromium/releases)
+- Upstream tag : version-e8713bf7
+ 
 ## 2026.08.01.1 (2026-08-01)
 - Update to latest version from linuxserver/docker-chromium (changelog : https://github.com/linuxserver/docker-chromium/releases)
 - Upstream tag : version-e2e1ec9c

browser_chromium/config.yaml

@@ -71,5 +71,5 @@ slug: chromium
 tmpfs: true
 udev: true
 url: https://github.com/alexbelgium/hassio-addons
-version: "2026.08.01.1"
+version: "2026.08.13"
 video: true

browser_chromium/updater.json

@@ -1,9 +1,9 @@
 {
   "github_fulltag": "true",
-  "last_update": "2026-08-01",
+  "last_update": "2026-08-13",
   "repository": "alexbelgium/hassio-addons",
   "slug": "chromium",
   "source": "github",
   "upstream_repo": "linuxserver/docker-chromium",
-  "upstream_version": "version-e2e1ec9c"
+  "upstream_version": "version-e8713bf7"
 }

browserless_chrome/CHANGELOG.md

@@ -1,4 +1,7 @@
  
+## 2.55.4 (2026-08-13)
+- Update to latest version from browserless/chrome (changelog : https://github.com/browserless/chrome/releases)
+ 
 ## 2.55.3 (2026-08-08)
 - Update to latest version from browserless/chrome (changelog : https://github.com/browserless/chrome/releases)
  

browserless_chrome/config.yaml

@@ -86,5 +86,5 @@ schema:
 slug: browserless_chrome
 udev: true
 url: https://github.com/alexbelgium/hassio-addons/tree/master/browserless_chrome
-version: "2.55.3"
+version: "2.55.4"
 webui: "[PROTO:ssl]://[HOST]:[PORT:3000]/docs"

browserless_chrome/updater.json

@@ -1,9 +1,9 @@
 {
   "github_tagfilter": "v",
-  "last_update": "2026-08-08",
+  "last_update": "2026-08-13",
   "repository": "alexbelgium/hassio-addons",
   "slug": "browserless_chrome",
   "source": "github",
   "upstream_repo": "browserless/chrome",
-  "upstream_version": "2.55.3"
+  "upstream_version": "2.55.4"
 }

calibre_web/CHANGELOG.md

@@ -1,3 +1,6 @@
+ 
+## 0.6.27 (2026-08-13)
+- Update to latest version from linuxserver/docker-calibre-web (changelog : https://github.com/linuxserver/docker-calibre-web/releases)
 
 ## 0.6.26-2 (2026-04-06)
 - Fix: Install calibre (calibredb) at build time to fix 500 error when downloading books

calibre_web/config.yaml

@@ -116,5 +116,5 @@ schema:
 slug: calibre-web
 udev: true
 url: https://github.com/alexbelgium/hassio-addons/tree/master/calibre_web
-version: "0.6.26-2"
+version: "0.6.27"
 video: true

calibre_web/updater.json

@@ -1,9 +1,9 @@
 {
-  "last_update": "2026-02-07",
+  "last_update": "2026-08-13",
   "paused": false,
   "repository": "alexbelgium/hassio-addons",
   "slug": "calibre-web",
   "source": "github",
   "upstream_repo": "linuxserver/docker-calibre-web",
-  "upstream_version": "0.6.26"
+  "upstream_version": "0.6.27"
 }

claude_desktop/CHANGELOG.md

@@ -1,4 +1,8 @@
  
+## 07308544 (2026-08-13)
+- Update to latest version from aaddrick/claude-desktop-debian (changelog : https://github.com/aaddrick/claude-desktop-debian/releases)
+- Upstream tag : v3.2.2+claude1.28929.0
+ 
 ## 07308543 (2026-08-08)
 - Update to latest version from linuxserver/docker-baseimage-selkies (changelog : https://github.com/linuxserver/docker-baseimage-selkies/releases)
 - Upstream tag : debiantrixie-version-07308543

claude_desktop/config.yaml

@@ -136,5 +136,5 @@ schema:
 slug: claude_desktop
 udev: true
 url: https://github.com/alexbelgium/hassio-addons
-version: "07308543"
+version: "07308544"
 video: true

claude_desktop/updater.json

@@ -4,6 +4,6 @@
   "github_fulltag": true,
   "slug": "claude_desktop",
   "paused": false,
-  "upstream_version": "debiantrixie-version-07308543",
-  "last_update": "2026-08-08"
+  "upstream_version": "v3.2.2+claude1.28929.0",
+  "last_update": "2026-08-13"
 }

cleanuparr/CHANGELOG.md

@@ -1,4 +1,7 @@
  
+## 2.10.5 (2026-08-13)
+- Update to latest version from Cleanuparr/Cleanuparr (changelog : https://github.com/Cleanuparr/Cleanuparr/releases)
+ 
 ## 2.10.3 (2026-08-08)
 - Update to latest version from Cleanuparr/Cleanuparr (changelog : https://github.com/Cleanuparr/Cleanuparr/releases)
  

cleanuparr/Dockerfile

@@ -11,7 +11,7 @@
 #=== Home Assistant Addon ===#
 
 # ARGs used in FROM must be declared before any FROM instruction
-ARG BUILD_UPSTREAM="2.10.3"
+ARG BUILD_UPSTREAM="2.10.5"
 
 #################
 # 1 Build Image #

cleanuparr/config.yaml

@@ -91,5 +91,5 @@ schema:
   TZ: str?
 slug: cleanuparr
 url: https://github.com/alexbelgium/hassio-addons/tree/master/cleanuparr
-version: "2.10.3"
+version: "2.10.5"
 webui: "[PROTO:ssl]://[HOST]:[PORT:11011]"

cleanuparr/updater.json

@@ -1,8 +1,8 @@
 {
-  "last_update": "2026-08-08",
+  "last_update": "2026-08-13",
   "repository": "alexbelgium/hassio-addons",
   "slug": "cleanuparr",
   "source": "github",
   "upstream_repo": "Cleanuparr/Cleanuparr",
-  "upstream_version": "2.10.3"
+  "upstream_version": "2.10.5"
 }

collabora/CHANGELOG.md

@@ -1,4 +1,7 @@
  
+## 26.04.3.1.1 (2026-08-13)
+- Update to latest version from collabora/code
+ 
 ## 26.04.2.4.1 (2026-07-26)
 - Rebuild on a Debian base: upstream turned collabora/code into a distroless image with no shell, which broke the addon build entirely. collabora/code stays the tracked upstream image in build.json, but is now a build stage whose payload is copied onto ghcr.io/hassio-addons/debian-base, and the addon ships its own launcher in place of the removed /start-collabora-online.sh
 - build.json names the architecture explicitly again (`collabora/code:latest-amd64` and `collabora/code:latest-arm64`). The builder never passes `--platform`, so the tag is the only thing that decides which binaries land in the addon

collabora/config.yaml

@@ -48,5 +48,5 @@ schema:
   username: str
 slug: collabora
 url: https://github.com/alexbelgium/hassio-addons
-version: "26.04.2.4.1"
+version: "26.04.3.1.1"
 webui: "[PROTO:ssl]://[HOST]:[PORT:9980]/browser/dist/admin/admin.html"

collabora/updater.json

@@ -1,9 +1,9 @@
 {
   "github_exclude": "sha256",
-  "last_update": "2026-07-26",
+  "last_update": "2026-08-13",
   "repository": "alexbelgium/hassio-addons",
   "slug": "collabora",
   "source": "dockerhub",
   "upstream_repo": "collabora/code",
-  "upstream_version": "26.04.2.4.1"
+  "upstream_version": "26.04.3.1.1"
 }

elasticsearch/CHANGELOG.md

@@ -1,3 +1,6 @@
+ 
+## 8.19.20 (2026-08-13)
+- Update to latest version from elastic/elasticsearch (changelog : https://github.com/elastic/elasticsearch/releases)
 ## 8.19.19.2 (21-07-2026)
 - Minor bugs fixed
  

elasticsearch/Dockerfile

@@ -14,7 +14,7 @@
 # 1 Build Image #
 #################
 
-ARG BUILD_UPSTREAM="8.19.19"
+ARG BUILD_UPSTREAM="8.19.20"
 # Pull from Elastic's own registry (multi-arch, published atomically with the
 # GitHub release the updater tracks) rather than the Docker Hub "library"
 # mirror, whose arm64/aarch64 tag lags hours behind and breaks the aarch64

elasticsearch/config.yaml

@@ -90,4 +90,4 @@ slug: elasticsearch
 startup: services
 udev: true
 url: https://github.com/alexbelgium/hassio-addons/tree/master/elasticsearch
-version: "8.19.19.2"
+version: "8.19.20"

elasticsearch/updater.json

@@ -1,10 +1,10 @@
 {
   "github_fulltag": false,
   "github_tagfilter": "v8.19",
-  "last_update": "2026-07-21",
+  "last_update": "2026-08-13",
   "repository": "alexbelgium/hassio-addons",
   "slug": "elasticsearch",
   "source": "github",
   "upstream_repo": "elastic/elasticsearch",
-  "upstream_version": "8.19.19"
+  "upstream_version": "8.19.20"
 }

emby_beta/CHANGELOG.md

@@ -1,4 +1,7 @@
  
+## 4.10.0.24 (2026-08-13)
+- Update to latest version from linuxserver/docker-emby (changelog : https://github.com/linuxserver/docker-emby/releases)
+ 
 ## 4.10.0.22 (2026-08-01)
 - Update to latest version from linuxserver/docker-emby (changelog : https://github.com/linuxserver/docker-emby/releases)
  

emby_beta/Dockerfile

@@ -16,7 +16,7 @@
 
 ARG BUILD_FROM
 ARG BUILD_VERSION
-ARG BUILD_UPSTREAM="4.10.0.22"
+ARG BUILD_UPSTREAM="4.10.0.24"
 FROM ${BUILD_FROM}
 
 ##################

emby_beta/config.yaml

@@ -122,5 +122,5 @@ schema:
 slug: emby_nas
 udev: true
 url: https://github.com/alexbelgium/hassio-addons/tree/master/emby
-version: "4.10.0.22"
+version: "4.10.0.24"
 video: true

emby_beta/updater.json

@@ -1,9 +1,9 @@
 {
   "github_beta": "true",
-  "last_update": "2026-08-01",
+  "last_update": "2026-08-13",
   "repository": "alexbelgium/hassio-addons",
   "slug": "emby",
   "source": "github",
   "upstream_repo": "linuxserver/docker-emby",
-  "upstream_version": "4.10.0.22"
+  "upstream_version": "4.10.0.24"
 }

ente/CHANGELOG.md

@@ -1,3 +1,7 @@
+ 
+## 4.4.26 (2026-08-13)
+- Update to latest version from ente/ente (changelog : https://github.com/ente/ente/releases)
+- Upstream tag : 1.3.61
 ## 4.4.25 (2026-08-08)
 - Update to latest version from ente/ente (changelog : https://github.com/ente/ente/releases)
 - Fix build failure: upstream renamed the `ente-io` org to `ente`, so the base image is now `ghcr.io/ente/server` (GHCR does not follow the rename)

ente/config.yaml

@@ -131,6 +131,6 @@ schema:
 slug: ente
 udev: true
 url: https://github.com/alexbelgium/hassio-addons
-version: "4.4.25"
+version: "4.4.26"
 video: true
 webui: http://[HOST]:[PORT:3000]

ente/updater.json

@@ -1,9 +1,9 @@
 {
   "github_beta": "false",
-  "last_update": "2026-08-08",
+  "last_update": "2026-08-13",
   "repository": "alexbelgium/hassio-addons",
   "slug": "ente",
   "source": "github",
   "upstream_repo": "ente/ente",
-  "upstream_version": "4.4.25"
+  "upstream_version": "1.3.61"
 }

epicgamesfree/CHANGELOG.md

@@ -1,4 +1,8 @@
  
+## 2026.08.13 (2026-08-13)
+- Update to latest version from charlocharlie/epicgames-freegames
+- Upstream tag : debian-2026-08-13
+ 
 ## 2026.08.04 (2026-08-04)
 - Update to latest version from charlocharlie/epicgames-freegames
 - Upstream tag : debian-2026-08-04

epicgamesfree/config.yaml

@@ -88,5 +88,5 @@ schema:
 slug: epicgamesfree
 udev: true
 url: https://github.com/alexbelgium/hassio-addons
-version: "2026.08.04"
+version: "2026.08.13"
 webui: "[PROTO:ssl]://[HOST]:[PORT:3000]"

epicgamesfree/updater.json

@@ -2,10 +2,10 @@
   "dockerhub_by_date": true,
   "dockerhub_list_size": 2,
   "github_exclude": "-",
-  "last_update": "2026-08-04",
+  "last_update": "2026-08-13",
   "repository": "alexbelgium/hassio-addons",
   "slug": "epicgamesfree",
   "source": "dockerhub",
   "upstream_repo": "charlocharlie/epicgames-freegames",
-  "upstream_version": "debian-2026-08-04"
+  "upstream_version": "debian-2026-08-13"
 }

grav/CHANGELOG.md

@@ -1,4 +1,7 @@
  
+## 2.0.18 (2026-08-13)
+- Update to latest version from linuxserver/docker-grav (changelog : https://github.com/linuxserver/docker-grav/releases)
+ 
 ## 2.0.17 (2026-08-08)
 - Update to latest version from linuxserver/docker-grav (changelog : https://github.com/linuxserver/docker-grav/releases)
  

grav/Dockerfile

@@ -16,7 +16,7 @@
 
 ARG BUILD_FROM
 ARG BUILD_VERSION
-ARG BUILD_UPSTREAM="2.0.17"
+ARG BUILD_UPSTREAM="2.0.18"
 FROM ${BUILD_FROM}
 
 ##################

grav/config.yaml

@@ -89,5 +89,5 @@ schema:
 slug: grav
 udev: true
 url: https://github.com/alexbelgium/hassio-addons
-version: "2.0.17"
+version: "2.0.18"
 webui: "[PROTO:ssl]://[HOST]:[PORT:80]"

grav/updater.json

@@ -1,9 +1,9 @@
 {
   "github_beta": false,
-  "last_update": "2026-08-08",
+  "last_update": "2026-08-13",
   "repository": "alexbelgium/hassio-addons",
   "slug": "grav",
   "source": "github",
   "upstream_repo": "linuxserver/docker-grav",
-  "upstream_version": "2.0.17"
+  "upstream_version": "2.0.18"
 }

jackett/CHANGELOG.md

@@ -1,4 +1,7 @@
  
+## 0.24.2404 (2026-08-13)
+- Update to latest version from linuxserver/docker-jackett (changelog : https://github.com/linuxserver/docker-jackett/releases)
+ 
 ## 0.24.2342 (2026-08-08)
 - Update to latest version from linuxserver/docker-jackett (changelog : https://github.com/linuxserver/docker-jackett/releases)
  

jackett/config.yaml

@@ -106,5 +106,5 @@ schema:
 slug: jackett_nas
 udev: true
 url: https://github.com/alexbelgium/hassio-addons/tree/master/jackett
-version: "0.24.2342"
+version: "0.24.2404"
 webui: http://[HOST]:[PORT:9117]

jackett/updater.json

@@ -1,8 +1,8 @@
 {
-  "last_update": "2026-08-08",
+  "last_update": "2026-08-13",
   "repository": "alexbelgium/hassio-addons",
   "slug": "jackett",
   "source": "github",
   "upstream_repo": "linuxserver/docker-jackett",
-  "upstream_version": "0.24.2342"
+  "upstream_version": "0.24.2404"
 }

kometa/CHANGELOG.md

@@ -1,4 +1,7 @@
  
+## 2.4.7 (2026-08-13)
+- Update to latest version from linuxserver/docker-kometa (changelog : https://github.com/linuxserver/docker-kometa/releases)
+ 
 ## 2.4.6 (2026-08-01)
 - Update to latest version from linuxserver/docker-kometa (changelog : https://github.com/linuxserver/docker-kometa/releases)
  

kometa/config.yaml

@@ -96,4 +96,4 @@ schema:
 slug: kometa
 udev: true
 url: https://github.com/alexbelgium/hassio-addons/tree/master/kometa
-version: "2.4.6"
+version: "2.4.7"

kometa/updater.json

@@ -1,8 +1,8 @@
 {
-  "last_update": "2026-08-01",
+  "last_update": "2026-08-13",
   "repository": "alexbelgium/hassio-addons",
   "slug": "kometa",
   "source": "github",
   "upstream_repo": "linuxserver/docker-kometa",
-  "upstream_version": "2.4.6"
+  "upstream_version": "2.4.7"
 }

komga/CHANGELOG.md

@@ -1,3 +1,6 @@
+ 
+## 1.26.3 (2026-08-13)
+- Update to latest version from gotson/komga (changelog : https://github.com/gotson/komga/releases)
 ## 1.26.1.4 (12-08-2026)
 - Minor bugs fixed
 ## 1.26.1.3 (2026-08-12)

komga/Dockerfile

@@ -16,7 +16,7 @@
 
 ARG BUILD_FROM
 ARG BUILD_VERSION
-ARG BUILD_UPSTREAM="1.26.1"
+ARG BUILD_UPSTREAM="1.26.3"
 FROM ${BUILD_FROM}
 ENV BASHIO_VERSION=0.14.3
 

komga/config.yaml

@@ -101,4 +101,4 @@ schema:
 slug: komga
 udev: true
 url: https://github.com/alexbelgium/hassio-addons/tree/master/komga
-version: "1.26.1.4"
+version: "1.26.3"

komga/updater.json

@@ -1,9 +1,9 @@
 {
   "github_beta": "false",
-  "last_update": "2026-08-11",
+  "last_update": "2026-08-13",
   "repository": "alexbelgium/hassio-addons",
   "slug": "komga",
   "source": "github",
   "upstream_repo": "gotson/komga",
-  "upstream_version": "1.26.1"
+  "upstream_version": "1.26.3"
 }

maintainerr/CHANGELOG.md

@@ -1,4 +1,7 @@
  
+## 3.22.1 (2026-08-13)
+- Update to latest version from maintainerr/maintainerr (changelog : https://github.com/maintainerr/maintainerr/releases)
+ 
 ## 3.22.0 (2026-08-08)
 - Update to latest version from maintainerr/maintainerr (changelog : https://github.com/maintainerr/maintainerr/releases)
  

maintainerr/Dockerfile

@@ -11,7 +11,7 @@
 #=== Home Assistant Addon ===#
 
 # ARGs used in FROM must be declared before any FROM instruction
-ARG BUILD_UPSTREAM="3.22.0"
+ARG BUILD_UPSTREAM="3.22.1"
 
 ############################
 # 0) Tools stage           #

maintainerr/config.yaml

@@ -88,5 +88,5 @@ schema:
   TZ: str?
 slug: maintainerr
 url: https://github.com/alexbelgium/hassio-addons/tree/master/maintainerr
-version: "3.22.0"
+version: "3.22.1"
 webui: "[PROTO:ssl]://[HOST]:[PORT:6246]"

maintainerr/updater.json

@@ -1,8 +1,8 @@
 {
-  "last_update": "2026-08-08",
+  "last_update": "2026-08-13",
   "repository": "alexbelgium/hassio-addons",
   "slug": "maintainerr",
   "source": "github",
   "upstream_repo": "maintainerr/maintainerr",
-  "upstream_version": "3.22.0"
+  "upstream_version": "3.22.1"
 }

nextcloud/CHANGELOG.md

@@ -1,4 +1,7 @@
  
+## 34.0.3 (2026-08-13)
+- Update to latest version from linuxserver/docker-nextcloud (changelog : https://github.com/linuxserver/docker-nextcloud/releases)
+ 
 ## 34.0.2 (2026-07-25)
 - Update to latest version from linuxserver/docker-nextcloud (changelog : https://github.com/linuxserver/docker-nextcloud/releases)
  

nextcloud/config.yaml

@@ -151,5 +151,5 @@ slug: nextcloud_ocr
 uart: true
 udev: true
 url: https://github.com/alexbelgium/hassio-addons/tree/master/nextcloud
-version: "34.0.2"
+version: "34.0.3"
 webui: https://[HOST]:[PORT:443]

nextcloud/updater.json

@@ -1,8 +1,8 @@
 {
-  "last_update": "2026-07-25",
+  "last_update": "2026-08-13",
   "repository": "alexbelgium/hassio-addons",
   "slug": "nextcloud",
   "source": "github",
   "upstream_repo": "linuxserver/docker-nextcloud",
-  "upstream_version": "34.0.2"
+  "upstream_version": "34.0.3"
 }

obsidian_syncserver_solo/CHANGELOG.md

@@ -1,3 +1,7 @@
+ 
+## 3.5.2.1 (2026-08-13)
+- Update to latest version from library/couchdb
+- Upstream tag : 3.5.2.1-nouveau
 ## 3.5.2 (12-08-2026)
 - Minor bugs fixed
 # Changelog

obsidian_syncserver_solo/config.yaml

@@ -2,7 +2,7 @@ name: "Obsidian Sync Server"
 slug: obsidian_syncserver_solo
 image: ghcr.io/alexbelgium/obsidian_syncserver_solo-{arch}
 description: "Self-hosted Obsidian LiveSync backend on CouchDB. Plain HTTP — put your own reverse proxy in front for TLS."
-version: "3.5.2"
+version: "3.5.2.1"
 url: "https://github.com/alexbelgium/hassio-addons/tree/master/obsidian_syncserver_solo"
 arch:
   - amd64

obsidian_syncserver_solo/updater.json

@@ -1,7 +1,7 @@
 {
   "source": "dockerhub",
   "upstream_repo": "library/couchdb",
-  "upstream_version": "3.5.2",
-  "last_update": "2026-08-12",
+  "upstream_version": "3.5.2.1-nouveau",
+  "last_update": "2026-08-13",
   "slug": "obsidian_syncserver_solo"
 }

obsidian_syncserver_ssl/CHANGELOG.md

@@ -1,3 +1,7 @@
+ 
+## 3.5.2.1 (2026-08-13)
+- Update to latest version from library/couchdb
+- Upstream tag : 3.5.2.1-nouveau
 ## 3.5.2 (12-08-2026)
 - Minor bugs fixed
 # Changelog

obsidian_syncserver_ssl/config.yaml

@@ -2,7 +2,7 @@ name: "Obsidian Sync Server SSL"
 slug: obsidian_syncserver_ssl
 image: ghcr.io/alexbelgium/obsidian_syncserver_ssl-{arch}
 description: "Self-hosted Obsidian LiveSync backend on CouchDB, serving HTTPS with your own certificates from /ssl. Supports mobile Obsidian."
-version: "3.5.2"
+version: "3.5.2.1"
 url: "https://github.com/alexbelgium/hassio-addons/tree/master/obsidian_syncserver_ssl"
 arch:
   - amd64

obsidian_syncserver_ssl/updater.json

@@ -1,7 +1,7 @@
 {
   "source": "dockerhub",
   "upstream_repo": "library/couchdb",
-  "upstream_version": "3.5.2",
-  "last_update": "2026-08-12",
+  "upstream_version": "3.5.2.1-nouveau",
+  "last_update": "2026-08-13",
   "slug": "obsidian_syncserver_ssl"
 }

openproject/CHANGELOG.md

@@ -1,4 +1,7 @@
  
+## 17.7.2 (2026-08-13)
+- Update to latest version from opf/openproject (changelog : https://github.com/opf/openproject/releases)
+ 
 ## 17.7.1 (2026-08-08)
 - Update to latest version from opf/openproject (changelog : https://github.com/opf/openproject/releases)
  

openproject/config.yaml

@@ -34,5 +34,5 @@ schema:
 slug: openproject
 udev: true
 url: https://github.com/alexbelgium/hassio-addons/tree/master/openproject
-version: "17.7.1"
+version: "17.7.2"
 webui: "[PROTO:ssl]://[HOST]:[PORT:8080]"

openproject/updater.json

@@ -1,8 +1,8 @@
 {
-  "last_update": "2026-08-08",
+  "last_update": "2026-08-13",
   "repository": "alexbelgium/hassio-addons",
   "slug": "openproject",
   "source": "github",
   "upstream_repo": "opf/openproject",
-  "upstream_version": "17.7.1"
+  "upstream_version": "17.7.2"
 }

plex/CHANGELOG.md

@@ -1,4 +1,8 @@
  
+## 1.43.3.10861.319 (2026-08-13)
+- Update to latest version from linuxserver/docker-plex (changelog : https://github.com/linuxserver/docker-plex/releases)
+- Upstream tag : 1.43.3.10861-07dfddaeb-ls319
+ 
 ## 1.43.3.10861.318 (2026-08-08)
 - Update to latest version from linuxserver/docker-plex (changelog : https://github.com/linuxserver/docker-plex/releases)
 - Upstream tag : 1.43.3.10861-07dfddaeb-ls318

plex/config.yaml

@@ -175,6 +175,6 @@ slug: plex_nas
 udev: true
 url: https://github.com/alexbelgium/hassio-addons/tree/master/plex
 usb: true
-version: "1.43.3.10861.318"
+version: "1.43.3.10861.319"
 video: true
 webui: "[PROTO:ssl]://[HOST]:[PORT:32400]/web"

plex/updater.json

@@ -1,9 +1,9 @@
 {
   "github_fulltag": "true",
-  "last_update": "2026-08-08",
+  "last_update": "2026-08-13",
   "repository": "alexbelgium/hassio-addons",
   "slug": "plex",
   "source": "github",
   "upstream_repo": "linuxserver/docker-plex",
-  "upstream_version": "1.43.3.10861-07dfddaeb-ls318"
+  "upstream_version": "1.43.3.10861-07dfddaeb-ls319"
 }

prowlarr/CHANGELOG.md

@@ -1,4 +1,8 @@
  
+## 2.6.2.5548.10 (2026-08-13)
+- Update to latest version from linuxserver/docker-prowlarr (changelog : https://github.com/linuxserver/docker-prowlarr/releases)
+- Upstream tag : nightly-2.6.2.5548-ls10
+ 
 ## 2.6.2.5534.9 (2026-08-11)
 - Update to latest version from linuxserver/docker-prowlarr (changelog : https://github.com/linuxserver/docker-prowlarr/releases)
 - Upstream tag : nightly-2.6.2.5534-ls9

prowlarr/config.yaml

@@ -110,4 +110,4 @@ schema:
 slug: prowlarr
 udev: true
 url: https://github.com/alexbelgium/hassio-addons
-version: "2.6.2.5534.9"
+version: "2.6.2.5548.10"

prowlarr/updater.json

@@ -1,10 +1,10 @@
 {
   "github_beta": "true",
   "github_fulltag": "true",
-  "last_update": "2026-08-11",
+  "last_update": "2026-08-13",
   "repository": "alexbelgium/hassio-addons",
   "slug": "prowlarr",
   "source": "github",
   "upstream_repo": "linuxserver/docker-prowlarr",
-  "upstream_version": "nightly-2.6.2.5534-ls9"
+  "upstream_version": "nightly-2.6.2.5548-ls10"
 }

sabnzbd/CHANGELOG.md

@@ -1,4 +1,7 @@
  
+## 5.1.0 (2026-08-13)
+- Update to latest version from linuxserver/docker-sabnzbd (changelog : https://github.com/linuxserver/docker-sabnzbd/releases)
+ 
 ## 5.0.4 (2026-06-11)
 - Update to latest version from linuxserver/docker-sabnzbd (changelog : https://github.com/linuxserver/docker-sabnzbd/releases)
 

sabnzbd/config.yaml

@@ -106,5 +106,5 @@ schema:
 slug: sabnzbd
 udev: true
 url: https://github.com/alexbelgium/hassio-addons
-version: "5.0.4"
+version: "5.1.0"
 webui: http://[HOST]:[PORT:8080]

sabnzbd/updater.json

@@ -1,8 +1,8 @@
 {
-  "last_update": "2026-06-11",
+  "last_update": "2026-08-13",
   "repository": "alexbelgium/hassio-addons",
   "slug": "sabnzbd",
   "source": "github",
   "upstream_repo": "linuxserver/docker-sabnzbd",
-  "upstream_version": "5.0.4"
+  "upstream_version": "5.1.0"
 }

scrutiny_fa_original/CHANGELOG.md

@@ -1,4 +1,7 @@
  
+## v0.9.3 (2026-08-13)
+- Update to latest version from analogj/scrutiny (changelog : https://github.com/analogj/scrutiny/releases)
+ 
 ## v0.9.2 (2026-06-20)
 - Update to latest version from analogj/scrutiny (changelog : https://github.com/analogj/scrutiny/releases)
  

scrutiny_fa_original/config.yaml

@@ -45,4 +45,4 @@ schema:
 slug: scrutiny_fa_original
 udev: true
 url: https://github.com/analogj/scrutiny
-version: "v0.9.2"
+version: "v0.9.3"

scrutiny_fa_original/updater.json

@@ -1,10 +1,10 @@
 {
   "github_fulltag": "true",
-  "last_update": "2026-06-20",
+  "last_update": "2026-08-13",
   "paused": false,
   "repository": "alexbelgium/hassio-addons",
   "slug": "scrutiny_fa_original",
   "source": "github",
   "upstream_repo": "analogj/scrutiny",
-  "upstream_version": "v0.9.2"
+  "upstream_version": "v0.9.3"
 }

scrutiny_original/CHANGELOG.md

@@ -1,4 +1,7 @@
  
+## v0.9.3 (2026-08-13)
+- Update to latest version from analogj/scrutiny (changelog : https://github.com/analogj/scrutiny/releases)
+ 
 ## v0.9.2 (2026-06-20)
 - Update to latest version from analogj/scrutiny (changelog : https://github.com/analogj/scrutiny/releases)
  

scrutiny_original/config.yaml

@@ -113,4 +113,4 @@ schema:
 slug: scrutiny_original
 udev: true
 url: https://github.com/analogj/scrutiny
-version: "v0.9.2"
+version: "v0.9.3"

scrutiny_original/updater.json

@@ -1,10 +1,10 @@
 {
   "github_fulltag": "true",
-  "last_update": "2026-06-20",
+  "last_update": "2026-08-13",
   "paused": false,
   "repository": "alexbelgium/hassio-addons",
   "slug": "scrutiny_original",
   "source": "github",
   "upstream_repo": "analogj/scrutiny",
-  "upstream_version": "v0.9.2"
+  "upstream_version": "v0.9.3"
 }

zoneminder/CHANGELOG.md

@@ -1,3 +1,6 @@
+ 
+## 1.38.4 (2026-08-13)
+- Update to latest version from zoneminder-containers/zoneminder-base (changelog : https://github.com/zoneminder-containers/zoneminder-base/releases)
 
 ## 1.38.3 (2026-05-30)
 - Update to latest version from zoneminder-containers/zoneminder-base (changelog : https://github.com/zoneminder-containers/zoneminder-base/releases)

zoneminder/Dockerfile

@@ -16,7 +16,6 @@
 
 ARG BUILD_FROM
 ARG BUILD_VERSION
-ARG BUILD_UPSTREAM="1.38.3"
 FROM tritruongtr/zoneminder:latest
 
 ##################

zoneminder/config.yaml

@@ -95,5 +95,5 @@ services:
 slug: zoneminder
 udev: true
 url: https://github.com/alexbelgium/hassio-addons
-version: "1.38.3"
+version: "1.38.4"
 webui: "[PROTO:ssl]://[HOST]:[PORT:80]/zm"

zoneminder/updater.json

@@ -1,8 +1,8 @@
 {
-  "last_update": "2026-05-30",
+  "last_update": "2026-08-13",
   "repository": "alexbelgium/hassio-addons",
   "slug": "zoneminder",
   "source": "github",
   "upstream_repo": "zoneminder-containers/zoneminder-base",
-  "upstream_version": "1.38.3"
+  "upstream_version": "1.38.4"
 }

zzz_archived_code-server/CHANGELOG.md

@@ -1,4 +1,7 @@
  
+## 4.132.0 (2026-08-13)
+- Update to latest version from linuxserver/docker-code-server (changelog : https://github.com/linuxserver/docker-code-server/releases)
+ 
 ## 4.131.0 (2026-08-01)
 - Update to latest version from linuxserver/docker-code-server (changelog : https://github.com/linuxserver/docker-code-server/releases)
  

zzz_archived_code-server/config.yaml

@@ -101,5 +101,5 @@ schema:
 slug: code-server
 udev: true
 url: https://github.com/alexbelgium/hassio-addons/tree/master/coder-server
-version: "4.131.0"
+version: "4.132.0"
 webui: "[PROTO:ssl]://[HOST]:[PORT:8443]"

zzz_archived_code-server/updater.json

@@ -1,8 +1,8 @@
 {
-  "last_update": "2026-08-01",
+  "last_update": "2026-08-13",
   "repository": "alexbelgium/hassio-addons",
   "slug": "code-server",
   "source": "github",
   "upstream_repo": "linuxserver/docker-code-server",
-  "upstream_version": "4.131.0"
+  "upstream_version": "4.132.0"
 }