skill(hassio-addon-workflow): deduplicate, route traps.md by section, fix preflight path (#3057)

* skill(hassio-addon-workflow): deduplicate, route traps.md by section, fix preflight path

Reviewed the skill against Anthropic's skill-authoring guidance (progressive
disclosure, single ownership of each rule, explain the why rather than issue
rigid rules) with a second, independent pass from Codex (gpt-5.6-sol).

Real defect fixed: preflight.sh defaulted its repo argument to the hardcoded
/data/claude/hassio-addons, so when run from a worktree it inspected the main
checkout and reported that branch — the exact stale-checkout trap the script
exists to catch. It now defaults to `git rev-parse --show-toplevel`.

Deduplicated, one owner each:
- measurement methodology: evidence.md owns it; traps.md's Measurement section
  is gone (its rtk note moved to Environment and workspace)
- defensive-branch reachability: the standing rule owns it; step 3 points back
- subagent delegation: SKILL.md's delegation note owns it; codex-review.md points
- review-ratchet handling: SKILL.md step 6 owns it, absorbing codex-review.md's
  "this is wrong" vs "this is undefended" split
- post-merge revert mechanics: traps.md owns them; step 9 states the check only
- simplify checklist: step 5 owns the questions; simplify.md keeps the cases
- version format: CLAUDE.md owns it; traps.md keeps only what it does not say

Corrections found by review and verified against the workflows and scripts:
- Super-Linter runs on every PR (lint.yml `pull_request`), not weekly; it is
  continue-on-error at both call sites, which is the part that matters
- the three hard gates are matrixed over changed add-ons, so they skip rather
  than pass on a PR touching no top-level config.*
- `--sandbox read-only` blocks writes, not reads or command execution; Codex
  can and does fall back to fetching the repo from GitHub
- env_trace.sh's process argument is optional; pr_review.sh's reply and resolve
  take more than a PR number

Also: step 4 now routes to the traps.md section by anchor instead of asking for
the whole ~290-line file, and step 5 gains a Depth check (fix the shared
mechanism once more than one add-on hits it) adapted from the built-in
/simplify skill's altitude pass.

No new markdownlint findings; shellcheck clean; preflight.sh verified reporting
this worktree.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

* skill(hassio-addon-workflow): make step 4's traps.md routing actually save the tokens

The routing table added in the previous commit was advisory only: a markdown
anchor cannot be loaded on its own, so an agent told to read
references/traps.md#shell-and-bashio reads the file and pays for all 18 KB.

Measured overpay per edit, against what each section actually needs:
  shell / bashio            642 B needed, 18,070 B paid  (28x)
  Dockerfile / arch       2,655 B needed, 18,070 B paid  (7x)
  base-image env option   3,070 B needed, 18,070 B paid  (6x)
"CI and review bots" is 6,302 B of that — 35% of the file — and is needed at
steps 7-8, never at step 4.

scripts/traps.sh prints one section. Scripts are run rather than read, so the
helper itself costs no prompt tokens and the table now buys what it claims.
Kept traps.md whole rather than splitting it into six files: the split would
save the same bytes but fragments a file with a working table of contents and
breaks the references/traps.md#anchor cross-references that steps 5, 7 and 9
still use.

Ambiguous or unmatched keywords list the sections and exit non-zero rather than
silently printing the wrong one. Verified: every keyword in the step 4 table
resolves to exactly one section, headings containing '/' work, and the last
section reaches EOF. shellcheck clean; no new markdownlint findings.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

* skill(hassio-addon-workflow): fix review findings — PATH form, preflight fallback, config.json claim

All three reproduced before accepting.

Step 4's routing table used a bare `traps.sh <keyword>`, which is not on PATH:
every row failed with "traps.sh: command not found" from the repo root. Flagged
independently by Codex, Copilot and CodeRabbit. Now uses the
`bash "$SKILL/scripts/traps.sh"` form already established above it; all five
keywords verified to run and resolve to exactly one section.

preflight.sh fell back to the hardcoded /data/claude/hassio-addons when
`git rev-parse` could not answer, recreating the stale-checkout bug this commit
series set out to fix — and worse than CodeRabbit described: from a non-git
directory it reported an unrelated branch of the main checkout as though it were
the caller's own. It now refuses and asks for an explicit path (exit 1).
Explicit-argument and in-worktree behaviour unchanged, both re-verified.

Codex correctly noted the description advertised config.json while preflight.sh
and validate.sh parse only config.yaml. Exactly one add-on uses config.json
(zzz_archived_tor, archived) against 136 using config.yaml, so the proportionate
fix is Codex's own alternative — narrow the description — rather than teaching
two scripts JSON for an archived add-on. config.json dropped from the
description.

shellcheck clean; no new markdownlint findings.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

---------

Co-authored-by: BirdNET-Go Addon Builder <addon-builder@users.noreply.github.com>
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>

.claude/skills/hassio-addon-workflow/SKILL.md

@@ -4,29 +4,30 @@ description: >-
   Workflow for alexbelgium/hassio-addons Home Assistant add-on work: diagnose with real
   measurements, independent Codex review, implement, open a PR, resolve CodeRabbit / Copilot /
   Codex bot review comments, verify in production. Use for any task touching an add-on in this
-  repo — bugs, RAM/CPU/performance tuning, Dockerfile, config.yaml, cont-init.d or s6 changes,
+  repo — bugs, RAM/CPU/performance tuning, Dockerfile, config.yaml, build.json,
-  version bumps, opening or iterating PRs — and when asked to "check with codex", "verify with
+  updater.json, cont-init.d, services.d or s6 changes, version and CHANGELOG bumps, a failing
-  chatgpt", or resolve bot comments. Cheap for small asks: a light path skips the heavy steps.
+  add-on CI check, opening or iterating PRs — and, on an add-on task, when asked to "check with
+  codex", "verify with chatgpt", or resolve bot comments. Cheap for small asks: a light path skips
+  the heavy steps.
 ---
 
 # Home Assistant add-on workflow
 
-**Answer style.** Chat replies are terse: no pleasantries, no tool-call narration, no decorative
+**Answer style.** Chat replies are terse — no pleasantries, tool-call narration, decorative tables,
-tables or emoji, no dumped logs — quote the shortest decisive line, and don't re-read or re-print
+emoji or dumped logs; quote the shortest decisive line and don't re-print what is already in
-what is already in context. Fragments and dropped articles are fine. Never compressed: uncertainty
+context. Telegraphic fragments are fine *there*. Two things outrank brevity, because dropping a
-markers ("likely", "assumed", "not verified"), negations (`not`/`never`/`no`/`only`), numbers,
+word from either changes the meaning rather than shortening it: never compress uncertainty markers
-units, technical terms, code blocks, error strings — step 9's Verified/Checked/Assumed distinction
+("likely", "assumed", "not verified"), negations, numbers, units, technical terms, code or error
-outranks brevity every time. Write in full prose, not fragments, for security warnings,
+strings — step 9's Verified/Checked/Assumed distinction wins every time; and write full prose
-irreversible-action confirmations, and any multi-step sequence a fragment could make ambiguous.
+wherever a fragment could be read two ways — security warnings, irreversible-action confirmations,
-Persisted text is prose too: commits, CHANGELOG entries, PR bodies, review-thread replies, the
+multi-step sequences, and everything persisted (commits, CHANGELOG entries, PR bodies, review-thread
-step 10 report.
+replies, the step 10 report).
 
 Triage first, then one of two paths:
 
 - **Light** — typo/doc fixes, CHANGELOG edits, version bumps, one-file edits at ladder levels
-  1-3 (below), simple questions: scope → implement → validate (`$SKILL/scripts/validate.sh
+  1-3 (below), simple questions: scope → implement → validate (step 4) → PR (version bump +
-  <addon> --vs-master`; `$SKILL` defined below) → PR (version bump + CHANGELOG still required) →
+  CHANGELOG still required) → resolve bot comments.
-  resolve bot comments.
 - **Full loop** — performance/RAM/CPU work, diagnosis, anything changing a shipped default,
   ladder levels 4-6, or an explicit Codex-check request: scope → measure → plan → Codex reviews
   the plan → implement → simplify → Codex reviews the code → **simplify again** → PR → resolve
@@ -47,9 +48,8 @@ reasoning about a hypothetical *host* either. A defensive branch is complexity l
 the input that reaches it and the image or host where that happens, or delete it and let the case
 fail visibly instead.
 
-**Repo layout.** `alexbelgium/hassio-addons`; each add-on is a top-level directory. This skill is
+**Skill root.** The canonical copy lives at `.claude/skills/hassio-addon-workflow/`. Set it once;
-checked in at `.claude/skills/hassio-addon-workflow/` (canonical copy). Set the skill root once,
+every `scripts/…` and `references/…` path below is relative to it:
-then every `scripts/…` and `references/…` path below is relative to it:
 
 ```bash
 SKILL="$(git rev-parse --show-toplevel)/.claude/skills/hassio-addon-workflow"
@@ -63,9 +63,10 @@ bash "$SKILL/scripts/preflight.sh"        # and likewise for the other scripts
 
 **Delegate heavy output to a subagent.** Codex reviews and multi-thread PR triage produce output
 you don't need verbatim in your own context. For Codex's plan review (step 3), Codex's code
-review (step 6), and PR-comment listing when there are more than ~5 threads (step 8): launch a
+review (step 6), and PR-comment listing when there are more than ~5 threads (step 8): if subagents
-subagent to run the command and report back only the objections/findings and your assessment of
+are available, launch one to run the command and report back only the objections/findings and your
-each, not the raw transcript.
+assessment of each, not the raw transcript. Otherwise redirect the output to a file and read the
+parts you need.
 
 ---
 
@@ -85,9 +86,11 @@ Measure the running add-on rather than reasoning from source (`$BUILD_VERSION` s
 - Is this flag/driver/package actually present? → inspect the artifact: `/proc/<pid>/cmdline`,
   `command -v`, `/var/log/apt/history.log`
 
-Verify you're reading the right revision first — `scripts/preflight.sh` catches a stale branch
+Verify you're reading the right revision first — `scripts/preflight.sh` compares the checkout
-before it costs a full analysis pass. Measurement methodology, gotchas, and real failure examples:
+against the running `$BUILD_VERSION`, which catches the usual stale branch before it costs a full
-`references/evidence.md`.
+analysis pass (a version match does not prove the source is identical). Read
+`references/evidence.md` before interpreting any number you did not get straight from
+`measure.sh`, and for the failure modes this step exists to prevent.
 
 ## 3. Plan — choose the mechanism level, then Codex reviews it (full loop)
 
@@ -117,45 +120,60 @@ Attack your own plan before implementing:
 - What am I **inferring** that I could instead **detect at runtime** or **record explicitly**?
   Highest-yield question here — see `references/evidence.md`'s failure-mode section.
 - For every branch that exists **only to survive something going wrong**: name the image or host
-  where that input actually arrives, and go and look. Naming is the bar, not reproducing it here —
+  where that input arrives (the standing rule above) and go and look, before you write it.
-  `references/simplify.md` works the `/dev/shm` guard and the `s6-dumpenv` fallback through that
-  distinction.
 
-Full loop only, before writing code: get Codex's independent read on the plan. Spawn a subagent
+Full loop only, before writing code: get Codex's independent read on the plan, delegated as above —
-whose prompt includes the path `references/codex-review.md` and tells it to follow that file's
+`references/codex-review.md` has the invocation and how to write the prompt.
-invocation, then report back only Codex's objections and an assessment of each — not the raw
-transcript.
 
 ## 4. Implement
 
-Touching a shell script, Dockerfile, or env option? Read `references/traps.md` first — skim the
+Read the `references/traps.md` section matching what you're about to touch. It is ~18 KB and all
-headings, read the sections you're about to touch; the bashio, s6-env, arch-guard and versioning
+but one section is irrelevant to any given edit, so print the one you need rather than reading the
-traps are all live. (The light-path facts it holds — versioning format, CHANGELOG heading — are
+file — run it with no argument to list the sections:
-already inline in step 7.) Validate with `scripts/validate.sh <addon> --vs-master`. Write
+
-behavioural tests for anything with branches, targeting **the regression a reviewer described**,
+| Touching | Run |
-not just the happy path.
+| --- | --- |
+| an option or anything a base-image service reads | `bash "$SKILL/scripts/traps.sh" passing` |
+| a file the app also writes itself | `bash "$SKILL/scripts/traps.sh" "app's own"` |
+| shell, bashio, a symlinked script | `bash "$SKILL/scripts/traps.sh" bashio` |
+| `Dockerfile`, `build.json`, an arch guard | `bash "$SKILL/scripts/traps.sh" dockerfile` |
+| Chromium, Electron, Xvfb | `bash "$SKILL/scripts/traps.sh" chromium` |
+
+Then validate with `scripts/validate.sh <addon> --vs-master`, and write behavioural tests for
+anything with branches, targeting **the regression a reviewer described**, not just the happy
+path.
 
 ## 5. Simplify
 
-Before requesting review, check: did the diff stay at the ladder level chosen in step 3? Can this
+Six questions over your own diff, before anyone else reads it:
-be solved by deleting instead of adding? Is the fix bigger than what it fixes? How does it fail in
+
-three years? And on reuse: does any hunk reimplement something `.templates/`, another script in
+- **Level** — did the diff stay at the ladder level chosen in step 3, or creep up one?
-this add-on, or a sibling add-on already does — and if a future add-on hits this same problem,
+- **Deletion** — can this be solved by deleting instead of adding?
-will it find one way to solve it or two? Fold a near-duplicate into the existing mechanism, or
+- **Size** — is the fix bigger than the thing it fixes?
-justify the divergence in the PR body — but never at the cost of an isolation rule
+- **Reuse** — does any hunk reimplement what `.templates/`, another script in this add-on, or a
-`references/traps.md` documents: scripts shared by symlink with the webtop add-ons take a new
+  sibling add-on already does? If a future add-on hits this problem, will it find one way to solve
-numbered script, not an edit. Case studies of what happens when this check is skipped:
+  it or two? Fold near-duplicates in, or justify the divergence in the PR body.
-`references/simplify.md`.
+- **Depth** — is this a special case bolted onto shared infrastructure? Fix the shared mechanism
+  instead once more than one add-on hits it; generalising from a single case is how bespoke
+  designs get built, so below that bar the special case is the right call.
+- **Longevity** — how does this fail in three years, when the base image or upstream has moved?
+
+The standing exception to Reuse and Depth: scripts shared by symlink with the webtop add-ons take a
+new numbered script, never an edit (`references/traps.md#shell-and-bashio`). Case studies for the rest, including
+what shipped when this pass was skipped: `references/simplify.md`.
 
 ## 6. Codex attacks the code, then simplify what the review added (full loop only)
 
 Same delegated invocation, pointed at `git diff origin/master...HEAD` plus your reasoning per
 hunk. Details in `references/codex-review.md`.
 
-Then run step 5's checks again over the hunks the review changed. Adversarial review only ever
+Then run step 5's checks again over the hunks the review changed. Adversarial review mostly argues
-argues *for* another branch — that is its job — so accepting objections ratchets the diff upward,
+*for* another branch — that is what it is asked to do — so accepting objections tends to ratchet
-and nothing else in the loop walks it back down. For each accepted objection: is the case it
+the diff upward, and nothing else in the loop walks it back down. Sort each objection before you
-defends one you have now demonstrated, or one you have merely been told about? Taking a
+write anything:
+**"this is wrong"** is a bug and you fix it; **"this is undefended"** is a claim about some host,
+and it needs the same demonstration you would demand of a measurement — is the case it defends one
+you have now demonstrated, or one you have merely been told about? Taking a
 correctness objection often deletes the code that made it necessary, and a fix that collapses back
 to fewer lines than you started the review with is the normal outcome, not a suspicious one.
 
@@ -165,20 +183,23 @@ kind of edit that leaves a stray `fi` behind.
 
 ## 7. Open the PR
 
-CI gates on a PR: **`CHANGELOG.md` updated** (hard fail), the **HA add-on linter**
+Three hard gates — **`CHANGELOG.md` updated**, the **HA add-on linter**
-(`frenck/action-addon-linter`, blocking — not the weekly Super-Linter, which is non-blocking), and
+(`frenck/action-addon-linter`), and the **add-on image build** — but only on a PR that changes a
-the **add-on image build**. Bump `version` anyway (`X.Y.Z.N`, never `X.Y.Z-N`, see
+top-level `config.*`. On a PR that doesn't (docs, `.github/`, `.claude/`) they *skip*, which is not
-`references/traps.md#versioning`) — Supervisor won't offer a rebuild without it. Update
+the same as passing. Super-Linter runs on every PR and is `continue-on-error`, so it never blocks;
-`README.md` if you added options; write the CHANGELOG heading as `## <version> (<date>)`,
+fix its real findings anyway. Nothing checks the version bump, so bump it yourself — Supervisor
-matching the date format already in that file — almost always ISO `YYYY-MM-DD`, see
+won't offer a rebuild without one, and `CLAUDE.md` has the format. Update `README.md` if you added
-`references/traps.md#ci-and-review-bots`.
+options; write the CHANGELOG heading as `## <version> (<date>)`, matching the date format already
+in that file — almost always ISO `YYYY-MM-DD`, see `references/traps.md#ci-and-review-bots`.
 
 Write the body to a file, `gh pr create --body-file`: state what was measured, what changed,
 **what is not verified**, and how to roll back the riskiest hunk alone.
 
 ## 8. Resolve review comments
 
-`scripts/pr_review.sh list|reply|resolve|status|watch <PR>`. For every comment, **reproduce the
+`scripts/pr_review.sh list|status|watch <PR>` to read, `reply <PR> <COMMENT_ID> <text|@file>` and
+`resolve <PR> <THREAD_ID…|--all>` to answer; run it with no arguments for the full usage. For every
+comment, **reproduce the
 claim before agreeing or disagreeing** — reviewers are frequently right and occasionally
 confidently wrong; a reproduction takes a minute and decides it either way. Reply with the
 evidence, then resolve. **Push back when you're right**, on the thread — a resolved-but-wrong
@@ -192,13 +213,12 @@ work" — either it was exercised, or say plainly it wasn't.
 
 Light path: verification is `validate.sh` plus CI; anything beyond that is Assumed. Full loop: CI
 passing proves the build works, not that the change does anything — re-run the measurement that
-motivated the work once the rebuilt add-on is running. After merge, `git fetch origin master`
+motivated the work once the rebuilt add-on is running. Real "merged and inert" examples, and what
-(the tracking ref is stale otherwise), then confirm the *changes* survived — `git diff
+to do when a fix cannot be self-verified: `references/evidence.md`. Then confirm the change
-origin/master -- <the paths you touched>` comes back empty. Ancestry is not the check: a revert
+survived the merge: `git fetch origin master` first (the tracking ref is stale otherwise), then
-leaves your commit in history and undoes its tree, so `--contains` reports success either way. The
+`git diff origin/master -- <the paths you touched>` must come back empty. Ancestry is not the
-builder's revert-on-failure job can revert a merge for reasons unrelated to your diff (see
+check, and the builder reverts merges for reasons unrelated to your diff — both explained in
-`references/traps.md#ci-and-review-bots`). Real "merged and inert" examples, and what
+`references/traps.md#ci-and-review-bots`.
-to do when a fix can't be self-verified: `references/evidence.md`.
 
 ## 10. Calibrate and report
 

.claude/skills/hassio-addon-workflow/references/codex-review.md

@@ -2,9 +2,7 @@
 
 Used for step 3 (plan review) and step 6 (code review), full loop only. Codex is a genuinely
 different model reading the files itself; on this workload it has repeatedly been worth the
-minutes. Delegate the invocation to a subagent (see SKILL.md's subagent-delegation note) so its
+minutes. Run it through a subagent, per SKILL.md's delegation note.
-output doesn't land verbatim in your context — have the subagent return only Codex's objections
-and your assessment of each.
 
 ## Invocation
 
@@ -12,11 +10,12 @@ and your assessment of each.
 on ~4 KB prompts (2026-08-03); the CLI with the same content succeeded. The MCP tool is still fine
 for short questions.
 
-`--sandbox read-only` lets Codex read files but blocks writes and command execution, and
+`--sandbox read-only` blocks writes, not reads, and `approval_policy=never` stops it asking for
-`approval_policy=never` means it will not be prompted for permission to run anything either — so
+permission rather than stopping it acting — so it can still run read-only commands and often
-paste every number into the prompt rather than expecting Codex to gather it. `- <` feeds the
+falls back to fetching the repo from GitHub instead of reading your worktree. Paste every number
-prompt file on stdin. Run it in the background so you are not blocked for the several minutes it
+into the prompt rather than expecting it to gather them, and treat what it reports about *local*
-takes (`&` here, or your harness's background-task mechanism):
+state as unverified. `- <` feeds the prompt file on stdin. Run it in the background so you are not
+blocked for the several minutes it takes (`&` here, or your harness's background-task mechanism):
 
 ```bash
 codex exec --model gpt-5.6-sol --sandbox read-only --skip-git-repo-check \
@@ -40,9 +39,5 @@ codex exec --model gpt-5.6-sol --sandbox read-only --skip-git-repo-check \
 confidently, and separately caught a genuine methodology error in the same review. Treat its
 confirmations with the same scepticism as its objections — especially about the build.
 
-**Its objections ratchet complexity upward.** An adversarial reviewer is asked to find what could
+**Its objections only ever argue for more code** — it is asked what could go wrong, never whether
-go wrong, so its output is a list of arguments for more code; it is never asked whether the branch
+the branch it wants is reachable. Sort them before writing anything; SKILL.md step 6 is that pass.
-it wants is reachable. Separate "this is wrong" from "this is undefended" before you write
-anything: the first is a bug and you fix it, the second is a claim about some host, and it needs
-the same demonstration you would demand of a measurement. That is what step 6's second simplify
-pass is for.

.claude/skills/hassio-addon-workflow/references/evidence.md

@@ -1,16 +1,24 @@
 # Evidence — measurement methodology and case studies
 
-## Why summed RSS and reserved-vs-resident both matter
+## How to read the numbers
 
-- **Summed RSS double-counts shared pages.** Removing a duplicate process frees its *private*
+**Summed RSS overstates savings.** Shared library pages are counted once per process, so removing
-  memory, not its RSS. `scripts/measure.sh` reports PSS and private alongside RSS — quote
+a duplicate frees its *private* memory, not its RSS. Measured example: four MCP shims summed to
-  **private** when arguing "removing this saves N MB".
+882 MB RSS but 643 MB PSS / 564 MB private, and per-process private ranged 54 MB down to 2 MB —
-- **A big mapping is not necessarily resident.** Large SysV/tmpfs segments are lazily populated;
+which completely changes which duplicate is worth removing. Quote private when arguing "removing
-  reserved size is reported separately from resident for this reason.
+this saves N MB".
-- `/proc/meminfo` and `free` show **host** figures (no memory cgroup namespace here) — never
+
-  attribute those to the add-on.
+**A large mapping is often not resident.** SysV/tmpfs segments are lazily populated. Xvfb's
-- Sample duration matters: a 3 s CPU sample measured 2.3% where a 20 s sample measured 21.6% for
+506 MB framebuffer shows `Rss: 0` in `/proc/<pid>/smaps`. Check before calling anything a leak.
-  the same process. Use ≥20 s for anything you report.
+
+**`/proc/meminfo` and `free` show host figures** — there is no memory cgroup namespace here.
+Never attribute those totals to the add-on.
+
+**A short CPU sample is not a CPU measurement.** A 3 s sample measured 2.3% where a 20 s sample
+measured 21.6% for the same process. Use >= 20 s for anything you report.
+
+`scripts/measure.sh` already reports PSS and private alongside RSS, and resident separately from
+reserved, so these three only bite when you compute a figure yourself or quote one from `ps`.
 
 ## Before asserting anything, ask what would show it false
 

.claude/skills/hassio-addon-workflow/references/simplify.md

@@ -30,28 +30,24 @@ Being able to build the complicated thing is not a reason to.
   It took the maintainer asking "is this the simplest way possible?" to run the pass that step 6
   now requires.
 
-## Checks worth running against your own diff
+## Where SKILL.md step 5's questions get hard
 
-- **Did the diff stay at the ladder level chosen in step 3?** If it crept up a level, either
+**Deletion is not automatically the safe direction.** The `/dev/shm` case in `evidence.md` is a
-  justify that out loud or redo it at the level you chose.
+removal that reintroduced a crash loop on hosts unlike this one. A removal that depends on a host
-- **Can this be solved by deleting instead of adding?** A flag that shouldn't be passed, a
+default needs the same verification as an addition.
-  process that shouldn't start, a registration that shouldn't be duplicated. Deleting usually
+
-  shrinks the regression surface — but not always: the `/dev/shm` case in
+**Naming the case is the bar for a defensive branch, not reproducing it.** Docker's 64 MB
-  `references/evidence.md` is a removal that reintroduced a crash loop on hosts unlike this one.
+`/dev/shm` default is documented behaviour that Home Assistant does not override, so that guard
-  A removal that depends on a host default still needs the same verification as an addition.
+stays even though this host measured 7.7 GB. Nobody could name a single image shipping
-- **Is the fix bigger than the thing it fixes?** That is a smell, not a rule — but it usually
+`with-contenv` without `s6-dumpenv`, so that fallback went. If you cannot name the case, delete the
-  means the problem was framed one level too deep.
+branch: the situation then fails the way it already fails today, visibly, instead of through a
-- **For each defensive branch: what input reaches it, on which image or host?** Go and check,
+second path that is never exercised and silently rots as the base images move. Weigh the cost both
-  the way you would check a measurement. The bar is being able to **name** the case, not to
+ways — a one-flag guard against a crash you cannot rule out is cheap; a second code path that
-  reproduce it here: Docker's 64 MB `/dev/shm` default is documented behaviour that HA does not
+degrades to the pre-fix behaviour anyway is not. Write in the PR body what you cut and why, so the
-  override, so the bullet above keeps that guard even though this host measured 7.7 GB. Nobody
+next person does not re-add it from the same reasoning.
-  could name a single image shipping `with-contenv` without `s6-dumpenv`, so that fallback went.
+
-  If you cannot name the case, delete the branch — the situation then fails the way it already
+**"Bigger than the thing it fixes" is a smell, not a rule** — but it usually means the problem was
-  fails today, visibly, instead of through a second path that is never exercised and silently
+framed one level too deep.
-  rots as the base images move. Weigh the cost too: a one-flag guard against a crash you cannot
+
-  rule out is cheap, a second code path that degrades to the pre-fix behaviour anyway is not.
+**Three-year failure** favours code that reads a documented knob. Code that reaches into private
-  Write down in the PR body what you cut and why, so the next person does not re-add it from the
+internals does not survive the base image moving.
-  same reasoning.
-- **How does this fail in three years**, when the base image, Electron, or upstream has moved?
-  Code that reads a documented knob keeps working. Code that reaches into private internals
-  does not.

.claude/skills/hassio-addon-workflow/references/traps.md

@@ -9,7 +9,6 @@ workflows and lint rules — that is not repeated here.
 ## Contents
 
 - [Environment and workspace](#environment-and-workspace)
-- [Measurement](#measurement)
 - [Passing values into base-image services](#passing-values-into-base-image-services)
 - [Writing into an app's own config](#writing-into-an-apps-own-config)
 - [Shell and bashio](#shell-and-bashio)
@@ -46,20 +45,6 @@ gate. One observed run took ~3 hours, with 20+ runs queued against 2 executing
 runner contention, not the diff. Check `gh run list` before concluding your PR is stuck. Poll in
 a background task, and never claim the build is verified when it hasn't run.
 
-## Measurement
-
-**Summed RSS overstates savings.** Shared library pages are counted once per process, so removing
-a duplicate frees its *private* memory, not its RSS. Measured example: four MCP shims summed to
-882 MB RSS but 643 MB PSS / 564 MB private, and per-process private ranged 54 MB down to 2 MB —
-which completely changes which duplicate is worth removing. Quote private when arguing "removing
-this saves N MB".
-
-**A large mapping is often not resident.** SysV/tmpfs segments are lazily populated. Xvfb's
-506 MB framebuffer shows `Rss: 0` in `/proc/<pid>/smaps`. Check before calling anything a leak.
-
-**`/proc/meminfo` and `free` show host figures** — there is no memory cgroup namespace here.
-Never attribute those totals to the add-on.
-
 **`rtk` filters some command output.** For a complete listing, redirect to a file and read that
 (`ps ... > $SP/ps.txt`), or use `rtk proxy <cmd>`.
 
@@ -190,11 +175,9 @@ build.
 
 ## Versioning
 
-**`X.Y.Z.N`, never `X.Y.Z-N`.** A hyphen parses as a semver pre-release, which Supervisor treats
+`CLAUDE.md` owns the format (`X.Y.Z.N`, never `X.Y.Z-N`, and why). The one thing it does not say:
-as *older* than `X.Y.Z` — the update is never offered.
+date-based versions (`2026.08.03`) are common here, so check whether master has already moved to
-
+the version you were about to use before you pick it.
-Date-based versions (`2026.08.03`) are common here. Check whether master has already moved to the
-version you were about to use.
 
 ## Chromium / Electron under Xvfb
 

.claude/skills/hassio-addon-workflow/scripts/env_trace.sh

@@ -30,14 +30,8 @@ VAR="${1:?usage: env_trace.sh <VAR> [process-name-or-pid]}"
 TARGET="${2:-}"
 # VAR is interpolated into grep/sed patterns below — restrict it to a valid env var name
 case "$VAR" in
-    [A-Za-z_]*) [ -z "${VAR//[A-Za-z0-9_]/}" ] || {
+    [A-Za-z_]*) [ -z "${VAR//[A-Za-z0-9_]/}" ] || { echo "invalid env var name: $VAR" >&2; exit 1; } ;;
-        echo "invalid env var name: $VAR" >&2
+    *) echo "invalid env var name: $VAR" >&2; exit 1 ;;
-        exit 1
-    } ;;
-    *)
-        echo "invalid env var name: $VAR" >&2
-        exit 1
-        ;;
 esac
 
 echo "== tracing ${VAR} =="
@@ -45,7 +39,7 @@ echo
 
 echo "1. /data/options.json (the user's saved options)"
 if [ -f /data/options.json ]; then
-    python3 - "$VAR" << 'PY'
+    python3 - "$VAR" <<'PY'
 import json, sys
 var = sys.argv[1]
 try:
@@ -86,8 +80,7 @@ echo "3. s6 container_environment (only read by services using #!/usr/bin/with-c
 seen3=0
 for d in /var/run/s6/container_environment /run/s6/container_environment; do
     if [ -f "$d/$VAR" ]; then
-        echo "   $d/$VAR = [$(cat "$d/$VAR")]"
+        echo "   $d/$VAR = [$(cat "$d/$VAR")]"; seen3=1
-        seen3=1
     fi
 done
 [ "$seen3" -eq 0 ] && echo "   not present in either envdir"
@@ -129,8 +122,8 @@ else
                 done
             fi
             # What it was actually launched with beats any theory about its environment.
-            tr '\0' '\n' < "/proc/$pid/cmdline" 2> /dev/null | tail -n +2 \
+            tr '\0' '\n' < "/proc/$pid/cmdline" 2> /dev/null | tail -n +2 |
-                | grep -iE "res|screen|${VAR}" | head -3 | sed 's/^/     argv: /'
+                grep -iE "res|screen|${VAR}" | head -3 | sed 's/^/     argv: /'
         done
     fi
 fi

.claude/skills/hassio-addon-workflow/scripts/measure.sh

@@ -31,7 +31,7 @@ awk '{t+=$2} END{printf "  threads=%d\n", t}' <(ps -eo pid,nlwp --no-headers 2>
 echo
 echo "== per-process memory (top 20 by PSS) =="
 printf '  %-28s %8s %8s %8s\n' COMMAND RSS PSS PRIVATE
-python3 - "$OUT" << 'PY'
+python3 - "$OUT" <<'PY'
 import os, sys
 rows = []
 for pid in filter(str.isdigit, os.listdir('/proc')):
@@ -62,17 +62,17 @@ PY
 
 echo
 echo "== reserved-but-not-resident (lazy allocations, NOT leaks) =="
-ipcs -m 2> /dev/null | awk 'NR>3 && $5 ~ /^[0-9]+$/ && $5 > 50000000 {printf "  SysV shm %.0f MB (owner %s) — check Rss in /proc/<pid>/smaps before calling it used\n", $5/1048576, $3}'
+ipcs -m 2>/dev/null | awk 'NR>3 && $5 ~ /^[0-9]+$/ && $5 > 50000000 {printf "  SysV shm %.0f MB (owner %s) — check Rss in /proc/<pid>/smaps before calling it used\n", $5/1048576, $3}'
 
 echo
 echo "== CPU over ${SAMPLE}s (idle unless you are driving the UI) =="
 # utime+stime. Parsed after the LAST ')' because field 2 is (comm) and may contain spaces —
 # a plain $14+$15 is wrong for anything like 'npm exec @foo' and silently reports a fabricated
 # number rather than failing.
-jiffies() { awk -F') ' '{n=split($NF,a," "); print a[12]+a[13]}' "/proc/$1/stat" 2> /dev/null; }
+jiffies() { awk -F') ' '{n=split($NF,a," "); print a[12]+a[13]}' "/proc/$1/stat" 2>/dev/null; }
 
 # jiffies are USER_HZ units — almost always 100, but read it rather than assume it
-HZ=$(getconf CLK_TCK 2> /dev/null) && [ "$HZ" -gt 0 ] 2> /dev/null || HZ=100
+HZ=$(getconf CLK_TCK 2>/dev/null) && [ "$HZ" -gt 0 ] 2>/dev/null || HZ=100
 
 # Sample EVERY readable process, not the top-N of ps.txt: that list is sorted by RSS,
 # and the busiest process is not necessarily a big one.
@@ -86,14 +86,14 @@ for pid in "${!t0[@]}"; do
     [ -r "/proc/$pid/stat" ] || continue
     t1=$(jiffies "$pid") || continue
     [ -n "$t1" ] && [ -n "${t0[$pid]}" ] || continue
-    delta=$((t1 - ${t0[$pid]}))
+    delta=$(( t1 - ${t0[$pid]} ))
     [ "$delta" -gt 0 ] || continue
     pct=$(awk -v d="$delta" -v s="$SAMPLE" -v hz="$HZ" 'BEGIN{printf "%.2f", d*100/(hz*s)}')
-    comm=$(tr -d '\0' < "/proc/$pid/comm" 2> /dev/null)
+    comm=$(tr -d '\0' < "/proc/$pid/comm" 2>/dev/null)
     echo "$pct $pid $comm"
 done | sort -rn | head -12 | awk '{printf "  %6s%%  %-8s %s\n", $1, $2, $3}'
 
 echo
-echo "  established conns on :8082/:3000/:3001 = $(ss -tn 2> /dev/null | grep -cE 'ESTAB.*:(8082|3000|3001)')"
+echo "  established conns on :8082/:3000/:3001 = $(ss -tn 2>/dev/null | grep -cE 'ESTAB.*:(8082|3000|3001)')"
 echo "  (those are claude_desktop/webtop viewer ports; 0 here means CPU above is idle burn)"
 echo "  raw ps: $OUT/ps.txt"

.claude/skills/hassio-addon-workflow/scripts/preflight.sh

@@ -5,7 +5,14 @@
 # Usage: preflight.sh [repo-path] [addon-slug]
 set -uo pipefail
 
-REPO="${1:-/data/claude/hassio-addons}"
+# Default to the checkout this is run from, never a fixed path: a fixed path silently inspected
+# the main checkout while the caller worked in a worktree, reporting a branch nobody was editing —
+# the exact stale-checkout trap this script exists to catch. Falling back to one when git cannot
+# answer would recreate it, so refuse instead and make the caller say which repo they mean.
+REPO="${1:-}"
+if [ -z "$REPO" ]; then
+    REPO=$(git rev-parse --show-toplevel 2> /dev/null) || REPO=""
+fi
 SLUG="${2:-}"
 
 echo "== tools =="
@@ -26,9 +33,14 @@ fi
 echo
 echo "== repo =="
 # git-aware check: in a worktree .git is a file, not a directory
+if [ -z "$REPO" ]; then
+    echo "  not inside a git checkout, and no repo path given"
+    echo "  -> pass one explicitly: preflight.sh <repo-path> [addon-slug]"
+    exit 1
+fi
 if ! git -C "$REPO" rev-parse --git-dir > /dev/null 2>&1; then
     echo "  no git repo at $REPO"
-    exit 0
+    exit 1
 fi
 cd "$REPO" || exit 0
 branch=$(git branch --show-current 2> /dev/null || echo "(detached)")
@@ -47,10 +59,7 @@ if [ -n "${BUILD_VERSION:-}" ]; then
     if [ -z "$SLUG" ] && [ -n "${HOSTNAME:-}" ]; then
         base=$(printf '%s' "$HOSTNAME" | sed 's/^[0-9a-f]\{8\}-//')
         for cand in "$(printf '%s' "$base" | tr '-' '_')" "$base"; do
-            [ -f "$REPO/$cand/config.yaml" ] && {
+            [ -f "$REPO/$cand/config.yaml" ] && { SLUG="$cand"; break; }
-                SLUG="$cand"
-                break
-            }
         done
         [ -z "$SLUG" ] && SLUG="$base"
     fi
@@ -72,8 +81,8 @@ if [ -n "${BUILD_VERSION:-}" ]; then
         else
             echo "  MISMATCH — this branch is NOT what is running."
             git fetch origin master --quiet 2> /dev/null
-            master=$(git show origin/master:"$SLUG/config.yaml" 2> /dev/null \
+            master=$(git show origin/master:"$SLUG/config.yaml" 2> /dev/null |
-                | grep -E '^version:' | head -1 | tr -d "\"'" | awk '{print $2}')
+                grep -E '^version:' | head -1 | tr -d "\"'" | awk '{print $2}')
             echo "  origin/master version = ${master:-unknown}"
             echo "  -> work from origin/master; analysing this branch will mislead you."
             echo

.claude/skills/hassio-addon-workflow/scripts/traps.sh

@@ -0,0 +1,49 @@
+#!/usr/bin/env bash
+# Print one section of references/traps.md.
+#
+# traps.md is ~18 KB and every section but one is irrelevant to any given edit: a shell fix needs
+# 642 bytes of it, a Dockerfile fix 2.6 KB, and "CI and review bots" — 35% of the file — is needed
+# at steps 7-8 and never at step 4. A markdown anchor cannot be loaded on its own, so reading the
+# file to reach one section pays for all of them. This prints just the section, so the routing
+# table in SKILL.md step 4 costs what it claims to.
+#
+# Usage: traps.sh <keyword>   # substring of a section heading, case-insensitive
+#        traps.sh             # list the sections
+set -uo pipefail
+
+TRAPS="$(cd "$(dirname "${BASH_SOURCE[0]}")/.." && pwd)/references/traps.md"
+[ -f "$TRAPS" ] || { echo "not found: $TRAPS" >&2; exit 1; }
+
+# The Contents list duplicates the headings; grep the headings themselves so the list cannot drift.
+list() {
+    echo "sections (pass any substring):"
+    grep '^## ' "$TRAPS" | grep -v '^## Contents' | sed 's/^## /  /'
+}
+
+[ $# -eq 0 ] && { list; exit 0; }
+
+# awk over exact heading text: section names contain '/' and other characters that would need
+# escaping in a sed address, and a keyword matching several headings should be an error, not a
+# silent pick of the first.
+mapfile -t matches < <(grep '^## ' "$TRAPS" | grep -v '^## Contents' |
+    grep -iF -- "$1" | sed 's/^## //')
+
+case "${#matches[@]}" in
+    0)
+        echo "no section matching '$1'" >&2
+        list >&2
+        exit 1
+        ;;
+    1) ;;
+    *)
+        echo "'$1' matches ${#matches[@]} sections — be more specific:" >&2
+        printf '  %s\n' "${matches[@]}" >&2
+        exit 1
+        ;;
+esac
+
+awk -v want="## ${matches[0]}" '
+    $0 == want { inside = 1; print; next }
+    inside && /^## / { exit }
+    inside { print }
+' "$TRAPS"

.claude/skills/hassio-addon-workflow/scripts/validate.sh

@@ -13,31 +13,22 @@ set -uo pipefail
 if root=$(git rev-parse --show-toplevel 2> /dev/null); then cd "$root" || exit 1; fi
 
 ADDON="${1:-}"
-[ "${ADDON:-}" = "--vs-master" ] && {
+[ "${ADDON:-}" = "--vs-master" ] && { ADDON=""; set -- --vs-master; }
-    ADDON=""
-    set -- --vs-master
-}
 VS_MASTER=false
 for a in "$@"; do [ "$a" = "--vs-master" ] && VS_MASTER=true; done
 
 if [ -z "$ADDON" ]; then
-    mapfile -t _dirs < <(git diff --name-only origin/master...HEAD 2> /dev/null \
+    mapfile -t _dirs < <(git diff --name-only origin/master...HEAD 2> /dev/null |
-        | cut -d/ -f1 | sort -u | grep -vE '^\.')
+        cut -d/ -f1 | sort -u | grep -vE '^\.' )
     if [ "${#_dirs[@]}" -gt 1 ]; then
         echo "several changed dirs: ${_dirs[*]}"
-        echo "pass one explicitly: validate.sh <addon-dir>"
+        echo "pass one explicitly: validate.sh <addon-dir>"; exit 1
-        exit 1
     fi
     ADDON="${_dirs[0]:-}"
 fi
-[ -z "$ADDON" ] && {
+[ -z "$ADDON" ] && { echo "usage: validate.sh <addon-dir> [--vs-master]"; exit 1; }
-    echo "usage: validate.sh <addon-dir> [--vs-master]"
-    exit 1
-}
 git rev-parse --verify origin/master > /dev/null 2>&1 || {
-    echo "origin/master missing — run: git fetch origin master"
+    echo "origin/master missing — run: git fetch origin master"; exit 1; }
-    exit 1
-}
 export PYTHONDONTWRITEBYTECODE=1
 echo "== validating $ADDON =="
 
@@ -45,22 +36,14 @@ fail=0
 note() { printf '  %-13s %s\n' "$1" "$2"; }
 # execline `run`/`finish` files are not shell (25 of them here, across 21 add-ons). Neither
 # linter below can read one, so anything either says about it is noise.
-is_execline() {
+is_execline() { local l; IFS= read -r l < "$1" 2> /dev/null; [[ $l == '#!'*execlineb* ]]; }
-    local l
-    IFS= read -r l < "$1" 2> /dev/null
-    [[ $l == '#!'*execlineb* ]]
-}
 
 # Shell: bash -n then shellcheck -x (follows sourced files, as CI does). One list for both.
 files=()
 while IFS= read -r f; do is_execline "$f" || files+=("$f"); done \
     < <(find "$ADDON" -type f \( -name '*.sh' -o -name 'run' -o -name 'finish' -o -name 'autostart' \) 2> /dev/null)
 for f in "${files[@]}"; do
-    if ! out=$(bash -n "$f" 2>&1); then
+    if ! out=$(bash -n "$f" 2>&1); then note "bash -n" "FAIL $f"; echo "$out" | sed 's/^/      /'; fail=1; fi
-        note "bash -n" "FAIL $f"
-        echo "$out" | sed 's/^/      /'
-        fail=1
-    fi
 done
 [ "$fail" -eq 0 ] && note "bash -n" "${#files[@]} file(s) checked"
 
@@ -82,16 +65,13 @@ command -v hadolint > /dev/null 2>&1 && [ -f "$ADDON/Dockerfile" ] && {
 
 if [ -f "$ADDON/config.yaml" ]; then
     # path passed as argv, never interpolated into Python source
-    python3 - "$ADDON/config.yaml" << 'PY' || {
+    python3 - "$ADDON/config.yaml" <<'PY' || { note "config.yaml" "FAIL parse"; fail=1; }
 import yaml,sys
 d=yaml.safe_load(open(sys.argv[1]))
 print('  %-13s ok (version=%s, %d options)' % ('config.yaml', d.get('version'), len(d.get('options') or {})))
 missing=[k for k in (d.get('options') or {}) if k not in (d.get('schema') or {})]
 if missing: print('  %-13s options with no schema entry: %s' % ('WARN', missing)); sys.exit(0)
 PY
-        note "config.yaml" "FAIL parse"
-        fail=1
-    }
     command -v yamllint > /dev/null 2>&1 && {
         yl=$(yamllint -f parsable "$ADDON/config.yaml" 2>&1 | grep -c .)
         note "yamllint" "$yl finding(s) (compare with --vs-master)"
@@ -99,10 +79,7 @@ PY
 fi
 
 while IFS= read -r f; do
-    python3 -m py_compile "$f" 2> /dev/null || {
+    python3 -m py_compile "$f" 2> /dev/null || { note "py_compile" "FAIL $f"; fail=1; }
-        note "py_compile" "FAIL $f"
-        fail=1
-    }
 done < <(find "$ADDON" -type f -name '*.py' 2> /dev/null)
 
 $VS_MASTER && command -v npx > /dev/null 2>&1 && [ -f "$ADDON/CHANGELOG.md" ] && {
@@ -119,8 +96,7 @@ if git diff --name-only origin/master...HEAD 2> /dev/null | grep -Fxq "$ADDON/CH
     note "CHANGELOG" "updated"
 else
     # This one IS gated: onpr_check-pr.yaml exits 1 without it.
-    note "CHANGELOG" "NOT UPDATED for $ADDON — CI hard-gates this"
+    note "CHANGELOG" "NOT UPDATED for $ADDON — CI hard-gates this"; fail=1
-    fail=1
 fi
 if git diff origin/master...HEAD -- "$ADDON/config.yaml" 2> /dev/null | grep -q '^+version:'; then
     note "version" "bumped"
@@ -134,8 +110,7 @@ note "docker build" "NOT tested locally (dockerd unavailable) — CI is the only
 if $VS_MASTER; then
     echo
     echo "== findings ADDED by this diff (pre-existing ones filtered out) =="
-    tmp=$(mktemp -d)
+    tmp=$(mktemp -d); trap 'rm -rf "$tmp"' EXIT
-    trap 'rm -rf "$tmp"' EXIT
     added=0
     # Fed by process substitution, not a pipe: a pipeline runs this in a subshell, where the
     # findings below could never reach $fail and the verdict would contradict the list.
@@ -150,26 +125,14 @@ if $VS_MASTER; then
         # cancel it out and report a false clean.
         case "$f" in
             *.sh | *autostart | */run | */finish)
-                command -v shellcheck > /dev/null 2>&1 || {
+                command -v shellcheck > /dev/null 2>&1 || { echo "  $f: SKIPPED (shellcheck not installed)"; continue; }
-                    echo "  $f: SKIPPED (shellcheck not installed)"
+                cmd() { shellcheck -x -f gcc "$1" 2>&1 | sed 's/^[^:]*:[0-9]*:[0-9]*://'; } ;;
-                    continue
-                }
-                cmd() { shellcheck -x -f gcc "$1" 2>&1 | sed 's/^[^:]*:[0-9]*:[0-9]*://'; }
-                ;;
             *.yaml | *.yml)
-                command -v yamllint > /dev/null 2>&1 || {
+                command -v yamllint > /dev/null 2>&1 || { echo "  $f: SKIPPED (yamllint not installed)"; continue; }
-                    echo "  $f: SKIPPED (yamllint not installed)"
+                cmd() { yamllint -f parsable "$1" 2>&1 | sed 's/^[^:]*//; s/^:[0-9]*:[0-9]*//'; } ;;
-                    continue
-                }
-                cmd() { yamllint -f parsable "$1" 2>&1 | sed 's/^[^:]*//; s/^:[0-9]*:[0-9]*//'; }
-                ;;
             *Dockerfile)
-                command -v hadolint > /dev/null 2>&1 || {
+                command -v hadolint > /dev/null 2>&1 || { echo "  $f: SKIPPED (hadolint not installed)"; continue; }
-                    echo "  $f: SKIPPED (hadolint not installed)"
+                cmd() { hadolint "$1" 2>&1 | sed 's/^[^:]*//; s/^:[0-9]*//'; } ;;
-                    continue
-                }
-                cmd() { hadolint "$1" 2>&1 | sed 's/^[^:]*//; s/^:[0-9]*//'; }
-                ;;
             *) continue ;;
         esac
         b=$(cmd "$tmp/base" | sort)
@@ -178,8 +141,7 @@ if $VS_MASTER; then
         [ -n "$new" ] && {
             echo "  $f: $(printf '%s\n' "$new" | grep -c .) NEW finding(s)"
             printf '%s\n' "$new" | sed 's/^/      /' | head -5
-            added=1
+            added=1; fail=1
-            fail=1
         }
     done < <(git diff --name-only origin/master...HEAD -- "$ADDON" 2> /dev/null)
     [ "$added" -eq 0 ] && echo "  (none — this diff introduced no new lint findings)"

.github/prompts/issue-classify.md

@@ -40,7 +40,7 @@ the check is a guard, not a common case.)
 ## Rule 1 — pick exactly one verdict
 
 | verdict | when |
-| --- | --- |
+|---|---|
 | `duplicate` | An existing open or closed issue reports the same thing. Set `duplicate_of`. |
 | `needs-info` | You cannot tell what is wrong without the add-on version, HA version, architecture, config, or the actual log output. |
 | `question` | A usage question answerable from `DOCS.md`, the wiki, or the add-on config. Not a defect. |

.github/prompts/issue-fix.md

@@ -39,7 +39,7 @@ rest are on you: nothing checks them, so breaking one ships silently.
    that value, and compare:
 
    | `version` vs `U` | what to do | example |
-   | --- | --- | --- |
+   |---|---|---|
    | identical | **append** `.1` | sonarr `4.0.19.3001` -> `4.0.19.3001.1` |
    | `U` + `.` + digits | **increment** those digits | radarr `6.3.0.10514.1` -> `6.3.0.10514.2` |
    | anything else | **leave it alone** | plex, readarr, joal |

.github/scripts/ai_guard_paths.sh

@@ -44,7 +44,7 @@ for pr in $PRS; do
         echo "$BAD"
         # Ensure the label exists before adding it — with set -e a missing
         # label would abort the whole loop and skip any PRs behind this one.
-        gh label create "ai:blocked" --repo "$REPO" --color ededed > /dev/null 2>&1 || true
+        gh label create "ai:blocked" --repo "$REPO" --color ededed >/dev/null 2>&1 || true
         gh pr ready "$pr" --repo "$REPO" --undo || true
         gh pr edit "$pr" --repo "$REPO" --add-label "ai:blocked"
         gh pr comment "$pr" --repo "$REPO" --body \

.github/scripts/ai_triage_context.sh

@@ -21,17 +21,14 @@ TITLE=$(jq -r '.title' "$OUT/issue.json")
 
 # ---------------------------------------------------------------- addon slug
 # Titles follow "🐛 [Immich Frame] ENV_VARS arent being picked up".
-RAW=$(sed -n 's/.*\[\([^]]*\)\].*/\1/p' <<< "$TITLE" | head -n1)
+RAW=$(sed -n 's/.*\[\([^]]*\)\].*/\1/p' <<<"$TITLE" | head -n1)
 ADDON=""
 if [ -n "$RAW" ]; then
-    CAND=$(tr '[:upper:] ' '[:lower:]_' <<< "$RAW")
+  CAND=$(tr '[:upper:] ' '[:lower:]_' <<<"$RAW")
   # Directory list without checking out any of them.
   git ls-tree -d --name-only HEAD > "$OUT/dirs.txt"
   for guess in "$CAND" "${CAND//_/-}" "${CAND//_/.}"; do
-        if grep -qxF "$guess" "$OUT/dirs.txt"; then
+    if grep -qxF "$guess" "$OUT/dirs.txt"; then ADDON="$guess"; break; fi
-            ADDON="$guess"
-            break
-        fi
   done
   # Separator-insensitive exact match: a title like "[Calibre-web]" (hyphen)
   # against a directory named calibre_web (underscore) matches neither exact
@@ -39,12 +36,9 @@ if [ -n "$RAW" ]; then
   # below, which picks the shorter "calibre" instead — the wrong add-on.
   # Stripping -, _, . from both sides before comparing catches this case.
   if [ -z "$ADDON" ]; then
-        CAND_STRIPPED=$(tr -d '_.-' <<< "$CAND")
+    CAND_STRIPPED=$(tr -d '_.-' <<<"$CAND")
     while IFS= read -r dir; do
-            if [ "$(tr -d '_.-' <<< "$dir")" = "$CAND_STRIPPED" ]; then
+      if [ "$(tr -d '_.-' <<<"$dir")" = "$CAND_STRIPPED" ]; then ADDON="$dir"; break; fi
-                ADDON="$dir"
-                break
-            fi
     done < "$OUT/dirs.txt"
   fi
   # Last resort: longest directory name contained in the candidate.
@@ -105,7 +99,7 @@ if [ -n "$ADDON" ]; then
 
       echo
       echo "## Recent commits touching ${ADDON}/"
-            git log -n 15 --date=short --pretty='- %ad %h %s' -- "$ADDON" 2> /dev/null || true
+      git log -n 15 --date=short --pretty='- %ad %h %s' -- "$ADDON" 2>/dev/null || true
     fi
   } >> "$CTX"
 fi
@@ -114,14 +108,14 @@ fi
 {
   echo
   echo "## Similar existing issues (candidate duplicates)"
-    KEYWORDS=$(tr -cs '[:alnum:]' ' ' <<< "$TITLE" \
+  KEYWORDS=$(tr -cs '[:alnum:]' ' ' <<<"$TITLE" \
              | tr '[:upper:]' '[:lower:]' \
              | tr ' ' '\n' | awk 'length($0)>3' | head -n6 | paste -sd' ')
   # Excludes the issue being triaged: if it's already indexed by GitHub search
   # by the time this runs, keyword overlap with its own title would otherwise
   # list it as a "candidate duplicate" of itself.
   gh search issues --repo "$REPO" --limit 15 \
-        --json number,title,state,url -- "$KEYWORDS" 2> /dev/null \
+     --json number,title,state,url -- "$KEYWORDS" 2>/dev/null \
     | jq -r --argjson self "$ISSUE_NUMBER" \
         '.[] | select(.number != $self) | "- #\(.number) [\(.state)] \(.title)"' \
     || echo "(search unavailable)"

.github/workflows/daily_ai_fix.yaml

@@ -125,7 +125,7 @@ jobs:
 
       - name: Analyse and fix
         if: steps.batch.outputs.count != '0'
-        uses: anthropics/claude-code-action@a874e9ecd7bb36efdad65429c6b35815f5a08f10  # v1
+        uses: anthropics/claude-code-action@d75b94d5ad426cb8546e6628b6f5f19b84e5cce1  # v1
         with:
           claude_code_oauth_token: ${{ secrets.CLAUDE_CODE_OAUTH_TOKEN }}
           # Skip the OIDC -> Claude App token exchange. The scheduled path

.github/workflows/on_claude_mention.yml

@@ -64,7 +64,7 @@ jobs:
           fetch-depth: 1
 
       - name: Run Claude Code
-        uses: anthropics/claude-code-action@a874e9ecd7bb36efdad65429c6b35815f5a08f10  # v1
+        uses: anthropics/claude-code-action@d75b94d5ad426cb8546e6628b6f5f19b84e5cce1  # v1
         with:
           claude_code_oauth_token: ${{ secrets.CLAUDE_CODE_OAUTH_TOKEN }}
           # AI_PR_TOKEN, not GITHUB_TOKEN, so a PR Claude opens triggers CI.

.github/workflows/on_issue_approved.yaml

@@ -135,7 +135,7 @@ jobs:
 
       - name: Execute the plan
         if: steps.bundle.outputs.has_plan == 'true'
-        uses: anthropics/claude-code-action@a874e9ecd7bb36efdad65429c6b35815f5a08f10  # v1
+        uses: anthropics/claude-code-action@d75b94d5ad426cb8546e6628b6f5f19b84e5cce1  # v1
         with:
           claude_code_oauth_token: ${{ secrets.CLAUDE_CODE_OAUTH_TOKEN }}
           # Skip the OIDC -> Claude App token exchange, which 401s whenever

.github/workflows/on_issues_ai_triage.yaml

@@ -166,7 +166,7 @@ jobs:
         id: classify
         if: github.event_name != 'issue_comment' || steps.claim.outputs.go == 'true'
         continue-on-error: true
-        uses: anthropics/claude-code-action@a874e9ecd7bb36efdad65429c6b35815f5a08f10  # v1
+        uses: anthropics/claude-code-action@d75b94d5ad426cb8546e6628b6f5f19b84e5cce1  # v1
         with:
           claude_code_oauth_token: ${{ secrets.CLAUDE_CODE_OAUTH_TOKEN }}
           # Without this the action falls back to the OIDC -> Claude App token

.github/workflows/on_pr_coderabbit.yml

@@ -79,7 +79,7 @@ jobs:
 
       - name: Address CodeRabbit comments
         if: steps.claim.outputs.go == 'true'
-        uses: anthropics/claude-code-action@a874e9ecd7bb36efdad65429c6b35815f5a08f10  # v1
+        uses: anthropics/claude-code-action@d75b94d5ad426cb8546e6628b6f5f19b84e5cce1  # v1
         with:
           claude_code_oauth_token: ${{ secrets.CLAUDE_CODE_OAUTH_TOKEN }}
           # Skip the OIDC -> Claude App token exchange, which 401s whenever

.templates/00-banner.sh

@@ -6,7 +6,7 @@ set -e
 # Banner
 # ======================================================================
 
-if ! bashio::supervisor.ping 2> /dev/null; then
+if ! bashio::supervisor.ping 2>/dev/null; then
     # Source standalone bashio first to provide function definitions
     if [ -f /usr/local/lib/bashio-standalone.sh ]; then
         source /usr/local/lib/bashio-standalone.sh
@@ -19,8 +19,8 @@ if ! bashio::supervisor.ping 2> /dev/null; then
     if [ ! -f /usr/bin/bashio ]; then
         cp -rf /usr/local/lib/bashio-standalone.sh /usr/bin/bashio
     fi
-    grep -rl "^#!.*bashio" /etc \
+    grep -rl "^#!.*bashio" /etc |
-        | while IFS= read -r f; do
+    while IFS= read -r f; do
         grep -qF "source /usr/local/lib/bashio-standalone.sh" "$f" && continue
         sed -i '1a source /usr/local/lib/bashio-standalone.sh' "$f"
     done
@@ -49,7 +49,7 @@ bashio::log.green ' Provided by: https://github.com/alexbelgium/hassio-addons '
 bashio::log.blue '-----------------------------------------------------------'
 
 # Adapt user abc
-if command -v id &> /dev/null && id abc &> /dev/null; then
+if command -v id &>/dev/null && id abc &>/dev/null; then
     if bashio::config.has_value "PUID" && bashio::config.has_value "PGID"; then
         PUID="$(bashio::config "PUID")"
         PGID="$(bashio::config "PGID")"

.templates/00-global_var.sh

@@ -152,15 +152,15 @@ if [[ "${1:-}" == "--self-test" ]]; then
         done
     fi
 
-    [[ "$self_test_rc" -eq 0 ]] \
+    [[ "$self_test_rc" -eq 0 ]] &&
-        && echo "${#self_test_values[@]} values round-tripped unchanged (export block + dotenv)"
+        echo "${#self_test_values[@]} values round-tripped unchanged (export block + dotenv)"
     exit "$self_test_rc"
 fi
 
 ################################################################################
 # Guard: only run inside Supervisor-managed add-ons
 ################################################################################
-if ! bashio::supervisor.ping 2> /dev/null; then
+if ! bashio::supervisor.ping 2>/dev/null; then
     echo "..."
     exit 0
 fi
@@ -179,7 +179,7 @@ ENV_FILE="/.env"
 ETC_ENV_FILE="/etc/environment"
 
 [[ -f "$JSONSOURCE" ]] || bashio::exit.nok "Missing $JSONSOURCE"
-command -v jq > /dev/null || bashio::exit.nok "jq is required"
+command -v jq >/dev/null || bashio::exit.nok "jq is required"
 
 mkdir -p /etc
 touch "$ETC_ENV_FILE"
@@ -193,10 +193,7 @@ SECRETSOURCE=""
 
 resolve_secret() {
     local v="$1" name line
-    [[ "$v" =~ ^[[:space:]]*\!secret[[:space:]]+(.+)$ ]] || {
+    [[ "$v" =~ ^[[:space:]]*\!secret[[:space:]]+(.+)$ ]] || { printf '%s' "$v"; return; }
-        printf '%s' "$v"
-        return
-    }
     name="${BASH_REMATCH[1]}"
     [[ -n "$SECRETSOURCE" ]] || bashio::exit.nok "Secrets not mounted"
 

.templates/00-smb_mounts.sh

@@ -4,7 +4,7 @@
 
 set -e
 
-if ! bashio::supervisor.ping 2> /dev/null; then
+if ! bashio::supervisor.ping 2>/dev/null; then
   bashio::log.blue "Disabled : please use another method"
   exit 0
 fi
@@ -33,16 +33,16 @@ test_mount() {
 
   _test_write() {
     local testfile="$mountpoint/.writetest_$$"
-        if : > "$testfile" 2> /dev/null; then
+    if : >"$testfile" 2>/dev/null; then
-            rm -f "$testfile" 2> /dev/null || true
+      rm -f "$testfile" 2>/dev/null || true
       return 0
     else
-            rm -f "$testfile" 2> /dev/null || true
+      rm -f "$testfile" 2>/dev/null || true
       return 1
     fi
   }
 
-    if _test_write 2> /dev/null; then
+  if _test_write 2>/dev/null; then
     MOUNTED=true
     return 0
   fi
@@ -53,9 +53,9 @@ test_mount() {
     echo "... retrying mount with noserverino"
     MOUNTOPTIONS="${orig_mountoptions},noserverino"
 
-        umount "$mountpoint" 2> /dev/null || true
+    umount "$mountpoint" 2>/dev/null || true
     if mount_drive "$MOUNTOPTIONS"; then
-            if _test_write 2> /dev/null; then
+      if _test_write 2>/dev/null; then
         MOUNTED=true
         return 0
       fi
@@ -66,9 +66,9 @@ test_mount() {
     echo "... retrying mount with noperm"
     MOUNTOPTIONS="${orig_mountoptions},noperm"
 
-        umount "$mountpoint" 2> /dev/null || true
+    umount "$mountpoint" 2>/dev/null || true
     if mount_drive "$MOUNTOPTIONS"; then
-            if _test_write 2> /dev/null; then
+      if _test_write 2>/dev/null; then
         MOUNTED=true
         return 0
       fi
@@ -88,9 +88,9 @@ mount_drive() {
   MOUNTOPTIONS="$1"
 
   if [[ "$FSTYPE" == "cifs" ]]; then
-        mount -t cifs -o "$MOUNTOPTIONS" "$disk" "/mnt/$diskname" 2> "$ERRORCODE_FILE" || MOUNTED=false
+    mount -t cifs -o "$MOUNTOPTIONS" "$disk" "/mnt/$diskname" 2>"$ERRORCODE_FILE" || MOUNTED=false
   elif [[ "$FSTYPE" == "nfs" ]]; then
-        mount -t nfs -o "$MOUNTOPTIONS" "$disk" "/mnt/$diskname" 2> "$ERRORCODE_FILE" || MOUNTED=false
+    mount -t nfs -o "$MOUNTOPTIONS" "$disk" "/mnt/$diskname" 2>"$ERRORCODE_FILE" || MOUNTED=false
   fi
 
   if [[ "$MOUNTED" == "true" ]]; then
@@ -106,7 +106,7 @@ retry_cifs_with_vers_ladder_on_dialect_failure() {
 
   local err mountpoint
   mountpoint="/mnt/$diskname"
-    err="$(cat "$ERRORCODE_FILE" 2> /dev/null || true)"
+  err="$(cat "$ERRORCODE_FILE" 2>/dev/null || true)"
 
   if echo "$err" | grep -Eq 'mount error\(13\)|Permission denied|NT_STATUS_(LOGON_FAILURE|ACCESS_DENIED)|STATUS_(LOGON_FAILURE|ACCESS_DENIED)'; then
     return 0
@@ -132,7 +132,7 @@ retry_cifs_with_vers_ladder_on_dialect_failure() {
     for vers in "${vers_variants[@]}"; do
       for sectry in "${sec_variants[@]}"; do
         [[ "$MOUNTED" == "false" ]] || break
-                umount "$mountpoint" 2> /dev/null || true
+        umount "$mountpoint" 2>/dev/null || true
         try_opts="${base_opts}${vopt},vers=${vers}${sectry}"
         mount_drive "$try_opts"
       done
@@ -154,7 +154,7 @@ retry_cifs_with_vers_ladder_on_dialect_failure() {
       for vers in "${vers_variants2[@]}"; do
         for sectry in "${sec_variants[@]}"; do
           [[ "$MOUNTED" == "false" ]] || break
-                    umount "$mountpoint" 2> /dev/null || true
+          umount "$mountpoint" 2>/dev/null || true
           try_opts="${base_opts}${vopt},vers=${vers}${sectry}"
           mount_drive "$try_opts"
         done
@@ -167,7 +167,7 @@ retry_cifs_with_vers_ladder_on_dialect_failure() {
       for vopt in "${opt_variants[@]}"; do
         for vers in "${vers_variants2[@]}"; do
           [[ "$MOUNTED" == "false" ]] || break
-                    umount "$mountpoint" 2> /dev/null || true
+          umount "$mountpoint" 2>/dev/null || true
           try_opts="${base_opts}${vopt},vers=${vers},sec=ntlmssp"
           mount_drive "$try_opts"
         done
@@ -246,13 +246,13 @@ if bashio::config.has_value 'networkdisks'; then
     diskname="${diskname//\\//}"
     diskname="${diskname##*/}"
 
-        if mountpoint -q "/mnt/$diskname" 2> /dev/null; then
+    if mountpoint -q "/mnt/$diskname" 2>/dev/null; then
       bashio::log.warning "...... mount point /mnt/$diskname already in use (name collision for $disk). Skipping this share."
       continue
     fi
 
     ERRORCODE_FILE="/tmp/mount_error_${diskname//[^a-zA-Z0-9._-]/_}.log"
-        : > "$ERRORCODE_FILE" || true
+    : >"$ERRORCODE_FILE" || true
 
     MOUNTED=false
     CIFS_LADDER_ATTEMPTED=false
@@ -266,13 +266,13 @@ if bashio::config.has_value 'networkdisks'; then
     if [[ "$FSTYPE" == "cifs" ]]; then
       if [[ ! "$disk" =~ ^//[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+/.+ ]]; then
         bashio::log.fatal "...... invalid CIFS path \"$disk\". Use //123.12.12.12/sharedfolder,//123.12.12.12/sharedfolder2"
-                echo "Invalid CIFS path structure: $disk" > "$ERRORCODE_FILE" || true
+        echo "Invalid CIFS path structure: $disk" >"$ERRORCODE_FILE" || true
         continue
       fi
     else
       if [[ ! "$disk" =~ ^[^/:]+:/.+ ]]; then
         bashio::log.fatal "...... invalid NFS path \"$disk\". Use server:/export/path or 123.12.12.12:/export/path"
-                echo "Invalid NFS path structure: $disk" > "$ERRORCODE_FILE" || true
+        echo "Invalid NFS path structure: $disk" >"$ERRORCODE_FILE" || true
         continue
       fi
     fi
@@ -289,7 +289,7 @@ if bashio::config.has_value 'networkdisks'; then
         if [[ -n "${CIFSDOMAIN:-}" ]]; then
           printf 'domain=%s\n' "$CIFSDOMAIN"
         fi
-            } > "$CRED_FILE"
+      } >"$CRED_FILE"
     fi
 
     if [[ "$FSTYPE" == "cifs" ]]; then
@@ -303,8 +303,8 @@ if bashio::config.has_value 'networkdisks'; then
 
     if [[ "$MOUNTED" == "false" ]]; then
       if [[ "$FSTYPE" == "cifs" ]]; then
-                if command -v nmap > /dev/null 2>&1; then
+        if command -v nmap >/dev/null 2>&1; then
-                    output="$(nmap -F "$server" -T5 -oG - 2> /dev/null || true)"
+          output="$(nmap -F "$server" -T5 -oG - 2>/dev/null || true)"
           if ! echo "$output" | grep -q "445/open"; then
             if echo "$output" | grep -q "/open"; then
               bashio::log.fatal "...... $server is reachable but SMB port not opened, stopping script"
@@ -312,7 +312,7 @@ if bashio::config.has_value 'networkdisks'; then
               bashio::log.fatal "...... fatal : $server not reachable, is it correct"
             fi
             cleanup_cred
-                        rm -f "$ERRORCODE_FILE" 2> /dev/null || true
+            rm -f "$ERRORCODE_FILE" 2>/dev/null || true
             continue
           fi
           echo "...... $server is confirmed reachable"
@@ -320,13 +320,13 @@ if bashio::config.has_value 'networkdisks'; then
           bashio::log.warning "...... nmap not available; skipping SMB port reachability test"
         fi
 
-                if command -v smbclient > /dev/null 2>&1; then
+        if command -v smbclient >/dev/null 2>&1; then
           OUTPUT="$(smbclient -t 2 -L "$server" -U "$USERNAME%$PASSWORD" -c "exit" $DOMAINCLIENT 2>&1 || true)"
 
           if echo "$OUTPUT" | grep -q "LOGON_FAILURE"; then
             bashio::log.fatal "...... incorrect Username, Password, or Domain! Script will stop."
             cleanup_cred
-                        rm -f "$ERRORCODE_FILE" 2> /dev/null || true
+            rm -f "$ERRORCODE_FILE" 2>/dev/null || true
             bashio::addon.stop
           elif echo "$OUTPUT" | grep -q "tree connect failed" || echo "$OUTPUT" | grep -q "NT_STATUS_CONNECTION_DISCONNECTED"; then
             echo "... using SMBv1"
@@ -344,8 +344,8 @@ if bashio::config.has_value 'networkdisks'; then
 
         SMBRAW=""
         SMB1_DETECTED=false
-                if command -v nmap > /dev/null 2>&1; then
+        if command -v nmap >/dev/null 2>&1; then
-                    NMAP_OUTPUT="$(nmap --script smb-protocols -p 445 "$server" 2> /dev/null || true)"
+          NMAP_OUTPUT="$(nmap --script smb-protocols -p 445 "$server" 2>/dev/null || true)"
           SMBRAW="$(
             echo "$NMAP_OUTPUT" \
               | awk '/SMB2_DIALECT_/ {print $NF}' \
@@ -364,7 +364,7 @@ if bashio::config.has_value 'networkdisks'; then
           302) SMBVERS=",vers=3.02" ;;
           300) SMBVERS=",vers=3.0" ;;
           210) SMBVERS=",vers=2.1" ;;
-                    202 | 200) SMBVERS=",vers=2.0" ;;
+          202|200) SMBVERS=",vers=2.0" ;;
           *) SMBVERS="" ;;
         esac
 
@@ -376,7 +376,7 @@ if bashio::config.has_value 'networkdisks'; then
 
         if [[ -n "$SMBVERS" ]]; then
           echo "...... SMB version detected : ${SMBVERS#,vers=}"
-                elif command -v smbclient > /dev/null 2>&1 && smbclient -t 2 -L "$server" -m NT1 -U "$USERNAME%$PASSWORD" $DOMAINCLIENT -c "exit" &> /dev/null; then
+        elif command -v smbclient >/dev/null 2>&1 && smbclient -t 2 -L "$server" -m NT1 -U "$USERNAME%$PASSWORD" $DOMAINCLIENT -c "exit" &>/dev/null; then
           echo "...... SMB version : only SMBv1 is supported, this can lead to issues"
           SECVERS=",sec=ntlm"
           SMBVERS=",vers=1.0"
@@ -405,8 +405,8 @@ if bashio::config.has_value 'networkdisks'; then
         fi
 
       else
-                if command -v nmap > /dev/null 2>&1; then
+        if command -v nmap >/dev/null 2>&1; then
-                    output="$(nmap -F "$server" -T5 -oG - 2> /dev/null || true)"
+          output="$(nmap -F "$server" -T5 -oG - 2>/dev/null || true)"
           if ! echo "$output" | grep -Eq '(2049|111)/open'; then
             bashio::log.fatal "...... $server is reachable but NFS ports not open"
           fi
@@ -424,7 +424,7 @@ if bashio::config.has_value 'networkdisks'; then
 
     if [[ "$MOUNTED" == "true" ]]; then
       bashio::log.info "...... $disk successfully mounted to /mnt/$diskname with options ${MOUNTOPTIONS/$PASSWORD/XXXXXXXXXX}"
-            rm -f "$ERRORCODE_FILE" 2> /dev/null || true
+      rm -f "$ERRORCODE_FILE" 2>/dev/null || true
 
       if [[ "$FSTYPE" == "cifs" && "$MOUNTOPTIONS" == *"vers=1.0"* ]]; then
         bashio::log.warning ""
@@ -437,14 +437,14 @@ if bashio::config.has_value 'networkdisks'; then
     elif [[ "$MOUNTED" == "readonly" ]]; then
       bashio::log.warning "...... $disk mounted to /mnt/$diskname but is READ-ONLY or not writable by UID/GID ${PUID#,uid=}:${PGID#,gid=}."
       bashio::log.warning "...... Check Samba share permissions, or try setting PUID/PGID to 0/0 (root), or adjust server ACLs."
-            rm -f "$ERRORCODE_FILE" 2> /dev/null || true
+      rm -f "$ERRORCODE_FILE" 2>/dev/null || true
       cleanup_cred
 
     else
       if [[ "$FSTYPE" == "cifs" ]]; then
         bashio::log.fatal "Error, unable to mount $disk to /mnt/$diskname with username $USERNAME. Please check share path, username/password/domain; try UID/GID 0."
         bashio::log.fatal "Here is some debugging info :"
-                if command -v smbclient > /dev/null 2>&1; then
+        if command -v smbclient >/dev/null 2>&1; then
           smbclient -t 2 -L "$server" -U "$USERNAME%$PASSWORD" -c "exit" $DOMAINCLIENT || true
         else
           bashio::log.warning "smbclient not available; cannot print SMB debugging info"
@@ -459,13 +459,13 @@ if bashio::config.has_value 'networkdisks'; then
         mount_drive "rw"
       fi
 
-            ERR_READ="$(cat "$ERRORCODE_FILE" 2> /dev/null || true)"
+      ERR_READ="$(cat "$ERRORCODE_FILE" 2>/dev/null || true)"
       bashio::log.fatal "Error read : ${ERR_READ:-unknown error}, addon will stop in 1 min"
 
-            umount "/mnt/$diskname" 2> /dev/null || true
+      umount "/mnt/$diskname" 2>/dev/null || true
-            rmdir "/mnt/$diskname" 2> /dev/null || true
+      rmdir "/mnt/$diskname" 2>/dev/null || true
       cleanup_cred
-            rm -f "$ERRORCODE_FILE" 2> /dev/null || true
+      rm -f "$ERRORCODE_FILE" 2>/dev/null || true
 
       bashio::addon.stop
     fi

.templates/01-config_yaml.sh

@@ -138,9 +138,9 @@ append_unique_line() {
     # $1=file, $2=line
     local _file="$1"
     local _line="$2"
-    mkdir -p "$(dirname "$_file")" 2> /dev/null || true
+    mkdir -p "$(dirname "$_file")" 2>/dev/null || true
-    touch "$_file" 2> /dev/null || true
+    touch "$_file" 2>/dev/null || true
-    grep -qxF -- "$_line" "$_file" 2> /dev/null || echo "$_line" >> "$_file"
+    grep -qxF -- "$_line" "$_file" 2>/dev/null || echo "$_line" >> "$_file"
 }
 
 while IFS= read -r line; do

.templates/01-custom_script.sh

@@ -11,20 +11,14 @@ pick_exec_dir() {
   for d in /dev/shm /run /var/run /mnt /root /; do
     if [ -d "$d" ] && [ -w "$d" ]; then
       local t="${d%/}/.exec_test_$$"
-            printf '#!/bin/sh\necho ok\n' > "$t" 2> /dev/null || {
+      printf '#!/bin/sh\necho ok\n' >"$t" 2>/dev/null || { rm -f "$t" 2>/dev/null || true; continue; }
-                rm -f "$t" 2> /dev/null || true
+      chmod 700 "$t" 2>/dev/null || { rm -f "$t" 2>/dev/null || true; continue; }
-                continue
+      if "$t" >/dev/null 2>&1; then
-            }
+        rm -f "$t" 2>/dev/null || true
-            chmod 700 "$t" 2> /dev/null || {
-                rm -f "$t" 2> /dev/null || true
-                continue
-            }
-            if "$t" > /dev/null 2>&1; then
-                rm -f "$t" 2> /dev/null || true
         echo "$d"
         return 0
       fi
-            rm -f "$t" 2> /dev/null || true
+      rm -f "$t" 2>/dev/null || true
     fi
   done
   return 1
@@ -96,7 +90,7 @@ validate_shebang() {
   local errfile msg
 
   # shellcheck disable=SC2206
-    local cmd=($candidate)
+  local cmd=( $candidate )
   local exe="${cmd[0]}"
 
   if [ ! -x "$exe" ]; then
@@ -109,18 +103,18 @@ validate_shebang() {
   {
     printf '#!%s\n' "$candidate"
     printf '%s\n' "$probe_script_content"
-    } > "$tmp"
+  } >"$tmp"
-    chmod 700 "$tmp" 2> /dev/null || true
+  chmod 700 "$tmp" 2>/dev/null || true
 
   set +e
-    out="$("$tmp" 2> "$errfile")"
+  out="$("$tmp" 2>"$errfile")"
   rc=$?
   set -e
 
-    rm -f "$tmp" 2> /dev/null || true
+  rm -f "$tmp" 2>/dev/null || true
 
   if [ "$rc" -eq 0 ] && [ -n "${out:-}" ] && [ "$out" != "null" ]; then
-        rm -f "$errfile" 2> /dev/null || true
+    rm -f "$errfile" 2>/dev/null || true
     return 0
   fi
 
@@ -132,7 +126,7 @@ validate_shebang() {
     msg+=$'   stderr: <empty>\n'
   fi
   SHEBANG_ERRORS+=("$msg")
-    rm -f "$errfile" 2> /dev/null || true
+  rm -f "$errfile" 2>/dev/null || true
   return 1
 }
 
@@ -153,7 +147,7 @@ if [ -z "$shebang" ]; then
   exit 1
 fi
 
-if ! command -v bashio::addon.version > /dev/null 2>&1; then
+if ! command -v bashio::addon.version >/dev/null 2>&1; then
   for f in /usr/lib/bashio/bashio.sh /usr/lib/bashio/lib.sh /usr/src/bashio/bashio.sh /usr/local/lib/bashio/bashio.sh /usr/local/lib/bashio-standalone.sh; do
     if [ -f "$f" ]; then
       # shellcheck disable=SC1090
@@ -168,7 +162,7 @@ fi
 ##################
 
 # Exit if /config is not mounted or HA not used
-if [ ! -d /config ] || ! bashio::supervisor.ping 2> /dev/null; then
+if [ ! -d /config ] || ! bashio::supervisor.ping 2>/dev/null; then
   echo "..."
   exit 0
 fi
@@ -201,7 +195,7 @@ if [ ! -f "$CONFIGSOURCE" ]; then
 fi
 
 # Convert scripts to linux
-dos2unix "$CONFIGSOURCE" > /dev/null 2>&1 || true
+dos2unix "$CONFIGSOURCE" >/dev/null 2>&1 || true
 chmod +x "$CONFIGSOURCE"
 
 if grep -q 'bashio' "$CONFIGSOURCE"; then

.templates/bashio-standalone.sh

@@ -46,8 +46,7 @@ _bashio_color() {
 }
 
 _bashio_log() {
-    local c="${1:-}"
+  local c="${1:-}"; shift || true
-    shift || true
   printf '%s%s%s\n' "$(_bashio_color "$c")" "$*" "$(_bashio_color reset)"
 }
 
@@ -56,7 +55,7 @@ _bashio_log() {
 # -----------------------------------------------------------------------------
 _bashio_is_true() {
   case "${1:-}" in
-        1 | true | TRUE | True | yes | YES | Yes | on | ON | On) return 0 ;;
+    1|true|TRUE|True|yes|YES|Yes|on|ON|On) return 0 ;;
     *) return 1 ;;
   esac
 }
@@ -100,7 +99,7 @@ _bashio_env_get() {
 _bashio_env_has() {
   local key="${1:-}"
   [ -n "$key" ] || return 1
-    _bashio_env_get "$key" > /dev/null 2>&1
+  _bashio_env_get "$key" >/dev/null 2>&1
 }
 
 # JSON options source (jq required). Prints value or empty; returns 0 always.
@@ -111,10 +110,10 @@ _bashio_json_get() {
   [ -n "$key" ] || return 0
   [ -n "$file" ] || return 0
   [ -f "$file" ] || return 0
-    command -v jq > /dev/null 2>&1 || return 0
+  command -v jq >/dev/null 2>&1 || return 0
 
   # getpath(split(".")) supports nested access; missing => empty
-    jq -er --arg k "$key" 'getpath(($k|split("."))) // empty' "$file" 2> /dev/null || true
+  jq -er --arg k "$key" 'getpath(($k|split("."))) // empty' "$file" 2>/dev/null || true
 }
 
 # Net wait using /dev/tcp with a timeout
@@ -125,7 +124,7 @@ _bashio_tcp_wait() {
   local start now
   start="$(date +%s)"
   while :; do
-        if exec 3<> "/dev/tcp/${host}/${port}" 2> /dev/null; then
+    if exec 3<>"/dev/tcp/${host}/${port}" 2>/dev/null; then
       exec 3>&- 3<&-
       return 0
     fi
@@ -139,10 +138,10 @@ _bashio_tcp_wait() {
 
 # Prefer nc if present, fallback to /dev/tcp
 _bashio_tcp_wait_nc() {
-    command -v nc > /dev/null 2>&1 || return 1
+  command -v nc >/dev/null 2>&1 || return 1
   local host="${1:-}" port="${2:-}" to="${3:-30}"
   # BusyBox and OpenBSD nc differ; cover both styles
-    nc -z -w "$to" "$host" "$port" 2> /dev/null || nc -z "$host" "$port" 2> /dev/null
+  nc -z -w "$to" "$host" "$port" 2>/dev/null || nc -z "$host" "$port" 2>/dev/null
 }
 
 # -----------------------------------------------------------------------------
@@ -174,7 +173,7 @@ bashio::supervisor.ping() {
 bashio::addon.name()         { printf '%s' "${ADDON_NAME:-Standalone container}"; }
 bashio::addon.description()  { printf '%s' "${ADDON_DESCRIPTION:-Running without Home Assistant Supervisor}"; }
 bashio::addon.version()      { printf '%s' "${BUILD_VERSION:-1.0}"; }
-bashio::addon.version_latest() { printf '%s' "${ADDON_VERSION_LATEST:-${BUILD_VERSION:-1.0}}"; }
+bashio::addon.version_latest(){ printf '%s' "${ADDON_VERSION_LATEST:-${BUILD_VERSION:-1.0}}"; }
 
 bashio::addon.update_available() {
   if [ -n "${ADDON_VERSION_LATEST:-}" ] && [ "${ADDON_VERSION_LATEST:-}" != "${BUILD_VERSION:-}" ]; then
@@ -195,11 +194,11 @@ bashio::addon.port() {
   local arg="${1:-}"
   if [[ "$arg" =~ ^[0-9]+$ ]]; then
     local v=""
-        v="$(_bashio_env_get "PORT_${arg}" 2> /dev/null || true)"
+    v="$(_bashio_env_get "PORT_${arg}" 2>/dev/null || true)"
-        [ -z "$v" ] && v="$(_bashio_env_get "ADDON_PORT_${arg}" 2> /dev/null || true)"
+    [ -z "$v" ] && v="$(_bashio_env_get "ADDON_PORT_${arg}" 2>/dev/null || true)"
     printf '%s' "${v:-$arg}"
   else
-        printf '%s' "$(_bashio_env_get "$arg" 2> /dev/null || true)"
+    printf '%s' "$(_bashio_env_get "$arg" 2>/dev/null || true)"
   fi
 }
 
@@ -208,13 +207,13 @@ bashio::addon.option() {
   local key="${1:-}" value="${2-__BASHIO_UNSET__}" file="${STANDALONE_OPTIONS_JSON:-}"
   [ -n "$key" ] || return 0
 
-    if [ -n "$file" ] && [ -f "$file" ] && command -v jq > /dev/null 2>&1; then
+  if [ -n "$file" ] && [ -f "$file" ] && command -v jq >/dev/null 2>&1; then
     local tmp
     tmp="$(mktemp)"
     if [ "$value" = "__BASHIO_UNSET__" ]; then
-            jq --arg k "$key" 'delpath(($k|split(".")))' "$file" > "$tmp" && mv "$tmp" "$file"
+      jq --arg k "$key" 'delpath(($k|split(".")))' "$file" >"$tmp" && mv "$tmp" "$file"
     else
-            jq --arg k "$key" --arg v "$value" 'setpath(($k|split(".")); $v)' "$file" > "$tmp" && mv "$tmp" "$file"
+      jq --arg k "$key" --arg v "$value" 'setpath(($k|split(".")); $v)' "$file" >"$tmp" && mv "$tmp" "$file"
     fi
     return 0
   fi
@@ -239,7 +238,7 @@ bashio::info.operating_system() {
 }
 bashio::info.arch()         { uname -m; }
 bashio::info.machine()      { uname -m; }
-bashio::info.homeassistant() { printf '%s' "standalone"; }
+bashio::info.homeassistant(){ printf '%s' "standalone"; }
 bashio::info.supervisor()  { printf '%s' "standalone"; }
 
 # -----------------------------------------------------------------------------
@@ -247,14 +246,11 @@ bashio::info.supervisor() { printf '%s' "standalone"; }
 # -----------------------------------------------------------------------------
 bashio::config() {
   local key="${1:-}"
-    [ -n "$key" ] || {
+  [ -n "$key" ] || { printf '%s' ""; return 0; }
-        printf '%s' ""
-        return 0
-    }
 
   local v=""
-    if _bashio_env_get "$key" > /dev/null 2>&1; then
+  if _bashio_env_get "$key" >/dev/null 2>&1; then
-        v="$(_bashio_env_get "$key" 2> /dev/null || true)"
+    v="$(_bashio_env_get "$key" 2>/dev/null || true)"
   fi
   [ -z "$v" ] && v="$(_bashio_json_get "$key")"
   printf '%s' "${v:-}"
@@ -275,8 +271,8 @@ bashio::config.exists() {
     return 0
   fi
 
-    if [ -n "$file" ] && [ -f "$file" ] && command -v jq > /dev/null 2>&1; then
+  if [ -n "$file" ] && [ -f "$file" ] && command -v jq >/dev/null 2>&1; then
-        jq -e --arg k "$key" 'haspath(($k|split(".")))' "$file" > /dev/null 2>&1
+    jq -e --arg k "$key" 'haspath(($k|split(".")))' "$file" >/dev/null 2>&1
     return $?
   fi
 
@@ -297,8 +293,8 @@ bashio::config.array() {
   raw="$(bashio::config "$key")"
   [ -n "$raw" ] || return 0
 
-    if command -v jq > /dev/null 2>&1 && printf '%s' "$raw" | jq -e . > /dev/null 2>&1; then
+  if command -v jq >/dev/null 2>&1 && printf '%s' "$raw" | jq -e . >/dev/null 2>&1; then
-        printf '%s' "$raw" | jq -r '.[]' 2> /dev/null && return 0
+    printf '%s' "$raw" | jq -r '.[]' 2>/dev/null && return 0
   fi
 
   if printf '%s' "$raw" | grep -q ','; then
@@ -323,7 +319,7 @@ bashio::fs.file_exists() { [ -f "${1:-}" ]; }
 bashio::fs.directory_exists() { [ -d "${1:-}" ]; }
 bashio::fs.file_contains() {
   local f="${1:-}" p="${2:-}"
-    [ -f "$f" ] && grep -q -- "$p" "$f" 2> /dev/null
+  [ -f "$f" ] && grep -q -- "$p" "$f" 2>/dev/null
 }
 
 # -----------------------------------------------------------------------------
@@ -340,16 +336,16 @@ bashio::net.wait_for() {
 bashio::dns.host() {
   local h="${1:-}"
   [ -n "$h" ] || return 1
-    if command -v getent > /dev/null 2>&1; then
+  if command -v getent >/dev/null 2>&1; then
     getent ahostsv4 "$h" | awk '{print $1; exit}'
   else
-        nslookup "$h" 2> /dev/null | awk '/^Address: /{print $2; exit}'
+    nslookup "$h" 2>/dev/null | awk '/^Address: /{print $2; exit}'
   fi
 }
 
 # Hostname
 bashio::host.hostname() {
-    command -v hostname > /dev/null 2>&1 && hostname || printf '%s' "${HOSTNAME:-unknown}"
+  command -v hostname >/dev/null 2>&1 && hostname || printf '%s' "${HOSTNAME:-unknown}"
 }
 
 # -----------------------------------------------------------------------------
@@ -360,10 +356,7 @@ bashio::host.hostname() {
 #   bashio::services.available "mqtt"
 bashio::services() {
   local svc="${1:-}" key="${2:-}"
-    [ -n "$svc" ] && [ -n "$key" ] || {
+  [ -n "$svc" ] && [ -n "$key" ] || { printf '%s' ""; return 0; }
-        printf '%s' ""
-        return 0
-    }
 
   local upper svc_upper var v=""
   upper="$(printf '%s' "$key" | tr '[:lower:]' '[:upper:]')"
@@ -376,15 +369,15 @@ bashio::services() {
     MQTT:USERNAME) var="MQTT_USER" ;;
     MQTT:PASSWORD) var="MQTT_PASSWORD" ;;
     MQTT:TLS)      var="MQTT_TLS" ;;
-        MYSQL:HOST | MARIADB:HOST) var="DB_HOST" ;;
+    MYSQL:HOST|MARIADB:HOST)         var="DB_HOST" ;;
-        MYSQL:PORT | MARIADB:PORT) var="DB_PORT" ;;
+    MYSQL:PORT|MARIADB:PORT)         var="DB_PORT" ;;
-        MYSQL:USERNAME | MARIADB:USERNAME) var="DB_USER" ;;
+    MYSQL:USERNAME|MARIADB:USERNAME) var="DB_USER" ;;
-        MYSQL:PASSWORD | MARIADB:PASSWORD) var="DB_PASSWORD" ;;
+    MYSQL:PASSWORD|MARIADB:PASSWORD) var="DB_PASSWORD" ;;
-        MYSQL:DATABASE | MARIADB:DATABASE) var="DB_NAME" ;;
+    MYSQL:DATABASE|MARIADB:DATABASE) var="DB_NAME" ;;
     *) var="${svc_upper}_${upper}" ;;
   esac
 
-    v="$(_bashio_env_get "$var" 2> /dev/null || true)"
+  v="$(_bashio_env_get "$var" 2>/dev/null || true)"
   if [ -z "$v" ]; then
     v="$(_bashio_json_get "services.${svc}.${key}")"
     [ -z "$v" ] && v="$(_bashio_json_get "${svc}.${key}")"
@@ -409,15 +402,15 @@ bashio::cache.set() { printf '%s' "${2:-}" > "$BASHIO_CACHE_DIR/${1}.cache"; }
 # -----------------------------------------------------------------------------
 # jq wrapper (some add-ons call bashio::jq)
 # -----------------------------------------------------------------------------
-bashio::jq() { command -v jq > /dev/null 2>&1 && jq "$@"; }
+bashio::jq() { command -v jq >/dev/null 2>&1 && jq "$@"; }
 
 # -----------------------------------------------------------------------------
 # Home Assistant token
 # -----------------------------------------------------------------------------
 bashio::homeassistant.token() {
   local t="${HOMEASSISTANT_TOKEN:-${HASS_TOKEN:-}}"
-    if [ -z "$t" ] && [ -n "${STANDALONE_OPTIONS_JSON:-}" ] && [ -f "${STANDALONE_OPTIONS_JSON:-}" ] && command -v jq > /dev/null 2>&1; then
+  if [ -z "$t" ] && [ -n "${STANDALONE_OPTIONS_JSON:-}" ] && [ -f "${STANDALONE_OPTIONS_JSON:-}" ] && command -v jq >/dev/null 2>&1; then
-        t="$(jq -er '.homeassistant.token // empty' "$STANDALONE_OPTIONS_JSON" 2> /dev/null || true)"
+    t="$(jq -er '.homeassistant.token // empty' "$STANDALONE_OPTIONS_JSON" 2>/dev/null || true)"
   fi
   printf '%s' "${t:-}"
 }
@@ -426,11 +419,7 @@ bashio::homeassistant.token() {
 # Exit helpers
 # -----------------------------------------------------------------------------
 bashio::exit.ok()  { exit 0; }
-bashio::exit.nok() {
+bashio::exit.nok() { local m="${1:-}"; [ -n "$m" ] && bashio::log.red "$m"; exit 1; }
-    local m="${1:-}"
-    [ -n "$m" ] && bashio::log.red "$m"
-    exit 1
-}
 
 # -----------------------------------------------------------------------------
 # Core config check shim

.templates/ha_autoapps.sh

@@ -41,14 +41,14 @@ restore_apt_sources_if_missing() {
                 mirror="http://ports.ubuntu.com/ubuntu-ports"
                 security_mirror="$mirror"
             fi
-            cat > /etc/apt/sources.list << EOF2
+            cat > /etc/apt/sources.list <<EOF2
 deb ${mirror} ${codename} main restricted universe multiverse
 deb ${mirror} ${codename}-updates main restricted universe multiverse
 deb ${security_mirror} ${codename}-security main restricted universe multiverse
 EOF2
             ;;
         debian)
-            cat > /etc/apt/sources.list << EOF2
+            cat > /etc/apt/sources.list <<EOF2
 deb http://deb.debian.org/debian ${codename} main contrib non-free non-free-firmware
 deb http://deb.debian.org/debian ${codename}-updates main contrib non-free non-free-firmware
 deb http://deb.debian.org/debian-security ${codename}-security main contrib non-free non-free-firmware

.templates/ha_automatic_packages.sh

@@ -184,7 +184,7 @@ done
 if [ "$PACKMANAGER" = "apt" ]; then apt-get update > /dev/null; fi
 if [ "$PACKMANAGER" = "pacman" ]; then pacman -Sy > /dev/null; fi
 if [ "$PACKMANAGER" = "apk" ] && [ -f /etc/apk/repositories ] && ! grep -q "community" /etc/apk/repositories; then
-    ALPINE_VER=$(cat /etc/alpine-release 2> /dev/null | cut -d. -f1,2)
+    ALPINE_VER=$(cat /etc/alpine-release 2>/dev/null | cut -d. -f1,2)
     if [ -n "$ALPINE_VER" ]; then
         echo "https://dl-cdn.alpinelinux.org/alpine/v${ALPINE_VER}/community" >> /etc/apk/repositories
         apk update > /dev/null
@@ -228,7 +228,7 @@ for files in "/etc/services.d" "/etc/cont-init.d"; do
     if ! ls $files 1> /dev/null 2>&1; then continue; fi
 
     # Bashio
-    if grep -q -rnw "${files}" -e 'bashio' 2> /dev/null && [ ! -f "/usr/bin/bashio" ]; then
+    if grep -q -rnw "${files}" -e 'bashio' 2>/dev/null && [ ! -f "/usr/bin/bashio" ]; then
         [ "$VERBOSE" = true ] && echo "install bashio"
         BASHIO_VERSION="v0.17.5"
         mkdir -p /tmp/bashio

.templates/ha_entrypoint.sh

@@ -10,12 +10,60 @@ if [ "$$" -eq 1 ]; then
   PID1=true
   echo "Starting as entrypoint"
   if [ -d /command ]; then
-        ln -sf /command/* /usr/bin/ 2> /dev/null || true
+    ln -sf /command/* /usr/bin/ 2>/dev/null || true
   fi
 else
   echo "Starting custom scripts"
 fi
 
+##########################################
+# Install the stop handler               #
+##########################################
+
+# As namespace PID 1 -- which is what "init: false" makes this script -- the kernel
+# discards any signal whose handler is still SIG_DFL. Installed at the end of startup,
+# as it used to be, the handler missed every stop that arrived while the Supervisor
+# probe or the cont-init chain was still running: Home Assistant waited out the grace
+# period for a SIGKILL and reported the add-on as failed. Nothing here is interrupted
+# mid-write by the move -- only PID 1 is signalled, and bash runs a trap at a command
+# boundary, so whatever external command is in flight reaps first.
+terminate() {
+  local local_pid
+  # Best-effort, so errexit must not apply: this runs with `set -e` in force (validate_shebang
+  # leaves it on), and under errexit the first failing command aborts the handler and exits with
+  # its status, skipping the child-kill loop and the `exit 0` below. Every command in the body
+  # here is already guarded, but add-ons patch this function at build time -- postgres_15 and
+  # postgres_17 sed an unguarded `pg_ctl ... stop` in right after the echo -- and that command
+  # fails whenever the stop arrives before the database is up.
+  set +e
+  echo "Termination signal received, forwarding to subprocesses..."
+  if command -v pgrep >/dev/null 2>&1; then
+    while read -r pid; do
+      [ -n "$pid" ] || continue
+      echo "Terminating child PID $pid"
+      kill -TERM "$pid" 2>/dev/null || echo "Failed to terminate PID $pid"
+    done < <(pgrep -P "$$" || true)
+  else
+    for p in /proc/[0-9]*/; do
+      local_pid="${p#/proc/}"
+      local_pid="${local_pid%/}"
+      if [ "$local_pid" -ne 1 ] && grep -q "^PPid:[[:space:]]*$$" "/proc/$local_pid/status" 2>/dev/null; then
+        echo "Terminating child PID $local_pid"
+        kill -TERM "$local_pid" 2>/dev/null || echo "Failed to terminate PID $local_pid"
+      fi
+    done
+  fi
+  wait || true
+  echo "All subprocesses terminated. Exiting."
+  exit 0
+}
+
+# Only when this script is PID 1. Under Docker's own init the entrypoint is an ordinary
+# child and the signal handling above belongs to that init, not to us.
+if $PID1; then
+  trap terminate SIGTERM SIGINT
+fi
+
 ##########################################
 # Pick an exec-capable directory         #
 ##########################################
@@ -28,20 +76,14 @@ pick_exec_dir() {
     if [ -d "$d" ] && [ -w "$d" ]; then
       # Create a tiny test executable to confirm "exec" works
       local t="${d%/}/.exec_test_$$"
-            printf '#!/bin/sh\necho ok\n' > "$t" 2> /dev/null || {
+      printf '#!/bin/sh\necho ok\n' >"$t" 2>/dev/null || { rm -f "$t" 2>/dev/null || true; continue; }
-                rm -f "$t" 2> /dev/null || true
+      chmod 700 "$t" 2>/dev/null || { rm -f "$t" 2>/dev/null || true; continue; }
-                continue
+      if "$t" >/dev/null 2>&1; then
-            }
+        rm -f "$t" 2>/dev/null || true
-            chmod 700 "$t" 2> /dev/null || {
-                rm -f "$t" 2> /dev/null || true
-                continue
-            }
-            if "$t" > /dev/null 2>&1; then
-                rm -f "$t" 2> /dev/null || true
         echo "$d"
         return 0
       fi
-            rm -f "$t" 2> /dev/null || true
+      rm -f "$t" 2>/dev/null || true
     fi
   done
   return 1
@@ -115,7 +157,7 @@ validate_shebang() {
   local errfile msg
 
   # shellcheck disable=SC2206
-    local cmd=($candidate)
+  local cmd=( $candidate )
   local exe="${cmd[0]}"
 
   if [ ! -x "$exe" ]; then
@@ -128,18 +170,18 @@ validate_shebang() {
   {
     printf '#!%s\n' "$candidate"
     printf '%s\n' "$probe_script_content"
-    } > "$tmp"
+  } >"$tmp"
-    chmod 700 "$tmp" 2> /dev/null || true
+  chmod 700 "$tmp" 2>/dev/null || true
 
   set +e
-    out="$("$tmp" 2> "$errfile")"
+  out="$("$tmp" 2>"$errfile")"
   rc=$?
   set -e
 
-    rm -f "$tmp" 2> /dev/null || true
+  rm -f "$tmp" 2>/dev/null || true
 
   if [ "$rc" -eq 0 ] && [ -n "${out:-}" ] && [ "$out" != "null" ]; then
-        rm -f "$errfile" 2> /dev/null || true
+    rm -f "$errfile" 2>/dev/null || true
     return 0
   fi
 
@@ -151,7 +193,7 @@ validate_shebang() {
     msg+=$'   stderr: <empty>\n'
   fi
   SHEBANG_ERRORS+=("$msg")
-    rm -f "$errfile" 2> /dev/null || true
+  rm -f "$errfile" 2>/dev/null || true
   return 1
 }
 
@@ -215,14 +257,14 @@ if $PID1 && { [ -x /command/with-contenv ] || [ -x /usr/bin/with-contenv ]; }; t
   # accepts a surviving symlink-to-directory and would let the dump follow it. rm does not traverse
   # a symlink, but it would empty anything bind-mounted at this exact path -- not a configuration
   # any add-on uses, and not one s6 would tolerate either.
-    if rm -rf "$S6_CONTAINER_ENV" "$S6_CONTAINER_ENV.tmp" && mkdir -p "$S6_CONTAINER_ENV.tmp" \
+  if rm -rf "$S6_CONTAINER_ENV" "$S6_CONTAINER_ENV.tmp" && mkdir -p "$S6_CONTAINER_ENV.tmp" &&
-        && s6-dumpenv -- "$S6_CONTAINER_ENV.tmp" && mv "$S6_CONTAINER_ENV.tmp" "$S6_CONTAINER_ENV"; then
+    s6-dumpenv -- "$S6_CONTAINER_ENV.tmp" && mv "$S6_CONTAINER_ENV.tmp" "$S6_CONTAINER_ENV"; then
     echo "Populated $S6_CONTAINER_ENV for with-contenv"
   else
     # Leaves the directory absent, which is exactly how this fails today -- so the failure mode is
     # unchanged, not newly degraded. Never fatal, a read-only /run must still let the add-on boot,
     # but never silent either, since the shebang failure it leaves behind says nothing on its own.
-        rm -rf "$S6_CONTAINER_ENV" "$S6_CONTAINER_ENV.tmp" 2> /dev/null || true
+    rm -rf "$S6_CONTAINER_ENV" "$S6_CONTAINER_ENV.tmp" 2>/dev/null || true
     echo -e "\e[38;5;214m$(date) WARNING: could not populate $S6_CONTAINER_ENV; scripts with a with-contenv shebang will fail at their shebang, as they did before this was attempted\e[0m"
   fi
 fi
@@ -283,7 +325,7 @@ wait_for_supervisor() {
   [ -n "${SUPERVISOR_TOKEN:-}" ] || return 0
   [ "${BASHIO_LIB_FULL:-false}" = "true" ] || return 0
   # bashio's own curl carries no --max-time, so each attempt is bounded from the outside.
-    command -v timeout > /dev/null 2>&1 || return 0
+  command -v timeout >/dev/null 2>&1 || return 0
   # Digits only, then forced to base 10: `test -gt` accepts a zero-padded override like 08, but
   # arithmetic expansion reads it as octal and fails, which would leave the deadline empty and
   # spin the loop below forever.
@@ -311,7 +353,7 @@ wait_for_supervisor() {
     # logging is dropped because a failed attempt here is expected, not news.
     # shellcheck disable=SC2016
     if timeout "$attempt" bash -c '. "$1" && [ -n "$(bashio::addon.ip_address)" ]' \
-            _ "$BASHIO_LIB" > /dev/null 2>&1; then
+      _ "$BASHIO_LIB" >/dev/null 2>&1; then
       [ "$announced" -eq 0 ] || echo "Supervisor API ready after $((SECONDS - started))s"
       return 0
     fi
@@ -363,7 +405,7 @@ run_one_script() {
       _run_rc=0
       (
         # shellcheck disable=SC1090
-                . "$BASHIO_LIB" 2> /dev/null || true
+        . "$BASHIO_LIB" 2>/dev/null || true
         # shellcheck disable=SC1090
         . "$script"
       ) || _run_rc=$?
@@ -403,7 +445,7 @@ if $PID1; then
           _svc_rc=0
           (
             # shellcheck disable=SC1090
-                        . "$BASHIO_LIB" 2> /dev/null || true
+            . "$BASHIO_LIB" 2>/dev/null || true
             # shellcheck disable=SC1090
             . "$runfile"
           ) || _svc_rc=$?
@@ -434,31 +476,6 @@ if $PID1; then
   echo " "
   echo -e "\033[0;32mEverything started!\033[0m"
 
-    terminate() {
-        local local_pid
-        echo "Termination signal received, forwarding to subprocesses..."
-        if command -v pgrep > /dev/null 2>&1; then
-            while read -r pid; do
-                [ -n "$pid" ] || continue
-                echo "Terminating child PID $pid"
-                kill -TERM "$pid" 2> /dev/null || echo "Failed to terminate PID $pid"
-            done < <(pgrep -P "$$" || true)
-        else
-            for p in /proc/[0-9]*/; do
-                local_pid="${p#/proc/}"
-                local_pid="${local_pid%/}"
-                if [ "$local_pid" -ne 1 ] && grep -q "^PPid:[[:space:]]*$$" "/proc/$local_pid/status" 2> /dev/null; then
-                    echo "Terminating child PID $local_pid"
-                    kill -TERM "$local_pid" 2> /dev/null || echo "Failed to terminate PID $local_pid"
-                fi
-            done
-        fi
-        wait || true
-        echo "All subprocesses terminated. Exiting."
-        exit 0
-    }
-
-    trap terminate SIGTERM SIGINT
   while :; do
     sleep infinity &
     wait $!

CLAUDE.md

@@ -147,7 +147,7 @@ manual actions with precedence. Prompts live in `.github/prompts/`, shared shell
 in `.github/scripts/`.
 
 | Workflow | Model | Trigger | Role |
-| --- | --- | --- | --- |
+|---|---|---|---|
 | `on_issues_ai_triage.yaml` | Sonnet-low | issue opened (+ author reply, daily catch-up) | Tier 1: classify, dedupe, answer, ask for info; label `ai-triage` for real add-on bugs |
 | `daily_ai_fix.yaml` | Opus 5-xhigh | daily 03:00 | Tier 2: diagnose the `ai-triage` batch; small+confident → ready PR (`ai:fixed`); else write a plan (`ai:plan-pending`) |
 | `on_issue_approved.yaml` | Opus 5-high | maintainer adds `ai:approved` | Tier 3: execute the approved plan → ready PR |
@@ -176,7 +176,7 @@ prompt-only, not machine-enforced.
 ## Linting Rules
 
 | Tool | Config | Key ignores |
-| ------ | -------- | ------------ |
+|------|--------|------------|
 | Hadolint | `.hadolint.yaml` | DL3002, DL3006-9, DL3018 (no pinning required) |
 | ShellCheck | `.shellcheckrc` | SC2002 |
 | Markdownlint | `.markdownlint.yaml` | MD013 (line length), MD025, MD033, MD041 |

addons_updater/README.md

@@ -75,7 +75,7 @@ You can add the following tags in the file :
 
 ### Addon version numbering
 
-The `version` written in the addon `config.yaml` is the one Home Assistant compares to decide whether an update is available. Home Assistant hides the update when it can order both versions and the new one is not strictly newer (`1.2.3` -> `1.2.3-2` is a semver pre-release, so it is _older_), and it cannot order tags such as `version-bf9e0b4f` or `ubuntu-2026-06-01` at all.
+The `version` written in the addon `config.yaml` is the one Home Assistant compares to decide whether an update is available. Home Assistant hides the update when it can order both versions and the new one is not strictly newer (`1.2.3` -> `1.2.3-2` is a semver pre-release, so it is *older*), and it cannot order tags such as `version-bf9e0b4f` or `ubuntu-2026-06-01` at all.
 
 The addon version is therefore derived from the upstream tag:
 

aurral/README.md

@@ -6,7 +6,7 @@ This addon is based on the docker image <https://github.com/lklynet/aurral>
 ## Configuration
 
 | Option | Default | Description |
-| --- | --- | --- |
+|---|---|---|
 | `download_folder` | `/share/aurral/downloads` | Path where Aurral writes flow downloads. Must be under `/share`. |
 | `weekly_flow_folder` | `weekly-flow` | Subfolder name appended to `download_folder` for weekly flow files. The full path will be `download_folder/weekly_flow_folder`. |
 

autobrr/README.md

@@ -67,7 +67,7 @@ Default credentials: `admin` / `password` (change after first login).
 ### Options
 
 | Option | Type | Default | Description |
-| -------- | ------ | --------- | ------------- |
+|--------|------|---------|-------------|
 | `PGID` | int | `0` | Group ID for file permissions |
 | `PUID` | int | `0` | User ID for file permissions |
 | `TZ` | str | | Timezone (e.g., `Europe/London`) |

bazarr/README.md

@@ -44,7 +44,7 @@ Configurations can be done through the app webUI, except for the following optio
 ### Options
 
 | Option | Type | Default | Description |
-| -------- | ------ | --------- | ------------- |
+|--------|------|---------|-------------|
 | `PGID` | int | `0` | Group ID for file permissions |
 | `PUID` | int | `0` | User ID for file permissions |
 | `TZ` | str | | Timezone (e.g., `Europe/London`) |

bentopdf/README.md

@@ -17,7 +17,7 @@ A privacy-first PDF toolkit running entirely in your browser — no uploads, no
 ### Organize & Edit
 
 | Tool | Tool | Tool |
-| ------ | ------ | ------ |
+|------|------|------|
 | Merge PDF | Split PDF | Organize PDF |
 | Delete Pages | Extract Pages | Reverse Pages |
 | Rotate PDF | Rotate Custom | Crop PDF |
@@ -28,7 +28,7 @@ A privacy-first PDF toolkit running entirely in your browser — no uploads, no
 ### Convert TO PDF
 
 | Tool | Tool | Tool |
-| ------ | ------ | ------ |
+|------|------|------|
 | Word to PDF | Excel to PDF | PowerPoint to PDF |
 | Image to PDF | JPG to PDF | PNG to PDF |
 | BMP to PDF | TIFF to PDF | WEBP to PDF |
@@ -44,7 +44,7 @@ A privacy-first PDF toolkit running entirely in your browser — no uploads, no
 ### Convert FROM PDF
 
 | Tool | Tool | Tool |
-| ------ | ------ | ------ |
+|------|------|------|
 | PDF to DOCX | PDF to Excel | PDF to JPG |
 | PDF to PNG | PDF to BMP | PDF to TIFF |
 | PDF to WEBP | PDF to SVG | PDF to Text |
@@ -54,7 +54,7 @@ A privacy-first PDF toolkit running entirely in your browser — no uploads, no
 ### Security & Metadata
 
 | Tool | Tool | Tool |
-| ------ | ------ | ------ |
+|------|------|------|
 | Encrypt PDF | Decrypt PDF | Change Permissions |
 | Remove Restrictions | Sign PDF | Digital Sign PDF |
 | Validate Signature | Edit Metadata | View Metadata |
@@ -64,7 +64,7 @@ A privacy-first PDF toolkit running entirely in your browser — no uploads, no
 ### Enhance & Process
 
 | Tool | Tool | Tool |
-| ------ | ------ | ------ |
+|------|------|------|
 | Compress PDF | OCR PDF | Deskew PDF |
 | Rasterize PDF | Linearize PDF | PDF to PDF/A |
 | Adjust Colors | Invert Colors | Text Color |
@@ -76,7 +76,7 @@ A privacy-first PDF toolkit running entirely in your browser — no uploads, no
 ### Forms & More
 
 | Tool | Tool | Tool |
-| ------ | ------ | ------ |
+|------|------|------|
 | Form Creator | Form Filler | Table of Contents |
 | Bookmark | PDF Editor | Extract Images |
 | Extract Tables | Extract Attachments | Edit Attachments |

birdnet-go-dev/CHANGELOG.md

@@ -1,3 +1,25 @@
+## 20260909.7 (10-09-2026)
+- Correct the "first daily detection consensus" README section (review feedback on PR #3056): a merged-upstream setting stays in the build rather than disappearing, every attempt for a species is held back until one is accepted rather than only the first, and the "known to every active bird model" exemption is scoped per audio source, matching the implementation.
+## 20260909.6 (10-09-2026)
+- Document the fork-only "first daily detection consensus" setting (alexbelgium/birdnet-go#63): requires a second model to confirm each bird species' first detection of the day. Off by default; no behaviour change unless enabled.
+## 20260909.5 (09-09-2026)
+- Minor bugs fixed
+## 20260909.4 (09-09-2026)
+- Minor bugs fixed
+## 20260909.3 (09-09-2026)
+- Minor bugs fixed
+## 20260909.2 (09-09-2026)
+- Minor bugs fixed
+## 20260909 (09-09-2026)
+- Minor bugs fixed
+## 20260908.2 (08-09-2026)
+- Minor bugs fixed
+## 20260908.1 (08-09-2026)
+- Synced with upstream birdnet-go (4 commits); re-merges the open fork PRs, adding fork PR #62 (reanalyze a clip with every loaded model + one-click correction)
+## 20260908 (08-09-2026)
+- Synced with upstream birdnet-go (7 commits); re-merges the open fork PRs
+## 20260907 (07-09-2026)
+- Rebuild: re-merges the open fork PRs, picking up the updated fork PR #57
 ## 20260901.4 (01-09-2026)
 - Minor bugs fixed
 ## 20260901.3 (01-09-2026)

birdnet-go-dev/README.md

@@ -1,6 +1,6 @@
 # Home assistant add-on: Birdnet-Go (from source)
 
-> **⚠️ Test build.** This is a special variant of the [standard birdnet-go add-on](https://github.com/alexbelgium/hassio-addons/tree/master/birdnet-go). Instead of pulling the prebuilt `ghcr.io/tphakala/birdnet-go` image, it **compiles BirdNET-Go from the [`alexbelgium/birdnet-go`](https://github.com/alexbelgium/birdnet-go) fork**. At build time it syncs the fork's `main` with the `tphakala/birdnet-go` upstream and **merges every open non-draft ("in review") pull request on the fly** (see [`merge-prs.sh`](./merge-prs.sh)), so the binary reflects upstream main plus all work currently under review. Everything below is identical to the standard add-on.
+> **⚠️ Test build.** This is a special variant of the [standard birdnet-go add-on](https://github.com/alexbelgium/hassio-addons/tree/master/birdnet-go). Instead of pulling the prebuilt `ghcr.io/tphakala/birdnet-go` image, it **compiles BirdNET-Go from the [`alexbelgium/birdnet-go`](https://github.com/alexbelgium/birdnet-go) fork**. At build time it syncs the fork's `main` with the `tphakala/birdnet-go` upstream and **merges every open non-draft ("in review") pull request on the fly** (see [`merge-prs.sh`](./merge-prs.sh)), so the binary reflects upstream main plus all work currently under review. Everything below is identical to the standard add-on, except the fork-only settings listed under [Fork-only settings](#fork-only-settings).
 
 
 
@@ -65,6 +65,38 @@ Additional variables can be configured using the config.yaml file found in /conf
 - Config_env.yaml
 Additional environment variables can be configured there
 
+### Fork-only settings
+
+These are currently fork-only settings from the [`alexbelgium/birdnet-go`](https://github.com/alexbelgium/birdnet-go) fork and are **not** in the standard add-on. [`merge-prs.sh`](./merge-prs.sh) syncs the fork's `main` with upstream before applying open PRs, so once a PR merges upstream the setting stays in this build — it just arrives via that sync instead of the PR-merge step, and stops being fork-only. Only a PR that is **closed without merging** drops its setting from later builds.
+
+#### First daily detection consensus
+
+Requires a second model to confirm the **first** detection of each bird species each day. Until one is accepted, every attempt for that species is held to the same two-model bar; only once a detection clears it does every later detection that day behave exactly as it does today, on a single model.
+
+The first detection of a species in a day is the weakest evidence the pipeline produces, and it is the one that creates a "new species today" entry. Asking two models to agree on just that one detection removes most spurious new-species entries without slowing anything else down.
+
+**Off by default.** Turn it on in the web UI under *Settings → Filters → First Daily Detection Consensus*, or in `config.yaml`:
+
+```yaml
+realtime:
+  firstdailyconsensus:
+    enabled: true
+```
+
+The setting is re-read on each detection cycle, so it takes effect without restarting the add-on.
+
+It deliberately does **nothing** in these cases, all of which keep today's single-model behaviour:
+
+- you run only one bird model (the default) — a second opinion does not exist, so the rule can never trigger
+- the species is not a bird — bats and the non-bird sound classes Perch reports (insects, amphibians, mammals, `power_tool`, and so on)
+- the species is not known to *every* active bird model analyzing that audio source — a species only one of them can name could never reach two confirmations. With several sources running different model combinations, this is decided per source, not add-on-wide
+- a dynamic threshold has actually lowered the bar for that species, meaning you asked for a more permissive gate
+- the taxonomy or the database cannot be consulted — it fails open and accepts the detection
+
+In practice it only bites when a single audio source has two or more bird models (for example BirdNET plus Perch) analyzing it, on species all of them can identify. The trade is fewer false new-species entries, at the cost of occasionally delaying a genuine first sighting until a second model agrees.
+
+Requires [alexbelgium/birdnet-go#63](https://github.com/alexbelgium/birdnet-go/pull/63).
+
 ### MQTT and MariaDB auto-configuration (opt-in)
 
 If the Home Assistant **MQTT** addon is installed and running and you set `mqtt_auto_config: true` in the addon options, the addon writes the HA Mosquitto credentials directly into BirdNET-Go's `config.yaml` on every startup: `realtime.mqtt.enabled`, `broker`, `username`, and `password` are populated, and the topic defaults to `birdnet`. In addition, it enables BirdNET-Go's **native Home Assistant MQTT auto-discovery** (`realtime.mqtt.homeassistant.enabled`), so the detection sensors show up in Home Assistant automatically — **no manual MQTT sensor YAML required** (the hand-written sensors in [HAINTEGRATION.md](./HAINTEGRATION.md) remain available if you prefer to build your own). Messages are also retained (`realtime.mqtt.retain: true`) so sensor states survive Home Assistant restarts. When the option is `false` (the default), the addon still logs the broker details and reminds you about the option whenever Mosquitto is detected — nothing is written.

birdnet-go-dev/config.yaml

@@ -127,5 +127,5 @@ slug: birdnet-go-dev
 udev: true
 url: https://github.com/alexbelgium/hassio-addons
 usb: true
-version: "20260901.4"
+version: "20260909.7"
 video: true

birdnet-go-dev/merge-prs.sh

@@ -11,6 +11,15 @@
 # stamping) is written to the directory given as $1 so the Docker build can
 # compile it.
 #
+# With --check the script does not build anything: it performs the exact same
+# merge sequence, skips (instead of failing on) every conflicting PR, and prints
+# one "!!! CONFLICT pr=#N conflicts-with=... files=... " line per offender before
+# exiting 2. Use it to find conflicts *before* a build burns on them. This is a
+# different question from GitHub's `mergeable` field, which compares a PR against
+# its own base ref - for a stacked PR that base is another feature branch (often
+# stale, sometimes belonging to a closed PR), so GitHub can report CLEAN for a PR
+# that does not merge onto main at all.
+#
 # Environment:
 #   BIRDNET_FORK       owner/repo of the fork           (default alexbelgium/birdnet-go)
 #   BIRDNET_UPSTREAM   owner/repo of the upstream        (default tphakala/birdnet-go)
@@ -19,7 +28,26 @@
 #
 set -euo pipefail
 
-TARGET_DIR="${1:?usage: merge-prs.sh <target-dir>}"
+CHECK_ONLY="${MERGE_PRS_CHECK:-0}"
+TARGET_DIR=""
+while [ "$#" -gt 0 ]; do
+    case "$1" in
+        --check) CHECK_ONLY=1 ;;
+        -*) echo "unknown option: $1" >&2; exit 64 ;;
+        *)
+            # Last-one-wins would silently clone into the wrong directory if a caller ever
+            # appended an argument; the pre-flag script used "${1}", so refuse rather than
+            # quietly change which operand counts.
+            if [ -n "${TARGET_DIR}" ]; then
+                echo "usage: merge-prs.sh [--check] <target-dir>" >&2
+                exit 64
+            fi
+            TARGET_DIR="$1"
+            ;;
+    esac
+    shift
+done
+: "${TARGET_DIR:?usage: merge-prs.sh [--check] <target-dir>}"
 
 FORK="${BIRDNET_FORK:-alexbelgium/birdnet-go}"
 UPSTREAM="${BIRDNET_UPSTREAM:-tphakala/birdnet-go}"
@@ -33,6 +61,52 @@ GH_TOKEN="${GH_TOKEN:-${GITHUB_TOKEN:-}}"
 
 log() { echo ">>> $*"; }
 
+# Conflicting PRs collected in --check mode: "number|scope|files|title".
+conflicting=()
+
+LOCKFILE="frontend/package-lock.json"
+
+# The single place that decides whether a conflicted merge is still acceptable.
+# package-lock.json is generated content and stacked PRs can carry an older copy even when
+# their source changes merge cleanly, so keep the lockfile already assembled on the base side
+# — but only when it is the sole conflict. Any source conflict stays fatal.
+# Returns 0 when it resolved and committed such a merge, 1 when the conflict is real.
+# BOTH the real merge and the --check probe must go through here: when only the real merge
+# applied the policy, the probe called a PR "conflicts-with=main" that the build would have
+# merged fine, and printed the opposite remediation to the true one.
+resolve_sole_lockfile() {
+    local dir="$1"
+    local -a conflicted
+    mapfile -t conflicted < <(git -C "${dir}" diff --name-only --diff-filter=U)
+    if [ "${#conflicted[@]}" -ne 1 ] || [ "${conflicted[0]}" != "${LOCKFILE}" ]; then
+        return 1
+    fi
+    log "Resolving generated ${LOCKFILE} conflict using the base tree"
+    git -C "${dir}" checkout --ours -- "${LOCKFILE}" || return 1
+    git -C "${dir}" add "${LOCKFILE}" || return 1
+    git -C "${dir}" commit --no-edit > /dev/null || return 1
+}
+
+# Does ${1} merge cleanly onto the pristine upstream-synced main? Probed in a
+# throwaway worktree so the accumulated tree is left untouched. Tells apart a PR
+# that is simply stale against main (fixable inside that PR's own branch) from
+# one that only clashes with another open PR (needs a cross-PR decision).
+merges_onto_main() {
+    local sha="$1" tmpdir probe rc=0
+    tmpdir="$(mktemp -d)"
+    probe="${tmpdir}/probe"
+    git worktree add --quiet --detach "${probe}" "${MAIN_SYNCED}"
+    if ! git -C "${probe}" merge --no-edit --no-ff -m probe "${sha}" > /dev/null 2>&1; then
+        # Same policy as the real merge, or this misclassifies a lockfile-only clash.
+        resolve_sole_lockfile "${probe}" > /dev/null 2>&1 || rc=1
+    fi
+    git worktree remove --force "${probe}" > /dev/null 2>&1 || true
+    # worktree remove only takes the child back; without this the mktemp parent is left behind
+    # on every checked conflict.
+    rmdir "${tmpdir}" > /dev/null 2>&1 || true
+    return "${rc}"
+}
+
 git config --global user.email "addon-builder@users.noreply.github.com"
 git config --global user.name "BirdNET-Go Addon Builder"
 git config --global advice.detachedHead false
@@ -47,6 +121,7 @@ git remote add upstream "${UPSTREAM_URL}"
 git fetch --no-tags upstream main
 # --no-ff keeps an explicit sync commit; a no-op when main is already current.
 git merge --no-edit --no-ff upstream/main
+MAIN_SYNCED="$(git rev-parse HEAD)"
 
 log "Querying open non-draft PRs from ${FORK}"
 auth_header=()
@@ -79,27 +154,43 @@ for entry in "${prs[@]}"; do
     if ! git merge --no-edit --no-ff -m "Merge PR #${number}: ${title}" "${sha}"; then
         mapfile -t conflicted_files < <(git diff --name-only --diff-filter=U)
 
-        # package-lock.json is generated content and stacked PRs can carry an
+        if resolve_sole_lockfile .; then
-        # older copy even when their source changes merge cleanly. Keep the
+            : # generated lockfile only - the merge is committed and the build continues
-        # lockfile already assembled from upstream and earlier PRs, but only
-        # when it is the sole conflict. Any source conflict remains fatal.
-        if [ "${#conflicted_files[@]}" -eq 1 ] \
-            && [ "${conflicted_files[0]}" = "frontend/package-lock.json" ]; then
-            log "Resolving generated frontend/package-lock.json conflict using the accumulated tree"
-            git checkout --ours -- frontend/package-lock.json
-            git add frontend/package-lock.json
-            git commit --no-edit
         else
             echo "!!! Merge conflict while merging PR #${number} (${title})." >&2
             if [ "${#conflicted_files[@]}" -gt 0 ]; then
                 printf '!!! Conflicting file: %s\n' "${conflicted_files[@]}" >&2
             fi
-            echo "!!! Resolve the conflict in the fork or pause this PR, then rebuild." >&2
             git merge --abort || true
+
+            if [ "${CHECK_ONLY}" = "1" ]; then
+                scope="accumulated"
+                merges_onto_main "${sha}" || scope="main"
+                conflicting+=("${number}|${scope}|${conflicted_files[*]:-}|${title}")
+                log "check mode: skipping PR #${number}, continuing with the rest"
+                continue
+            fi
+
+            echo "!!! Resolve the conflict in the fork or pause this PR, then rebuild." >&2
             exit 1
         fi
     fi
 done
 
+if [ "${CHECK_ONLY}" = "1" ]; then
+    if [ "${#conflicting[@]}" -eq 0 ]; then
+        log "CHECK OK: every open non-draft PR merges into the combined build tree"
+        exit 0
+    fi
+    echo "!!! CHECK FAILED: ${#conflicting[@]} PR(s) would break the add-on build" >&2
+    for entry in "${conflicting[@]}"; do
+        IFS='|' read -r number scope files title <<<"${entry}"
+        echo "!!! CONFLICT pr=#${number} conflicts-with=${scope} files=${files} title=${title}" >&2
+    done
+    echo "!!! conflicts-with=main     -> the PR is stale against main; merge main into its branch and resolve there." >&2
+    echo "!!! conflicts-with=accumulated -> the PR only clashes with another open PR; decide which one owns the hunk." >&2
+    exit 2
+fi
+
 log "Merged HEAD: $(git rev-parse --short HEAD)"
 log "Source tree ready at ${TARGET_DIR}"

birdnet-go-dev/rootfs/etc/cont-init.d/01-structure.sh

@@ -190,5 +190,5 @@ LOG_DIR="/config/logs"
 if [ -d "$LOG_DIR" ]; then
     bashio::log.info "Trimming log files older than ${LOG_MAX_AGE_DAYS} days in ${LOG_DIR}"
     ln -sf "$LOG_DIR" /logs
-    find "$LOG_DIR" -type f -name "*.log*" -mtime +"$LOG_MAX_AGE_DAYS" -delete 2> /dev/null || true
+    find "$LOG_DIR" -type f -name "*.log*" -mtime +"$LOG_MAX_AGE_DAYS" -delete 2>/dev/null || true
 fi

birdnet-go-dev/rootfs/etc/cont-init.d/33-mariadb.sh

@@ -44,8 +44,8 @@ if ! bashio::config.true 'mariadb_auto_config'; then
         # Only revert if config.yaml points at the HA MariaDB host we would have
         # written — a mysql block pointing at a different host was set manually.
         # shellcheck disable=SC2016
-        CURRENT_MYSQL_HOST="$(yq -r '.output.mysql.host // empty' "$CONFIG_LOCATION" 2> /dev/null || true)"
+        CURRENT_MYSQL_HOST="$(yq -r '.output.mysql.host // empty' "$CONFIG_LOCATION" 2>/dev/null || true)"
-        if yq -e '.output.mysql.enabled == true' "$CONFIG_LOCATION" > /dev/null 2>&1 \
+        if yq -e '.output.mysql.enabled == true' "$CONFIG_LOCATION" >/dev/null 2>&1 \
             && [ "${CURRENT_MYSQL_HOST}" = "${MYSQL_HOST}" ]; then
             yq -i -y \
                 '.output.mysql.enabled = false
@@ -71,7 +71,7 @@ bashio::log.green "---"
 # Resolve MariaDB hostname to IPv4: on HAOS >=17.3 the Supervisor network
 # gained IPv6, but the MariaDB addon only grants its user from the IPv4
 # subnet. Fall back to the raw hostname if resolution fails.
-MYSQL_HOST_RESOLVED="$(getent ahostsv4 "${MYSQL_HOST}" 2> /dev/null | awk '{print $1; exit}')"
+MYSQL_HOST_RESOLVED="$(getent ahostsv4 "${MYSQL_HOST}" 2>/dev/null | awk '{print $1; exit}')"
 MYSQL_HOST_RESOLVED="${MYSQL_HOST_RESOLVED:-${MYSQL_HOST}}"
 if [ "${MYSQL_HOST_RESOLVED}" != "${MYSQL_HOST}" ]; then
     bashio::log.blue "Resolved ${MYSQL_HOST} -> ${MYSQL_HOST_RESOLVED} (forcing IPv4)"

birdnet-go/CHANGELOG.md

@@ -22,8 +22,8 @@
 
 ## nightly-20260615-2 (05-07-2026)
 - Minor bugs fixed
-- Fix detections/database not persisting across restarts on a fresh install: upstream's default `config.yaml` ships `output.sqlite.path: birdnet.db` (relative) explicitly, so the missing-only (`//=`) seeding introduced previously never rewrote it to an absolute path. A relative path resolves against the app's ephemeral working directory, so the database was silently recreated empty on every restart. Any relative `output.sqlite.path` is now rewritten to live under the persistent `/config` on startup; values already set to an absolute path are left untouched. (https://github.com/tphakala/birdnet-go/discussions/3774)
+ - Fix detections/database not persisting across restarts on a fresh install: upstream's default `config.yaml` ships `output.sqlite.path: birdnet.db` (relative) explicitly, so the missing-only (`//=`) seeding introduced previously never rewrote it to an absolute path. A relative path resolves against the app's ephemeral working directory, so the database was silently recreated empty on every restart. Any relative `output.sqlite.path` is now rewritten to live under the persistent `/config` on startup; values already set to an absolute path are left untouched. (https://github.com/tphakala/birdnet-go/discussions/3774)
-- MQTT auto-config now also enables BirdNET-Go's native Home Assistant MQTT auto-discovery: detection sensors appear in Home Assistant automatically with no manual YAML (existing UI/config.yaml edits are preserved)
+ - MQTT auto-config now also enables BirdNET-Go's native Home Assistant MQTT auto-discovery: detection sensors appear in Home Assistant automatically with no manual YAML (existing UI/config.yaml edits are preserved)
 - MQTT auto-config seeds `realtime.mqtt.retain: true` (only when unset) so sensor states survive Home Assistant restarts
 - Added supervisor watchdog (tcp://[HOST]:[PORT:8080]) so the add-on is automatically restarted if BirdNET-Go stops responding
 - Added backup_exclude for rotated logs, making Home Assistant backups smaller (SQLite journals are kept so hot backups stay consistent)

birdnet-go/rootfs/etc/cont-init.d/01-structure.sh

@@ -186,5 +186,5 @@ LOG_DIR="/config/logs"
 if [ -d "$LOG_DIR" ]; then
     bashio::log.info "Trimming log files older than ${LOG_MAX_AGE_DAYS} days in ${LOG_DIR}"
     ln -sf "$LOG_DIR" /logs
-    find "$LOG_DIR" -type f -name "*.log*" -mtime +"$LOG_MAX_AGE_DAYS" -delete 2> /dev/null || true
+    find "$LOG_DIR" -type f -name "*.log*" -mtime +"$LOG_MAX_AGE_DAYS" -delete 2>/dev/null || true
 fi

birdnet-pi-zach/DOCS.md

@@ -9,9 +9,9 @@ Here are some example tests I did (the whole threads are really interesting also
 
 **My recommendation:**
 
-- **Best entry system (< 50 €):** Boya By-lm40 (30 €) + deadcat (10 €)
+- **Best entry system (< 50 €):** Boya By-lm40 (30 €) + deadcat (10 €)
-- **Best middle end system (< 150 €):** Clippy EM272 TRS/TRRS (55 €) + Rode AI micro trs/trrs to usb (70 €) + Rycote deadcat (27 €)
+- **Best middle end system (< 150 €):** Clippy EM272 TRS/TRRS (55 €) + Rode AI micro trs/trrs to usb (70 €) + Rycote deadcat (27 €)
-- **Best high end system (<400 €):** Clippy EM272 XLR (85 €) or LOM Ucho Pro (75 €) + Focusrite Scarlet 2i2 4th Gen (200 €) + Bubblebee Pro Extreme deadcat (45 €)
+- **Best high end system (<400 €):** Clippy EM272 XLR (85 €) or LOM Ucho Pro (75 €) + Focusrite Scarlet 2i2 4th Gen (200 €) + Bubblebee Pro Extreme deadcat (45 €)
 
 **Sources for high end microphones in Europe:**
 

birdnet-pi-zach/rootfs/helpers/birdnet_to_mqtt.py

@@ -112,7 +112,6 @@ def automatic_mqtt_publish(file, detection, path):
         mqttc.publish(mqtt_topic, json_bird, 1)
         log.info("Posted to MQTT: ok")
 
-
 # Create MQTT client using legacy callback API when available for
 # compatibility with paho-mqtt >= 2.0
 callback_api = getattr(mqtt, "CallbackAPIVersion", None)

birdnet-pi/DOCS.md

@@ -9,9 +9,9 @@ Here are some example tests I did (the whole threads are really interesting also
 
 **My recommendation:**
 
-- **Best entry system (< 50 €):** Boya By-lm40 (30 €) + deadcat (10 €)
+- **Best entry system (< 50 €):** Boya By-lm40 (30 €) + deadcat (10 €)
-- **Best middle end system (< 150 €):** Clippy EM272 TRS/TRRS (55 €) + Rode AI micro trs/trrs to usb (70 €) + Rycote deadcat (27 €)
+- **Best middle end system (< 150 €):** Clippy EM272 TRS/TRRS (55 €) + Rode AI micro trs/trrs to usb (70 €) + Rycote deadcat (27 €)
-- **Best high end system (<400 €):** Clippy EM272 XLR (85 €) or LOM Ucho Pro (75 €) + Focusrite Scarlet 2i2 4th Gen (200 €) + Bubblebee Pro Extreme deadcat (45 €)
+- **Best high end system (<400 €):** Clippy EM272 XLR (85 €) or LOM Ucho Pro (75 €) + Focusrite Scarlet 2i2 4th Gen (200 €) + Bubblebee Pro Extreme deadcat (45 €)
 
 **Sources for high end microphones in Europe:**
 

birdnet-pi/rootfs/helpers/birdnet_to_mqtt.py

@@ -112,7 +112,6 @@ def automatic_mqtt_publish(file, detection, path):
         mqttc.publish(mqtt_topic, json_bird, 1)
         log.info("Posted to MQTT: ok")
 
-
 # Create MQTT client using legacy callback API when available for
 # compatibility with paho-mqtt >= 2.0
 callback_api = getattr(mqtt, "CallbackAPIVersion", None)

birdnet-pipy/config.yaml

@@ -73,7 +73,7 @@ map:
 name: BirdNET-PiPy
 options:
   env_vars: []
-  ICECAST_PASSWORD: ""
+  ICECAST_PASSWORD: ''
   data_location: /config/data
 panel_icon: mdi:bird
 ports:

birdnet-pipy/rootfs/etc/cont-init.d/01-structure.sh

@@ -7,7 +7,7 @@ DATA_LOCATION="$(bashio::config 'data_location' || true)"
 DATA_LOCATION="${DATA_LOCATION:-$DEFAULT_LOCATION}"
 
 case "${DATA_LOCATION}" in
-    /config/* | /share/* | /data/*) ;;
+  /config/*|/share/*|/data/*) ;;
   *)
     bashio::log.warning "Invalid data_location '${DATA_LOCATION}', falling back to ${DEFAULT_LOCATION}"
     DATA_LOCATION="${DEFAULT_LOCATION}"
@@ -19,11 +19,11 @@ LEGACY2="/data"
 
 mkdir -p "${DATA_LOCATION}"
 
-if [ -z "$(ls -A "${DATA_LOCATION}" 2> /dev/null || true)" ]; then
+if [ -z "$(ls -A "${DATA_LOCATION}" 2>/dev/null || true)" ]; then
-    if [ -d "${LEGACY1}" ] && [ -n "$(ls -A "${LEGACY1}" 2> /dev/null || true)" ]; then
+  if [ -d "${LEGACY1}" ] && [ -n "$(ls -A "${LEGACY1}" 2>/dev/null || true)" ]; then
     bashio::log.notice "Migrating legacy data from ${LEGACY1} to ${DATA_LOCATION}"
     cp -a "${LEGACY1}/." "${DATA_LOCATION}/" || true
-    elif [ -d "${LEGACY2}" ] && [ "${LEGACY2}" != "${DATA_LOCATION}" ] && [ -n "$(ls -A "${LEGACY2}" 2> /dev/null || true)" ]; then
+  elif [ -d "${LEGACY2}" ] && [ "${LEGACY2}" != "${DATA_LOCATION}" ] && [ -n "$(ls -A "${LEGACY2}" 2>/dev/null || true)" ]; then
     bashio::log.notice "Migrating legacy data from ${LEGACY2} to ${DATA_LOCATION}"
     cp -a "${LEGACY2}/." "${DATA_LOCATION}/" || true
   fi

birdnet-pipy/rootfs/etc/cont-init.d/15-audio_perms.sh

@@ -3,20 +3,20 @@
 set -euo pipefail
 
 SND_GID=""
-if [ -e /dev/snd ] && command -v stat > /dev/null 2>&1; then
+if [ -e /dev/snd ] && command -v stat >/dev/null 2>&1; then
-    SND_GID="$(stat -c '%g' /dev/snd 2> /dev/null || true)"
+  SND_GID="$(stat -c '%g' /dev/snd 2>/dev/null || true)"
 fi
 
-if [ -n "${SND_GID}" ] && getent group audio > /dev/null 2>&1; then
+if [ -n "${SND_GID}" ] && getent group audio >/dev/null 2>&1; then
   current_gid="$(getent group audio | cut -d: -f3 || true)"
   if [ -n "${current_gid}" ] && [ "${current_gid}" != "${SND_GID}" ]; then
-        groupmod -g "${SND_GID}" audio 2> /dev/null || true
+    groupmod -g "${SND_GID}" audio 2>/dev/null || true
   fi
 fi
 
 for u in root nginx www-data icecast2; do
-    if id "${u}" > /dev/null 2>&1; then
+  if id "${u}" >/dev/null 2>&1; then
-        usermod -aG audio "${u}" 2> /dev/null || true
+    usermod -aG audio "${u}" 2>/dev/null || true
   fi
 done
 
@@ -30,7 +30,7 @@ if [ -n "${PULSE_SOCK}" ] && [ -S "${PULSE_SOCK}" ] && [ ! -S /run/pulse/native
 fi
 
 # Copy PulseAudio cookie for the icecast2 user so it can authenticate
-if id icecast2 > /dev/null 2>&1; then
+if id icecast2 >/dev/null 2>&1; then
   ICECAST_HOME="$(getent passwd icecast2 | cut -d: -f6)"
   if [ -n "${ICECAST_HOME}" ]; then
     for cookie in /config/.config/pulse/cookie /root/.config/pulse/cookie; do

bitwarden/rootfs/etc/s6-overlay/s6-rc.d/vaultwarden/run

@@ -21,19 +21,19 @@ export ROCKET_SECRET_KEY="${secret_key}"
 # Find the matching log level
 if bashio::config.has_value 'log_level'; then
     case "$(bashio::string.lower "$(bashio::config 'log_level')")" in
-        all | trace)
+        all|trace)
             log_level="trace"
             ;;
         debug)
             log_level="debug"
             ;;
-        info | notice)
+        info|notice)
             log_level="info"
             ;;
         warning)
             log_level="warn"
             ;;
-        error | fatal)
+        error|fatal)
             log_level="error"
             ;;
         off)

booksonic_air/README.md

@@ -64,7 +64,7 @@ Default credentials are shown in the startup logs.
 ### Options
 
 | Option | Type | Default | Description |
-| -------- | ------ | --------- | ------------- |
+|--------|------|---------|-------------|
 | `PGID` | int | `0` | Group ID for file permissions |
 | `PUID` | int | `0` | User ID for file permissions |
 | `TZ` | str | | Timezone (e.g., `Europe/London`) |

browser_chromium/rootfs/etc/cont-init.d/20-folders.sh

@@ -7,6 +7,7 @@ set -e
 PUID=$(bashio::config "PUID")
 PGID=$(bashio::config "PGID")
 
+
 # Create cache
 #mkdir -p /.cache
 #chmod 755 /.cache

browser_chromium/rootfs/etc/usr/bin/wrapped-chromium

@@ -42,7 +42,7 @@ args=(
 
 # Container reality: sandbox usually breaks unless seccomp is fully disabled
 if [[ "${seccomp_mode}" != "0" ]]; then
-	args+=(--no-sandbox --test-type)
+  args+=( --no-sandbox --test-type )
 fi
 
 # IMPORTANT:

calibre/README.md

@@ -62,7 +62,7 @@ Please read the upstream container documentation for further info: https://githu
 ### Options
 
 | Option | Type | Default | Description |
-| -------- | ------ | --------- | ------------- |
+|--------|------|---------|-------------|
 | `PGID` | int | `0` | Group ID for file permissions |
 | `PUID` | int | `0` | User ID for file permissions |
 | `TZ` | str | | Timezone (e.g., `Europe/London`) |

calibre_web/README.md

@@ -62,7 +62,7 @@ Default password: admin123
 ### Options
 
 | Option | Type | Default | Description |
-| -------- | ------ | --------- | ------------- |
+|--------|------|---------|-------------|
 | `PGID` | int | `0` | Group ID for file permissions |
 | `PUID` | int | `0` | User ID for file permissions |
 | `TZ` | str | | Timezone (e.g., `Europe/London`) |
@@ -99,7 +99,7 @@ This addon supports mounting both local drives and remote SMB shares:
 
 ### Optional Calibre-Web features
 
-Calibre-Web documents optional extras that a manual installation adds with `pip install calibreweb[metadata]` and similar. **You do not need to install anything here**: the LinuxServer base image this add-on builds on installs Calibre-Web's `requirements.txt` _and_ its full `optional-requirements.txt` into the application's virtualenv, so the gdrive, gmail, goodreads, ldap, oauth, metadata, comics and kobo dependencies are all present already. Running `pip install calibreweb[...]` inside the container is not a supported way to enable them: it installs the PyPI distribution of Calibre-Web over an installation that already has those dependencies, and it can disturb the versions the base image pinned. It is also thrown away, because the Supervisor recreates the add-on container on restart.
+Calibre-Web documents optional extras that a manual installation adds with `pip install calibreweb[metadata]` and similar. **You do not need to install anything here**: the LinuxServer base image this add-on builds on installs Calibre-Web's `requirements.txt` *and* its full `optional-requirements.txt` into the application's virtualenv, so the gdrive, gmail, goodreads, ldap, oauth, metadata, comics and kobo dependencies are all present already. Running `pip install calibreweb[...]` inside the container is not a supported way to enable them: it installs the PyPI distribution of Calibre-Web over an installation that already has those dependencies, and it can disturb the versions the base image pinned. It is also thrown away, because the Supervisor recreates the add-on container on restart.
 
 Optional features are switched on in the Calibre-Web web interface, not in the add-on options, under `Admin` -> `Basic Configuration` -> `Feature Configuration` (for example `Enable Uploads`, `Enable Kobo sync`, `Use Goodreads`).
 

calibre_web/rootfs/etc/cont-init.d/80-configuration.sh

@@ -30,16 +30,16 @@ else
     # duplicates it can leave behind are entries calibre-web skips or already trusts.
     # The column only exists once calibre-web 0.6.27+ has migrated app.db and cont-init runs
     # before calibre-web, so a failure here is not fatal : the next start applies it.
-    trusted_ips_error=$(sqlite3 /config/app.db "update settings set config_reverse_proxy_trusted_ips='127.0.0.1,::1,::ffff:127.0.0.1,172.30.32.0/23,::ffff:172.30.32.0/119,'||coalesce(config_reverse_proxy_trusted_ips,'') where coalesce(config_reverse_proxy_trusted_ips,'') not like '%::ffff:172.30.32.0/119%'" 2>&1) \
+    trusted_ips_error=$(sqlite3 /config/app.db "update settings set config_reverse_proxy_trusted_ips='127.0.0.1,::1,::ffff:127.0.0.1,172.30.32.0/23,::ffff:172.30.32.0/119,'||coalesce(config_reverse_proxy_trusted_ips,'') where coalesce(config_reverse_proxy_trusted_ips,'') not like '%::ffff:172.30.32.0/119%'" 2>&1) ||
-        || bashio::log.warning "Could not set the ingress trusted ip list, it will be applied at next start (${trusted_ips_error})"
+        bashio::log.warning "Could not set the ingress trusted ip list, it will be applied at next start (${trusted_ips_error})"
 
     # Calibre-web autodetects kepubify only while this setting is still NULL. On every install
     # that predates the Dockerfile fix above, that detection already ran, found nothing usable and
     # stored an empty string, so it is never retried. Put an empty value back to NULL and
     # calibre-web detects /opt/kepubify itself when it starts, a few seconds after this runs.
     # A path the user set by hand is not empty and is left alone.
-    kepubify_error=$(sqlite3 /config/app.db "update settings set config_kepubifypath = NULL where config_kepubifypath = ''" 2>&1) \
+    kepubify_error=$(sqlite3 /config/app.db "update settings set config_kepubifypath = NULL where config_kepubifypath = ''" 2>&1) ||
-        || bashio::log.warning "Could not reset the kepubify path, it will be applied at next start (${kepubify_error})"
+        bashio::log.warning "Could not reset the kepubify path, it will be applied at next start (${kepubify_error})"
 fi
 
 bashio::log.info "Default username:password is admin:admin123"

changedetection.io/README.md

@@ -52,7 +52,7 @@ You can add a shortcut pointing to your Changedetection.io instance with the fol
 ### Options
 
 | Option | Type | Default | Description |
-| -------- | ------ | --------- | ------------- |
+|--------|------|---------|-------------|
 | `PGID` | int | `0` | Group ID for file permissions |
 | `PUID` | int | `0` | User ID for file permissions |
 | `TZ` | str | | Timezone (e.g., `Europe/London`) |

claude_desktop/rootfs/defaults/autostart

@@ -55,7 +55,7 @@
 # shared memory into ordinary files for no benefit. If the size cannot be determined, keep the
 # flag — the crash it prevents is worse than the overhead it costs.
 SHM_FLAGS="--disable-dev-shm-usage"
-SHM_KB="$(df -k /dev/shm 2>/dev/null | awk 'NR==2 {print $2}')"
+SHM_KB="$(df -k /dev/shm 2> /dev/null | awk 'NR==2 {print $2}')"
 if [ -n "$SHM_KB" ] && [ "$SHM_KB" -ge 262144 ]; then
     SHM_FLAGS=""
 fi

claude_desktop/rootfs/etc/cont-init.d/81-codex_cli.sh

@@ -141,7 +141,7 @@ release_info=""
 if curl -fsSL --retry 3 --retry-delay 2 --connect-timeout 10 --max-time 30 \
     -o "$release_metadata" "$CODEX_RELEASE_API"; then
     release_info="$(
-        CODEX_ASSET="$CODEX_ASSET" python3 - "$release_metadata" << 'PY' 2> /dev/null || true
+        CODEX_ASSET="$CODEX_ASSET" python3 - "$release_metadata" <<'PY' 2> /dev/null || true
 import json
 import os
 import re
@@ -249,7 +249,7 @@ fi
 {
     printf '#!/usr/bin/env bash\n'
     printf 'CODEX_REAL=%q\n' "$CODEX_REAL"
-    cat << 'SH'
+    cat <<'SH'
 RUNTIME_HOME="$(getent passwd abc | cut -d: -f6)"
 if [ -z "$RUNTIME_HOME" ]; then
     echo "codex: unable to resolve the abc runtime home" >&2
@@ -338,7 +338,8 @@ ln -sfn "$CODEX_BIN" "$CODEX_LINK"
 CODEX_SANDBOX_MODE="$(bashio::config 'codex_sandbox_mode' 'danger-full-access')"
 run_as_runtime_user mkdir -p "$RUNTIME_HOME/.codex"
 CODEX_SANDBOX_MODE="$CODEX_SANDBOX_MODE" RUNTIME_HOME="$RUNTIME_HOME" \
-    run_as_runtime_user python3 - << 'PY' || bashio::log.warning "Unable to update the managed Codex configuration block"
+    run_as_runtime_user python3 - <<'PY' \
+    || bashio::log.warning "Unable to update the managed Codex configuration block"
 import os
 import re
 import tomllib

claude_desktop/rootfs/etc/cont-init.d/82-claude_tools.sh

@@ -30,7 +30,7 @@ manage_claude_md_block() {
         fi
     elif [ -f "$CLAUDE_MD" ] && grep -qF "$begin" "$CLAUDE_MD"; then
         bashio::log.info "Removing ${name} guidance from CLAUDE.md"
-        CLAUDE_MD="$CLAUDE_MD" BLOCK_NAME="$name" python3 - << 'PY' || bashio::log.warning "Unable to remove the ${name} guidance automatically"
+        CLAUDE_MD="$CLAUDE_MD" BLOCK_NAME="$name" python3 - <<'PY' || bashio::log.warning "Unable to remove the ${name} guidance automatically"
 import os
 import re
 from pathlib import Path
@@ -58,7 +58,7 @@ PY
 manage_settings_hook() {
     # manage_settings_hook <event> <matcher> <command> <add|remove>
     HOOK_EVENT="$1" HOOK_MATCHER="$2" HOOK_COMMAND="$3" HOOK_ACTION="$4" \
-        python3 - << 'PY' || bashio::log.warning "Unable to update the $1 hook for '$3'"
+        python3 - <<'PY' || bashio::log.warning "Unable to update the $1 hook for '$3'"
 import json
 import os
 from pathlib import Path
@@ -389,14 +389,14 @@ bashio::log.info "MCP servers for Claude Desktop: ${MCP_SERVERS_DESKTOP}"
 bashio::log.info "MCP servers for Claude Code: ${MCP_SERVERS_CODE}"
 
 HEADROOM_ENABLED="$HEADROOM_ENABLED" HEADROOM_BIN="$(command -v headroom || echo headroom)" \
-HEADROOM_HF_HOME="${HOME}/.headroom/hf" \
+    HEADROOM_HF_HOME="${HOME}/.headroom/hf" \
-TOKENSAVE_ENABLED="$TOKENSAVE_ENABLED" TOKENSAVE_BIN="$(command -v tokensave || echo tokensave)" \
+    TOKENSAVE_ENABLED="$TOKENSAVE_ENABLED" TOKENSAVE_BIN="$(command -v tokensave || echo tokensave)" \
-CODEX_ENABLED="$CODEX_ENABLED" CODEX_BIN="$CODEX_BIN" CODEX_SANDBOX_MODE="$CODEX_SANDBOX_MODE" \
+    CODEX_ENABLED="$CODEX_ENABLED" CODEX_BIN="$CODEX_BIN" CODEX_SANDBOX_MODE="$CODEX_SANDBOX_MODE" \
-HA_MCP_ENABLED="$HA_MCP_ENABLED" HA_MCP_URL="$HA_MCP_URL" HA_MCP_TOKEN="$HA_MCP_TOKEN" \
+    HA_MCP_ENABLED="$HA_MCP_ENABLED" HA_MCP_URL="$HA_MCP_URL" HA_MCP_TOKEN="$HA_MCP_TOKEN" \
-MCP_PROXY_BIN="$(command -v mcp-proxy || echo mcp-proxy)" \
+    MCP_PROXY_BIN="$(command -v mcp-proxy || echo mcp-proxy)" \
-MCP_SERVERS_DESKTOP="$MCP_SERVERS_DESKTOP" MCP_SERVERS_CODE="$MCP_SERVERS_CODE" \
+    MCP_SERVERS_DESKTOP="$MCP_SERVERS_DESKTOP" MCP_SERVERS_CODE="$MCP_SERVERS_CODE" \
-CLAUDE_DESKTOP_CONFIG="$CLAUDE_DESKTOP_CONFIG" CLAUDE_CODE_CONFIG="$CLAUDE_CODE_CONFIG" \
+    CLAUDE_DESKTOP_CONFIG="$CLAUDE_DESKTOP_CONFIG" CLAUDE_CODE_CONFIG="$CLAUDE_CODE_CONFIG" \
-    python3 - << 'PY' || bashio::log.warning "Unable to update the MCP server registrations automatically"
+    python3 - <<'PY' || bashio::log.warning "Unable to update the MCP server registrations automatically"
 import json
 import os
 from pathlib import Path
@@ -607,7 +607,7 @@ PY
 # Guide Claude to actually use the Headroom compression tools so the MCP integration produces
 # real savings when transparent proxying is unavailable.
 if $HEADROOM_ENABLED; then
-    manage_claude_md_block headroom add << 'MD'
+    manage_claude_md_block headroom add <<'MD'
 ## Headroom context compression
 
 A local Headroom proxy (127.0.0.1:8787) backs the `headroom` MCP tools. To save context tokens:
@@ -636,7 +636,7 @@ if $HEADROOM_ENABLED && bashio::config.true 'headroom_wrap_claude_code'; then
 else
     HEADROOM_ROUTE_ACTION="remove"
 fi
-HEADROOM_ROUTE_ACTION="$HEADROOM_ROUTE_ACTION" python3 - << 'PY' || bashio::log.warning "Unable to manage the Claude Code proxy routing env"
+HEADROOM_ROUTE_ACTION="$HEADROOM_ROUTE_ACTION" python3 - <<'PY' || bashio::log.warning "Unable to manage the Claude Code proxy routing env"
 import json
 import os
 from pathlib import Path
@@ -703,7 +703,7 @@ manage_settings_hook PostToolUse "Bash|Grep|Glob|WebFetch" "$HEADROOM_HOOK_CMD"
 # Tell Claude Code that it can configure Home Assistant over the Core API via the shipped
 # `ha-cli` helper (no /config filesystem mount needed).
 if bashio::config.true 'enable_ha_api_helper'; then
-    manage_claude_md_block ha-api-helper add << 'MD'
+    manage_claude_md_block ha-api-helper add <<'MD'
 ## Configuring Home Assistant
 
 You can configure this Home Assistant instance through its Core API using the `ha-cli`
@@ -731,7 +731,7 @@ fi
 # Registering the MCP server is not enough on its own: without guidance the model rarely reaches
 # for a second agent, the same gap the Headroom block above exists to close.
 if $CODEX_ENABLED; then
-    manage_claude_md_block codex add << 'MD'
+    manage_claude_md_block codex add <<'MD'
 ## Delegating to ChatGPT Codex
 
 The `codex` MCP server runs OpenAI's Codex agent locally, signed in with the user's ChatGPT

claude_desktop/rootfs/etc/cont-init.d/83-claude_permissions.sh

@@ -19,7 +19,7 @@ esac
 # only while it still holds one of those managed values — a defaultMode the user set by hand
 # is never deleted. Ownership of the written file is reconciled by 84-claude_runtime_ownership.sh.
 mkdir -p "$(dirname "$SETTINGS_PATH")"
-PERMISSION_MODE="$PERMISSION_MODE" SETTINGS_PATH="$SETTINGS_PATH" python3 - << 'PY'
+PERMISSION_MODE="$PERMISSION_MODE" SETTINGS_PATH="$SETTINGS_PATH" python3 - <<'PY'
 import json
 import os
 from pathlib import Path

claude_desktop/rootfs/etc/cont-init.d/86-claude_safestorage.sh

@@ -36,7 +36,7 @@ fi
 # archive stays unpatched, so every later boot would retry under a new pid and strand another
 # copy until the container runs out of space.
 cleanup_tmp() {
-    find "$(dirname "$ASAR")" -maxdepth 1 -name ".$(basename "$ASAR").addon-tmp.*" -delete 2> /dev/null || true
+    find "$(dirname "$ASAR")" -maxdepth 1 -name ".$(basename "$ASAR").addon-tmp.*" -delete 2>/dev/null || true
 }
 
 if output=$(timeout 120 node "$PATCHER" "$ASAR" 2>&1); then

claude_desktop/rootfs/usr/local/bin/claude-tools-doctor.sh

@@ -45,7 +45,7 @@ if [ "$(bashio::config 'permission_mode')" = "bypass" ]; then
 fi
 
 section "Claude Code permission state"
-RUNTIME_HOME="$RUNTIME_HOME" python3 - << 'PY'
+RUNTIME_HOME="$RUNTIME_HOME" python3 - <<'PY'
 import json
 import os
 from pathlib import Path
@@ -66,7 +66,7 @@ else:
 PY
 
 section "MCP registrations (environment values redacted)"
-RUNTIME_HOME="$RUNTIME_HOME" python3 - << 'PY'
+RUNTIME_HOME="$RUNTIME_HOME" python3 - <<'PY'
 import json
 import os
 from pathlib import Path
@@ -104,7 +104,7 @@ for path in paths:
 PY
 
 section "Claude Code hooks"
-RUNTIME_HOME="$RUNTIME_HOME" python3 - << 'PY'
+RUNTIME_HOME="$RUNTIME_HOME" python3 - <<'PY'
 import json
 import os
 from pathlib import Path

claude_desktop/rootfs/usr/local/bin/ha-cli

@@ -96,7 +96,7 @@ def resolve_endpoint():
 def _url(base, path):
     path = path.lstrip("/")
     if path.startswith("api/"):
-        path = path[len("api/") :]
+        path = path[len("api/"):]
     return base.rstrip("/") + "/" + path
 
 
@@ -133,9 +133,7 @@ def rest(method, base, token, path, body=None):
     if body is not None:
         data = json.dumps(body).encode("utf-8")
         headers["Content-Type"] = "application/json"
-    req = urllib.request.Request(
+    req = urllib.request.Request(_url(base, path), data=data, method=method, headers=headers)
-        _url(base, path), data=data, method=method, headers=headers
-    )
     try:
         with urllib.request.urlopen(req, timeout=30) as resp:
             text = resp.read().decode("utf-8")
@@ -143,9 +141,7 @@ def rest(method, base, token, path, body=None):
         detail = exc.read().decode("utf-8", "replace").strip()
         sys.exit(f"ha-cli: HTTP {exc.code} {exc.reason} on {method} {path}\n{detail}")
     except urllib.error.URLError as exc:
-        sys.exit(
+        sys.exit(f"ha-cli: cannot reach Home Assistant ({exc.reason}) on {method} {path}")
-            f"ha-cli: cannot reach Home Assistant ({exc.reason}) on {method} {path}"
-        )
     try:
         return json.loads(text) if text.strip() else None
     except ValueError:
@@ -218,9 +214,7 @@ def main(argv):
             sys.exit("usage: ha-cli call <domain.service> [BODY]")
         domain, service = args[0].split(".", 1)
         body = _read_body(args[1]) if len(args) > 1 else None
-        _print(
+        _print(rest("POST", rest_base, token, f"services/{domain}/{service}", body or {}))
-            rest("POST", rest_base, token, f"services/{domain}/{service}", body or {})
-        )
     elif cmd == "states":
         path = f"states/{args[0]}" if args else "states"
         _print(rest("GET", rest_base, token, path))

claude_desktop/rootfs/usr/local/bin/headroom-posttooluse-compress.py

@@ -76,11 +76,7 @@ def main() -> int:
 
     # Find big string/array fields before paying the headroom import cost.
     def is_string_array(value):
-        return (
+        return isinstance(value, list) and len(value) > ARRAY_KEEP and all(isinstance(v, str) for v in value)
-            isinstance(value, list)
-            and len(value) > ARRAY_KEEP
-            and all(isinstance(v, str) for v in value)
-        )
 
     if isinstance(response, str):
         string_candidates = ["__whole__"] if len(response) >= MIN_CHARS else []
@@ -89,14 +85,10 @@ def main() -> int:
         string_candidates = [
             key
             for key, value in response.items()
-            if key not in SKIP_KEYS
+            if key not in SKIP_KEYS and isinstance(value, str) and len(value) >= MIN_CHARS
-            and isinstance(value, str)
-            and len(value) >= MIN_CHARS
         ]
         array_candidates = [
-            key
+            key for key, value in response.items() if key not in SKIP_KEYS and is_string_array(value)
-            for key, value in response.items()
-            if key not in SKIP_KEYS and is_string_array(value)
         ]
     else:
         string_candidates = []

cleanuparr/README.md

@@ -23,7 +23,7 @@ Integrations supported:
 ## Configuration
 
 | Option | Description |
-| -------- | ------------- |
+|--------|-------------|
 | `TZ` | Timezone (e.g. `Europe/Paris`). Defaults to `Europe/London`. |
 | `PUID` | User ID to run the process as. Defaults to `0` (root). |
 | `PGID` | Group ID to run the process as. Defaults to `0` (root). |

cleanuparr/config.yaml

@@ -1,7 +1,8 @@
 arch:
   - aarch64
   - amd64
-description: Automatically removes stuck and unwanted downloads from your *arr and download clients
+description:
+  Automatically removes stuck and unwanted downloads from your *arr and download clients
 devices:
   - /dev/dri
   - /dev/dri/card0

cleanuparr/rootfs/ha_entrypoint.sh

@@ -33,7 +33,7 @@ mkdir -p "$HA_DATA_DIR"
 # Symlink /app/config → HA persistent storage
 # The .NET app uses /app/config, NOT /config at the filesystem root
 if [ -d /app/config ] && [ ! -L /app/config ]; then
-    cp -rn /app/config/. "$HA_DATA_DIR/" 2> /dev/null || true
+    cp -rn /app/config/. "$HA_DATA_DIR/" 2>/dev/null || true
     rm -rf /app/config
 fi
 ln -sfn "$HA_DATA_DIR" /app/config

cloudcommander/README.md

@@ -40,7 +40,7 @@ Configurations can be done through the app webUI, except for the following optio
 ### Options
 
 | Option | Type | Default | Description |
-| -------- | ------ | --------- | ------------- |
+|--------|------|---------|-------------|
 | `CUSTOM_OPTIONS` | str | | Custom CLI options (e.g., `--name Homeassistant`) |
 | `DROPBOX_TOKEN` | str | | Dropbox integration token (see https://cloudcmd.io/) |
 | `localdisks` | str | | Local drives to mount (e.g., `sda1,sdb1,MYNAS`) |

cloudcommander/rootfs/etc/cont-init.d/99-run.sh

@@ -103,7 +103,7 @@ for candidate in "${cloudcmd_candidates[@]}"; do
     fi
 done
 
-if [ -z "$CLOUDCMD_BIN" ] && command -v cloudcmd > /dev/null 2>&1; then
+if [ -z "$CLOUDCMD_BIN" ] && command -v cloudcmd >/dev/null 2>&1; then
     CLOUDCMD_BIN=$(command -v cloudcmd)
 fi
 

codex/README.md

@@ -62,7 +62,7 @@ You can place the user folder from the theme/skeleton in /share/codex/www/user,
 ## Options
 
 | Option | Description | Default | Example |
-| -------- | ------------- | --------- | --------- |
+|--------|-------------|---------|---------|
 | `PGID` | Group ID for file permissions | `0` | `1000` |
 | `PUID` | User ID for file permissions | `0` | `1000` |
 | `TZ` | Timezone in long format | - | `America/Los_Angeles` |

collabora/README.md

@@ -51,7 +51,7 @@ Webui can be found at `https://homeassistant:9980/browser/dist/admin/admin.html`
 ### Options
 
 | Option | Type | Default | Description |
-| -------- | ------ | --------- | ------------- |
+|--------|------|---------|-------------|
 | `aliasgroup1` | str | | External address of the **Nextcloud** server allowed to use this Collabora (e.g. `https://nextcloud_domain\.com:443`) |
 | `aliasgroup2` | str | | A second Nextcloud server, same format as `aliasgroup1` |
 | `aliasgroup3` | str | | A third Nextcloud server, same format as `aliasgroup1` |

comicarr/README.md

@@ -30,7 +30,7 @@ database.
 ## Configuration
 
 | Option | Description |
-| -------- | ------------- |
+|--------|-------------|
 | `PUID` / `PGID` | Ownership applied to the add-on configuration directory. Defaults to `0` (root). See the note below before changing it. |
 | `TZ` | Timezone, e.g. `Europe/Paris`. |
 | `localdisks` | Local disks to mount, e.g. `sda1` or a disk label. |

comixed/README.md

@@ -60,7 +60,7 @@ Initial setup requires creating an admin account through the web interface.
 ### Options
 
 | Option | Type | Default | Description |
-| -------- | ------ | --------- | ------------- |
+|--------|------|---------|-------------|
 | `TZ` | str | | Timezone (e.g., `Europe/London`) |
 | `localdisks` | str | | Local drives to mount (e.g., `sda1,sdb1,MYNAS`) |
 | `networkdisks` | str | | SMB shares to mount (e.g., `//SERVER/SHARE`) |

elasticsearch/rootfs/usr/local/bin/addon-init.sh

@@ -46,17 +46,17 @@ fi
 # 1 Export user env_vars   #
 ############################
 
-if [ -f "$OPTIONS_JSON" ] && command -v jq > /dev/null 2>&1; then
+if [ -f "$OPTIONS_JSON" ] && command -v jq >/dev/null 2>&1; then
     while IFS= read -r pair; do
-        name=$(jq -r '.name // empty' <<< "$pair")
+        name=$(jq -r '.name // empty' <<<"$pair")
-        value=$(jq -r '.value // empty' <<< "$pair")
+        value=$(jq -r '.value // empty' <<<"$pair")
         if [[ $name =~ ^[A-Za-z_][A-Za-z0-9_]*$ ]]; then
             echo "Setting env variable from options: $name"
             export "$name"="$value"
         elif [ -n "$name" ]; then
             echo "WARNING: ignoring invalid env_vars name: $name"
         fi
-    done < <(jq -c '.env_vars[]?' "$OPTIONS_JSON" 2> /dev/null || true)
+    done < <(jq -c '.env_vars[]?' "$OPTIONS_JSON" 2>/dev/null || true)
 fi
 
 ##################################
@@ -82,7 +82,7 @@ data_version=""
 
 if [ -f "$VERSION_MARKER" ]; then
     data_version="$(head -n 1 "$VERSION_MARKER" | tr -cd '0-9.')"
-elif [ -d "$PERSISTENT_HOME/data" ] && [ -n "$(ls -A "$PERSISTENT_HOME/data" 2> /dev/null)" ]; then
+elif [ -d "$PERSISTENT_HOME/data" ] && [ -n "$(ls -A "$PERSISTENT_HOME/data" 2>/dev/null)" ]; then
     # Existing data without a marker: only 7.17.9 was ever shipped before markers
     data_version="7.17.9"
 fi
@@ -128,7 +128,7 @@ mkdir -p "$PERSISTENT_HOME"
 for dir in "data" "config"; do
     if [ ! -L "$ES_HOME/$dir" ]; then
         if [ -d "$ES_HOME/$dir" ]; then
-            cp -rn "$ES_HOME/$dir" "$PERSISTENT_HOME" 2> /dev/null || true
+            cp -rn "$ES_HOME/$dir" "$PERSISTENT_HOME" 2>/dev/null || true
             rm -rf "${ES_HOME:?}/$dir"
         fi
         mkdir -p "$PERSISTENT_HOME/$dir"
@@ -139,7 +139,7 @@ done
 # Make the persisted files usable by the elasticsearch user (uid 1000),
 # which the official entrypoint drops to when started as root
 if [ "$(id -u)" -eq 0 ]; then
-    chown -R 1000:0 "$PERSISTENT_HOME/data" "$PERSISTENT_HOME/config" 2> /dev/null || true
+    chown -R 1000:0 "$PERSISTENT_HOME/data" "$PERSISTENT_HOME/config" 2>/dev/null || true
 fi
 
 echo "Data location: $PERSISTENT_HOME (persistent). Please wait while elasticsearch starts..."
@@ -156,9 +156,9 @@ if [ "$data_version" != "$current_version" ]; then
             # Check the HTTP status directly instead of curl -f: a 401 means
             # Elasticsearch is up and answering (security just requires
             # auth), so it must count as healthy too, not as a failure.
-            status=$(curl -A "HealthCheck: Docker/1.0" -s -o /dev/null -w '%{http_code}' "http://127.0.0.1:9200" 2> /dev/null || true)
+            status=$(curl -A "HealthCheck: Docker/1.0" -s -o /dev/null -w '%{http_code}' "http://127.0.0.1:9200" 2>/dev/null || true)
             if [ "$status" = "200" ] || [ "$status" = "401" ]; then
-                echo "$current_version" > "$VERSION_MARKER"
+                echo "$current_version" >"$VERSION_MARKER"
                 echo "Elasticsearch $current_version started successfully; data version recorded."
                 exit 0
             fi

emby/README.md

@@ -43,7 +43,7 @@ Webui can be found at `<your-ip>:8096`, or within Home Assistant through Ingress
 ### Options
 
 | Option | Type | Default | Description |
-| -------- | ------ | --------- | ------------- |
+|--------|------|---------|-------------|
 | `PGID` | int | `0` | Group ID for file permissions |
 | `PUID` | int | `0` | User ID for file permissions |
 | `TZ` | str | | Timezone (e.g., `Europe/London`) |

enedisgateway2mqtt/README.md

@@ -48,7 +48,7 @@ Initial setup requires starting the addon once to initialize configuration templ
 ### Options
 
 | Option | Type | Default | Description |
-| -------- | ------ | --------- | ------------- |
+|--------|------|---------|-------------|
 | `CONFIG_LOCATION` | str | `/config/myelectricaldata/config.yaml` | Path to configuration file |
 | `TZ` | str | `Europe/Paris` | Timezone (e.g., `Europe/London`) |
 | `mqtt_autodiscover` | bool | `true` | Enable MQTT autodiscovery |

enedisgateway2mqtt_dev/README.md

@@ -48,7 +48,7 @@ Initial setup requires starting the addon once to initialize configuration templ
 ### Options
 
 | Option | Type | Default | Description |
-| -------- | ------ | --------- | ------------- |
+|--------|------|---------|-------------|
 | `CONFIG_LOCATION` | str | `/config/myelectricaldata/config.yaml` | Path to configuration file |
 | `TZ` | str | `Europe/Paris` | Timezone (e.g., `Europe/London`) |
 | `mqtt_autodiscover` | bool | `true` | Enable MQTT autodiscovery |

ente/README.md

@@ -52,7 +52,7 @@ Webui can be found at <http://homeassistant:PORT>.
 ### Options
 
 | Option | Type | Default | Description |
-| -------- | ------ | --------- | ------------- |
+|--------|------|---------|-------------|
 | `ENTE_ENDPOINT_URL` | str | `http://homeassistant.local:8280` | The URL where Ente API will be accessible (used by web UI) |
 | `DB_PASSWORD` | str | `ente` | Database password for internal PostgreSQL |
 | `USE_EXTERNAL_DB` | bool | `false` | Use external PostgreSQL database |
@@ -63,7 +63,7 @@ Webui can be found at <http://homeassistant:PORT>.
 If you want to use an external PostgreSQL database, set `USE_EXTERNAL_DB: true` and configure:
 
 | Option | Type | Description |
-| -------- | ------ | ------------- |
+|--------|------|-------------|
 | `DB_HOSTNAME` | str | PostgreSQL server hostname |
 | `DB_PORT` | int | PostgreSQL server port (default: 5432) |
 | `DB_USERNAME` | str | PostgreSQL username |

epicgamesfree/README.md

@@ -88,7 +88,7 @@ Create `/config/addons_config/epicgamesfree/config.json`:
 ### Configuration Options
 
 | Option | Type | Description |
-| -------- | ------ | ------------- |
+|--------|------|-------------|
 | `accounts` | array | List of Epic Games accounts |
 | `cronSchedule` | string | Cron schedule to claim games (default: `0 */6 * * *`) |
 | `runOnStartup` | boolean | Run a claim cycle when the add-on starts |

epicgamesfree/rootfs/etc/cont-init.d/99-run.sh

@@ -22,7 +22,7 @@ if bashio::config.true 'disable_cron'; then
     fi
 
     if bashio::command.exists service; then
-        service cron stop > /dev/null 2>&1 || true
+        service cron stop >/dev/null 2>&1 || true
     fi
 fi
 

filebrowser/README.md

@@ -59,7 +59,7 @@ The web UI can be found at `<your-ip>:8071` or through the Home Assistant sideba
 ### Options
 
 | Option | Type | Default | Description |
-| -------- | ------ | --------- | ------------- |
+|--------|------|---------|-------------|
 | `ssl` | bool | `false` | Enable HTTPS for web interface |
 | `certfile` | str | `fullchain.pem` | SSL certificate file (in `/ssl/`) |
 | `keyfile` | str | `privkey.pem` | SSL private key file (in `/ssl/`) |

filebrowser_quantum/README.md

@@ -57,7 +57,7 @@ The web UI can be found at `<your-ip>:8071` or through the Home Assistant sideba
 ### Options
 
 | Option | Type | Default | Description |
-| -------- | ------ | --------- | ------------- |
+|--------|------|---------|-------------|
 | `auth_method` | list | `password` | Authentication method (`password`, `noauth`, `proxy`, `oidc`) |
 | `default_user_scope` | str | `/` | The root filesystem path used as the FileBrowser source and as the default scope for all users. Must be an existing absolute directory path (e.g. `/share`, `/media`). |
 | `localdisks` | str | _(optional)_ | Local drives to mount (e.g., `sda1,sdb1,MYNAS`) |

fireflyiii/README.md

@@ -45,7 +45,7 @@ Configurations can be done through the app webUI, except for the following optio
 ### Options
 
 | Option | Type | Default | Description |
-| -------- | ------ | --------- | ------------- |
+|--------|------|---------|-------------|
 | `APP_KEY` | str | `CHANGEME_32_CHARS_EuC5dfn3LAPzeO` | **CRITICAL**: 32-character encryption key - change before first run! |
 | `CONFIG_LOCATION` | str | `/config/addons_config/fireflyiii/config.yaml` | Location of additional config file |
 | `DB_CONNECTION` | list | `sqlite_internal` | Database type (sqlite_internal/mariadb_addon/mysql/pgsql) |

fireflyiii_data_importer/README.md

@@ -49,7 +49,7 @@ For complete setup documentation, see: https://docs.firefly-iii.org/data-importe
 ### Options
 
 | Option | Type | Required | Description |
-| -------- | ------ | ---------- | ------------- |
+|--------|------|----------|-------------|
 | `FIREFLY_III_URL` | str | Yes | URL to your Firefly III instance |
 | `FIREFLY_III_ACCESS_TOKEN` | str | Yes | Personal Access Token from Firefly III |
 | `CONFIG_LOCATION` | str | Yes | Location for configuration files |

fireflyiii_data_importer/rootfs/templates/cronupdate

@@ -4,27 +4,19 @@ set -e
 
 # Source environment variables for cron context
 # shellcheck disable=SC1091
-if [ -f /etc/environment ]; then
+if [ -f /etc/environment ]; then set -a; . /etc/environment; set +a; fi
-	set -a
-	. /etc/environment
-	set +a
-fi
 # shellcheck disable=SC1091
-if [ -f /.env ]; then
+if [ -f /.env ]; then set -a; . /.env; set +a; fi
-	set -a
-	. /.env
-	set +a
-fi
 
 # Use persisted value instead of calling bashio::config (www-data may lack API access)
 CONFIGSOURCE="${CONFIG_LOCATION}"
 
 (
-	echo "[INFO] Running update according to defined schedule. Files located in $CONFIGSOURCE/import_files will be imported."
+echo "[INFO] Running update according to defined schedule. Files located in $CONFIGSOURCE/import_files will be imported."
-	if [ "${SILENT_MODE}" = "true" ]; then
+if [ "${SILENT_MODE}" = "true" ]; then
     echo "[WARNING] Silent mode activated. Only errors will be shown. Please disable in addon options if you need to debug"
     sudo -Eu www-data /usr/local/bin/php /var/www/html/artisan importer:auto-import "$CONFIGSOURCE/import_files" >/dev/null
-	else
+else
     sudo -Eu www-data /usr/local/bin/php /var/www/html/artisan importer:auto-import "$CONFIGSOURCE/import_files"
-	fi
+fi
 ) &>/proc/1/fd/1