fix(skill): stop the workflow scripts reporting verdicts they have not established (#3018)

* fix(skill): stop the workflow scripts reporting verdicts they have not established

Every defect here is the same species: a check printed as passed that never ran, or
never proved what it claims. All six were reproduced before and after.

validate.sh
- `run`/`finish` were selected by filename and fed to bash -n and shellcheck. 25 of the
  97 such files here are `#!/usr/bin/execlineb`, so 21 add-ons -- calibre_web and seerr
  among them -- reported `local validation FAILED` and a wall of parse errors no matter
  what the diff contained. One list, filtered by shebang, now feeds both checks; seerr
  went from 15 shellcheck findings and two bash -n failures to the single finding the
  test diff actually introduced.
- `grep -q "$ADDON/CHANGELOG.md"` was unanchored with `.` as a wildcard, so a diff
  bumping zzz_archived_overseerr/CHANGELOG.md reported seerr's as updated -- a false
  green on the one hard CI gate. Five such name collisions exist in this repo
  (also birdnet-pi/battybirdnet-pi, mealie/social_to_mealie, plex/spotify_to_plex).
  `grep -Fxq`.
- The --vs-master section skipped any file absent from origin/master, so a newly added
  script's findings -- all of which are by definition added by the diff -- were never
  reported, under a line reading "your diff introduced no new lint findings". An added
  file now compares against an empty base. A deleted one is skipped: it was being linted
  at a path that no longer exists, which turned every deletion into a fabricated
  `openBinaryFile: does not exist` finding.
- That loop ran as the right-hand side of a pipe, so it could not have reached `fail`
  even had it tried. It now runs in this shell and new findings fail the script; the
  all-clear line is printed only when nothing was listed. Findings that merely moved
  lines still cancel -- the comparison strips file:line:col before comm.
- `bash -n ok` stood for an add-on with no shell files at all, and hadolint could print
  `clean` directly after printing findings (`A && {...} || C` with pipefail). Counted
  and branched properly.

preflight.sh
- `MATCH -- this checkout corresponds to the running image` was concluded from
  config.yaml's version equalling $BUILD_VERSION. Version is bumped once per PR, so any
  later commit or a dirty tree matches while differing from what runs -- the one
  conclusion the script exists to establish was the one it overstated.

pr_review.sh
- `watch` exhausting its minutes with checks still pending fell out of the loop and
  exited 0, reporting success for checks that never settled. Unsettled is now exit 2.
  Checks reported as `skipping` still count as passing, which is correct -- for this PR
  itself, three jobs skipped because no */config.* changed, and that is the right
  outcome, not a failure. But a skipped job tested nothing, so `watch` now says so.

Reviewed by Codex (gpt-5.6-sol), which corrected two claims in the audit behind this:
the .templates CHANGELOG assertion (CI skips the gate entirely for a template-only PR,
so that fix is not in this diff) and a tradeoff that did not exist. The deleted-file and
watch-timeout defects are its finds.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

* fix(skill): address review — cwd independence, no pass verdict for an empty check

---------

Co-authored-by: Claude Opus 5 <noreply@anthropic.com>

.claude/skills/hassio-addon-workflow/scripts/pr_review.sh

@@ -90,6 +90,7 @@ resolve)
     ;;
 watch)
     MINS="${3:-180}"   # the addon build alone has taken ~3h; 20 was far too short
+    wfail=2            # not 0: running out of minutes with checks still pending is not a pass
     for i in $(seq 1 "$MINS"); do
         c=$(gh pr checks "$PR" 2> /dev/null | awk '{print $1"="$2}' | tr '\n' ' ')
         if [ -z "$c" ]; then
@@ -102,11 +103,14 @@ watch)
         case "$c" in
         *pending*) sleep 60 ;;
         *fail* | *error* | *cancel*) echo "settled — with FAILURES (see above)"; wfail=1; break ;;
-        *) echo "settled — all passing"; break ;;
+        *) echo "settled — all passing"; wfail=0; break ;;
         esac
     done
+    [ "$wfail" -eq 2 ] && echo "gave up after ${MINS}m, checks still unsettled — NOT a pass"
+    # A PR touching no */config.* skips the CHANGELOG, linter and build jobs outright (#3018).
+    case "${c:-}" in *skipping*) echo "  ...of which some were SKIPPED — a skipped job tested nothing" ;; esac
     echo "note: long queues here are usually account runner contention, not your diff."
-    exit "${wfail:-0}"
+    exit "$wfail"
     ;;
 *) echo "unknown: $CMD"; exit 1 ;;
 esac

.claude/skills/hassio-addon-workflow/scripts/preflight.sh

@@ -64,7 +64,8 @@ if [ -n "${BUILD_VERSION:-}" ]; then
         echo "  $SLUG/config.yaml version = $here"
         echo "  running image BUILD_VERSION = $BUILD_VERSION"
         if [ "$here" = "$BUILD_VERSION" ]; then
-            echo "  MATCH — this checkout corresponds to the running image."
+            # version is bumped once per PR, so a later commit or a dirty tree matches here.
+            echo "  VERSION MATCH — source revision itself is not verified."
         else
             echo "  MISMATCH — this branch is NOT what is running."
             git fetch origin master --quiet 2> /dev/null

.claude/skills/hassio-addon-workflow/scripts/validate.sh

@@ -4,10 +4,13 @@
 # rather than implying the build was checked.
 #
 # --vs-master re-lints each changed file at origin/master and prints only findings your diff
-# ADDED. Without it you will chase warnings that were already in the file.
+# ADDED, and fails if there are any. Without it you will chase warnings that were already there.
 #
 # Usage: validate.sh [addon-dir] [--vs-master]
 set -uo pipefail
+# git diff prints repo-root-relative paths and $ADDON is a top-level directory name: neither
+# resolves from a subdirectory, where the -f guard below would skip every file and report clean.
+if root=$(git rev-parse --show-toplevel 2> /dev/null); then cd "$root" || exit 1; fi
 
 ADDON="${1:-}"
 [ "${ADDON:-}" = "--vs-master" ] && { ADDON=""; set -- --vs-master; }
@@ -31,17 +34,21 @@ echo "== validating $ADDON =="
 
 fail=0
 note() { printf '  %-13s %s\n' "$1" "$2"; }
+# execline `run`/`finish` files are not shell (25 of them here, across 21 add-ons). Neither
+# linter below can read one, so anything either says about it is noise.
+is_execline() { local l; IFS= read -r l < "$1" 2> /dev/null; [[ $l == '#!'*execlineb* ]]; }
 
-# Shell: bash -n then shellcheck -x (follows sourced files, as CI does).
+# Shell: bash -n then shellcheck -x (follows sourced files, as CI does). One list for both.
-while IFS= read -r f; do
+files=()
-    [ -f "$f" ] || continue
+while IFS= read -r f; do is_execline "$f" || files+=("$f"); done \
+    < <(find "$ADDON" -type f \( -name '*.sh' -o -name 'run' -o -name 'finish' -o -name 'autostart' \) 2> /dev/null)
+for f in "${files[@]}"; do
     if ! out=$(bash -n "$f" 2>&1); then note "bash -n" "FAIL $f"; echo "$out" | sed 's/^/      /'; fail=1; fi
-done < <(find "$ADDON" -type f \( -name '*.sh' -o -name 'run' -o -name 'finish' -o -name 'autostart' \) 2> /dev/null)
+done
-[ "$fail" -eq 0 ] && note "bash -n" "ok"
+[ "$fail" -eq 0 ] && note "bash -n" "${#files[@]} file(s) checked"
 
-if command -v shellcheck > /dev/null 2>&1; then
+if [ "${#files[@]}" -gt 0 ] && command -v shellcheck > /dev/null 2>&1; then
-    sc=$(find "$ADDON" -type f \( -name '*.sh' -o -name 'autostart' -o -name 'run' -o -name 'finish' \) -print0 2> /dev/null |
+    sc=$(shellcheck -x -f gcc "${files[@]}" 2>&1)
-        xargs -0 -r shellcheck -x -f gcc 2>&1)
     if [ -n "$sc" ]; then
         note "shellcheck" "$(printf '%s\n' "$sc" | grep -c .) finding(s)"
         printf '%s\n' "$sc" | sed 's/^/      /' | head -20
@@ -50,7 +57,10 @@ fi
 
 command -v hadolint > /dev/null 2>&1 && [ -f "$ADDON/Dockerfile" ] && {
     hl=$(hadolint "$ADDON/Dockerfile" 2>&1)
-    [ -n "$hl" ] && { note "hadolint" "$(printf '%s\n' "$hl" | grep -c .) finding(s)"; printf '%s\n' "$hl" | sed 's/^/      /' | head -10; } || note "hadolint" "clean"
+    if [ -n "$hl" ]; then
+        note "hadolint" "$(printf '%s\n' "$hl" | grep -c .) finding(s)"
+        printf '%s\n' "$hl" | sed 's/^/      /' | head -10
+    else note "hadolint" "clean"; fi
 }
 
 if [ -f "$ADDON/config.yaml" ]; then
@@ -79,11 +89,14 @@ $VS_MASTER && command -v npx > /dev/null 2>&1 && [ -f "$ADDON/CHANGELOG.md" ] &&
 
 echo
 echo "== CI requirements =="
-if git diff --name-only origin/master...HEAD 2> /dev/null | grep -q "$ADDON/CHANGELOG.md"; then
+# -Fxq, not -q: unanchored, seerr's is matched by zzz_archived_overseerr's, and . is a wildcard.
+# Stricter than the gate itself, whose quoted =~ accepts that same collision
+# (onpr_check-pr.yaml:75), so this can fail where CI passes — the wrong add-on's is still wrong.
+if git diff --name-only origin/master...HEAD 2> /dev/null | grep -Fxq "$ADDON/CHANGELOG.md"; then
     note "CHANGELOG" "updated"
 else
     # This one IS gated: onpr_check-pr.yaml exits 1 without it.
-    note "CHANGELOG" "NOT UPDATED — this is the one CI hard-gate"; fail=1
+    note "CHANGELOG" "NOT UPDATED for $ADDON — CI hard-gates this"; fail=1
 fi
 if git diff origin/master...HEAD -- "$ADDON/config.yaml" 2> /dev/null | grep -q '^+version:'; then
     note "version" "bumped"
@@ -98,8 +111,15 @@ if $VS_MASTER; then
     echo
     echo "== findings ADDED by this diff (pre-existing ones filtered out) =="
     tmp=$(mktemp -d); trap 'rm -rf "$tmp"' EXIT
-    git diff --name-only origin/master...HEAD -- "$ADDON" 2> /dev/null | while IFS= read -r f; do
+    added=0
-        git show "origin/master:$f" > "$tmp/base" 2> /dev/null || continue
+    # Fed by process substitution, not a pipe: a pipeline runs this in a subshell, where the
+    # findings below could never reach $fail and the verdict would contradict the list.
+    while IFS= read -r f; do
+        # Deleted: linting the path that is gone invents a finding. Added: no base, and an
+        # empty one says the right thing — every finding in it is one this diff added.
+        [ -f "$f" ] || continue
+        is_execline "$f" && continue
+        git show "origin/master:$f" > "$tmp/base" 2> /dev/null || : > "$tmp/base"
         # A missing linter must be a visible skip, not a silent "no new findings":
         # its "command not found" error is identical for base and head, so comm would
         # cancel it out and report a false clean.
@@ -115,12 +135,16 @@ if $VS_MASTER; then
                 cmd() { hadolint "$1" 2>&1 | sed 's/^[^:]*//; s/^:[0-9]*//'; } ;;
             *) continue ;;
         esac
-        cp "$tmp/base" "$tmp/base_f"; b=$(cmd "$tmp/base_f" | sort)
+        b=$(cmd "$tmp/base" | sort)
         a=$(cmd "$f" | sort)
-        new=$(comm -13 <(printf '%s\n' "$b") <(printf '%s\n' "$a") | grep -c .)
+        new=$(comm -13 <(printf '%s\n' "$b") <(printf '%s\n' "$a"))
-        [ "$new" -gt 0 ] && { echo "  $f: $new NEW finding(s)"; comm -13 <(printf '%s\n' "$b") <(printf '%s\n' "$a") | sed 's/^/      /' | head -5; }
+        [ -n "$new" ] && {
-    done
+            echo "  $f: $(printf '%s\n' "$new" | grep -c .) NEW finding(s)"
-    echo "  (nothing listed above = your diff introduced no new lint findings)"
+            printf '%s\n' "$new" | sed 's/^/      /' | head -5
+            added=1; fail=1
+        }
+    done < <(git diff --name-only origin/master...HEAD -- "$ADDON" 2> /dev/null)
+    [ "$added" -eq 0 ] && echo "  (none — this diff introduced no new lint findings)"
 fi
 
 echo

.github/workflows/daily_README.yaml

@@ -228,7 +228,7 @@ jobs:
           echo "... done"
 
       - name: Commit if needed
-        uses: EndBug/add-and-commit@v11.0.0
+        uses: EndBug/add-and-commit@v11.1.1
         with:
           message: "GitHub bot : README updated"
           default_author: github_actions

.github/workflows/daily_ai_fix.yaml

@@ -125,7 +125,7 @@ jobs:
 
       - name: Analyse and fix
         if: steps.batch.outputs.count != '0'
-        uses: anthropics/claude-code-action@9d7150bc8a3dae8149739a88019d192b579ad90c  # v1
+        uses: anthropics/claude-code-action@dcb57747bfceeaa1fa72638cae52295d1d853d4a  # v1
         with:
           claude_code_oauth_token: ${{ secrets.CLAUDE_CODE_OAUTH_TOKEN }}
           # Skip the OIDC -> Claude App token exchange. The scheduled path

.github/workflows/helper_stats_graphs.yaml

@@ -237,7 +237,7 @@ jobs:
           # Get stars evolution
           wget -S -O .github/starsevol.svg "https://api.star-history.com/svg?repos=alexbelgium/hassio-addons&type=Date" || true
       - name: Commit if needed
-        uses: EndBug/add-and-commit@v11.0.0
+        uses: EndBug/add-and-commit@v11.1.1
         with:
           message: "GitHub bot : graphs updated"
           default_author: github_actions

.github/workflows/on_claude_mention.yml

@@ -64,7 +64,7 @@ jobs:
           fetch-depth: 1
 
       - name: Run Claude Code
-        uses: anthropics/claude-code-action@9d7150bc8a3dae8149739a88019d192b579ad90c  # v1
+        uses: anthropics/claude-code-action@dcb57747bfceeaa1fa72638cae52295d1d853d4a  # v1
         with:
           claude_code_oauth_token: ${{ secrets.CLAUDE_CODE_OAUTH_TOKEN }}
           # AI_PR_TOKEN, not GITHUB_TOKEN, so a PR Claude opens triggers CI.

.github/workflows/on_issue_approved.yaml

@@ -135,7 +135,7 @@ jobs:
 
       - name: Execute the plan
         if: steps.bundle.outputs.has_plan == 'true'
-        uses: anthropics/claude-code-action@9d7150bc8a3dae8149739a88019d192b579ad90c  # v1
+        uses: anthropics/claude-code-action@dcb57747bfceeaa1fa72638cae52295d1d853d4a  # v1
         with:
           claude_code_oauth_token: ${{ secrets.CLAUDE_CODE_OAUTH_TOKEN }}
           # Skip the OIDC -> Claude App token exchange, which 401s whenever

.github/workflows/on_issues.yml

@@ -59,7 +59,7 @@ jobs:
         # Remove issues list
         rm issueslist
     - name: Commit if needed
-      uses: EndBug/add-and-commit@v11.0.0
+      uses: EndBug/add-and-commit@v11.1.1
       with:
         message: "Github bot : issues linked to readme"
         default_author: github_actions

.github/workflows/on_issues_ai_triage.yaml

@@ -166,7 +166,7 @@ jobs:
         id: classify
         if: github.event_name != 'issue_comment' || steps.claim.outputs.go == 'true'
         continue-on-error: true
-        uses: anthropics/claude-code-action@9d7150bc8a3dae8149739a88019d192b579ad90c  # v1
+        uses: anthropics/claude-code-action@dcb57747bfceeaa1fa72638cae52295d1d853d4a  # v1
         with:
           claude_code_oauth_token: ${{ secrets.CLAUDE_CODE_OAUTH_TOKEN }}
           # Without this the action falls back to the OIDC -> Claude App token

.github/workflows/on_pr_coderabbit.yml

@@ -79,7 +79,7 @@ jobs:
 
       - name: Address CodeRabbit comments
         if: steps.claim.outputs.go == 'true'
-        uses: anthropics/claude-code-action@9d7150bc8a3dae8149739a88019d192b579ad90c  # v1
+        uses: anthropics/claude-code-action@dcb57747bfceeaa1fa72638cae52295d1d853d4a  # v1
         with:
           claude_code_oauth_token: ${{ secrets.CLAUDE_CODE_OAUTH_TOKEN }}
           # Skip the OIDC -> Claude App token exchange, which 401s whenever

.github/workflows/onpush_builder.yaml

@@ -95,7 +95,7 @@ jobs:
       - name: Commit sanitize changes
         id: sanitize_commit
         if: ${{ github.event_name == 'push' && github.ref == 'refs/heads/master' }}
-        uses: EndBug/add-and-commit@v11.0.0
+        uses: EndBug/add-and-commit@v11.1.1
         with:
           commit: -u
           message: "GitHub bot: sanitize (spaces + LF endings) & chmod [nobuild]"
@@ -410,7 +410,7 @@ jobs:
           done
 
       - name: Commit changelog changes
-        uses: EndBug/add-and-commit@v11.0.0
+        uses: EndBug/add-and-commit@v11.1.1
         with:
           commit: -u
           message: "GitHub bot: changelog [nobuild]"

.github/workflows/weekly_crlftolf.yaml

@@ -18,7 +18,7 @@ jobs:
         uses: erclu/check-crlf@v1
 
       - name: Commit if needed
-        uses: EndBug/add-and-commit@v11.0.0
+        uses: EndBug/add-and-commit@v11.1.1
         with:
           message: "Github bot : CRLF corrected"
           default_author: github_actions
@@ -50,7 +50,7 @@ jobs:
             dos2unix -k "$f"
           done
       - name: Commit if needed
-        uses: EndBug/add-and-commit@v11.0.0
+        uses: EndBug/add-and-commit@v11.1.1
         with:
           message: "Github bot : CRLF corrected"
           default_author: github_actions

.github/workflows/weekly_reduceimagesize.yml

@@ -31,7 +31,7 @@ jobs:
 
       - name: Commit if needed
         if: steps.calibre.outputs.markdown != ''
-        uses: EndBug/add-and-commit@v11.0.0
+        uses: EndBug/add-and-commit@v11.1.1
         with:
           message: "Github bot : image compressed"
           default_author: github_actions

.github/workflows/weekly_stats.yaml

@@ -109,7 +109,7 @@ jobs:
           #TOTAL3="$(awk '{SUM+=$2}END{print SUM}' Stats)"
 
       - name: Commit if needed
-        uses: EndBug/add-and-commit@v11.0.0
+        uses: EndBug/add-and-commit@v11.1.1
         with:
           default_author: github_actions
           message : "Github bot : stats updated"