Improve PUID code

2026-03-04 00:01:36 +01:00 · 2022-10-09 12:21:36 +02:00
parent adc2976c1a
commit 16370315bf
31 changed files with 31 additions and 31 deletions
--- a/bazarr/Dockerfile
+++ b/bazarr/Dockerfile
@@ -38,7 +38,7 @@ RUN \
    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if bashio::config.has_value "PUID"; then bashio::config "PUID"; else echo "0"; fi)"' "$file" && sed -i '1a PGID="$(if bashio::config.has_value "PGID"; then bashio::config "PGID"; else echo "0"; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
--- a/booksonic_air/Dockerfile
+++ b/booksonic_air/Dockerfile
@@ -40,7 +40,7 @@ RUN \
    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if bashio::config.has_value "PUID"; then bashio::config "PUID"; else echo "0"; fi)"' "$file" && sed -i '1a PGID="$(if bashio::config.has_value "PGID"; then bashio::config "PGID"; else echo "0"; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
--- a/calibre/Dockerfile
+++ b/calibre/Dockerfile
@@ -39,7 +39,7 @@ RUN \
    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if bashio::config.has_value "PUID"; then bashio::config "PUID"; else echo "0"; fi)"' "$file" && sed -i '1a PGID="$(if bashio::config.has_value "PGID"; then bashio::config "PGID"; else echo "0"; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
--- a/calibre_web/Dockerfile
+++ b/calibre_web/Dockerfile
@@ -39,7 +39,7 @@ RUN \
    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if bashio::config.has_value "PUID"; then bashio::config "PUID"; else echo "0"; fi)"' "$file" && sed -i '1a PGID="$(if bashio::config.has_value "PGID"; then bashio::config "PGID"; else echo "0"; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
--- a/code-server/Dockerfile
+++ b/code-server/Dockerfile
@@ -38,7 +38,7 @@ RUN \
    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if bashio::config.has_value "PUID"; then bashio::config "PUID"; else echo "0"; fi)"' "$file" && sed -i '1a PGID="$(if bashio::config.has_value "PGID"; then bashio::config "PGID"; else echo "0"; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
--- a/emby/Dockerfile
+++ b/emby/Dockerfile
@@ -38,7 +38,7 @@ RUN \
    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if bashio::config.has_value "PUID"; then bashio::config "PUID"; else echo "0"; fi)"' "$file" && sed -i '1a PGID="$(if bashio::config.has_value "PGID"; then bashio::config "PGID"; else echo "0"; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
--- a/flexget/Dockerfile
+++ b/flexget/Dockerfile
@@ -48,7 +48,7 @@ RUN \
    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if bashio::config.has_value "PUID"; then bashio::config "PUID"; else echo "0"; fi)"' "$file" && sed -i '1a PGID="$(if bashio::config.has_value "PGID"; then bashio::config "PGID"; else echo "0"; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
--- a/grav/Dockerfile
+++ b/grav/Dockerfile
@@ -38,7 +38,7 @@ RUN \
    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if bashio::config.has_value "PUID"; then bashio::config "PUID"; else echo "0"; fi)"' "$file" && sed -i '1a PGID="$(if bashio::config.has_value "PGID"; then bashio::config "PGID"; else echo "0"; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
--- a/jackett/Dockerfile
+++ b/jackett/Dockerfile
@@ -38,7 +38,7 @@ RUN \
    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if bashio::config.has_value "PUID"; then bashio::config "PUID"; else echo "0"; fi)"' "$file" && sed -i '1a PGID="$(if bashio::config.has_value "PGID"; then bashio::config "PGID"; else echo "0"; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
--- a/jellyfin/Dockerfile
+++ b/jellyfin/Dockerfile
@@ -39,7 +39,7 @@ RUN \
    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if bashio::config.has_value "PUID"; then bashio::config "PUID"; else echo "0"; fi)"' "$file" && sed -i '1a PGID="$(if bashio::config.has_value "PGID"; then bashio::config "PGID"; else echo "0"; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
--- a/lidarr/Dockerfile
+++ b/lidarr/Dockerfile
@@ -38,7 +38,7 @@ RUN \
    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if bashio::config.has_value "PUID"; then bashio::config "PUID"; else echo "0"; fi)"' "$file" && sed -i '1a PGID="$(if bashio::config.has_value "PGID"; then bashio::config "PGID"; else echo "0"; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
--- a/mylar3/Dockerfile
+++ b/mylar3/Dockerfile
@@ -38,7 +38,7 @@ RUN \
    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if bashio::config.has_value "PUID"; then bashio::config "PUID"; else echo "0"; fi)"' "$file" && sed -i '1a PGID="$(if bashio::config.has_value "PGID"; then bashio::config "PGID"; else echo "0"; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
--- a/nzbget/Dockerfile
+++ b/nzbget/Dockerfile
@@ -42,7 +42,7 @@ RUN \
    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if bashio::config.has_value "PUID"; then bashio::config "PUID"; else echo "0"; fi)"' "$file" && sed -i '1a PGID="$(if bashio::config.has_value "PGID"; then bashio::config "PGID"; else echo "0"; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
--- a/ombi/Dockerfile
+++ b/ombi/Dockerfile
@@ -38,7 +38,7 @@ RUN \
    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if bashio::config.has_value "PUID"; then bashio::config "PUID"; else echo "0"; fi)"' "$file" && sed -i '1a PGID="$(if bashio::config.has_value "PGID"; then bashio::config "PGID"; else echo "0"; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
--- a/organizr/Dockerfile
+++ b/organizr/Dockerfile
@@ -37,7 +37,7 @@ RUN \
    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if bashio::config.has_value "PUID"; then bashio::config "PUID"; else echo "0"; fi)"' "$file" && sed -i '1a PGID="$(if bashio::config.has_value "PGID"; then bashio::config "PGID"; else echo "0"; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
--- a/overseerr/Dockerfile
+++ b/overseerr/Dockerfile
@@ -39,7 +39,7 @@ RUN \
    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if bashio::config.has_value "PUID"; then bashio::config "PUID"; else echo "0"; fi)"' "$file" && sed -i '1a PGID="$(if bashio::config.has_value "PGID"; then bashio::config "PGID"; else echo "0"; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
--- a/paperless_ngx/Dockerfile
+++ b/paperless_ngx/Dockerfile
@@ -38,7 +38,7 @@ RUN \
    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if bashio::config.has_value "PUID"; then bashio::config "PUID"; else echo "0"; fi)"' "$file" && sed -i '1a PGID="$(if bashio::config.has_value "PGID"; then bashio::config "PGID"; else echo "0"; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
--- a/papermerge/Dockerfile
+++ b/papermerge/Dockerfile
@@ -45,7 +45,7 @@ RUN \
    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if bashio::config.has_value "PUID"; then bashio::config "PUID"; else echo "0"; fi)"' "$file" && sed -i '1a PGID="$(if bashio::config.has_value "PGID"; then bashio::config "PGID"; else echo "0"; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
--- a/piwigo/Dockerfile
+++ b/piwigo/Dockerfile
@@ -38,7 +38,7 @@ RUN \
    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if bashio::config.has_value "PUID"; then bashio::config "PUID"; else echo "0"; fi)"' "$file" && sed -i '1a PGID="$(if bashio::config.has_value "PGID"; then bashio::config "PGID"; else echo "0"; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
--- a/plex/Dockerfile
+++ b/plex/Dockerfile
@@ -47,7 +47,7 @@ RUN \
    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if bashio::config.has_value "PUID"; then bashio::config "PUID"; else echo "0"; fi)"' "$file" && sed -i '1a PGID="$(if bashio::config.has_value "PGID"; then bashio::config "PGID"; else echo "0"; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
--- a/plex_meta_manager/Dockerfile
+++ b/plex_meta_manager/Dockerfile
@@ -46,7 +46,7 @@ RUN \
    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if bashio::config.has_value "PUID"; then bashio::config "PUID"; else echo "0"; fi)"' "$file" && sed -i '1a PGID="$(if bashio::config.has_value "PGID"; then bashio::config "PGID"; else echo "0"; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
--- a/prowlarr/Dockerfile
+++ b/prowlarr/Dockerfile
@@ -38,7 +38,7 @@ RUN \
    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if bashio::config.has_value "PUID"; then bashio::config "PUID"; else echo "0"; fi)"' "$file" && sed -i '1a PGID="$(if bashio::config.has_value "PGID"; then bashio::config "PGID"; else echo "0"; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
--- a/qbittorrent/Dockerfile
+++ b/qbittorrent/Dockerfile
@@ -61,7 +61,7 @@ RUN \
    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if bashio::config.has_value "PUID"; then bashio::config "PUID"; else echo "0"; fi)"' "$file" && sed -i '1a PGID="$(if bashio::config.has_value "PGID"; then bashio::config "PGID"; else echo "0"; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
--- a/radarr/Dockerfile
+++ b/radarr/Dockerfile
@@ -38,7 +38,7 @@ RUN \
    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if bashio::config.has_value "PUID"; then bashio::config "PUID"; else echo "0"; fi)"' "$file" && sed -i '1a PGID="$(if bashio::config.has_value "PGID"; then bashio::config "PGID"; else echo "0"; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
--- a/readarr/Dockerfile
+++ b/readarr/Dockerfile
@@ -39,7 +39,7 @@ RUN \
    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if bashio::config.has_value "PUID"; then bashio::config "PUID"; else echo "0"; fi)"' "$file" && sed -i '1a PGID="$(if bashio::config.has_value "PGID"; then bashio::config "PGID"; else echo "0"; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
--- a/requestrr/Dockerfile
+++ b/requestrr/Dockerfile
@@ -38,7 +38,7 @@ RUN \
    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if bashio::config.has_value "PUID"; then bashio::config "PUID"; else echo "0"; fi)"' "$file" && sed -i '1a PGID="$(if bashio::config.has_value "PGID"; then bashio::config "PGID"; else echo "0"; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
--- a/resiliosync/Dockerfile
+++ b/resiliosync/Dockerfile
@@ -52,7 +52,7 @@ RUN \
    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if bashio::config.has_value "PUID"; then bashio::config "PUID"; else echo "0"; fi)"' "$file" && sed -i '1a PGID="$(if bashio::config.has_value "PGID"; then bashio::config "PGID"; else echo "0"; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
--- a/sonarr/Dockerfile
+++ b/sonarr/Dockerfile
@@ -39,7 +39,7 @@ RUN \
    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if bashio::config.has_value "PUID"; then bashio::config "PUID"; else echo "0"; fi)"' "$file" && sed -i '1a PGID="$(if bashio::config.has_value "PGID"; then bashio::config "PGID"; else echo "0"; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
--- a/transmission/Dockerfile
+++ b/transmission/Dockerfile
@@ -38,7 +38,7 @@ RUN \
    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if bashio::config.has_value "PUID"; then bashio::config "PUID"; else echo "0"; fi)"' "$file" && sed -i '1a PGID="$(if bashio::config.has_value "PGID"; then bashio::config "PGID"; else echo "0"; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
--- a/ubooquity/Dockerfile
+++ b/ubooquity/Dockerfile
@@ -48,7 +48,7 @@ RUN \
    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if bashio::config.has_value "PUID"; then bashio::config "PUID"; else echo "0"; fi)"' "$file" && sed -i '1a PGID="$(if bashio::config.has_value "PGID"; then bashio::config "PGID"; else echo "0"; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
--- a/webtop_kde/Dockerfile
+++ b/webtop_kde/Dockerfile
@@ -51,7 +51,7 @@ RUN \
    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if bashio::config.has_value "PUID"; then bashio::config "PUID"; else echo "0"; fi)"' "$file" && sed -i '1a PGID="$(if bashio::config.has_value "PGID"; then bashio::config "PGID"; else echo "0"; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \