Home Assistant Integration

birdnet-go/README.md

@@ -72,6 +72,7 @@ Birdnet-Go can be integrated with Home Assistant using a MQTT Broker.
 ### Birdnet-Go Events Sensor
 
 Your Home Assistant must be setup with MQTT and Birdnet-Go MQTT integration must be enabled. Modify the Birdnet-Go config.yaml file to enable MQTT. If you are using the Mosquitto Broker addon, you will see a log message during the Birdnet-Go startup showing the internal MQTT server details needed for configuration similar to below.
+
 ```text
 Birdnet-Go log snipped showing MQTT details:
 /etc/cont-init.d/33-mqtt.sh: executing
@@ -252,11 +253,13 @@ card_mod:
             padding-right: 18px;
       }
 ```
+
 ## Setting up a RTSP Source using VLC
 
 ### Linux instructions
 
 Run vlc without an interface using one of these commands:
+
 ```bash
 # This should work for most devices
 /usr/bin/vlc -I dummy -vvv alsa://hw:0,0 --sout '#transcode{acodec=mpga}:rtp{dst=192.168.1.21,port=1234,proto=tcp,sdp=rtsp://192.168.1.21:8080/stream.sdp}'
@@ -266,6 +269,7 @@ Run vlc without an interface using one of these commands:
 ```
 
 Run `arecord -l` to get microphone hardware info
+
 ```text
 **** List of CAPTURE Hardware Devices ****
 card 0: PCH [HDA Intel PCH], device 0: ALC3220 Analog [ALC3220 Analog]
@@ -281,9 +285,11 @@ card 4: Device [USB PnP Sound Device], device 0: USB Audio [USB Audio]
   Subdevices: 0/1
   Subdevice #0: subdevice #0
 ```
+
 hw:4,0 = **card 4**: Device [USB PnP Sound Device], **device 0**: USB Audio [USB Audio]
 
 Systemd service file example. Adjust the user:group accordingly. If you want to run as root, you will likely need to run vlc-wrapper instead of vlc.
+
 ```text
 [Unit]
 Description=VLC Birdnet RTSP Server
@@ -301,7 +307,6 @@ Group=somegroup
 WantedBy=multi-user.target
 ```
 
-
 ## Common issues
 
 Not yet available