Correction

2026-01-13 19:31:01 +01:00 · 2022-09-21 17:56:15 +02:00
parent 0b96671fc7
commit f5c4792976
99 changed files with 192 additions and 192 deletions
--- a/addons_updater/config.json
+++ b/addons_updater/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/arpspoof/config.json
+++ b/arpspoof/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/bazarr/Dockerfile
+++ b/bazarr/Dockerfile
@@ -34,15 +34,15 @@ RUN \
    # Avoid custom-init.d duplications
    for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
    \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
    \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
    # Avoid chmod /config
    && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done

--- a/bazarr/config.json
+++ b/bazarr/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/bitwarden/config.json
+++ b/bitwarden/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/booksonic_air/Dockerfile
+++ b/booksonic_air/Dockerfile
@@ -36,15 +36,15 @@ RUN \
    # Avoid custom-init.d duplications
    for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
    \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
    \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
    # Avoid chmod /config
    && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done

--- a/booksonic_air/config.json
+++ b/booksonic_air/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/calibre/Dockerfile
+++ b/calibre/Dockerfile
@@ -35,15 +35,15 @@ RUN \
    # Avoid custom-init.d duplications
    for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
    \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
    \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
    # Avoid chmod /config
    && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done

--- a/calibre/config.json
+++ b/calibre/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/calibre_web/Dockerfile
+++ b/calibre_web/Dockerfile
@@ -35,15 +35,15 @@ RUN \
    # Avoid custom-init.d duplications
    for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
    \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
    \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
    # Avoid chmod /config
    && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done

--- a/calibre_web/config.json
+++ b/calibre_web/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/cloudcommander/config.json
+++ b/cloudcommander/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/code-server/Dockerfile
+++ b/code-server/Dockerfile
@@ -34,15 +34,15 @@ RUN \
    # Avoid custom-init.d duplications
    for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
    \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
    \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
    # Avoid chmod /config
    && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done

--- a/code-server/config.json
+++ b/code-server/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/elasticsearch/config.json
+++ b/elasticsearch/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64"
  ],
--- a/emby/Dockerfile
+++ b/emby/Dockerfile
@@ -34,15 +34,15 @@ RUN \
    # Avoid custom-init.d duplications
    for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
    \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
    \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
    # Avoid chmod /config
    && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done

--- a/emby/config.json
+++ b/emby/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/enedisgateway2mqtt/config.json
+++ b/enedisgateway2mqtt/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/enedisgateway2mqtt_dev/config.json
+++ b/enedisgateway2mqtt_dev/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/epicgamesfree/config.json
+++ b/epicgamesfree/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64"
  ],
--- a/filebrowser/config.json
+++ b/filebrowser/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/fireflyiii/config.json
+++ b/fireflyiii/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/fireflyiii_data_importer/config.json
+++ b/fireflyiii_data_importer/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/fireflyiii_fints_importer/config.json
+++ b/fireflyiii_fints_importer/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "amd64"
  ],
  "codenotary": "alexandrep.github@gmail.com",
--- a/flaresolverr/config.json
+++ b/flaresolverr/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/flexget/Dockerfile
+++ b/flexget/Dockerfile
@@ -44,15 +44,15 @@ RUN \
    # Avoid custom-init.d duplications
    for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
    \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
    \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
    # Avoid chmod /config
    && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done

--- a/flexget/config.json
+++ b/flexget/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/gazpar2mqtt/config.json
+++ b/gazpar2mqtt/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/gitea/config.json
+++ b/gitea/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64"
  ],
--- a/grav/Dockerfile
+++ b/grav/Dockerfile
@@ -34,15 +34,15 @@ RUN \
    # Avoid custom-init.d duplications
    for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
    \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
    \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
    # Avoid chmod /config
    && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done

--- a/grav/config.json
+++ b/grav/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/guacamole/config.json
+++ b/guacamole/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "amd64",
    "aarch64"
  ],
--- a/inadyn/config.json
+++ b/inadyn/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/jackett/Dockerfile
+++ b/jackett/Dockerfile
@@ -34,15 +34,15 @@ RUN \
    # Avoid custom-init.d duplications
    for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
    \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
    \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
    # Avoid chmod /config
    && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done

--- a/jackett/config.json
+++ b/jackett/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/jellyfin/Dockerfile
+++ b/jellyfin/Dockerfile
@@ -35,15 +35,15 @@ RUN \
    # Avoid custom-init.d duplications
    for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
    \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
    \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
    # Avoid chmod /config
    && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done

--- a/jellyfin/config.json
+++ b/jellyfin/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/joal/config.json
+++ b/joal/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/joplin/config.json
+++ b/joplin/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/lidarr/Dockerfile
+++ b/lidarr/Dockerfile
@@ -34,15 +34,15 @@ RUN \
    # Avoid custom-init.d duplications
    for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
    \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
    \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
    # Avoid chmod /config
    && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done

--- a/lidarr/config.json
+++ b/lidarr/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/mealie/config.json
+++ b/mealie/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/mylar3/Dockerfile
+++ b/mylar3/Dockerfile
@@ -34,15 +34,15 @@ RUN \
    # Avoid custom-init.d duplications
    for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
    \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
    \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
    # Avoid chmod /config
    && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done

--- a/mylar3/config.json
+++ b/mylar3/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/nextcloud/config.json
+++ b/nextcloud/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/nzbget/Dockerfile
+++ b/nzbget/Dockerfile
@@ -38,15 +38,15 @@ RUN \
    # Avoid custom-init.d duplications
    for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
    \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
    \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
    # Avoid chmod /config
    && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done

--- a/nzbget/config.json
+++ b/nzbget/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/omada/config.json
+++ b/omada/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64"
  ],
--- a/ombi/Dockerfile
+++ b/ombi/Dockerfile
@@ -34,15 +34,15 @@ RUN \
    # Avoid custom-init.d duplications
    for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
    \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
    \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
    # Avoid chmod /config
    && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done

--- a/ombi/config.json
+++ b/ombi/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/organizr/Dockerfile
+++ b/organizr/Dockerfile
@@ -33,15 +33,15 @@ RUN \
    # Avoid custom-init.d duplications
    for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
    \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
    \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
    # Avoid chmod /config
    && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done

--- a/organizr/config.json
+++ b/organizr/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/overseerr/Dockerfile
+++ b/overseerr/Dockerfile
@@ -35,15 +35,15 @@ RUN \
    # Avoid custom-init.d duplications
    for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
    \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
    \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
    # Avoid chmod /config
    && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done

--- a/overseerr/config.json
+++ b/overseerr/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/paperless_ngx/Dockerfile
+++ b/paperless_ngx/Dockerfile
@@ -34,15 +34,15 @@ RUN \
    # Avoid custom-init.d duplications
    for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
    \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
    \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
    # Avoid chmod /config
    && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done

--- a/paperless_ngx/config.json
+++ b/paperless_ngx/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/papermerge/Dockerfile
+++ b/papermerge/Dockerfile
@@ -41,15 +41,15 @@ RUN \
    # Avoid custom-init.d duplications
    for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
    \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
    \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
    # Avoid chmod /config
    && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done

--- a/papermerge/config.json
+++ b/papermerge/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/photoprism/config.json
+++ b/photoprism/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64"
  ],
--- a/piwigo/Dockerfile
+++ b/piwigo/Dockerfile
@@ -34,15 +34,15 @@ RUN \
    # Avoid custom-init.d duplications
    for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
    \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
    \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
    # Avoid chmod /config
    && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done

--- a/piwigo/config.json
+++ b/piwigo/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/plex/Dockerfile
+++ b/plex/Dockerfile
@@ -43,15 +43,15 @@ RUN \
    # Avoid custom-init.d duplications
    for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
    \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
    \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
    # Avoid chmod /config
    && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done

--- a/plex/config.json
+++ b/plex/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/plex_meta_manager/Dockerfile
+++ b/plex_meta_manager/Dockerfile
@@ -42,15 +42,15 @@ RUN \
    # Avoid custom-init.d duplications
    for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
    \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
    \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
    # Avoid chmod /config
    && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done

--- a/plex_meta_manager/config.json
+++ b/plex_meta_manager/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/portainer/config.json
+++ b/portainer/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/prowlarr/Dockerfile
+++ b/prowlarr/Dockerfile
@@ -34,15 +34,15 @@ RUN \
    # Avoid custom-init.d duplications
    for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
    \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
    \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
    # Avoid chmod /config
    && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done

--- a/prowlarr/config.json
+++ b/prowlarr/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/qbittorrent/Dockerfile
+++ b/qbittorrent/Dockerfile
@@ -57,15 +57,15 @@ RUN \
    # Avoid custom-init.d duplications
    for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
    \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
    \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
    # Avoid chmod /config
    && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done \
    \
--- a/qbittorrent/config.json
+++ b/qbittorrent/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/radarr/Dockerfile
+++ b/radarr/Dockerfile
@@ -34,15 +34,15 @@ RUN \
    # Avoid custom-init.d duplications
    for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
    \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
    \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
    # Avoid chmod /config
    && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done

--- a/radarr/config.json
+++ b/radarr/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/readarr/Dockerfile
+++ b/readarr/Dockerfile
@@ -35,15 +35,15 @@ RUN \
    # Avoid custom-init.d duplications
    for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
    \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
    \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
    # Avoid chmod /config
    && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done

--- a/readarr/config.json
+++ b/readarr/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/requestrr/Dockerfile
+++ b/requestrr/Dockerfile
@@ -34,15 +34,15 @@ RUN \
    # Avoid custom-init.d duplications
    for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
    \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
    \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
    # Avoid chmod /config
    && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done

--- a/requestrr/config.json
+++ b/requestrr/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/resiliosync/Dockerfile
+++ b/resiliosync/Dockerfile
@@ -46,15 +46,15 @@ RUN \
    # Avoid custom-init.d duplications
    for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
    \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
    \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
    # Avoid chmod /config
    && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done

--- a/resiliosync/config.json
+++ b/resiliosync/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/scrutiny/config.json
+++ b/scrutiny/config.json
@@ -1,6 +1,6 @@
 {
  "apparmor": "true",
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64"
  ],
--- a/scrutiny_fa/config.json
+++ b/scrutiny_fa/config.json
@@ -1,6 +1,6 @@
 {
  "apparmor": "true",
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64"
  ],
--- a/seafile/config.json
+++ b/seafile/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/sonarr/Dockerfile
+++ b/sonarr/Dockerfile
@@ -35,15 +35,15 @@ RUN \
    # Avoid custom-init.d duplications
    for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
    \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
    \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
    # Avoid chmod /config
    && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done

--- a/sonarr/config.json
+++ b/sonarr/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/spotweb/config.json
+++ b/spotweb/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/tandoor_recipes/config.json
+++ b/tandoor_recipes/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/tdarr/config.json
+++ b/tdarr/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/teamspeak/config.json
+++ b/teamspeak/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/transmission/Dockerfile
+++ b/transmission/Dockerfile
@@ -34,15 +34,15 @@ RUN \
    # Avoid custom-init.d duplications
    for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
    \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
    \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
    # Avoid chmod /config
    && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done

--- a/transmission/config.json
+++ b/transmission/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/transmission_openvpn/config.json
+++ b/transmission_openvpn/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/ubooquity/Dockerfile
+++ b/ubooquity/Dockerfile
@@ -44,15 +44,15 @@ RUN \
    # Avoid custom-init.d duplications
    for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
    \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
    \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
    # Avoid chmod /config
    && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done

--- a/ubooquity/config.json
+++ b/ubooquity/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/unpackerr/config.json
+++ b/unpackerr/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/webtop_kde/Dockerfile
+++ b/webtop_kde/Dockerfile
@@ -47,15 +47,15 @@ RUN \
    # Avoid custom-init.d duplications
    for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
    \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
    # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
    \
    # Correct config location
    && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
    \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
    # Avoid chmod /config
    && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done

--- a/webtop_kde/config.json
+++ b/webtop_kde/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/webtrees/config.json
+++ b/webtrees/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/whoogle/config.json
+++ b/whoogle/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/xteve/config.json
+++ b/xteve/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"
--- a/zoneminder/config.json
+++ b/zoneminder/config.json
@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
    "aarch64",
    "amd64",
    "armv7"