Correction

addons_updater/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

arpspoof/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

bazarr/Dockerfile

@@ -34,15 +34,15 @@ RUN \
     # Avoid custom-init.d duplications
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
     \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
     # Avoid chmod /config
     && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done
 

bazarr/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

bitwarden/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

booksonic_air/Dockerfile

@@ -36,15 +36,15 @@ RUN \
     # Avoid custom-init.d duplications
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
     \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
     # Avoid chmod /config
     && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done
 

booksonic_air/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

calibre/Dockerfile

@@ -35,15 +35,15 @@ RUN \
     # Avoid custom-init.d duplications
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
     \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
     # Avoid chmod /config
     && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done
 

calibre/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

calibre_web/Dockerfile

@@ -35,15 +35,15 @@ RUN \
     # Avoid custom-init.d duplications
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
     \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
     # Avoid chmod /config
     && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done
 

calibre_web/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

cloudcommander/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

code-server/Dockerfile

@@ -34,15 +34,15 @@ RUN \
     # Avoid custom-init.d duplications
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
     \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
     # Avoid chmod /config
     && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done
 

code-server/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

elasticsearch/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64"
   ],

emby/Dockerfile

@@ -34,15 +34,15 @@ RUN \
     # Avoid custom-init.d duplications
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
     \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
     # Avoid chmod /config
     && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done
 

emby/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

enedisgateway2mqtt/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

enedisgateway2mqtt_dev/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

epicgamesfree/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64"
   ],

filebrowser/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

fireflyiii/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

fireflyiii_data_importer/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

fireflyiii_fints_importer/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "amd64"
   ],
   "codenotary": "alexandrep.github@gmail.com",

flaresolverr/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

flexget/Dockerfile

@@ -44,15 +44,15 @@ RUN \
     # Avoid custom-init.d duplications
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
     \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
     # Avoid chmod /config
     && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done
 

flexget/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

gazpar2mqtt/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

gitea/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64"
   ],

grav/Dockerfile

@@ -34,15 +34,15 @@ RUN \
     # Avoid custom-init.d duplications
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
     \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
     # Avoid chmod /config
     && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done
 

grav/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

guacamole/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "amd64",
     "aarch64"
   ],

inadyn/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

jackett/Dockerfile

@@ -34,15 +34,15 @@ RUN \
     # Avoid custom-init.d duplications
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
     \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
     # Avoid chmod /config
     && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done
 

jackett/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

jellyfin/Dockerfile

@@ -35,15 +35,15 @@ RUN \
     # Avoid custom-init.d duplications
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
     \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
     # Avoid chmod /config
     && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done
 

jellyfin/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

joal/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

joplin/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

lidarr/Dockerfile

@@ -34,15 +34,15 @@ RUN \
     # Avoid custom-init.d duplications
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
     \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
     # Avoid chmod /config
     && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done
 

lidarr/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

mealie/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

mylar3/Dockerfile

@@ -34,15 +34,15 @@ RUN \
     # Avoid custom-init.d duplications
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
     \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
     # Avoid chmod /config
     && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done
 

mylar3/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

nextcloud/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

nzbget/Dockerfile

@@ -38,15 +38,15 @@ RUN \
     # Avoid custom-init.d duplications
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
     \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
     # Avoid chmod /config
     && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done
 

nzbget/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

omada/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64"
   ],

ombi/Dockerfile

@@ -34,15 +34,15 @@ RUN \
     # Avoid custom-init.d duplications
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
     \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
     # Avoid chmod /config
     && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done
 

ombi/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

organizr/Dockerfile

@@ -33,15 +33,15 @@ RUN \
     # Avoid custom-init.d duplications
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
     \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
     # Avoid chmod /config
     && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done
 

organizr/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

overseerr/Dockerfile

@@ -35,15 +35,15 @@ RUN \
     # Avoid custom-init.d duplications
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
     \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
     # Avoid chmod /config
     && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done
 

overseerr/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

paperless_ngx/Dockerfile

@@ -34,15 +34,15 @@ RUN \
     # Avoid custom-init.d duplications
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
     \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
     # Avoid chmod /config
     && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done
 

paperless_ngx/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

papermerge/Dockerfile

@@ -41,15 +41,15 @@ RUN \
     # Avoid custom-init.d duplications
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
     \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
     # Avoid chmod /config
     && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done
 

papermerge/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

photoprism/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64"
   ],

piwigo/Dockerfile

@@ -34,15 +34,15 @@ RUN \
     # Avoid custom-init.d duplications
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
     \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
     # Avoid chmod /config
     && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done
 

piwigo/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

plex/Dockerfile

@@ -43,15 +43,15 @@ RUN \
     # Avoid custom-init.d duplications
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
     \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
     # Avoid chmod /config
     && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done
 

plex/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

plex_meta_manager/Dockerfile

@@ -42,15 +42,15 @@ RUN \
     # Avoid custom-init.d duplications
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
     \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
     # Avoid chmod /config
     && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done
 

plex_meta_manager/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

portainer/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

prowlarr/Dockerfile

@@ -34,15 +34,15 @@ RUN \
     # Avoid custom-init.d duplications
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
     \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
     # Avoid chmod /config
     && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done
 

prowlarr/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

qbittorrent/Dockerfile

@@ -57,15 +57,15 @@ RUN \
     # Avoid custom-init.d duplications
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
     \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
     # Avoid chmod /config
     && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done \
     \

qbittorrent/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

radarr/Dockerfile

@@ -34,15 +34,15 @@ RUN \
     # Avoid custom-init.d duplications
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
     \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
     # Avoid chmod /config
     && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done
 

radarr/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

readarr/Dockerfile

@@ -35,15 +35,15 @@ RUN \
     # Avoid custom-init.d duplications
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
     \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
     # Avoid chmod /config
     && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done
 

readarr/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

requestrr/Dockerfile

@@ -34,15 +34,15 @@ RUN \
     # Avoid custom-init.d duplications
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
     \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
     # Avoid chmod /config
     && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done
 

requestrr/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

resiliosync/Dockerfile

@@ -46,15 +46,15 @@ RUN \
     # Avoid custom-init.d duplications
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
     \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
     # Avoid chmod /config
     && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done
 

resiliosync/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

scrutiny/config.json

@@ -1,6 +1,6 @@
 {
   "apparmor": "true",
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64"
   ],

scrutiny_fa/config.json

@@ -1,6 +1,6 @@
 {
   "apparmor": "true",
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64"
   ],

seafile/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

sonarr/Dockerfile

@@ -35,15 +35,15 @@ RUN \
     # Avoid custom-init.d duplications
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
     \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
     # Avoid chmod /config
     && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done
 

sonarr/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

spotweb/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

tandoor_recipes/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

tdarr/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

teamspeak/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

transmission/Dockerfile

@@ -34,15 +34,15 @@ RUN \
     # Avoid custom-init.d duplications
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
     \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
     # Avoid chmod /config
     && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done
 

transmission/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

transmission_openvpn/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

ubooquity/Dockerfile

@@ -44,15 +44,15 @@ RUN \
     # Avoid custom-init.d duplications
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
     \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
     # Avoid chmod /config
     && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done
 

ubooquity/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

unpackerr/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

webtop_kde/Dockerfile

@@ -47,15 +47,15 @@ RUN \
     # Avoid custom-init.d duplications
     for file in $(grep -sril 'Potential tampering with custom' /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do rm -f "$file"; done \
     \
+    # Create new config folder if needed
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
+    \
     # Allow UID and GID setting
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID' ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID' ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
+    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i 's/bash/bashio/g' "$file" && sed -i '1a PUID="$(if [ -n $(bashio::config 'PUID') ]; then echo "0"; else bashio::config 'PUID'; fi)"' "$file" && sed -i '1a PGID="$(if [ -n $(bashio::config 'PGID') ]; then echo "0"; else bashio::config 'PGID'; fi)"' "$file"; done \
     \
     # Correct config location
     && for file in $(grep -Esril "/config[ '\"/]|/config\$" /etc/logrotate.d /defaults /etc/cont-init.d /etc/services.d /etc/s6-overlay/s6-rc.d); do sed -i "s=/config=$CONFIGLOCATION=g" "$file"; done \
     \
-    # Create new config folder if needed
-    && for file in $(grep -srl "PUID:-911" /etc/cont-init.d /etc/s6-overlay/s6-rc.d); do sed -i "1a mkdir -p $CONFIGLOCATION" "$file"; done \
-    \
     # Avoid chmod /config
     && for files in /etc/services.d/*/* /etc/cont-init.d/* /etc/s6-overlay/s6-rc.d/*/*;do if [ -f $files ] && [[ ! -z $(awk '/chown.*abc:abc.*\\/,/.*\/config( |$)/{print FILENAME}' "$files") ]] ; then sed -i "s|/config$|/data|g" "$files"; fi ;done
 

webtop_kde/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

webtrees/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

whoogle/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

xteve/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"

zoneminder/config.json

@@ -1,5 +1,5 @@
 {
-  "arch": [
+  "arch2": [
     "aarch64",
     "amd64",
     "armv7"