Merge remote-tracking branch 'origin/master' into create-pull-request/patch-1788655917

# Conflicts:
#	.claude/skills/hassio-addon-workflow/scripts/pr_review.sh

Co-authored-by: alexbelgium <44178713+alexbelgium@users.noreply.github.com>

.claude/skills/hassio-addon-workflow/references/traps.md

@@ -254,13 +254,38 @@ without your involvement — another reason a shared checkout goes stale mid-tas
 **Reviewers**: CodeRabbit (deepest — often runs scripts to prove a claim; reviews ~9 minutes
 after the PR opens, or on `@coderabbitai review`), chatgpt-codex-connector, Copilot, Codacy.
 
-**Codacy `action_required` is this repo's normal state.** Other open PRs show the same. It
-exposes no annotations via the API, so its findings are only visible in the maintainer's Codacy
-account. Note it and move on rather than guessing.
+**Codacy is red on essentially every add-on PR and gates nothing.** `gh pr checks` reports it as
+`fail` (older runs showed `action_required`); #3019, #3044 and #3050 all merged with it failing,
+and `master` carries no branch protection, so no check is required in the GitHub sense. It exposes
+no annotations via the API, so its findings are only visible in the maintainer's Codacy account.
+Note it and move on rather than guessing. `pr_review.sh watch` therefore prints it every poll but
+keeps it out of the verdict — the one check on that list, which is a denylist of known noise, not
+an allowlist of gates, so a job added to CI later counts as blocking until someone exempts it.
 
 **Resolving a review thread requires GraphQL** (`resolveReviewThread`); the REST API cannot do it.
 `scripts/pr_review.sh` wraps fetch / reply / resolve.
 
+**`gh pr checks` output is TAB-separated, and every blocking gate here has spaces in its name.**
+Parsing it with awk's default field splitting truncates each check to its first word and reads the
+wrong column as the state: `Codacy Static Code Analysis<TAB>fail` becomes `Codacy=Static`, and
+`Test addon build (wger)<TAB>pending` becomes `Test=addon`. A `case` over that string then matches
+neither `*fail*` nor `*pending*` and falls through to the "all passing" branch — the failure mode
+that makes a CI-reporting command lie. `pr_review.sh watch` called #3044 green while Codacy was
+red, and on #3042 printed "settled — all passing" while the HA add-on linter was failing; it would
+also have called a build that had not started a pass. Use `awk -F'\t'`, judge the state column
+alone (never the joined `name=state` text, or a check named `flaky-fail-detector` reads as a
+failure), and treat an unrecognised state as a failure instead of letting it reach the passing
+branch. Fixed in #3052.
+
+The TSV is gh's *non-TTY* renderer, which is what `$(gh pr checks ... | awk)` always gets; attached
+to a terminal the same command prints a coloured, aligned table with a summary line, so never
+sanity-check the format by eye in a shell and assume the script sees that. `gh pr checks --json`
+would be sturdier, and Copilot recommends it (#3052), but it does not exist before gh 2.36 and the
+add-on ships 2.23 — it fails with `unknown flag: --json`. The parse is therefore built to fail
+safe instead: states are allowlisted, so a header row would land in the failure branch and a
+space-aligned table would parse to zero rows and keep `watch` waiting. Either way it cannot
+return a false pass.
+
 **CHANGELOG heading dates are ISO, whatever the bots' defaults say.** Match the format already in
 the add-on's file. Repo-wide that is `## <version> (YYYY-MM-DD)`: 7705 dated headings against 363
 in `DD-MM-YYYY`, and the newest entry is ISO in 125 of 135 add-ons. Copilot flags an ISO file that

.claude/skills/hassio-addon-workflow/scripts/env_trace.sh

@@ -30,8 +30,14 @@ VAR="${1:?usage: env_trace.sh <VAR> [process-name-or-pid]}"
 TARGET="${2:-}"
 # VAR is interpolated into grep/sed patterns below — restrict it to a valid env var name
 case "$VAR" in
-    [A-Za-z_]*) [ -z "${VAR//[A-Za-z0-9_]/}" ] || { echo "invalid env var name: $VAR" >&2; exit 1; } ;;
-    *) echo "invalid env var name: $VAR" >&2; exit 1 ;;
+    [A-Za-z_]*) [ -z "${VAR//[A-Za-z0-9_]/}" ] || {
+        echo "invalid env var name: $VAR" >&2
+        exit 1
+    } ;;
+    *)
+        echo "invalid env var name: $VAR" >&2
+        exit 1
+        ;;
 esac
 
 echo "== tracing ${VAR} =="
@@ -39,7 +45,7 @@ echo
 
 echo "1. /data/options.json (the user's saved options)"
 if [ -f /data/options.json ]; then
-    python3 - "$VAR" <<'PY'
+    python3 - "$VAR" << 'PY'
 import json, sys
 var = sys.argv[1]
 try:
@@ -80,7 +86,8 @@ echo "3. s6 container_environment (only read by services using #!/usr/bin/with-c
 seen3=0
 for d in /var/run/s6/container_environment /run/s6/container_environment; do
     if [ -f "$d/$VAR" ]; then
-        echo "   $d/$VAR = [$(cat "$d/$VAR")]"; seen3=1
+        echo "   $d/$VAR = [$(cat "$d/$VAR")]"
+        seen3=1
     fi
 done
 [ "$seen3" -eq 0 ] && echo "   not present in either envdir"
@@ -122,8 +129,8 @@ else
                 done
             fi
             # What it was actually launched with beats any theory about its environment.
-            tr '\0' '\n' < "/proc/$pid/cmdline" 2> /dev/null | tail -n +2 |
-                grep -iE "res|screen|${VAR}" | head -3 | sed 's/^/     argv: /'
+            tr '\0' '\n' < "/proc/$pid/cmdline" 2> /dev/null | tail -n +2 \
+                | grep -iE "res|screen|${VAR}" | head -3 | sed 's/^/     argv: /'
         done
     fi
 fi

.claude/skills/hassio-addon-workflow/scripts/measure.sh

@@ -31,7 +31,7 @@ awk '{t+=$2} END{printf "  threads=%d\n", t}' <(ps -eo pid,nlwp --no-headers 2>
 echo
 echo "== per-process memory (top 20 by PSS) =="
 printf '  %-28s %8s %8s %8s\n' COMMAND RSS PSS PRIVATE
-python3 - "$OUT" <<'PY'
+python3 - "$OUT" << 'PY'
 import os, sys
 rows = []
 for pid in filter(str.isdigit, os.listdir('/proc')):
@@ -62,17 +62,17 @@ PY
 
 echo
 echo "== reserved-but-not-resident (lazy allocations, NOT leaks) =="
-ipcs -m 2>/dev/null | awk 'NR>3 && $5 ~ /^[0-9]+$/ && $5 > 50000000 {printf "  SysV shm %.0f MB (owner %s) — check Rss in /proc/<pid>/smaps before calling it used\n", $5/1048576, $3}'
+ipcs -m 2> /dev/null | awk 'NR>3 && $5 ~ /^[0-9]+$/ && $5 > 50000000 {printf "  SysV shm %.0f MB (owner %s) — check Rss in /proc/<pid>/smaps before calling it used\n", $5/1048576, $3}'
 
 echo
 echo "== CPU over ${SAMPLE}s (idle unless you are driving the UI) =="
 # utime+stime. Parsed after the LAST ')' because field 2 is (comm) and may contain spaces —
 # a plain $14+$15 is wrong for anything like 'npm exec @foo' and silently reports a fabricated
 # number rather than failing.
-jiffies() { awk -F') ' '{n=split($NF,a," "); print a[12]+a[13]}' "/proc/$1/stat" 2>/dev/null; }
+jiffies() { awk -F') ' '{n=split($NF,a," "); print a[12]+a[13]}' "/proc/$1/stat" 2> /dev/null; }
 
 # jiffies are USER_HZ units — almost always 100, but read it rather than assume it
-HZ=$(getconf CLK_TCK 2>/dev/null) && [ "$HZ" -gt 0 ] 2>/dev/null || HZ=100
+HZ=$(getconf CLK_TCK 2> /dev/null) && [ "$HZ" -gt 0 ] 2> /dev/null || HZ=100
 
 # Sample EVERY readable process, not the top-N of ps.txt: that list is sorted by RSS,
 # and the busiest process is not necessarily a big one.
@@ -86,14 +86,14 @@ for pid in "${!t0[@]}"; do
     [ -r "/proc/$pid/stat" ] || continue
     t1=$(jiffies "$pid") || continue
     [ -n "$t1" ] && [ -n "${t0[$pid]}" ] || continue
-    delta=$(( t1 - ${t0[$pid]} ))
+    delta=$((t1 - ${t0[$pid]}))
     [ "$delta" -gt 0 ] || continue
     pct=$(awk -v d="$delta" -v s="$SAMPLE" -v hz="$HZ" 'BEGIN{printf "%.2f", d*100/(hz*s)}')
-    comm=$(tr -d '\0' < "/proc/$pid/comm" 2>/dev/null)
+    comm=$(tr -d '\0' < "/proc/$pid/comm" 2> /dev/null)
     echo "$pct $pid $comm"
 done | sort -rn | head -12 | awk '{printf "  %6s%%  %-8s %s\n", $1, $2, $3}'
 
 echo
-echo "  established conns on :8082/:3000/:3001 = $(ss -tn 2>/dev/null | grep -cE 'ESTAB.*:(8082|3000|3001)')"
+echo "  established conns on :8082/:3000/:3001 = $(ss -tn 2> /dev/null | grep -cE 'ESTAB.*:(8082|3000|3001)')"
 echo "  (those are claude_desktop/webtop viewer ports; 0 here means CPU above is idle burn)"
 echo "  raw ps: $OUT/ps.txt"

.claude/skills/hassio-addon-workflow/scripts/pr_review.sh

@@ -8,6 +8,10 @@
 #   pr_review.sh resolve <PR> <THREAD_ID...|--all>   --all = every unresolved, asks first
 #   pr_review.sh watch   <PR> [minutes]        poll checks (run this backgrounded)
 #
+# watch exits 0 when every blocking check passed *or was skipped* — a PR touching no add-on
+# skips all three gates, and it says so — 1 on failure, 2 if it ran out of minutes. Codacy is
+# advisory here: printed every poll, excluded from the verdict.
+#
 # Reviewers seen here: coderabbitai (deepest; reviews ~9 min after open, or on
 # "@coderabbitai review"), chatgpt-codex-connector, Copilot, Codacy.
 #
@@ -21,7 +25,7 @@ REPO="${HASSIO_REPO:-}"
 [ -z "$REPO" ] && { echo "cannot determine repo; set HASSIO_REPO=owner/name" >&2; exit 1; }
 echo "repo: $REPO" >&2
 CMD="${1:-}"; PR="${2:-}"
-[ -z "$CMD" ] || [ -z "$PR" ] && { sed -n '2,16p' "$0" | sed 's/^# \?//'; exit 1; }
+[ -z "$CMD" ] || [ -z "$PR" ] && { sed -n '2,20p' "$0" | sed 's/^# \?//'; exit 1; }
 
 case "$CMD" in
 list)
@@ -90,25 +94,72 @@ resolve)
     ;;
 watch)
     MINS="${3:-180}"   # the addon build alone has taken ~3h; 20 was far too short
+    # Checks that are red on essentially every add-on PR here and gate nothing: master carries no
+    # branch protection, and #3019, #3044 and #3050 all merged with Codacy failing. They are kept
+    # out of the verdict but always printed, so the reader still sees them and can judge. This is
+    # deliberately a denylist of known noise, not an allowlist of blocking checks — a job added to
+    # CI later counts as blocking until someone puts it here on purpose.
+    ADVISORY_CHECKS="Codacy Static Code Analysis"   # one per line if more are ever added
     wfail=2            # not 0: running out of minutes with checks still pending is not a pass
+    c=""; bstates=""; adv=""
     for i in $(seq 1 "$MINS"); do
-        c=$(gh pr checks "$PR" 2> /dev/null | awk '{print $1"="$2}' | tr '\n' ' ')
-        if [ -z "$c" ]; then
+        # gh pr checks emits TAB-separated columns with no header when its output is not a TTY,
+        # which inside this $(... | awk) it never is. (Attached to a terminal it prints a wholly
+        # different ANSI table; --json would be sturdier still but does not exist before gh 2.36,
+        # and 2.23 ships here.) Every blocking gate has spaces in its name — "Addon linting
+        # (wger)", "Test addon build (wger)" — so awk's default separator split them on
+        # whitespace: "Codacy Static Code Analysis<TAB>fail" became "Codacy=Static" and the state
+        # column was never read at all. watch printed "all passing" on a red #3044 and on #3042
+        # with the linter failing, and could not see a pending build either.
+        # If that format ever does change, the allowlist below fails safe rather than passing: a
+        # header row lands in the failure branch, and a space-aligned table parses to no rows,
+        # which keeps watch waiting instead of returning 0.
+        rows=$(gh pr checks "$PR" 2> /dev/null | awk -F'\t' -v ADV="$ADVISORY_CHECKS" '
+            BEGIN { n = split(ADV, a, "\n"); for (j = 1; j <= n; j++) adv[a[j]] = 1 }
+            NF >= 2 { print (($1 in adv) ? "A" : "B") "\t" $1 "=" $2 "\t" $2 }')
+        if [ -z "$rows" ]; then
             # Normal in the first minutes after `gh pr create`, and also whenever gh errors.
             # Calling that "settled" would report success for checks that never ran.
             echo "[$i] no checks reported yet (gh returned nothing) — still waiting"
             sleep 60; continue
         fi
+        c=$(printf '%s\n' "$rows" | cut -f2 | tr '\n' ' ')
         echo "[$i] $c"
-        case "$c" in
-        *pending*) sleep 60 ;;
-        *fail* | *error* | *cancel*) echo "settled — with FAILURES (see above)"; wfail=1; break ;;
-        *) echo "settled — all passing"; wfail=0; break ;;
-        esac
+        # Judge the state column only, never the joined name=state line: a check whose NAME
+        # contains "fail" must not read as a failure.
+        bstates=$(printf '%s\n' "$rows" | awk -F'\t' '$1 == "B" { print $3 }' | tr '\n' ' ')
+        adv=$(printf '%s\n' "$rows" | awk -F'\t' '$1 == "A" { print $2 }' | tr '\n' ' ')
+        if [ -z "$bstates" ]; then
+            echo "  only advisory checks have reported — no blocking check has run yet"
+            sleep 60; continue
+        fi
+        # Allowlist the good states rather than denylisting the bad ones: an unrecognised state
+        # must land in the failure branch, because falling through to "passing" is this command's
+        # worst outcome.
+        nbad=0; npend=0
+        for s in $bstates; do
+            case "$s" in
+            pass | skipping) ;;
+            pending) npend=$((npend + 1)) ;;
+            *) nbad=$((nbad + 1)) ;;
+            esac
+        done
+        if [ "$nbad" -gt 0 ]; then
+            echo "settled — blocking checks FAILED:"
+            printf '%s\n' "$rows" |
+                awk -F'\t' '$1 == "B" && $3 != "pass" && $3 != "skipping" && $3 != "pending" { print "    " $2 }'
+            wfail=1; break
+        elif [ "$npend" -gt 0 ]; then
+            sleep 60; continue
+        else
+            echo "settled — blocking checks passing"; wfail=0; break
+        fi
     done
     [ "$wfail" -eq 2 ] && echo "gave up after ${MINS}m, checks still unsettled — NOT a pass"
+    # Printed on pass and on failure alike: it is excluded from the verdict, not hidden.
+    [ -n "$adv" ] && echo "  advisory (non-blocking, not counted in the verdict): $adv"
     # A PR touching no */config.* skips the CHANGELOG, linter and build jobs outright (#3018).
-    case "${c:-}" in *skipping*) echo "  ...of which some were SKIPPED — a skipped job tested nothing" ;; esac
+    case " $bstates " in *" skipping "*) echo "  ...of which some were SKIPPED — a skipped job tested nothing" ;; esac
     echo "note: long queues here are usually account runner contention, not your diff."
     exit "$wfail"
     ;;

.claude/skills/hassio-addon-workflow/scripts/preflight.sh

@@ -47,7 +47,10 @@ if [ -n "${BUILD_VERSION:-}" ]; then
     if [ -z "$SLUG" ] && [ -n "${HOSTNAME:-}" ]; then
         base=$(printf '%s' "$HOSTNAME" | sed 's/^[0-9a-f]\{8\}-//')
         for cand in "$(printf '%s' "$base" | tr '-' '_')" "$base"; do
-            [ -f "$REPO/$cand/config.yaml" ] && { SLUG="$cand"; break; }
+            [ -f "$REPO/$cand/config.yaml" ] && {
+                SLUG="$cand"
+                break
+            }
         done
         [ -z "$SLUG" ] && SLUG="$base"
     fi
@@ -69,8 +72,8 @@ if [ -n "${BUILD_VERSION:-}" ]; then
         else
             echo "  MISMATCH — this branch is NOT what is running."
             git fetch origin master --quiet 2> /dev/null
-            master=$(git show origin/master:"$SLUG/config.yaml" 2> /dev/null |
-                grep -E '^version:' | head -1 | tr -d "\"'" | awk '{print $2}')
+            master=$(git show origin/master:"$SLUG/config.yaml" 2> /dev/null \
+                | grep -E '^version:' | head -1 | tr -d "\"'" | awk '{print $2}')
             echo "  origin/master version = ${master:-unknown}"
             echo "  -> work from origin/master; analysing this branch will mislead you."
             echo

.claude/skills/hassio-addon-workflow/scripts/validate.sh

@@ -13,22 +13,31 @@ set -uo pipefail
 if root=$(git rev-parse --show-toplevel 2> /dev/null); then cd "$root" || exit 1; fi
 
 ADDON="${1:-}"
-[ "${ADDON:-}" = "--vs-master" ] && { ADDON=""; set -- --vs-master; }
+[ "${ADDON:-}" = "--vs-master" ] && {
+    ADDON=""
+    set -- --vs-master
+}
 VS_MASTER=false
 for a in "$@"; do [ "$a" = "--vs-master" ] && VS_MASTER=true; done
 
 if [ -z "$ADDON" ]; then
-    mapfile -t _dirs < <(git diff --name-only origin/master...HEAD 2> /dev/null |
-        cut -d/ -f1 | sort -u | grep -vE '^\.' )
+    mapfile -t _dirs < <(git diff --name-only origin/master...HEAD 2> /dev/null \
+        | cut -d/ -f1 | sort -u | grep -vE '^\.')
     if [ "${#_dirs[@]}" -gt 1 ]; then
         echo "several changed dirs: ${_dirs[*]}"
-        echo "pass one explicitly: validate.sh <addon-dir>"; exit 1
+        echo "pass one explicitly: validate.sh <addon-dir>"
+        exit 1
     fi
     ADDON="${_dirs[0]:-}"
 fi
-[ -z "$ADDON" ] && { echo "usage: validate.sh <addon-dir> [--vs-master]"; exit 1; }
+[ -z "$ADDON" ] && {
+    echo "usage: validate.sh <addon-dir> [--vs-master]"
+    exit 1
+}
 git rev-parse --verify origin/master > /dev/null 2>&1 || {
-    echo "origin/master missing — run: git fetch origin master"; exit 1; }
+    echo "origin/master missing — run: git fetch origin master"
+    exit 1
+}
 export PYTHONDONTWRITEBYTECODE=1
 echo "== validating $ADDON =="
 
@@ -36,14 +45,22 @@ fail=0
 note() { printf '  %-13s %s\n' "$1" "$2"; }
 # execline `run`/`finish` files are not shell (25 of them here, across 21 add-ons). Neither
 # linter below can read one, so anything either says about it is noise.
-is_execline() { local l; IFS= read -r l < "$1" 2> /dev/null; [[ $l == '#!'*execlineb* ]]; }
+is_execline() {
+    local l
+    IFS= read -r l < "$1" 2> /dev/null
+    [[ $l == '#!'*execlineb* ]]
+}
 
 # Shell: bash -n then shellcheck -x (follows sourced files, as CI does). One list for both.
 files=()
 while IFS= read -r f; do is_execline "$f" || files+=("$f"); done \
     < <(find "$ADDON" -type f \( -name '*.sh' -o -name 'run' -o -name 'finish' -o -name 'autostart' \) 2> /dev/null)
 for f in "${files[@]}"; do
-    if ! out=$(bash -n "$f" 2>&1); then note "bash -n" "FAIL $f"; echo "$out" | sed 's/^/      /'; fail=1; fi
+    if ! out=$(bash -n "$f" 2>&1); then
+        note "bash -n" "FAIL $f"
+        echo "$out" | sed 's/^/      /'
+        fail=1
+    fi
 done
 [ "$fail" -eq 0 ] && note "bash -n" "${#files[@]} file(s) checked"
 
@@ -65,13 +82,16 @@ command -v hadolint > /dev/null 2>&1 && [ -f "$ADDON/Dockerfile" ] && {
 
 if [ -f "$ADDON/config.yaml" ]; then
     # path passed as argv, never interpolated into Python source
-    python3 - "$ADDON/config.yaml" <<'PY' || { note "config.yaml" "FAIL parse"; fail=1; }
+    python3 - "$ADDON/config.yaml" << 'PY' || {
 import yaml,sys
 d=yaml.safe_load(open(sys.argv[1]))
 print('  %-13s ok (version=%s, %d options)' % ('config.yaml', d.get('version'), len(d.get('options') or {})))
 missing=[k for k in (d.get('options') or {}) if k not in (d.get('schema') or {})]
 if missing: print('  %-13s options with no schema entry: %s' % ('WARN', missing)); sys.exit(0)
 PY
+        note "config.yaml" "FAIL parse"
+        fail=1
+    }
     command -v yamllint > /dev/null 2>&1 && {
         yl=$(yamllint -f parsable "$ADDON/config.yaml" 2>&1 | grep -c .)
         note "yamllint" "$yl finding(s) (compare with --vs-master)"
@@ -79,7 +99,10 @@ PY
 fi
 
 while IFS= read -r f; do
-    python3 -m py_compile "$f" 2> /dev/null || { note "py_compile" "FAIL $f"; fail=1; }
+    python3 -m py_compile "$f" 2> /dev/null || {
+        note "py_compile" "FAIL $f"
+        fail=1
+    }
 done < <(find "$ADDON" -type f -name '*.py' 2> /dev/null)
 
 $VS_MASTER && command -v npx > /dev/null 2>&1 && [ -f "$ADDON/CHANGELOG.md" ] && {
@@ -96,7 +119,8 @@ if git diff --name-only origin/master...HEAD 2> /dev/null | grep -Fxq "$ADDON/CH
     note "CHANGELOG" "updated"
 else
     # This one IS gated: onpr_check-pr.yaml exits 1 without it.
-    note "CHANGELOG" "NOT UPDATED for $ADDON — CI hard-gates this"; fail=1
+    note "CHANGELOG" "NOT UPDATED for $ADDON — CI hard-gates this"
+    fail=1
 fi
 if git diff origin/master...HEAD -- "$ADDON/config.yaml" 2> /dev/null | grep -q '^+version:'; then
     note "version" "bumped"
@@ -110,7 +134,8 @@ note "docker build" "NOT tested locally (dockerd unavailable) — CI is the only
 if $VS_MASTER; then
     echo
     echo "== findings ADDED by this diff (pre-existing ones filtered out) =="
-    tmp=$(mktemp -d); trap 'rm -rf "$tmp"' EXIT
+    tmp=$(mktemp -d)
+    trap 'rm -rf "$tmp"' EXIT
     added=0
     # Fed by process substitution, not a pipe: a pipeline runs this in a subshell, where the
     # findings below could never reach $fail and the verdict would contradict the list.
@@ -125,14 +150,26 @@ if $VS_MASTER; then
         # cancel it out and report a false clean.
         case "$f" in
             *.sh | *autostart | */run | */finish)
-                command -v shellcheck > /dev/null 2>&1 || { echo "  $f: SKIPPED (shellcheck not installed)"; continue; }
-                cmd() { shellcheck -x -f gcc "$1" 2>&1 | sed 's/^[^:]*:[0-9]*:[0-9]*://'; } ;;
+                command -v shellcheck > /dev/null 2>&1 || {
+                    echo "  $f: SKIPPED (shellcheck not installed)"
+                    continue
+                }
+                cmd() { shellcheck -x -f gcc "$1" 2>&1 | sed 's/^[^:]*:[0-9]*:[0-9]*://'; }
+                ;;
             *.yaml | *.yml)
-                command -v yamllint > /dev/null 2>&1 || { echo "  $f: SKIPPED (yamllint not installed)"; continue; }
-                cmd() { yamllint -f parsable "$1" 2>&1 | sed 's/^[^:]*//; s/^:[0-9]*:[0-9]*//'; } ;;
+                command -v yamllint > /dev/null 2>&1 || {
+                    echo "  $f: SKIPPED (yamllint not installed)"
+                    continue
+                }
+                cmd() { yamllint -f parsable "$1" 2>&1 | sed 's/^[^:]*//; s/^:[0-9]*:[0-9]*//'; }
+                ;;
             *Dockerfile)
-                command -v hadolint > /dev/null 2>&1 || { echo "  $f: SKIPPED (hadolint not installed)"; continue; }
-                cmd() { hadolint "$1" 2>&1 | sed 's/^[^:]*//; s/^:[0-9]*//'; } ;;
+                command -v hadolint > /dev/null 2>&1 || {
+                    echo "  $f: SKIPPED (hadolint not installed)"
+                    continue
+                }
+                cmd() { hadolint "$1" 2>&1 | sed 's/^[^:]*//; s/^:[0-9]*//'; }
+                ;;
             *) continue ;;
         esac
         b=$(cmd "$tmp/base" | sort)
@@ -141,7 +178,8 @@ if $VS_MASTER; then
         [ -n "$new" ] && {
             echo "  $f: $(printf '%s\n' "$new" | grep -c .) NEW finding(s)"
             printf '%s\n' "$new" | sed 's/^/      /' | head -5
-            added=1; fail=1
+            added=1
+            fail=1
         }
     done < <(git diff --name-only origin/master...HEAD -- "$ADDON" 2> /dev/null)
     [ "$added" -eq 0 ] && echo "  (none — this diff introduced no new lint findings)"

.github/prompts/issue-classify.md

@@ -40,7 +40,7 @@ the check is a guard, not a common case.)
 ## Rule 1 — pick exactly one verdict
 
 | verdict | when |
-|---|---|
+| --- | --- |
 | `duplicate` | An existing open or closed issue reports the same thing. Set `duplicate_of`. |
 | `needs-info` | You cannot tell what is wrong without the add-on version, HA version, architecture, config, or the actual log output. |
 | `question` | A usage question answerable from `DOCS.md`, the wiki, or the add-on config. Not a defect. |

.github/prompts/issue-fix.md

@@ -39,7 +39,7 @@ rest are on you: nothing checks them, so breaking one ships silently.
    that value, and compare:
 
    | `version` vs `U` | what to do | example |
-   |---|---|---|
+   | --- | --- | --- |
    | identical | **append** `.1` | sonarr `4.0.19.3001` -> `4.0.19.3001.1` |
    | `U` + `.` + digits | **increment** those digits | radarr `6.3.0.10514.1` -> `6.3.0.10514.2` |
    | anything else | **leave it alone** | plex, readarr, joal |

.github/scripts/ai_guard_paths.sh

@@ -44,7 +44,7 @@ for pr in $PRS; do
         echo "$BAD"
         # Ensure the label exists before adding it — with set -e a missing
         # label would abort the whole loop and skip any PRs behind this one.
-        gh label create "ai:blocked" --repo "$REPO" --color ededed >/dev/null 2>&1 || true
+        gh label create "ai:blocked" --repo "$REPO" --color ededed > /dev/null 2>&1 || true
         gh pr ready "$pr" --repo "$REPO" --undo || true
         gh pr edit "$pr" --repo "$REPO" --add-label "ai:blocked"
         gh pr comment "$pr" --repo "$REPO" --body \

.github/scripts/ai_triage_context.sh

@@ -15,110 +15,116 @@ CTX="$OUT/context.md"
 : > "$CTX"
 
 gh issue view "$ISSUE_NUMBER" --repo "$REPO" \
-  --json number,title,body,author,labels,createdAt,comments > "$OUT/issue.json"
+    --json number,title,body,author,labels,createdAt,comments > "$OUT/issue.json"
 
 TITLE=$(jq -r '.title' "$OUT/issue.json")
 
 # ---------------------------------------------------------------- addon slug
 # Titles follow "🐛 [Immich Frame] ENV_VARS arent being picked up".
-RAW=$(sed -n 's/.*\[\([^]]*\)\].*/\1/p' <<<"$TITLE" | head -n1)
+RAW=$(sed -n 's/.*\[\([^]]*\)\].*/\1/p' <<< "$TITLE" | head -n1)
 ADDON=""
 if [ -n "$RAW" ]; then
-  CAND=$(tr '[:upper:] ' '[:lower:]_' <<<"$RAW")
-  # Directory list without checking out any of them.
-  git ls-tree -d --name-only HEAD > "$OUT/dirs.txt"
-  for guess in "$CAND" "${CAND//_/-}" "${CAND//_/.}"; do
-    if grep -qxF "$guess" "$OUT/dirs.txt"; then ADDON="$guess"; break; fi
-  done
-  # Separator-insensitive exact match: a title like "[Calibre-web]" (hyphen)
-  # against a directory named calibre_web (underscore) matches neither exact
-  # guess above, and would otherwise fall through to the substring fallback
-  # below, which picks the shorter "calibre" instead — the wrong add-on.
-  # Stripping -, _, . from both sides before comparing catches this case.
-  if [ -z "$ADDON" ]; then
-    CAND_STRIPPED=$(tr -d '_.-' <<<"$CAND")
-    while IFS= read -r dir; do
-      if [ "$(tr -d '_.-' <<<"$dir")" = "$CAND_STRIPPED" ]; then ADDON="$dir"; break; fi
-    done < "$OUT/dirs.txt"
-  fi
-  # Last resort: longest directory name contained in the candidate.
-  if [ -z "$ADDON" ]; then
-    ADDON=$(awk -v c="$CAND" 'length($0)>2 && index(c,$0){print length($0)"\t"$0}' \
+    CAND=$(tr '[:upper:] ' '[:lower:]_' <<< "$RAW")
+    # Directory list without checking out any of them.
+    git ls-tree -d --name-only HEAD > "$OUT/dirs.txt"
+    for guess in "$CAND" "${CAND//_/-}" "${CAND//_/.}"; do
+        if grep -qxF "$guess" "$OUT/dirs.txt"; then
+            ADDON="$guess"
+            break
+        fi
+    done
+    # Separator-insensitive exact match: a title like "[Calibre-web]" (hyphen)
+    # against a directory named calibre_web (underscore) matches neither exact
+    # guess above, and would otherwise fall through to the substring fallback
+    # below, which picks the shorter "calibre" instead — the wrong add-on.
+    # Stripping -, _, . from both sides before comparing catches this case.
+    if [ -z "$ADDON" ]; then
+        CAND_STRIPPED=$(tr -d '_.-' <<< "$CAND")
+        while IFS= read -r dir; do
+            if [ "$(tr -d '_.-' <<< "$dir")" = "$CAND_STRIPPED" ]; then
+                ADDON="$dir"
+                break
+            fi
+        done < "$OUT/dirs.txt"
+    fi
+    # Last resort: longest directory name contained in the candidate.
+    if [ -z "$ADDON" ]; then
+        ADDON=$(awk -v c="$CAND" 'length($0)>2 && index(c,$0){print length($0)"\t"$0}' \
             "$OUT/dirs.txt" | sort -rn | head -n1 | cut -f2)
-  fi
+    fi
 fi
 
 {
-  echo "# Issue #${ISSUE_NUMBER}"
-  echo
-  echo "Repo: ${REPO}"
-  echo "Addon resolved from title: ${ADDON:-UNRESOLVED}"
-  echo
-  echo "## Title"
-  echo "$TITLE"
-  echo
-  echo "## Author"
-  jq -r '.author.login' "$OUT/issue.json"
-  echo
-  echo "## Body"
-  echo '```'
-  jq -r '.body // "(empty)"' "$OUT/issue.json"
-  echo '```'
-  echo
-  echo "## Existing comments (in order)"
-  jq -r '.comments[]? | "### @\(.author.login)\n\(.body)\n"' "$OUT/issue.json"
-  echo
-  echo "## Existing labels"
-  jq -r '[.labels[]?.name] | join(", ")' "$OUT/issue.json"
+    echo "# Issue #${ISSUE_NUMBER}"
+    echo
+    echo "Repo: ${REPO}"
+    echo "Addon resolved from title: ${ADDON:-UNRESOLVED}"
+    echo
+    echo "## Title"
+    echo "$TITLE"
+    echo
+    echo "## Author"
+    jq -r '.author.login' "$OUT/issue.json"
+    echo
+    echo "## Body"
+    echo '```'
+    jq -r '.body // "(empty)"' "$OUT/issue.json"
+    echo '```'
+    echo
+    echo "## Existing comments (in order)"
+    jq -r '.comments[]? | "### @\(.author.login)\n\(.body)\n"' "$OUT/issue.json"
+    echo
+    echo "## Existing labels"
+    jq -r '[.labels[]?.name] | join(", ")' "$OUT/issue.json"
 } >> "$CTX"
 
 # ------------------------------------------------------------- addon sources
 if [ -n "$ADDON" ]; then
-  {
-    echo
-    echo "## Addon files: ${ADDON}/"
-    # `set` REPLACES the checkout list, so .templates has to be repeated here
-    # or the workflow's sparse-checkout of it is silently undone at this point
-    # — which is exactly the state that starved #2949 of its turn budget.
-    if ! git sparse-checkout set --no-cone .github/prompts .github/scripts .templates "$ADDON" 2>&1; then
-      # Swallowing this used to leave ADDON resolved with no files behind it,
-      # so the classifier could still reach high confidence off the addon
-      # name alone. Say so explicitly, in the same word Rule 2 already keys
-      # its low-confidence check on.
-      echo
-      echo "**Could not check out this add-on's source. Treat as UNRESOLVED for confidence purposes.**"
-    else
-      for f in config.yaml config.json Dockerfile CHANGELOG.md DOCS.md README.md; do
-        [ -f "$ADDON/$f" ] || continue
+    {
         echo
-        echo "### ${ADDON}/${f}"
-        echo '```'
-        head -c 8000 "$ADDON/$f"
-        echo '```'
-      done
+        echo "## Addon files: ${ADDON}/"
+        # `set` REPLACES the checkout list, so .templates has to be repeated here
+        # or the workflow's sparse-checkout of it is silently undone at this point
+        # — which is exactly the state that starved #2949 of its turn budget.
+        if ! git sparse-checkout set --no-cone .github/prompts .github/scripts .templates "$ADDON" 2>&1; then
+            # Swallowing this used to leave ADDON resolved with no files behind it,
+            # so the classifier could still reach high confidence off the addon
+            # name alone. Say so explicitly, in the same word Rule 2 already keys
+            # its low-confidence check on.
+            echo
+            echo "**Could not check out this add-on's source. Treat as UNRESOLVED for confidence purposes.**"
+        else
+            for f in config.yaml config.json Dockerfile CHANGELOG.md DOCS.md README.md; do
+                [ -f "$ADDON/$f" ] || continue
+                echo
+                echo "### ${ADDON}/${f}"
+                echo '```'
+                head -c 8000 "$ADDON/$f"
+                echo '```'
+            done
 
-      echo
-      echo "## Recent commits touching ${ADDON}/"
-      git log -n 15 --date=short --pretty='- %ad %h %s' -- "$ADDON" 2>/dev/null || true
-    fi
-  } >> "$CTX"
+            echo
+            echo "## Recent commits touching ${ADDON}/"
+            git log -n 15 --date=short --pretty='- %ad %h %s' -- "$ADDON" 2> /dev/null || true
+        fi
+    } >> "$CTX"
 fi
 
 # -------------------------------------------------------- possible duplicates
 {
-  echo
-  echo "## Similar existing issues (candidate duplicates)"
-  KEYWORDS=$(tr -cs '[:alnum:]' ' ' <<<"$TITLE" \
-             | tr '[:upper:]' '[:lower:]' \
-             | tr ' ' '\n' | awk 'length($0)>3' | head -n6 | paste -sd' ')
-  # Excludes the issue being triaged: if it's already indexed by GitHub search
-  # by the time this runs, keyword overlap with its own title would otherwise
-  # list it as a "candidate duplicate" of itself.
-  gh search issues --repo "$REPO" --limit 15 \
-     --json number,title,state,url -- "$KEYWORDS" 2>/dev/null \
-    | jq -r --argjson self "$ISSUE_NUMBER" \
-        '.[] | select(.number != $self) | "- #\(.number) [\(.state)] \(.title)"' \
-    || echo "(search unavailable)"
+    echo
+    echo "## Similar existing issues (candidate duplicates)"
+    KEYWORDS=$(tr -cs '[:alnum:]' ' ' <<< "$TITLE" \
+        | tr '[:upper:]' '[:lower:]' \
+        | tr ' ' '\n' | awk 'length($0)>3' | head -n6 | paste -sd' ')
+    # Excludes the issue being triaged: if it's already indexed by GitHub search
+    # by the time this runs, keyword overlap with its own title would otherwise
+    # list it as a "candidate duplicate" of itself.
+    gh search issues --repo "$REPO" --limit 15 \
+        --json number,title,state,url -- "$KEYWORDS" 2> /dev/null \
+        | jq -r --argjson self "$ISSUE_NUMBER" \
+            '.[] | select(.number != $self) | "- #\(.number) [\(.state)] \(.title)"' \
+        || echo "(search unavailable)"
 } >> "$CTX"
 
 echo "context bundle: $(wc -c < "$CTX") bytes, addon=${ADDON:-none}"

.github/stargazer_countries.csv

@@ -418,6 +418,7 @@ KuchenKavalier,,2026-08-10
 KuerbisK,,2026-08-10
 Kvasenok,,2026-08-10
 KyleGolfer,,2026-08-10
+L00PERY,,2026-09-06
 L0rdShrek,Germany,
 L1nKinc,Germany,
 LaLaBer,,2026-08-10
@@ -444,6 +445,7 @@ LoginByCall,,2026-08-10
 Lolekpolek,,2026-08-10
 LonelySoul7X,,2026-08-10
 Loong-He,China,2026-08-30
+Loong-OvO,China,2026-09-06
 Lorsel,Italy,
 Luca2165801154,,2026-08-10
 Lucius-Waverly,,2026-08-16
@@ -1390,6 +1392,7 @@ flostingapplesauce,,2026-08-10
 flozi00,Germany,
 flue17,,2026-08-10
 fmcglinn,Australia,
+foodstampou812,United States,2026-09-06
 forming,,2026-08-10
 forreggbor,Hungary,
 foundbobby,United States,
@@ -1834,6 +1837,7 @@ m1kethai,Canada,
 m23l,,2026-08-10
 m2sh,"Iran, Islamic Republic of",
 m4rcSA,,2026-08-10
+m4rkolson,United States,2026-09-06
 mProwler,United States,
 mStrangers,,2026-08-10
 mabt,,2026-08-10
@@ -2085,6 +2089,7 @@ p0wertiger,Poland,
 paalwilliams,Germany,
 pace6666,,2026-08-10
 pafnow,France,
+pahanitsch,Germany,2026-09-06
 pandabreads,,2026-08-10
 pankaj151,India,
 papafrank66,,2026-08-10
@@ -2664,6 +2669,7 @@ yycsdm,,2026-08-10
 yyll2233,,2026-08-10
 z2833,,2026-08-10
 z307917424,,2026-08-10
+zacharee,Panama,2026-09-06
 zachgilliam,United States,
 zanyraspi,,2026-08-10
 zdaar,,2026-08-10

.templates/00-banner.sh

@@ -6,7 +6,7 @@ set -e
 # Banner
 # ======================================================================
 
-if ! bashio::supervisor.ping 2>/dev/null; then
+if ! bashio::supervisor.ping 2> /dev/null; then
     # Source standalone bashio first to provide function definitions
     if [ -f /usr/local/lib/bashio-standalone.sh ]; then
         source /usr/local/lib/bashio-standalone.sh
@@ -19,11 +19,11 @@ if ! bashio::supervisor.ping 2>/dev/null; then
     if [ ! -f /usr/bin/bashio ]; then
         cp -rf /usr/local/lib/bashio-standalone.sh /usr/bin/bashio
     fi
-    grep -rl "^#!.*bashio" /etc |
-    while IFS= read -r f; do
-        grep -qF "source /usr/local/lib/bashio-standalone.sh" "$f" && continue
-        sed -i '1a source /usr/local/lib/bashio-standalone.sh' "$f"
-    done
+    grep -rl "^#!.*bashio" /etc \
+        | while IFS= read -r f; do
+            grep -qF "source /usr/local/lib/bashio-standalone.sh" "$f" && continue
+            sed -i '1a source /usr/local/lib/bashio-standalone.sh' "$f"
+        done
 else
     bashio::log.blue '-----------------------------------------------------------'
     bashio::log.blue " Add-on: $(bashio::addon.name)"
@@ -49,7 +49,7 @@ bashio::log.green ' Provided by: https://github.com/alexbelgium/hassio-addons '
 bashio::log.blue '-----------------------------------------------------------'
 
 # Adapt user abc
-if command -v id &>/dev/null && id abc &>/dev/null; then
+if command -v id &> /dev/null && id abc &> /dev/null; then
     if bashio::config.has_value "PUID" && bashio::config.has_value "PGID"; then
         PUID="$(bashio::config "PUID")"
         PGID="$(bashio::config "PGID")"

.templates/00-global_var.sh

@@ -152,15 +152,15 @@ if [[ "${1:-}" == "--self-test" ]]; then
         done
     fi
 
-    [[ "$self_test_rc" -eq 0 ]] &&
-        echo "${#self_test_values[@]} values round-tripped unchanged (export block + dotenv)"
+    [[ "$self_test_rc" -eq 0 ]] \
+        && echo "${#self_test_values[@]} values round-tripped unchanged (export block + dotenv)"
     exit "$self_test_rc"
 fi
 
 ################################################################################
 # Guard: only run inside Supervisor-managed add-ons
 ################################################################################
-if ! bashio::supervisor.ping 2>/dev/null; then
+if ! bashio::supervisor.ping 2> /dev/null; then
     echo "..."
     exit 0
 fi
@@ -179,7 +179,7 @@ ENV_FILE="/.env"
 ETC_ENV_FILE="/etc/environment"
 
 [[ -f "$JSONSOURCE" ]] || bashio::exit.nok "Missing $JSONSOURCE"
-command -v jq >/dev/null || bashio::exit.nok "jq is required"
+command -v jq > /dev/null || bashio::exit.nok "jq is required"
 
 mkdir -p /etc
 touch "$ETC_ENV_FILE"
@@ -193,7 +193,10 @@ SECRETSOURCE=""
 
 resolve_secret() {
     local v="$1" name line
-    [[ "$v" =~ ^[[:space:]]*\!secret[[:space:]]+(.+)$ ]] || { printf '%s' "$v"; return; }
+    [[ "$v" =~ ^[[:space:]]*\!secret[[:space:]]+(.+)$ ]] || {
+        printf '%s' "$v"
+        return
+    }
     name="${BASH_REMATCH[1]}"
     [[ -n "$SECRETSOURCE" ]] || bashio::exit.nok "Secrets not mounted"
 

.templates/00-smb_mounts.sh

@@ -4,9 +4,9 @@
 
 set -e
 
-if ! bashio::supervisor.ping 2>/dev/null; then
-  bashio::log.blue "Disabled : please use another method"
-  exit 0
+if ! bashio::supervisor.ping 2> /dev/null; then
+    bashio::log.blue "Disabled : please use another method"
+    exit 0
 fi
 
 bashio::log.notice "This script is used to mount remote smb/cifs/nfs shares. Instructions here : https://github.com/alexbelgium/hassio-addons/wiki/Mounting-remote-shares-in-Addons"
@@ -16,167 +16,167 @@ bashio::log.notice "This script is used to mount remote smb/cifs/nfs shares. Ins
 ####################
 
 cleanup_cred() {
-  if [[ -n "${CRED_FILE:-}" && -f "${CRED_FILE:-}" ]]; then
-    rm -f "$CRED_FILE" || true
-  fi
-  CRED_FILE=""
+    if [[ -n "${CRED_FILE:-}" && -f "${CRED_FILE:-}" ]]; then
+        rm -f "$CRED_FILE" || true
+    fi
+    CRED_FILE=""
 }
 
 test_mount() {
-  MOUNTED=false
-  ERROR_MOUNT=false
-  mountpoint="/mnt/$diskname"
-
-  if ! mountpoint -q "$mountpoint"; then
-    return 0
-  fi
-
-  _test_write() {
-    local testfile="$mountpoint/.writetest_$$"
-    if : >"$testfile" 2>/dev/null; then
-      rm -f "$testfile" 2>/dev/null || true
-      return 0
-    else
-      rm -f "$testfile" 2>/dev/null || true
-      return 1
-    fi
-  }
-
-  if _test_write 2>/dev/null; then
-    MOUNTED=true
-    return 0
-  fi
-
-  local orig_mountoptions="$MOUNTOPTIONS"
-
-  if [[ "$FSTYPE" == "cifs" && "$orig_mountoptions" != *"noserverino"* ]]; then
-    echo "... retrying mount with noserverino"
-    MOUNTOPTIONS="${orig_mountoptions},noserverino"
-
-    umount "$mountpoint" 2>/dev/null || true
-    if mount_drive "$MOUNTOPTIONS"; then
-      if _test_write 2>/dev/null; then
-        MOUNTED=true
-        return 0
-      fi
-    fi
-  fi
-
-  if [[ "$FSTYPE" == "cifs" && "$orig_mountoptions" != *"noperm"* ]]; then
-    echo "... retrying mount with noperm"
-    MOUNTOPTIONS="${orig_mountoptions},noperm"
-
-    umount "$mountpoint" 2>/dev/null || true
-    if mount_drive "$MOUNTOPTIONS"; then
-      if _test_write 2>/dev/null; then
-        MOUNTED=true
-        return 0
-      fi
-    fi
-  fi
-
-  if mountpoint -q "$mountpoint"; then
-    MOUNTED="readonly"
-  else
     MOUNTED=false
-  fi
-  return 0
+    ERROR_MOUNT=false
+    mountpoint="/mnt/$diskname"
+
+    if ! mountpoint -q "$mountpoint"; then
+        return 0
+    fi
+
+    _test_write() {
+        local testfile="$mountpoint/.writetest_$$"
+        if : > "$testfile" 2> /dev/null; then
+            rm -f "$testfile" 2> /dev/null || true
+            return 0
+        else
+            rm -f "$testfile" 2> /dev/null || true
+            return 1
+        fi
+    }
+
+    if _test_write 2> /dev/null; then
+        MOUNTED=true
+        return 0
+    fi
+
+    local orig_mountoptions="$MOUNTOPTIONS"
+
+    if [[ "$FSTYPE" == "cifs" && "$orig_mountoptions" != *"noserverino"* ]]; then
+        echo "... retrying mount with noserverino"
+        MOUNTOPTIONS="${orig_mountoptions},noserverino"
+
+        umount "$mountpoint" 2> /dev/null || true
+        if mount_drive "$MOUNTOPTIONS"; then
+            if _test_write 2> /dev/null; then
+                MOUNTED=true
+                return 0
+            fi
+        fi
+    fi
+
+    if [[ "$FSTYPE" == "cifs" && "$orig_mountoptions" != *"noperm"* ]]; then
+        echo "... retrying mount with noperm"
+        MOUNTOPTIONS="${orig_mountoptions},noperm"
+
+        umount "$mountpoint" 2> /dev/null || true
+        if mount_drive "$MOUNTOPTIONS"; then
+            if _test_write 2> /dev/null; then
+                MOUNTED=true
+                return 0
+            fi
+        fi
+    fi
+
+    if mountpoint -q "$mountpoint"; then
+        MOUNTED="readonly"
+    else
+        MOUNTED=false
+    fi
+    return 0
 }
 
 mount_drive() {
-  MOUNTED=true
-  MOUNTOPTIONS="$1"
+    MOUNTED=true
+    MOUNTOPTIONS="$1"
 
-  if [[ "$FSTYPE" == "cifs" ]]; then
-    mount -t cifs -o "$MOUNTOPTIONS" "$disk" "/mnt/$diskname" 2>"$ERRORCODE_FILE" || MOUNTED=false
-  elif [[ "$FSTYPE" == "nfs" ]]; then
-    mount -t nfs -o "$MOUNTOPTIONS" "$disk" "/mnt/$diskname" 2>"$ERRORCODE_FILE" || MOUNTED=false
-  fi
+    if [[ "$FSTYPE" == "cifs" ]]; then
+        mount -t cifs -o "$MOUNTOPTIONS" "$disk" "/mnt/$diskname" 2> "$ERRORCODE_FILE" || MOUNTED=false
+    elif [[ "$FSTYPE" == "nfs" ]]; then
+        mount -t nfs -o "$MOUNTOPTIONS" "$disk" "/mnt/$diskname" 2> "$ERRORCODE_FILE" || MOUNTED=false
+    fi
 
-  if [[ "$MOUNTED" == "true" ]]; then
-    test_mount
-  fi
+    if [[ "$MOUNTED" == "true" ]]; then
+        test_mount
+    fi
 }
 
 # Retry ladder: SMB3 -> SMB2 when mount fails due to dialect/negotiation issues
 retry_cifs_with_vers_ladder_on_dialect_failure() {
-  [[ "${FSTYPE:-}" == "cifs" ]] || return 0
-  [[ "${MOUNTED:-false}" == "false" ]] || return 0
-  [[ "${CIFS_LADDER_ATTEMPTED:-false}" == "false" ]] || return 0
+    [[ "${FSTYPE:-}" == "cifs" ]] || return 0
+    [[ "${MOUNTED:-false}" == "false" ]] || return 0
+    [[ "${CIFS_LADDER_ATTEMPTED:-false}" == "false" ]] || return 0
 
-  local err mountpoint
-  mountpoint="/mnt/$diskname"
-  err="$(cat "$ERRORCODE_FILE" 2>/dev/null || true)"
+    local err mountpoint
+    mountpoint="/mnt/$diskname"
+    err="$(cat "$ERRORCODE_FILE" 2> /dev/null || true)"
 
-  if echo "$err" | grep -Eq 'mount error\(13\)|Permission denied|NT_STATUS_(LOGON_FAILURE|ACCESS_DENIED)|STATUS_(LOGON_FAILURE|ACCESS_DENIED)'; then
-    return 0
-  fi
+    if echo "$err" | grep -Eq 'mount error\(13\)|Permission denied|NT_STATUS_(LOGON_FAILURE|ACCESS_DENIED)|STATUS_(LOGON_FAILURE|ACCESS_DENIED)'; then
+        return 0
+    fi
 
-  if ! echo "$err" | grep -Eq 'mount error\(22\)|mount error\(95\)|mount error\(112\)|Server abruptly closed the connection|does not support the SMB version|Protocol negotiation|NT_STATUS_CONNECTION_DISCONNECTED'; then
-    return 0
-  fi
+    if ! echo "$err" | grep -Eq 'mount error\(22\)|mount error\(95\)|mount error\(112\)|Server abruptly closed the connection|does not support the SMB version|Protocol negotiation|NT_STATUS_CONNECTION_DISCONNECTED'; then
+        return 0
+    fi
 
-  CIFS_LADDER_ATTEMPTED=true
-  bashio::log.warning "...... CIFS negotiation/dialect failure: trying SMB dialect ladder (3.x -> 2.x -> 1.0)."
+    CIFS_LADDER_ATTEMPTED=true
+    bashio::log.warning "...... CIFS negotiation/dialect failure: trying SMB dialect ladder (3.x -> 2.x -> 1.0)."
 
-  local base_opts try_opts vers vopt sectry
+    local base_opts try_opts vers vopt sectry
 
-  base_opts="$MOUNTOPTIONS"
-  base_opts="$(echo "$base_opts" | sed -E 's/,vers=[^,]+//g; s/,sec=[^,]+//g')"
-
-  local -a opt_variants=("" ",nounix" ",noserverino" ",nounix,noserverino")
-  local -a sec_variants=("" ",sec=ntlmssp" ",sec=ntlmv2" ",sec=ntlm")
-  local -a vers_variants=("3.1.1" "3.02" "3.0" "2.1" "2.0" "1.0")
-
-  for vopt in "${opt_variants[@]}"; do
-    for vers in "${vers_variants[@]}"; do
-      for sectry in "${sec_variants[@]}"; do
-        [[ "$MOUNTED" == "false" ]] || break
-        umount "$mountpoint" 2>/dev/null || true
-        try_opts="${base_opts}${vopt},vers=${vers}${sectry}"
-        mount_drive "$try_opts"
-      done
-      [[ "$MOUNTED" == "false" ]] || break
-    done
-    [[ "$MOUNTED" == "false" ]] || break
-  done
-
-  if [[ "$MOUNTED" == "false" ]]; then
-    bashio::log.warning "...... still failing after vers ladder; retrying with reduced CIFS options."
     base_opts="$MOUNTOPTIONS"
     base_opts="$(echo "$base_opts" | sed -E 's/,vers=[^,]+//g; s/,sec=[^,]+//g')"
-    base_opts="${base_opts//,mfsymlinks/}"
-    base_opts="${base_opts//,nobrl/}"
-    base_opts="$(echo "$base_opts" | sed -E 's/,iocharset=[^,]+//g')"
 
-    local -a vers_variants2=("2.1" "2.0" "1.0")
+    local -a opt_variants=("" ",nounix" ",noserverino" ",nounix,noserverino")
+    local -a sec_variants=("" ",sec=ntlmssp" ",sec=ntlmv2" ",sec=ntlm")
+    local -a vers_variants=("3.1.1" "3.02" "3.0" "2.1" "2.0" "1.0")
+
     for vopt in "${opt_variants[@]}"; do
-      for vers in "${vers_variants2[@]}"; do
-        for sectry in "${sec_variants[@]}"; do
-          [[ "$MOUNTED" == "false" ]] || break
-          umount "$mountpoint" 2>/dev/null || true
-          try_opts="${base_opts}${vopt},vers=${vers}${sectry}"
-          mount_drive "$try_opts"
+        for vers in "${vers_variants[@]}"; do
+            for sectry in "${sec_variants[@]}"; do
+                [[ "$MOUNTED" == "false" ]] || break
+                umount "$mountpoint" 2> /dev/null || true
+                try_opts="${base_opts}${vopt},vers=${vers}${sectry}"
+                mount_drive "$try_opts"
+            done
+            [[ "$MOUNTED" == "false" ]] || break
         done
         [[ "$MOUNTED" == "false" ]] || break
-      done
-      [[ "$MOUNTED" == "false" ]] || break
     done
 
     if [[ "$MOUNTED" == "false" ]]; then
-      for vopt in "${opt_variants[@]}"; do
-        for vers in "${vers_variants2[@]}"; do
-          [[ "$MOUNTED" == "false" ]] || break
-          umount "$mountpoint" 2>/dev/null || true
-          try_opts="${base_opts}${vopt},vers=${vers},sec=ntlmssp"
-          mount_drive "$try_opts"
-        done
-        [[ "$MOUNTED" == "false" ]] || break
-      done
-    fi
-  fi
+        bashio::log.warning "...... still failing after vers ladder; retrying with reduced CIFS options."
+        base_opts="$MOUNTOPTIONS"
+        base_opts="$(echo "$base_opts" | sed -E 's/,vers=[^,]+//g; s/,sec=[^,]+//g')"
+        base_opts="${base_opts//,mfsymlinks/}"
+        base_opts="${base_opts//,nobrl/}"
+        base_opts="$(echo "$base_opts" | sed -E 's/,iocharset=[^,]+//g')"
 
-  return 0
+        local -a vers_variants2=("2.1" "2.0" "1.0")
+        for vopt in "${opt_variants[@]}"; do
+            for vers in "${vers_variants2[@]}"; do
+                for sectry in "${sec_variants[@]}"; do
+                    [[ "$MOUNTED" == "false" ]] || break
+                    umount "$mountpoint" 2> /dev/null || true
+                    try_opts="${base_opts}${vopt},vers=${vers}${sectry}"
+                    mount_drive "$try_opts"
+                done
+                [[ "$MOUNTED" == "false" ]] || break
+            done
+            [[ "$MOUNTED" == "false" ]] || break
+        done
+
+        if [[ "$MOUNTED" == "false" ]]; then
+            for vopt in "${opt_variants[@]}"; do
+                for vers in "${vers_variants2[@]}"; do
+                    [[ "$MOUNTED" == "false" ]] || break
+                    umount "$mountpoint" 2> /dev/null || true
+                    try_opts="${base_opts}${vopt},vers=${vers},sec=ntlmssp"
+                    mount_drive "$try_opts"
+                done
+                [[ "$MOUNTED" == "false" ]] || break
+            done
+        fi
+    fi
+
+    return 0
 }
 
 ########################
@@ -185,289 +185,289 @@ retry_cifs_with_vers_ladder_on_dialect_failure() {
 
 if bashio::config.has_value 'networkdisks'; then
 
-  echo "Mounting network share(s)..."
+    echo "Mounting network share(s)..."
 
-  MOREDISKS="$(bashio::config 'networkdisks')"
-  USERNAME="$(bashio::config 'cifsusername')"
-  PASSWORD="$(bashio::config 'cifspassword')"
+    MOREDISKS="$(bashio::config 'networkdisks')"
+    USERNAME="$(bashio::config 'cifsusername')"
+    PASSWORD="$(bashio::config 'cifspassword')"
 
-  SMBVERS=""
-  SECVERS=""
-  CHARSET=",iocharset=utf8"
-
-  MOREDISKS="${MOREDISKS//$'\r'/}"
-  MOREDISKS="${MOREDISKS//$'\n'/,}"
-  MOREDISKS="$(echo "$MOREDISKS" | sed -E 's/[[:space:]]*,[[:space:]]*/,/g; s/^[[:space:]]+//; s/[[:space:]]+$//')"
-
-  DOMAINCLIENT=""
-  CIFSDOMAIN=""
-  if bashio::config.has_value 'cifsdomain'; then
-    CIFSDOMAIN="$(bashio::config 'cifsdomain')"
-    echo "... using domain $CIFSDOMAIN"
-    DOMAINCLIENT="--workgroup=$CIFSDOMAIN"
-  fi
-
-  PUID=",uid=$(id -u)"
-  PGID=",gid=$(id -g)"
-  if bashio::config.has_value 'PUID' && bashio::config.has_value 'PGID'; then
-    echo "... using PUID $(bashio::config 'PUID') and PGID $(bashio::config 'PGID')"
-    PUID=",uid=$(bashio::config 'PUID')"
-    PGID=",gid=$(bashio::config 'PGID')"
-  fi
-
-  IFS=',' read -r -a DISK_LIST <<< "$MOREDISKS"
-
-  for disk in "${DISK_LIST[@]}"; do
-    CRED_FILE=""
-    cleanup_cred
-
-    disk="${disk//$'\r'/}"
-    disk="$(echo "$disk" | sed -E 's/^[[:space:]]+//; s/[[:space:]]+$//')"
-    [[ -z "$disk" ]] && continue
-
-    disk="$(echo "$disk" | sed 's,/$,,')"
-    disk="${disk//"\040"/ }"
-
-    FSTYPE="cifs"
-    if [[ "$disk" =~ ^nfs:// ]]; then
-      FSTYPE="nfs"
-      disk="${disk#nfs://}"
-    elif [[ "$disk" =~ ^[^/:]+:/.+ ]]; then
-      FSTYPE="nfs"
-    fi
-
-    if [[ "$FSTYPE" == "cifs" ]]; then
-      server="$(echo "$disk" | grep -E -o "[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+" | head -n 1)"
-    else
-      server="${disk%%:*}"
-    fi
-
-    diskname="$disk"
-    diskname="${diskname//\\//}"
-    diskname="${diskname##*/}"
-
-    if mountpoint -q "/mnt/$diskname" 2>/dev/null; then
-      bashio::log.warning "...... mount point /mnt/$diskname already in use (name collision for $disk). Skipping this share."
-      continue
-    fi
-
-    ERRORCODE_FILE="/tmp/mount_error_${diskname//[^a-zA-Z0-9._-]/_}.log"
-    : >"$ERRORCODE_FILE" || true
-
-    MOUNTED=false
-    CIFS_LADDER_ATTEMPTED=false
-    SMBVERS_FORCE=""
-    SECVERS_FORCE=""
     SMBVERS=""
     SECVERS=""
+    CHARSET=",iocharset=utf8"
 
-    echo "... mounting ($FSTYPE) $disk"
+    MOREDISKS="${MOREDISKS//$'\r'/}"
+    MOREDISKS="${MOREDISKS//$'\n'/,}"
+    MOREDISKS="$(echo "$MOREDISKS" | sed -E 's/[[:space:]]*,[[:space:]]*/,/g; s/^[[:space:]]+//; s/[[:space:]]+$//')"
 
-    if [[ "$FSTYPE" == "cifs" ]]; then
-      if [[ ! "$disk" =~ ^//[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+/.+ ]]; then
-        bashio::log.fatal "...... invalid CIFS path \"$disk\". Use //123.12.12.12/sharedfolder,//123.12.12.12/sharedfolder2"
-        echo "Invalid CIFS path structure: $disk" >"$ERRORCODE_FILE" || true
-        continue
-      fi
-    else
-      if [[ ! "$disk" =~ ^[^/:]+:/.+ ]]; then
-        bashio::log.fatal "...... invalid NFS path \"$disk\". Use server:/export/path or 123.12.12.12:/export/path"
-        echo "Invalid NFS path structure: $disk" >"$ERRORCODE_FILE" || true
-        continue
-      fi
+    DOMAINCLIENT=""
+    CIFSDOMAIN=""
+    if bashio::config.has_value 'cifsdomain'; then
+        CIFSDOMAIN="$(bashio::config 'cifsdomain')"
+        echo "... using domain $CIFSDOMAIN"
+        DOMAINCLIENT="--workgroup=$CIFSDOMAIN"
     fi
 
-    mkdir -p "/mnt/$diskname"
-    chown root:root "/mnt/$diskname"
+    PUID=",uid=$(id -u)"
+    PGID=",gid=$(id -g)"
+    if bashio::config.has_value 'PUID' && bashio::config.has_value 'PGID'; then
+        echo "... using PUID $(bashio::config 'PUID') and PGID $(bashio::config 'PGID')"
+        PUID=",uid=$(bashio::config 'PUID')"
+        PGID=",gid=$(bashio::config 'PGID')"
+    fi
 
-    if [[ "$FSTYPE" == "cifs" ]]; then
-      CRED_FILE="$(mktemp /tmp/cifs-cred.XXXXXX)"
-      chmod 600 "$CRED_FILE"
-      {
-        printf 'username=%s\n' "$USERNAME"
-        printf 'password=%s\n' "$PASSWORD"
-        if [[ -n "${CIFSDOMAIN:-}" ]]; then
-          printf 'domain=%s\n' "$CIFSDOMAIN"
+    IFS=',' read -r -a DISK_LIST <<< "$MOREDISKS"
+
+    for disk in "${DISK_LIST[@]}"; do
+        CRED_FILE=""
+        cleanup_cred
+
+        disk="${disk//$'\r'/}"
+        disk="$(echo "$disk" | sed -E 's/^[[:space:]]+//; s/[[:space:]]+$//')"
+        [[ -z "$disk" ]] && continue
+
+        disk="$(echo "$disk" | sed 's,/$,,')"
+        disk="${disk//"\040"/ }"
+
+        FSTYPE="cifs"
+        if [[ "$disk" =~ ^nfs:// ]]; then
+            FSTYPE="nfs"
+            disk="${disk#nfs://}"
+        elif [[ "$disk" =~ ^[^/:]+:/.+ ]]; then
+            FSTYPE="nfs"
         fi
-      } >"$CRED_FILE"
-    fi
 
-    if [[ "$FSTYPE" == "cifs" ]]; then
-      mount_drive "rw,file_mode=0775,dir_mode=0775,credentials=${CRED_FILE},nobrl,mfsymlinks${SMBVERS}${SECVERS}${PUID}${PGID}${CHARSET}"
-      if [[ "$MOUNTED" == "false" ]]; then
-        retry_cifs_with_vers_ladder_on_dialect_failure
-      fi
-    else
-      mount_drive "rw,nfsvers=4.2,proto=tcp,hard,timeo=600,retrans=2"
-    fi
+        if [[ "$FSTYPE" == "cifs" ]]; then
+            server="$(echo "$disk" | grep -E -o "[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+" | head -n 1)"
+        else
+            server="${disk%%:*}"
+        fi
 
-    if [[ "$MOUNTED" == "false" ]]; then
-      if [[ "$FSTYPE" == "cifs" ]]; then
-        if command -v nmap >/dev/null 2>&1; then
-          output="$(nmap -F "$server" -T5 -oG - 2>/dev/null || true)"
-          if ! echo "$output" | grep -q "445/open"; then
-            if echo "$output" | grep -q "/open"; then
-              bashio::log.fatal "...... $server is reachable but SMB port not opened, stopping script"
-            else
-              bashio::log.fatal "...... fatal : $server not reachable, is it correct"
-            fi
-            cleanup_cred
-            rm -f "$ERRORCODE_FILE" 2>/dev/null || true
+        diskname="$disk"
+        diskname="${diskname//\\//}"
+        diskname="${diskname##*/}"
+
+        if mountpoint -q "/mnt/$diskname" 2> /dev/null; then
+            bashio::log.warning "...... mount point /mnt/$diskname already in use (name collision for $disk). Skipping this share."
             continue
-          fi
-          echo "...... $server is confirmed reachable"
-        else
-          bashio::log.warning "...... nmap not available; skipping SMB port reachability test"
         fi
 
-        if command -v smbclient >/dev/null 2>&1; then
-          OUTPUT="$(smbclient -t 2 -L "$server" -U "$USERNAME%$PASSWORD" -c "exit" $DOMAINCLIENT 2>&1 || true)"
-
-          if echo "$OUTPUT" | grep -q "LOGON_FAILURE"; then
-            bashio::log.fatal "...... incorrect Username, Password, or Domain! Script will stop."
-            cleanup_cred
-            rm -f "$ERRORCODE_FILE" 2>/dev/null || true
-            bashio::addon.stop
-          elif echo "$OUTPUT" | grep -q "tree connect failed" || echo "$OUTPUT" | grep -q "NT_STATUS_CONNECTION_DISCONNECTED"; then
-            echo "... using SMBv1"
-            bashio::log.warning "...... share reachable only with legacy SMBv1 (NT1) negotiation. Forcing SMBv1 options."
-            SMBVERS_FORCE=",vers=1.0"
-            SECVERS_FORCE=",sec=ntlm"
-          elif ! echo "$OUTPUT" | grep -q "Disk"; then
-            bashio::log.fatal "...... no shares found. Invalid or inaccessible SMB path?"
-          else
-            echo "...... credentials are valid"
-          fi
-        else
-          bashio::log.warning "...... smbclient not available; skipping SMB credential test"
-        fi
-
-        SMBRAW=""
-        SMB1_DETECTED=false
-        if command -v nmap >/dev/null 2>&1; then
-          NMAP_OUTPUT="$(nmap --script smb-protocols -p 445 "$server" 2>/dev/null || true)"
-          SMBRAW="$(
-            echo "$NMAP_OUTPUT" \
-              | awk '/SMB2_DIALECT_/ {print $NF}' \
-              | sed 's/SMB2_DIALECT_//' \
-              | tr -d '_' \
-              | sort -V | tail -n 1 || true
-          )"
-          if [[ -z "$SMBRAW" ]] && echo "$NMAP_OUTPUT" | grep -Eiq 'NT LM 0\.12|SMBv1|NT1'; then
-            SMB1_DETECTED=true
-          fi
-        fi
+        ERRORCODE_FILE="/tmp/mount_error_${diskname//[^a-zA-Z0-9._-]/_}.log"
+        : > "$ERRORCODE_FILE" || true
 
+        MOUNTED=false
+        CIFS_LADDER_ATTEMPTED=false
+        SMBVERS_FORCE=""
+        SECVERS_FORCE=""
         SMBVERS=""
-        case "$SMBRAW" in
-          311) SMBVERS=",vers=3.1.1" ;;
-          302) SMBVERS=",vers=3.02" ;;
-          300) SMBVERS=",vers=3.0" ;;
-          210) SMBVERS=",vers=2.1" ;;
-          202|200) SMBVERS=",vers=2.0" ;;
-          *) SMBVERS="" ;;
-        esac
+        SECVERS=""
 
-        if [[ -z "$SMBVERS" && "$SMB1_DETECTED" == "true" ]]; then
-          echo "...... SMB version detected via nmap : SMBv1 (NT LM 0.12)"
-          SMBVERS=",vers=1.0"
-          SECVERS=",sec=ntlm"
-        fi
+        echo "... mounting ($FSTYPE) $disk"
 
-        if [[ -n "$SMBVERS" ]]; then
-          echo "...... SMB version detected : ${SMBVERS#,vers=}"
-        elif command -v smbclient >/dev/null 2>&1 && smbclient -t 2 -L "$server" -m NT1 -U "$USERNAME%$PASSWORD" $DOMAINCLIENT -c "exit" &>/dev/null; then
-          echo "...... SMB version : only SMBv1 is supported, this can lead to issues"
-          SECVERS=",sec=ntlm"
-          SMBVERS=",vers=1.0"
+        if [[ "$FSTYPE" == "cifs" ]]; then
+            if [[ ! "$disk" =~ ^//[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+/.+ ]]; then
+                bashio::log.fatal "...... invalid CIFS path \"$disk\". Use //123.12.12.12/sharedfolder,//123.12.12.12/sharedfolder2"
+                echo "Invalid CIFS path structure: $disk" > "$ERRORCODE_FILE" || true
+                continue
+            fi
         else
-          echo "...... SMB version : couldn't detect, falling back to SMB3->SMB2->SMB1 ladder on negotiation/dialect failure"
-          SMBVERS=",vers=3.1.1"
+            if [[ ! "$disk" =~ ^[^/:]+:/.+ ]]; then
+                bashio::log.fatal "...... invalid NFS path \"$disk\". Use server:/export/path or 123.12.12.12:/export/path"
+                echo "Invalid NFS path structure: $disk" > "$ERRORCODE_FILE" || true
+                continue
+            fi
         fi
 
-        if [[ -n "$SMBVERS_FORCE" ]]; then
-          if [[ -n "$SMBVERS" && "$SMBVERS" != "$SMBVERS_FORCE" ]]; then
-            bashio::log.warning "...... overriding detected SMB version ${SMBVERS#,vers=} with forced ${SMBVERS_FORCE#,vers=} (server requires legacy protocol)"
-          fi
-          SMBVERS="$SMBVERS_FORCE"
-          [[ -z "$SECVERS" ]] && SECVERS="$SECVERS_FORCE"
+        mkdir -p "/mnt/$diskname"
+        chown root:root "/mnt/$diskname"
+
+        if [[ "$FSTYPE" == "cifs" ]]; then
+            CRED_FILE="$(mktemp /tmp/cifs-cred.XXXXXX)"
+            chmod 600 "$CRED_FILE"
+            {
+                printf 'username=%s\n' "$USERNAME"
+                printf 'password=%s\n' "$PASSWORD"
+                if [[ -n "${CIFSDOMAIN:-}" ]]; then
+                    printf 'domain=%s\n' "$CIFSDOMAIN"
+                fi
+            } > "$CRED_FILE"
         fi
 
-        SECVERS_BASE="$SECVERS"
-        for SECTRY in "$SECVERS_BASE" ",sec=ntlmv2" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=krb5i" ",sec=krb5" ",sec=ntlm" ",sec=ntlmv2i"; do
-          if [[ "$MOUNTED" == "false" ]]; then
-            mount_drive "rw,file_mode=0775,dir_mode=0775,credentials=${CRED_FILE},nobrl,mfsymlinks${SMBVERS}${SECTRY}${PUID}${PGID}${CHARSET}"
-          fi
-        done
+        if [[ "$FSTYPE" == "cifs" ]]; then
+            mount_drive "rw,file_mode=0775,dir_mode=0775,credentials=${CRED_FILE},nobrl,mfsymlinks${SMBVERS}${SECVERS}${PUID}${PGID}${CHARSET}"
+            if [[ "$MOUNTED" == "false" ]]; then
+                retry_cifs_with_vers_ladder_on_dialect_failure
+            fi
+        else
+            mount_drive "rw,nfsvers=4.2,proto=tcp,hard,timeo=600,retrans=2"
+        fi
 
         if [[ "$MOUNTED" == "false" ]]; then
-          retry_cifs_with_vers_ladder_on_dialect_failure
+            if [[ "$FSTYPE" == "cifs" ]]; then
+                if command -v nmap > /dev/null 2>&1; then
+                    output="$(nmap -F "$server" -T5 -oG - 2> /dev/null || true)"
+                    if ! echo "$output" | grep -q "445/open"; then
+                        if echo "$output" | grep -q "/open"; then
+                            bashio::log.fatal "...... $server is reachable but SMB port not opened, stopping script"
+                        else
+                            bashio::log.fatal "...... fatal : $server not reachable, is it correct"
+                        fi
+                        cleanup_cred
+                        rm -f "$ERRORCODE_FILE" 2> /dev/null || true
+                        continue
+                    fi
+                    echo "...... $server is confirmed reachable"
+                else
+                    bashio::log.warning "...... nmap not available; skipping SMB port reachability test"
+                fi
+
+                if command -v smbclient > /dev/null 2>&1; then
+                    OUTPUT="$(smbclient -t 2 -L "$server" -U "$USERNAME%$PASSWORD" -c "exit" $DOMAINCLIENT 2>&1 || true)"
+
+                    if echo "$OUTPUT" | grep -q "LOGON_FAILURE"; then
+                        bashio::log.fatal "...... incorrect Username, Password, or Domain! Script will stop."
+                        cleanup_cred
+                        rm -f "$ERRORCODE_FILE" 2> /dev/null || true
+                        bashio::addon.stop
+                    elif echo "$OUTPUT" | grep -q "tree connect failed" || echo "$OUTPUT" | grep -q "NT_STATUS_CONNECTION_DISCONNECTED"; then
+                        echo "... using SMBv1"
+                        bashio::log.warning "...... share reachable only with legacy SMBv1 (NT1) negotiation. Forcing SMBv1 options."
+                        SMBVERS_FORCE=",vers=1.0"
+                        SECVERS_FORCE=",sec=ntlm"
+                    elif ! echo "$OUTPUT" | grep -q "Disk"; then
+                        bashio::log.fatal "...... no shares found. Invalid or inaccessible SMB path?"
+                    else
+                        echo "...... credentials are valid"
+                    fi
+                else
+                    bashio::log.warning "...... smbclient not available; skipping SMB credential test"
+                fi
+
+                SMBRAW=""
+                SMB1_DETECTED=false
+                if command -v nmap > /dev/null 2>&1; then
+                    NMAP_OUTPUT="$(nmap --script smb-protocols -p 445 "$server" 2> /dev/null || true)"
+                    SMBRAW="$(
+                        echo "$NMAP_OUTPUT" \
+                            | awk '/SMB2_DIALECT_/ {print $NF}' \
+                            | sed 's/SMB2_DIALECT_//' \
+                            | tr -d '_' \
+                            | sort -V | tail -n 1 || true
+                    )"
+                    if [[ -z "$SMBRAW" ]] && echo "$NMAP_OUTPUT" | grep -Eiq 'NT LM 0\.12|SMBv1|NT1'; then
+                        SMB1_DETECTED=true
+                    fi
+                fi
+
+                SMBVERS=""
+                case "$SMBRAW" in
+                    311) SMBVERS=",vers=3.1.1" ;;
+                    302) SMBVERS=",vers=3.02" ;;
+                    300) SMBVERS=",vers=3.0" ;;
+                    210) SMBVERS=",vers=2.1" ;;
+                    202 | 200) SMBVERS=",vers=2.0" ;;
+                    *) SMBVERS="" ;;
+                esac
+
+                if [[ -z "$SMBVERS" && "$SMB1_DETECTED" == "true" ]]; then
+                    echo "...... SMB version detected via nmap : SMBv1 (NT LM 0.12)"
+                    SMBVERS=",vers=1.0"
+                    SECVERS=",sec=ntlm"
+                fi
+
+                if [[ -n "$SMBVERS" ]]; then
+                    echo "...... SMB version detected : ${SMBVERS#,vers=}"
+                elif command -v smbclient > /dev/null 2>&1 && smbclient -t 2 -L "$server" -m NT1 -U "$USERNAME%$PASSWORD" $DOMAINCLIENT -c "exit" &> /dev/null; then
+                    echo "...... SMB version : only SMBv1 is supported, this can lead to issues"
+                    SECVERS=",sec=ntlm"
+                    SMBVERS=",vers=1.0"
+                else
+                    echo "...... SMB version : couldn't detect, falling back to SMB3->SMB2->SMB1 ladder on negotiation/dialect failure"
+                    SMBVERS=",vers=3.1.1"
+                fi
+
+                if [[ -n "$SMBVERS_FORCE" ]]; then
+                    if [[ -n "$SMBVERS" && "$SMBVERS" != "$SMBVERS_FORCE" ]]; then
+                        bashio::log.warning "...... overriding detected SMB version ${SMBVERS#,vers=} with forced ${SMBVERS_FORCE#,vers=} (server requires legacy protocol)"
+                    fi
+                    SMBVERS="$SMBVERS_FORCE"
+                    [[ -z "$SECVERS" ]] && SECVERS="$SECVERS_FORCE"
+                fi
+
+                SECVERS_BASE="$SECVERS"
+                for SECTRY in "$SECVERS_BASE" ",sec=ntlmv2" ",sec=ntlmssp" ",sec=ntlmsspi" ",sec=krb5i" ",sec=krb5" ",sec=ntlm" ",sec=ntlmv2i"; do
+                    if [[ "$MOUNTED" == "false" ]]; then
+                        mount_drive "rw,file_mode=0775,dir_mode=0775,credentials=${CRED_FILE},nobrl,mfsymlinks${SMBVERS}${SECTRY}${PUID}${PGID}${CHARSET}"
+                    fi
+                done
+
+                if [[ "$MOUNTED" == "false" ]]; then
+                    retry_cifs_with_vers_ladder_on_dialect_failure
+                fi
+
+            else
+                if command -v nmap > /dev/null 2>&1; then
+                    output="$(nmap -F "$server" -T5 -oG - 2> /dev/null || true)"
+                    if ! echo "$output" | grep -Eq '(2049|111)/open'; then
+                        bashio::log.fatal "...... $server is reachable but NFS ports not open"
+                    fi
+                else
+                    bashio::log.warning "...... nmap not available; skipping NFS port reachability test"
+                fi
+
+                for NFVER in 4.2 4.1 4 3; do
+                    if [[ "$MOUNTED" == "false" ]]; then
+                        mount_drive "rw,nfsvers=${NFVER},proto=tcp"
+                    fi
+                done
+            fi
         fi
 
-      else
-        if command -v nmap >/dev/null 2>&1; then
-          output="$(nmap -F "$server" -T5 -oG - 2>/dev/null || true)"
-          if ! echo "$output" | grep -Eq '(2049|111)/open'; then
-            bashio::log.fatal "...... $server is reachable but NFS ports not open"
-          fi
+        if [[ "$MOUNTED" == "true" ]]; then
+            bashio::log.info "...... $disk successfully mounted to /mnt/$diskname with options ${MOUNTOPTIONS/$PASSWORD/XXXXXXXXXX}"
+            rm -f "$ERRORCODE_FILE" 2> /dev/null || true
+
+            if [[ "$FSTYPE" == "cifs" && "$MOUNTOPTIONS" == *"vers=1.0"* ]]; then
+                bashio::log.warning ""
+                bashio::log.warning "Your SMB system requires SMBv1. This is an obsolete protocol. Please correct this to prevent issues."
+                bashio::log.warning ""
+            fi
+
+            cleanup_cred
+
+        elif [[ "$MOUNTED" == "readonly" ]]; then
+            bashio::log.warning "...... $disk mounted to /mnt/$diskname but is READ-ONLY or not writable by UID/GID ${PUID#,uid=}:${PGID#,gid=}."
+            bashio::log.warning "...... Check Samba share permissions, or try setting PUID/PGID to 0/0 (root), or adjust server ACLs."
+            rm -f "$ERRORCODE_FILE" 2> /dev/null || true
+            cleanup_cred
+
         else
-          bashio::log.warning "...... nmap not available; skipping NFS port reachability test"
+            if [[ "$FSTYPE" == "cifs" ]]; then
+                bashio::log.fatal "Error, unable to mount $disk to /mnt/$diskname with username $USERNAME. Please check share path, username/password/domain; try UID/GID 0."
+                bashio::log.fatal "Here is some debugging info :"
+                if command -v smbclient > /dev/null 2>&1; then
+                    smbclient -t 2 -L "$server" -U "$USERNAME%$PASSWORD" -c "exit" $DOMAINCLIENT || true
+                else
+                    bashio::log.warning "smbclient not available; cannot print SMB debugging info"
+                fi
+
+                mount_drive "rw,credentials=${CRED_FILE}${PUID}${PGID}"
+                if [[ "$MOUNTED" == "false" ]]; then
+                    retry_cifs_with_vers_ladder_on_dialect_failure
+                fi
+            else
+                bashio::log.fatal "Error, unable to mount NFS share $disk to /mnt/$diskname. Please check export path and allowlist for this client."
+                mount_drive "rw"
+            fi
+
+            ERR_READ="$(cat "$ERRORCODE_FILE" 2> /dev/null || true)"
+            bashio::log.fatal "Error read : ${ERR_READ:-unknown error}, addon will stop in 1 min"
+
+            umount "/mnt/$diskname" 2> /dev/null || true
+            rmdir "/mnt/$diskname" 2> /dev/null || true
+            cleanup_cred
+            rm -f "$ERRORCODE_FILE" 2> /dev/null || true
+
+            bashio::addon.stop
         fi
-
-        for NFVER in 4.2 4.1 4 3; do
-          if [[ "$MOUNTED" == "false" ]]; then
-            mount_drive "rw,nfsvers=${NFVER},proto=tcp"
-          fi
-        done
-      fi
-    fi
-
-    if [[ "$MOUNTED" == "true" ]]; then
-      bashio::log.info "...... $disk successfully mounted to /mnt/$diskname with options ${MOUNTOPTIONS/$PASSWORD/XXXXXXXXXX}"
-      rm -f "$ERRORCODE_FILE" 2>/dev/null || true
-
-      if [[ "$FSTYPE" == "cifs" && "$MOUNTOPTIONS" == *"vers=1.0"* ]]; then
-        bashio::log.warning ""
-        bashio::log.warning "Your SMB system requires SMBv1. This is an obsolete protocol. Please correct this to prevent issues."
-        bashio::log.warning ""
-      fi
-
-      cleanup_cred
-
-    elif [[ "$MOUNTED" == "readonly" ]]; then
-      bashio::log.warning "...... $disk mounted to /mnt/$diskname but is READ-ONLY or not writable by UID/GID ${PUID#,uid=}:${PGID#,gid=}."
-      bashio::log.warning "...... Check Samba share permissions, or try setting PUID/PGID to 0/0 (root), or adjust server ACLs."
-      rm -f "$ERRORCODE_FILE" 2>/dev/null || true
-      cleanup_cred
-
-    else
-      if [[ "$FSTYPE" == "cifs" ]]; then
-        bashio::log.fatal "Error, unable to mount $disk to /mnt/$diskname with username $USERNAME. Please check share path, username/password/domain; try UID/GID 0."
-        bashio::log.fatal "Here is some debugging info :"
-        if command -v smbclient >/dev/null 2>&1; then
-          smbclient -t 2 -L "$server" -U "$USERNAME%$PASSWORD" -c "exit" $DOMAINCLIENT || true
-        else
-          bashio::log.warning "smbclient not available; cannot print SMB debugging info"
-        fi
-
-        mount_drive "rw,credentials=${CRED_FILE}${PUID}${PGID}"
-        if [[ "$MOUNTED" == "false" ]]; then
-          retry_cifs_with_vers_ladder_on_dialect_failure
-        fi
-      else
-        bashio::log.fatal "Error, unable to mount NFS share $disk to /mnt/$diskname. Please check export path and allowlist for this client."
-        mount_drive "rw"
-      fi
-
-      ERR_READ="$(cat "$ERRORCODE_FILE" 2>/dev/null || true)"
-      bashio::log.fatal "Error read : ${ERR_READ:-unknown error}, addon will stop in 1 min"
-
-      umount "/mnt/$diskname" 2>/dev/null || true
-      rmdir "/mnt/$diskname" 2>/dev/null || true
-      cleanup_cred
-      rm -f "$ERRORCODE_FILE" 2>/dev/null || true
-
-      bashio::addon.stop
-    fi
-  done
+    done
 fi

.templates/01-config_yaml.sh

@@ -138,9 +138,9 @@ append_unique_line() {
     # $1=file, $2=line
     local _file="$1"
     local _line="$2"
-    mkdir -p "$(dirname "$_file")" 2>/dev/null || true
-    touch "$_file" 2>/dev/null || true
-    grep -qxF -- "$_line" "$_file" 2>/dev/null || echo "$_line" >> "$_file"
+    mkdir -p "$(dirname "$_file")" 2> /dev/null || true
+    touch "$_file" 2> /dev/null || true
+    grep -qxF -- "$_line" "$_file" 2> /dev/null || echo "$_line" >> "$_file"
 }
 
 while IFS= read -r line; do

.templates/01-custom_script.sh

@@ -7,27 +7,33 @@ set -e
 ##########################################
 
 pick_exec_dir() {
-  local d
-  for d in /dev/shm /run /var/run /mnt /root /; do
-    if [ -d "$d" ] && [ -w "$d" ]; then
-      local t="${d%/}/.exec_test_$$"
-      printf '#!/bin/sh\necho ok\n' >"$t" 2>/dev/null || { rm -f "$t" 2>/dev/null || true; continue; }
-      chmod 700 "$t" 2>/dev/null || { rm -f "$t" 2>/dev/null || true; continue; }
-      if "$t" >/dev/null 2>&1; then
-        rm -f "$t" 2>/dev/null || true
-        echo "$d"
-        return 0
-      fi
-      rm -f "$t" 2>/dev/null || true
-    fi
-  done
-  return 1
+    local d
+    for d in /dev/shm /run /var/run /mnt /root /; do
+        if [ -d "$d" ] && [ -w "$d" ]; then
+            local t="${d%/}/.exec_test_$$"
+            printf '#!/bin/sh\necho ok\n' > "$t" 2> /dev/null || {
+                rm -f "$t" 2> /dev/null || true
+                continue
+            }
+            chmod 700 "$t" 2> /dev/null || {
+                rm -f "$t" 2> /dev/null || true
+                continue
+            }
+            if "$t" > /dev/null 2>&1; then
+                rm -f "$t" 2> /dev/null || true
+                echo "$d"
+                return 0
+            fi
+            rm -f "$t" 2> /dev/null || true
+        fi
+    done
+    return 1
 }
 
 EXEC_DIR="$(pick_exec_dir || true)"
 if [ -z "${EXEC_DIR:-}" ]; then
-  echo "ERROR: Could not find an exec-capable writable directory."
-  exit 1
+    echo "ERROR: Could not find an exec-capable writable directory."
+    exit 1
 fi
 
 ######################
@@ -35,14 +41,14 @@ fi
 ######################
 
 candidate_shebangs=(
-  "/command/with-contenv bashio"
-  "/usr/bin/with-contenv bashio"
-  "/usr/bin/env bashio"
-  "/usr/bin/bashio"
-  "/usr/bin/bash"
-  "/bin/bash"
-  "/usr/bin/sh"
-  "/bin/sh"
+    "/command/with-contenv bashio"
+    "/usr/bin/with-contenv bashio"
+    "/usr/bin/env bashio"
+    "/usr/bin/bashio"
+    "/usr/bin/bash"
+    "/bin/bash"
+    "/usr/bin/sh"
+    "/bin/sh"
 )
 
 SHEBANG_ERRORS=()
@@ -85,76 +91,76 @@ echo "${_bv:-PROBE_OK}"
 '
 
 validate_shebang() {
-  local candidate="$1"
-  local tmp out rc
-  local errfile msg
+    local candidate="$1"
+    local tmp out rc
+    local errfile msg
 
-  # shellcheck disable=SC2206
-  local cmd=( $candidate )
-  local exe="${cmd[0]}"
+    # shellcheck disable=SC2206
+    local cmd=($candidate)
+    local exe="${cmd[0]}"
 
-  if [ ! -x "$exe" ]; then
-    SHEBANG_ERRORS+=(" - FAIL (not executable): #!$candidate")
+    if [ ! -x "$exe" ]; then
+        SHEBANG_ERRORS+=(" - FAIL (not executable): #!$candidate")
+        return 1
+    fi
+
+    tmp="${EXEC_DIR%/}/shebang_test.$$.$RANDOM"
+    errfile="${EXEC_DIR%/}/shebang_probe_err.$$"
+    {
+        printf '#!%s\n' "$candidate"
+        printf '%s\n' "$probe_script_content"
+    } > "$tmp"
+    chmod 700 "$tmp" 2> /dev/null || true
+
+    set +e
+    out="$("$tmp" 2> "$errfile")"
+    rc=$?
+    set -e
+
+    rm -f "$tmp" 2> /dev/null || true
+
+    if [ "$rc" -eq 0 ] && [ -n "${out:-}" ] && [ "$out" != "null" ]; then
+        rm -f "$errfile" 2> /dev/null || true
+        return 0
+    fi
+
+    msg=$' - FAIL: #!'"$candidate"$'\n'"   rc=$rc, stdout='${out:-}'"$'\n'
+    if [ -s "$errfile" ]; then
+        msg+=$'   stderr:\n'
+        msg+="$(sed -n '1,8p' "$errfile")"$'\n'
+    else
+        msg+=$'   stderr: <empty>\n'
+    fi
+    SHEBANG_ERRORS+=("$msg")
+    rm -f "$errfile" 2> /dev/null || true
     return 1
-  fi
-
-  tmp="${EXEC_DIR%/}/shebang_test.$$.$RANDOM"
-  errfile="${EXEC_DIR%/}/shebang_probe_err.$$"
-  {
-    printf '#!%s\n' "$candidate"
-    printf '%s\n' "$probe_script_content"
-  } >"$tmp"
-  chmod 700 "$tmp" 2>/dev/null || true
-
-  set +e
-  out="$("$tmp" 2>"$errfile")"
-  rc=$?
-  set -e
-
-  rm -f "$tmp" 2>/dev/null || true
-
-  if [ "$rc" -eq 0 ] && [ -n "${out:-}" ] && [ "$out" != "null" ]; then
-    rm -f "$errfile" 2>/dev/null || true
-    return 0
-  fi
-
-  msg=$' - FAIL: #!'"$candidate"$'\n'"   rc=$rc, stdout='${out:-}'"$'\n'
-  if [ -s "$errfile" ]; then
-    msg+=$'   stderr:\n'
-    msg+="$(sed -n '1,8p' "$errfile")"$'\n'
-  else
-    msg+=$'   stderr: <empty>\n'
-  fi
-  SHEBANG_ERRORS+=("$msg")
-  rm -f "$errfile" 2>/dev/null || true
-  return 1
 }
 
 shebang=""
 for candidate in "${candidate_shebangs[@]}"; do
-  if validate_shebang "$candidate"; then
-    shebang="$candidate"
-    break
-  fi
+    if validate_shebang "$candidate"; then
+        shebang="$candidate"
+        break
+    fi
 done
 
 if [ -z "$shebang" ]; then
-  echo "ERROR: No valid shebang found." >&2
-  printf ' - %s\n' "${candidate_shebangs[@]}" >&2
-  if [ "${#SHEBANG_ERRORS[@]}" -gt 0 ]; then
-    printf '%s\n' "${SHEBANG_ERRORS[@]}" >&2
-  fi
-  exit 1
+    echo "ERROR: No valid shebang found." >&2
+    printf ' - %s\n' "${candidate_shebangs[@]}" >&2
+    if [ "${#SHEBANG_ERRORS[@]}" -gt 0 ]; then
+        printf '%s\n' "${SHEBANG_ERRORS[@]}" >&2
+    fi
+    exit 1
 fi
 
-if ! command -v bashio::addon.version >/dev/null 2>&1; then
-  for f in /usr/lib/bashio/bashio.sh /usr/lib/bashio/lib.sh /usr/src/bashio/bashio.sh /usr/local/lib/bashio/bashio.sh /usr/local/lib/bashio-standalone.sh; do
-    if [ -f "$f" ]; then
-      # shellcheck disable=SC1090
-      . "$f"
-      break
-    fi
-  done
+if ! command -v bashio::addon.version > /dev/null 2>&1; then
+    for f in /usr/lib/bashio/bashio.sh /usr/lib/bashio/lib.sh /usr/src/bashio/bashio.sh /usr/local/lib/bashio/bashio.sh /usr/local/lib/bashio-standalone.sh; do
+        if [ -f "$f" ]; then
+            # shellcheck disable=SC1090
+            . "$f"
+            break
+        fi
+    done
 fi
 
 ##################
@@ -162,9 +168,9 @@ fi
 ##################
 
 # Exit if /config is not mounted or HA not used
-if [ ! -d /config ] || ! bashio::supervisor.ping 2>/dev/null; then
-  echo "..."
-  exit 0
+if [ ! -d /config ] || ! bashio::supervisor.ping 2> /dev/null; then
+    echo "..."
+    exit 0
 fi
 
 # Define slug
@@ -173,11 +179,11 @@ slug="${slug#*_}"
 
 # Check type of config folder
 if [ ! -f /config/configuration.yaml ] && [ ! -f /config/configuration.json ]; then
-  CONFIGLOCATION="/config"
-  CONFIGFILEBROWSER="/addon_configs/${HOSTNAME/-/_}/$slug.sh"
+    CONFIGLOCATION="/config"
+    CONFIGFILEBROWSER="/addon_configs/${HOSTNAME/-/_}/$slug.sh"
 else
-  CONFIGLOCATION="/config/addons_autoscripts"
-  CONFIGFILEBROWSER="/homeassistant/addons_autoscripts/$slug.sh"
+    CONFIGLOCATION="/config/addons_autoscripts"
+    CONFIGFILEBROWSER="/homeassistant/addons_autoscripts/$slug.sh"
 fi
 
 # Default location
@@ -189,28 +195,28 @@ bashio::log.green "Execute $CONFIGFILEBROWSER if existing"
 
 # Download template if no script found and exit
 if [ ! -f "$CONFIGSOURCE" ]; then
-  TEMPLATESOURCE="https://raw.githubusercontent.com/alexbelgium/hassio-addons/master/.templates/script.template"
-  curl -f -L -s -S "$TEMPLATESOURCE" --output "$CONFIGSOURCE" || true
-  exit 0
+    TEMPLATESOURCE="https://raw.githubusercontent.com/alexbelgium/hassio-addons/master/.templates/script.template"
+    curl -f -L -s -S "$TEMPLATESOURCE" --output "$CONFIGSOURCE" || true
+    exit 0
 fi
 
 # Convert scripts to linux
-dos2unix "$CONFIGSOURCE" >/dev/null 2>&1 || true
+dos2unix "$CONFIGSOURCE" > /dev/null 2>&1 || true
 chmod +x "$CONFIGSOURCE"
 
 if grep -q 'bashio' "$CONFIGSOURCE"; then
-  sed -i "1s|^.*|#!$shebang|" "$CONFIGSOURCE"
+    sed -i "1s|^.*|#!$shebang|" "$CONFIGSOURCE"
 else
-  sed -i '1s|^.*|#!/bin/bash|' "$CONFIGSOURCE"
+    sed -i '1s|^.*|#!/bin/bash|' "$CONFIGSOURCE"
 fi
 
 # Check if there is actual commands
 while IFS= read -r line; do
-  line="$(echo "$line" | sed -e 's/^[[:space:]]*//' -e 's/[[:space:]]*$//')"
+    line="$(echo "$line" | sed -e 's/^[[:space:]]*//' -e 's/[[:space:]]*$//')"
 
-  if [[ -n "$line" ]] && [[ ! "$line" =~ ^# ]]; then
-    bashio::log.green "... script found, executing"
-    "$CONFIGSOURCE"
-    break
-  fi
+    if [[ -n "$line" ]] && [[ ! "$line" =~ ^# ]]; then
+        bashio::log.green "... script found, executing"
+        "$CONFIGSOURCE"
+        break
+    fi
 done < "$CONFIGSOURCE"

.templates/90-dns_set.sh

@@ -9,12 +9,12 @@ set -e
 # Avoid usage of local dns such as adguard home or pihole\n"
 
 if bashio::config.has_value 'DNS_server'; then
-    if  ! bashio::config.true "openvpn_enabled" && ! bashio::config.true "wireguard_enabled"; then
+    if ! bashio::config.true "openvpn_enabled" && ! bashio::config.true "wireguard_enabled"; then
         # Define variables
         DNSSERVER=$(bashio::config 'DNS_server')
         DNS=""
         DNSLIST=""
-    
+
         # Get DNS servers
         # shellcheck disable=SC2086
         for server in ${DNSSERVER//,/ }; do # Separate comma separated values
@@ -26,7 +26,7 @@ if bashio::config.has_value 'DNS_server'; then
                 bashio::log.warning "DNS $server was requested but can't be pinged. It won't be used"
             fi
         done
-    
+
         # Only add DNS if there are DNS set
         # shellcheck disable=SC2236
         if [[ -n "${DNS:-}" ]]; then

.templates/bashio-standalone.sh

@@ -33,293 +33,297 @@ _BASHIO_COLOR=1
 [ "${TERM:-}" = "dumb" ] && _BASHIO_COLOR=0
 
 _bashio_color() {
-  [ "$_BASHIO_COLOR" = "1" ] || return 0
-  case "${1:-}" in
-    blue)    printf '\033[34m' ;;
-    green)   printf '\033[32m' ;;
-    yellow)  printf '\033[33m' ;;
-    red)     printf '\033[31m' ;;
-    magenta) printf '\033[35m' ;;
-    reset)   printf '\033[0m'  ;;
-    *)       printf '' ;;
-  esac
+    [ "$_BASHIO_COLOR" = "1" ] || return 0
+    case "${1:-}" in
+        blue) printf '\033[34m' ;;
+        green) printf '\033[32m' ;;
+        yellow) printf '\033[33m' ;;
+        red) printf '\033[31m' ;;
+        magenta) printf '\033[35m' ;;
+        reset) printf '\033[0m' ;;
+        *) printf '' ;;
+    esac
 }
 
 _bashio_log() {
-  local c="${1:-}"; shift || true
-  printf '%s%s%s\n' "$(_bashio_color "$c")" "$*" "$(_bashio_color reset)"
+    local c="${1:-}"
+    shift || true
+    printf '%s%s%s\n' "$(_bashio_color "$c")" "$*" "$(_bashio_color reset)"
 }
 
 # -----------------------------------------------------------------------------
 # Helpers
 # -----------------------------------------------------------------------------
 _bashio_is_true() {
-  case "${1:-}" in
-    1|true|TRUE|True|yes|YES|Yes|on|ON|On) return 0 ;;
-    *) return 1 ;;
-  esac
+    case "${1:-}" in
+        1 | true | TRUE | True | yes | YES | Yes | on | ON | On) return 0 ;;
+        *) return 1 ;;
+    esac
 }
 
 # ENV mapping helper:
 # tries variants + prefixes and prints the value if env var is defined (even empty),
 # returning 0 when found, 1 when not found.
 _bashio_env_get() {
-  local key="${1:-}"
-  [ -n "$key" ] || return 1
+    local key="${1:-}"
+    [ -n "$key" ] || return 1
 
-  local norm norm_uc raw_uc
-  norm="$(printf '%s' "$key" | tr '.-' '__')"
-  norm_uc="$(printf '%s' "$norm" | tr '[:lower:]' '[:upper:]')"
-  raw_uc="$(printf '%s' "$key" | tr '[:lower:]' '[:upper:]')"
+    local norm norm_uc raw_uc
+    norm="$(printf '%s' "$key" | tr '.-' '__')"
+    norm_uc="$(printf '%s' "$norm" | tr '[:lower:]' '[:upper:]')"
+    raw_uc="$(printf '%s' "$key" | tr '[:lower:]' '[:upper:]')"
 
-  local variants=(
-    "$key"
-    "$raw_uc"
-    "$norm"
-    "$norm_uc"
-  )
+    local variants=(
+        "$key"
+        "$raw_uc"
+        "$norm"
+        "$norm_uc"
+    )
 
-  local prefixes=("" "CFG_" "CONFIG_" "ADDON_" "OPTION_" "OPT_")
+    local prefixes=("" "CFG_" "CONFIG_" "ADDON_" "OPTION_" "OPT_")
 
-  local v p name
-  for v in "${variants[@]}"; do
-    for p in "${prefixes[@]}"; do
-      name="${p}${v}"
-      if [ -n "${!name+x}" ]; then
-        printf '%s' "${!name}"
-        return 0
-      fi
+    local v p name
+    for v in "${variants[@]}"; do
+        for p in "${prefixes[@]}"; do
+            name="${p}${v}"
+            if [ -n "${!name+x}" ]; then
+                printf '%s' "${!name}"
+                return 0
+            fi
+        done
     done
-  done
 
-  return 1
+    return 1
 }
 
 # env presence (even if empty) used by config.exists
 _bashio_env_has() {
-  local key="${1:-}"
-  [ -n "$key" ] || return 1
-  _bashio_env_get "$key" >/dev/null 2>&1
+    local key="${1:-}"
+    [ -n "$key" ] || return 1
+    _bashio_env_get "$key" > /dev/null 2>&1
 }
 
 # JSON options source (jq required). Prints value or empty; returns 0 always.
 _bashio_json_get() {
-  local key="${1:-}"
-  local file="${STANDALONE_OPTIONS_JSON:-}"
+    local key="${1:-}"
+    local file="${STANDALONE_OPTIONS_JSON:-}"
 
-  [ -n "$key" ] || return 0
-  [ -n "$file" ] || return 0
-  [ -f "$file" ] || return 0
-  command -v jq >/dev/null 2>&1 || return 0
+    [ -n "$key" ] || return 0
+    [ -n "$file" ] || return 0
+    [ -f "$file" ] || return 0
+    command -v jq > /dev/null 2>&1 || return 0
 
-  # getpath(split(".")) supports nested access; missing => empty
-  jq -er --arg k "$key" 'getpath(($k|split("."))) // empty' "$file" 2>/dev/null || true
+    # getpath(split(".")) supports nested access; missing => empty
+    jq -er --arg k "$key" 'getpath(($k|split("."))) // empty' "$file" 2> /dev/null || true
 }
 
 # Net wait using /dev/tcp with a timeout
 _bashio_tcp_wait() {
-  local host="${1:-}" port="${2:-}" to="${3:-30}"
-  [ -n "$host" ] && [ -n "$port" ] || return 1
+    local host="${1:-}" port="${2:-}" to="${3:-30}"
+    [ -n "$host" ] && [ -n "$port" ] || return 1
 
-  local start now
-  start="$(date +%s)"
-  while :; do
-    if exec 3<>"/dev/tcp/${host}/${port}" 2>/dev/null; then
-      exec 3>&- 3<&-
-      return 0
-    fi
-    now="$(date +%s)"
-    if [ $((now - start)) -ge "$to" ]; then
-      return 1
-    fi
-    sleep 1
-  done
+    local start now
+    start="$(date +%s)"
+    while :; do
+        if exec 3<> "/dev/tcp/${host}/${port}" 2> /dev/null; then
+            exec 3>&- 3<&-
+            return 0
+        fi
+        now="$(date +%s)"
+        if [ $((now - start)) -ge "$to" ]; then
+            return 1
+        fi
+        sleep 1
+    done
 }
 
 # Prefer nc if present, fallback to /dev/tcp
 _bashio_tcp_wait_nc() {
-  command -v nc >/dev/null 2>&1 || return 1
-  local host="${1:-}" port="${2:-}" to="${3:-30}"
-  # BusyBox and OpenBSD nc differ; cover both styles
-  nc -z -w "$to" "$host" "$port" 2>/dev/null || nc -z "$host" "$port" 2>/dev/null
+    command -v nc > /dev/null 2>&1 || return 1
+    local host="${1:-}" port="${2:-}" to="${3:-30}"
+    # BusyBox and OpenBSD nc differ; cover both styles
+    nc -z -w "$to" "$host" "$port" 2> /dev/null || nc -z "$host" "$port" 2> /dev/null
 }
 
 # -----------------------------------------------------------------------------
 # Logging API
 # -----------------------------------------------------------------------------
-bashio::log.blue()    { _bashio_log blue    "$*"; }
-bashio::log.green()   { _bashio_log green   "$*"; }
-bashio::log.yellow()  { _bashio_log yellow  "$*"; }
-bashio::log.red()     { _bashio_log red     "$*"; }
+bashio::log.blue() { _bashio_log blue "$*"; }
+bashio::log.green() { _bashio_log green "$*"; }
+bashio::log.yellow() { _bashio_log yellow "$*"; }
+bashio::log.red() { _bashio_log red "$*"; }
 bashio::log.magenta() { _bashio_log magenta "$*"; }
 
 # Common aliases
-bashio::log.info()    { bashio::log.blue   "$@"; }
+bashio::log.info() { bashio::log.blue "$@"; }
 bashio::log.warning() { bashio::log.yellow "$@"; }
-bashio::log.error()   { bashio::log.red    "$@"; }
-bashio::log.debug()   { printf '%s\n' "$*"; }
+bashio::log.error() { bashio::log.red "$@"; }
+bashio::log.debug() { printf '%s\n' "$*"; }
 
 # -----------------------------------------------------------------------------
 # Supervisor shim
 # -----------------------------------------------------------------------------
 bashio::supervisor.ping() {
-  _bashio_is_true "${STANDALONE_FORCE_SUPERVISOR_PING:-}" && return 0
-  return 1
+    _bashio_is_true "${STANDALONE_FORCE_SUPERVISOR_PING:-}" && return 0
+    return 1
 }
 
 # -----------------------------------------------------------------------------
 # Add-on metadata
 # -----------------------------------------------------------------------------
-bashio::addon.name()         { printf '%s' "${ADDON_NAME:-Standalone container}"; }
-bashio::addon.description()  { printf '%s' "${ADDON_DESCRIPTION:-Running without Home Assistant Supervisor}"; }
-bashio::addon.version()      { printf '%s' "${BUILD_VERSION:-1.0}"; }
-bashio::addon.version_latest(){ printf '%s' "${ADDON_VERSION_LATEST:-${BUILD_VERSION:-1.0}}"; }
+bashio::addon.name() { printf '%s' "${ADDON_NAME:-Standalone container}"; }
+bashio::addon.description() { printf '%s' "${ADDON_DESCRIPTION:-Running without Home Assistant Supervisor}"; }
+bashio::addon.version() { printf '%s' "${BUILD_VERSION:-1.0}"; }
+bashio::addon.version_latest() { printf '%s' "${ADDON_VERSION_LATEST:-${BUILD_VERSION:-1.0}}"; }
 
 bashio::addon.update_available() {
-  if [ -n "${ADDON_VERSION_LATEST:-}" ] && [ "${ADDON_VERSION_LATEST:-}" != "${BUILD_VERSION:-}" ]; then
-    printf '%s' "true"
-  else
-    printf '%s' "false"
-  fi
+    if [ -n "${ADDON_VERSION_LATEST:-}" ] && [ "${ADDON_VERSION_LATEST:-}" != "${BUILD_VERSION:-}" ]; then
+        printf '%s' "true"
+    else
+        printf '%s' "false"
+    fi
 }
 
-bashio::addon.ingress_port()  { printf '%s' "${ADDON_INGRESS_PORT:-}"; }
+bashio::addon.ingress_port() { printf '%s' "${ADDON_INGRESS_PORT:-}"; }
 bashio::addon.ingress_entry() { printf '%s' "${ADDON_INGRESS_ENTRY:-}"; }
-bashio::addon.ip_address()    { printf '%s' "${ADDON_IP_ADDRESS:-}"; }
+bashio::addon.ip_address() { printf '%s' "${ADDON_IP_ADDRESS:-}"; }
 
 # Ports:
 # - numeric arg "8080" -> env PORT_8080 or ADDON_PORT_8080, fallback to the number
 # - non-numeric "WEB_PORT" -> resolve as config/env key
 bashio::addon.port() {
-  local arg="${1:-}"
-  if [[ "$arg" =~ ^[0-9]+$ ]]; then
-    local v=""
-    v="$(_bashio_env_get "PORT_${arg}" 2>/dev/null || true)"
-    [ -z "$v" ] && v="$(_bashio_env_get "ADDON_PORT_${arg}" 2>/dev/null || true)"
-    printf '%s' "${v:-$arg}"
-  else
-    printf '%s' "$(_bashio_env_get "$arg" 2>/dev/null || true)"
-  fi
+    local arg="${1:-}"
+    if [[ "$arg" =~ ^[0-9]+$ ]]; then
+        local v=""
+        v="$(_bashio_env_get "PORT_${arg}" 2> /dev/null || true)"
+        [ -z "$v" ] && v="$(_bashio_env_get "ADDON_PORT_${arg}" 2> /dev/null || true)"
+        printf '%s' "${v:-$arg}"
+    else
+        printf '%s' "$(_bashio_env_get "$arg" 2> /dev/null || true)"
+    fi
 }
 
 # addon.option : write/delete option in JSON when possible; fallback export env
 bashio::addon.option() {
-  local key="${1:-}" value="${2-__BASHIO_UNSET__}" file="${STANDALONE_OPTIONS_JSON:-}"
-  [ -n "$key" ] || return 0
+    local key="${1:-}" value="${2-__BASHIO_UNSET__}" file="${STANDALONE_OPTIONS_JSON:-}"
+    [ -n "$key" ] || return 0
 
-  if [ -n "$file" ] && [ -f "$file" ] && command -v jq >/dev/null 2>&1; then
-    local tmp
-    tmp="$(mktemp)"
-    if [ "$value" = "__BASHIO_UNSET__" ]; then
-      jq --arg k "$key" 'delpath(($k|split(".")))' "$file" >"$tmp" && mv "$tmp" "$file"
-    else
-      jq --arg k "$key" --arg v "$value" 'setpath(($k|split(".")); $v)' "$file" >"$tmp" && mv "$tmp" "$file"
+    if [ -n "$file" ] && [ -f "$file" ] && command -v jq > /dev/null 2>&1; then
+        local tmp
+        tmp="$(mktemp)"
+        if [ "$value" = "__BASHIO_UNSET__" ]; then
+            jq --arg k "$key" 'delpath(($k|split(".")))' "$file" > "$tmp" && mv "$tmp" "$file"
+        else
+            jq --arg k "$key" --arg v "$value" 'setpath(($k|split(".")); $v)' "$file" > "$tmp" && mv "$tmp" "$file"
+        fi
+        return 0
     fi
-    return 0
-  fi
 
-  # Fallback: export as env (dot/dash -> underscore). Delete becomes no-op.
-  if [ "$value" != "__BASHIO_UNSET__" ]; then
-    export "$(printf '%s' "$key" | tr '.-' '__')"="$value"
-  fi
+    # Fallback: export as env (dot/dash -> underscore). Delete becomes no-op.
+    if [ "$value" != "__BASHIO_UNSET__" ]; then
+        export "$(printf '%s' "$key" | tr '.-' '__')"="$value"
+    fi
 }
 
 # -----------------------------------------------------------------------------
 # System info
 # -----------------------------------------------------------------------------
 bashio::info.operating_system() {
-  if [ -r /etc/os-release ]; then
-    # shellcheck disable=SC1091
-    . /etc/os-release
-    printf '%s' "${PRETTY_NAME:-${NAME:-Linux}}"
-  else
-    printf '%s' "Linux"
-  fi
+    if [ -r /etc/os-release ]; then
+        # shellcheck disable=SC1091
+        . /etc/os-release
+        printf '%s' "${PRETTY_NAME:-${NAME:-Linux}}"
+    else
+        printf '%s' "Linux"
+    fi
 }
-bashio::info.arch()         { uname -m; }
-bashio::info.machine()      { uname -m; }
-bashio::info.homeassistant(){ printf '%s' "standalone"; }
-bashio::info.supervisor()  { printf '%s' "standalone"; }
+bashio::info.arch() { uname -m; }
+bashio::info.machine() { uname -m; }
+bashio::info.homeassistant() { printf '%s' "standalone"; }
+bashio::info.supervisor() { printf '%s' "standalone"; }
 
 # -----------------------------------------------------------------------------
 # Config API
 # -----------------------------------------------------------------------------
 bashio::config() {
-  local key="${1:-}"
-  [ -n "$key" ] || { printf '%s' ""; return 0; }
+    local key="${1:-}"
+    [ -n "$key" ] || {
+        printf '%s' ""
+        return 0
+    }
 
-  local v=""
-  if _bashio_env_get "$key" >/dev/null 2>&1; then
-    v="$(_bashio_env_get "$key" 2>/dev/null || true)"
-  fi
-  [ -z "$v" ] && v="$(_bashio_json_get "$key")"
-  printf '%s' "${v:-}"
+    local v=""
+    if _bashio_env_get "$key" > /dev/null 2>&1; then
+        v="$(_bashio_env_get "$key" 2> /dev/null || true)"
+    fi
+    [ -z "$v" ] && v="$(_bashio_json_get "$key")"
+    printf '%s' "${v:-}"
 }
 
 bashio::config.has_value() { [ -n "$(bashio::config "$1")" ]; }
 
 bashio::config.true() {
-  _bashio_is_true "$(bashio::config "$1")"
+    _bashio_is_true "$(bashio::config "$1")"
 }
 
 # config.exists : key is present (env or JSON), even if value is empty
 bashio::config.exists() {
-  local key="${1:-}" file="${STANDALONE_OPTIONS_JSON:-}"
-  [ -n "$key" ] || return 1
+    local key="${1:-}" file="${STANDALONE_OPTIONS_JSON:-}"
+    [ -n "$key" ] || return 1
 
-  if _bashio_env_has "$key"; then
-    return 0
-  fi
+    if _bashio_env_has "$key"; then
+        return 0
+    fi
 
-  if [ -n "$file" ] && [ -f "$file" ] && command -v jq >/dev/null 2>&1; then
-    jq -e --arg k "$key" 'haspath(($k|split(".")))' "$file" >/dev/null 2>&1
-    return $?
-  fi
+    if [ -n "$file" ] && [ -f "$file" ] && command -v jq > /dev/null 2>&1; then
+        jq -e --arg k "$key" 'haspath(($k|split(".")))' "$file" > /dev/null 2>&1
+        return $?
+    fi
 
-  return 1
+    return 1
 }
 
 # Common "require.*" shims (advisory/no-op in standalone)
-bashio::config.require.ssl()      { printf '%s' "${REQUIRE_SSL:-true}"; }
+bashio::config.require.ssl() { printf '%s' "${REQUIRE_SSL:-true}"; }
 bashio::config.require.username() { :; }
 bashio::config.require.password() { :; }
-bashio::config.require.port()     { :; }
+bashio::config.require.port() { :; }
 
 # config.array:
 # Accepts CSV ("a,b,c"), space/newline-separated text, or JSON array ["a","b"].
 # Prints one item per line.
 bashio::config.array() {
-  local key="${1:-}" raw
-  raw="$(bashio::config "$key")"
-  [ -n "$raw" ] || return 0
+    local key="${1:-}" raw
+    raw="$(bashio::config "$key")"
+    [ -n "$raw" ] || return 0
 
-  if command -v jq >/dev/null 2>&1 && printf '%s' "$raw" | jq -e . >/dev/null 2>&1; then
-    printf '%s' "$raw" | jq -r '.[]' 2>/dev/null && return 0
-  fi
+    if command -v jq > /dev/null 2>&1 && printf '%s' "$raw" | jq -e . > /dev/null 2>&1; then
+        printf '%s' "$raw" | jq -r '.[]' 2> /dev/null && return 0
+    fi
 
-  if printf '%s' "$raw" | grep -q ','; then
-    printf '%s' "$raw" | tr ',' '\n'
-    return 0
-  fi
+    if printf '%s' "$raw" | grep -q ','; then
+        printf '%s' "$raw" | tr ',' '\n'
+        return 0
+    fi
 
-  printf '%s\n' "$raw"
+    printf '%s\n' "$raw"
 }
 
 # -----------------------------------------------------------------------------
 # var helpers
 # -----------------------------------------------------------------------------
-bashio::var.true()      { _bashio_is_true "${1:-}"; }
-bashio::var.false()     { ! _bashio_is_true "${1:-}"; }
+bashio::var.true() { _bashio_is_true "${1:-}"; }
+bashio::var.false() { ! _bashio_is_true "${1:-}"; }
 bashio::var.has_value() { [ -n "${1:-}" ]; }
 
 # -----------------------------------------------------------------------------
 # Filesystem helpers
 # -----------------------------------------------------------------------------
-bashio::fs.file_exists()      { [ -f "${1:-}" ]; }
+bashio::fs.file_exists() { [ -f "${1:-}" ]; }
 bashio::fs.directory_exists() { [ -d "${1:-}" ]; }
 bashio::fs.file_contains() {
-  local f="${1:-}" p="${2:-}"
-  [ -f "$f" ] && grep -q -- "$p" "$f" 2>/dev/null
+    local f="${1:-}" p="${2:-}"
+    [ -f "$f" ] && grep -q -- "$p" "$f" 2> /dev/null
 }
 
 # -----------------------------------------------------------------------------
@@ -327,25 +331,25 @@ bashio::fs.file_contains() {
 # -----------------------------------------------------------------------------
 # Wait for TCP service: bashio::net.wait_for host port [timeout]
 bashio::net.wait_for() {
-  local host="${1:-}" port="${2:-}" to="${3:-30}"
-  _bashio_tcp_wait_nc "$host" "$port" "$to" && return 0
-  _bashio_tcp_wait "$host" "$port" "$to"
+    local host="${1:-}" port="${2:-}" to="${3:-30}"
+    _bashio_tcp_wait_nc "$host" "$port" "$to" && return 0
+    _bashio_tcp_wait "$host" "$port" "$to"
 }
 
 # DNS helper: bashio::dns.host <hostname> -> prints an IP (or empty)
 bashio::dns.host() {
-  local h="${1:-}"
-  [ -n "$h" ] || return 1
-  if command -v getent >/dev/null 2>&1; then
-    getent ahostsv4 "$h" | awk '{print $1; exit}'
-  else
-    nslookup "$h" 2>/dev/null | awk '/^Address: /{print $2; exit}'
-  fi
+    local h="${1:-}"
+    [ -n "$h" ] || return 1
+    if command -v getent > /dev/null 2>&1; then
+        getent ahostsv4 "$h" | awk '{print $1; exit}'
+    else
+        nslookup "$h" 2> /dev/null | awk '/^Address: /{print $2; exit}'
+    fi
 }
 
 # Hostname
 bashio::host.hostname() {
-  command -v hostname >/dev/null 2>&1 && hostname || printf '%s' "${HOSTNAME:-unknown}"
+    command -v hostname > /dev/null 2>&1 && hostname || printf '%s' "${HOSTNAME:-unknown}"
 }
 
 # -----------------------------------------------------------------------------
@@ -355,40 +359,43 @@ bashio::host.hostname() {
 #   bashio::services "mqtt" "host"
 #   bashio::services.available "mqtt"
 bashio::services() {
-  local svc="${1:-}" key="${2:-}"
-  [ -n "$svc" ] && [ -n "$key" ] || { printf '%s' ""; return 0; }
+    local svc="${1:-}" key="${2:-}"
+    [ -n "$svc" ] && [ -n "$key" ] || {
+        printf '%s' ""
+        return 0
+    }
 
-  local upper svc_upper var v=""
-  upper="$(printf '%s' "$key" | tr '[:lower:]' '[:upper:]')"
-  svc_upper="$(printf '%s' "$svc" | tr '[:lower:]' '[:upper:]')"
+    local upper svc_upper var v=""
+    upper="$(printf '%s' "$key" | tr '[:lower:]' '[:upper:]')"
+    svc_upper="$(printf '%s' "$svc" | tr '[:lower:]' '[:upper:]')"
 
-  # Common mappings
-  case "$svc_upper:$upper" in
-    MQTT:HOST)     var="MQTT_HOST" ;;
-    MQTT:PORT)     var="MQTT_PORT" ;;
-    MQTT:USERNAME) var="MQTT_USER" ;;
-    MQTT:PASSWORD) var="MQTT_PASSWORD" ;;
-    MQTT:TLS)      var="MQTT_TLS" ;;
-    MYSQL:HOST|MARIADB:HOST)         var="DB_HOST" ;;
-    MYSQL:PORT|MARIADB:PORT)         var="DB_PORT" ;;
-    MYSQL:USERNAME|MARIADB:USERNAME) var="DB_USER" ;;
-    MYSQL:PASSWORD|MARIADB:PASSWORD) var="DB_PASSWORD" ;;
-    MYSQL:DATABASE|MARIADB:DATABASE) var="DB_NAME" ;;
-    *) var="${svc_upper}_${upper}" ;;
-  esac
+    # Common mappings
+    case "$svc_upper:$upper" in
+        MQTT:HOST) var="MQTT_HOST" ;;
+        MQTT:PORT) var="MQTT_PORT" ;;
+        MQTT:USERNAME) var="MQTT_USER" ;;
+        MQTT:PASSWORD) var="MQTT_PASSWORD" ;;
+        MQTT:TLS) var="MQTT_TLS" ;;
+        MYSQL:HOST | MARIADB:HOST) var="DB_HOST" ;;
+        MYSQL:PORT | MARIADB:PORT) var="DB_PORT" ;;
+        MYSQL:USERNAME | MARIADB:USERNAME) var="DB_USER" ;;
+        MYSQL:PASSWORD | MARIADB:PASSWORD) var="DB_PASSWORD" ;;
+        MYSQL:DATABASE | MARIADB:DATABASE) var="DB_NAME" ;;
+        *) var="${svc_upper}_${upper}" ;;
+    esac
 
-  v="$(_bashio_env_get "$var" 2>/dev/null || true)"
-  if [ -z "$v" ]; then
-    v="$(_bashio_json_get "services.${svc}.${key}")"
-    [ -z "$v" ] && v="$(_bashio_json_get "${svc}.${key}")"
-  fi
-  printf '%s' "${v:-}"
+    v="$(_bashio_env_get "$var" 2> /dev/null || true)"
+    if [ -z "$v" ]; then
+        v="$(_bashio_json_get "services.${svc}.${key}")"
+        [ -z "$v" ] && v="$(_bashio_json_get "${svc}.${key}")"
+    fi
+    printf '%s' "${v:-}"
 }
 
 bashio::services.available() {
-  local svc="${1:-}" host
-  host="$(bashio::services "$svc" "host")"
-  [ -n "$host" ]
+    local svc="${1:-}" host
+    host="$(bashio::services "$svc" "host")"
+    [ -n "$host" ]
 }
 
 # -----------------------------------------------------------------------------
@@ -396,39 +403,43 @@ bashio::services.available() {
 # -----------------------------------------------------------------------------
 mkdir -p "$BASHIO_CACHE_DIR"
 bashio::cache.exists() { [ -f "$BASHIO_CACHE_DIR/${1}.cache" ]; }
-bashio::cache.get()    { [ -f "$BASHIO_CACHE_DIR/${1}.cache" ] && cat "$BASHIO_CACHE_DIR/${1}.cache"; }
-bashio::cache.set()    { printf '%s' "${2:-}" > "$BASHIO_CACHE_DIR/${1}.cache"; }
+bashio::cache.get() { [ -f "$BASHIO_CACHE_DIR/${1}.cache" ] && cat "$BASHIO_CACHE_DIR/${1}.cache"; }
+bashio::cache.set() { printf '%s' "${2:-}" > "$BASHIO_CACHE_DIR/${1}.cache"; }
 
 # -----------------------------------------------------------------------------
 # jq wrapper (some add-ons call bashio::jq)
 # -----------------------------------------------------------------------------
-bashio::jq() { command -v jq >/dev/null 2>&1 && jq "$@"; }
+bashio::jq() { command -v jq > /dev/null 2>&1 && jq "$@"; }
 
 # -----------------------------------------------------------------------------
 # Home Assistant token
 # -----------------------------------------------------------------------------
 bashio::homeassistant.token() {
-  local t="${HOMEASSISTANT_TOKEN:-${HASS_TOKEN:-}}"
-  if [ -z "$t" ] && [ -n "${STANDALONE_OPTIONS_JSON:-}" ] && [ -f "${STANDALONE_OPTIONS_JSON:-}" ] && command -v jq >/dev/null 2>&1; then
-    t="$(jq -er '.homeassistant.token // empty' "$STANDALONE_OPTIONS_JSON" 2>/dev/null || true)"
-  fi
-  printf '%s' "${t:-}"
+    local t="${HOMEASSISTANT_TOKEN:-${HASS_TOKEN:-}}"
+    if [ -z "$t" ] && [ -n "${STANDALONE_OPTIONS_JSON:-}" ] && [ -f "${STANDALONE_OPTIONS_JSON:-}" ] && command -v jq > /dev/null 2>&1; then
+        t="$(jq -er '.homeassistant.token // empty' "$STANDALONE_OPTIONS_JSON" 2> /dev/null || true)"
+    fi
+    printf '%s' "${t:-}"
 }
 
 # -----------------------------------------------------------------------------
 # Exit helpers
 # -----------------------------------------------------------------------------
-bashio::exit.ok()  { exit 0; }
-bashio::exit.nok() { local m="${1:-}"; [ -n "$m" ] && bashio::log.red "$m"; exit 1; }
+bashio::exit.ok() { exit 0; }
+bashio::exit.nok() {
+    local m="${1:-}"
+    [ -n "$m" ] && bashio::log.red "$m"
+    exit 1
+}
 
 # -----------------------------------------------------------------------------
 # Core config check shim
 # -----------------------------------------------------------------------------
 # Set STANDALONE_CORE_CHECK_CMD="hass --script check_config -c /config" to enable
 bashio::core.check() {
-  if [ -n "${STANDALONE_CORE_CHECK_CMD:-}" ]; then
-    eval "$STANDALONE_CORE_CHECK_CMD"
-  else
-    return 0
-  fi
+    if [ -n "${STANDALONE_CORE_CHECK_CMD:-}" ]; then
+        eval "$STANDALONE_CORE_CHECK_CMD"
+    else
+        return 0
+    fi
 }

.templates/ha_autoapps.sh

@@ -41,14 +41,14 @@ restore_apt_sources_if_missing() {
                 mirror="http://ports.ubuntu.com/ubuntu-ports"
                 security_mirror="$mirror"
             fi
-            cat > /etc/apt/sources.list <<EOF2
+            cat > /etc/apt/sources.list << EOF2
 deb ${mirror} ${codename} main restricted universe multiverse
 deb ${mirror} ${codename}-updates main restricted universe multiverse
 deb ${security_mirror} ${codename}-security main restricted universe multiverse
 EOF2
             ;;
         debian)
-            cat > /etc/apt/sources.list <<EOF2
+            cat > /etc/apt/sources.list << EOF2
 deb http://deb.debian.org/debian ${codename} main contrib non-free non-free-firmware
 deb http://deb.debian.org/debian ${codename}-updates main contrib non-free non-free-firmware
 deb http://deb.debian.org/debian-security ${codename}-security main contrib non-free non-free-firmware

.templates/ha_automatic_packages.sh

@@ -184,7 +184,7 @@ done
 if [ "$PACKMANAGER" = "apt" ]; then apt-get update > /dev/null; fi
 if [ "$PACKMANAGER" = "pacman" ]; then pacman -Sy > /dev/null; fi
 if [ "$PACKMANAGER" = "apk" ] && [ -f /etc/apk/repositories ] && ! grep -q "community" /etc/apk/repositories; then
-    ALPINE_VER=$(cat /etc/alpine-release 2>/dev/null | cut -d. -f1,2)
+    ALPINE_VER=$(cat /etc/alpine-release 2> /dev/null | cut -d. -f1,2)
     if [ -n "$ALPINE_VER" ]; then
         echo "https://dl-cdn.alpinelinux.org/alpine/v${ALPINE_VER}/community" >> /etc/apk/repositories
         apk update > /dev/null
@@ -228,7 +228,7 @@ for files in "/etc/services.d" "/etc/cont-init.d"; do
     if ! ls $files 1> /dev/null 2>&1; then continue; fi
 
     # Bashio
-    if grep -q -rnw "${files}" -e 'bashio' 2>/dev/null && [ ! -f "/usr/bin/bashio" ]; then
+    if grep -q -rnw "${files}" -e 'bashio' 2> /dev/null && [ ! -f "/usr/bin/bashio" ]; then
         [ "$VERBOSE" = true ] && echo "install bashio"
         BASHIO_VERSION="v0.17.5"
         mkdir -p /tmp/bashio

.templates/ha_entrypoint.sh

@@ -7,13 +7,13 @@
 
 PID1=false
 if [ "$$" -eq 1 ]; then
-  PID1=true
-  echo "Starting as entrypoint"
-  if [ -d /command ]; then
-    ln -sf /command/* /usr/bin/ 2>/dev/null || true
-  fi
+    PID1=true
+    echo "Starting as entrypoint"
+    if [ -d /command ]; then
+        ln -sf /command/* /usr/bin/ 2> /dev/null || true
+    fi
 else
-  echo "Starting custom scripts"
+    echo "Starting custom scripts"
 fi
 
 ##########################################
@@ -21,31 +21,37 @@ fi
 ##########################################
 
 pick_exec_dir() {
-  # Prefer locations that are commonly exec-capable in containers
-  # and writable. Avoid /tmp because it may be mounted noexec.
-  local d
-  for d in /dev/shm /run /var/run /mnt /root /; do
-    if [ -d "$d" ] && [ -w "$d" ]; then
-      # Create a tiny test executable to confirm "exec" works
-      local t="${d%/}/.exec_test_$$"
-      printf '#!/bin/sh\necho ok\n' >"$t" 2>/dev/null || { rm -f "$t" 2>/dev/null || true; continue; }
-      chmod 700 "$t" 2>/dev/null || { rm -f "$t" 2>/dev/null || true; continue; }
-      if "$t" >/dev/null 2>&1; then
-        rm -f "$t" 2>/dev/null || true
-        echo "$d"
-        return 0
-      fi
-      rm -f "$t" 2>/dev/null || true
-    fi
-  done
-  return 1
+    # Prefer locations that are commonly exec-capable in containers
+    # and writable. Avoid /tmp because it may be mounted noexec.
+    local d
+    for d in /dev/shm /run /var/run /mnt /root /; do
+        if [ -d "$d" ] && [ -w "$d" ]; then
+            # Create a tiny test executable to confirm "exec" works
+            local t="${d%/}/.exec_test_$$"
+            printf '#!/bin/sh\necho ok\n' > "$t" 2> /dev/null || {
+                rm -f "$t" 2> /dev/null || true
+                continue
+            }
+            chmod 700 "$t" 2> /dev/null || {
+                rm -f "$t" 2> /dev/null || true
+                continue
+            }
+            if "$t" > /dev/null 2>&1; then
+                rm -f "$t" 2> /dev/null || true
+                echo "$d"
+                return 0
+            fi
+            rm -f "$t" 2> /dev/null || true
+        fi
+    done
+    return 1
 }
 
 EXEC_DIR="$(pick_exec_dir || true)"
 if [ -z "${EXEC_DIR:-}" ]; then
-  echo "ERROR: Could not find an exec-capable writable directory (e.g., /dev/shm,/run)."
-  echo "Your environment likely mounts all writable dirs as noexec; shebang validation cannot run safely."
-  exit 1
+    echo "ERROR: Could not find an exec-capable writable directory (e.g., /dev/shm,/run)."
+    echo "Your environment likely mounts all writable dirs as noexec; shebang validation cannot run safely."
+    exit 1
 fi
 
 ######################
@@ -53,14 +59,14 @@ fi
 ######################
 
 candidate_shebangs=(
-  "/command/with-contenv bashio"
-  "/usr/bin/with-contenv bashio"
-  "/usr/bin/env bashio"
-  "/usr/bin/bashio"
-  "/usr/bin/bash"
-  "/bin/bash"
-  "/usr/bin/sh"
-  "/bin/sh"
+    "/command/with-contenv bashio"
+    "/usr/bin/with-contenv bashio"
+    "/usr/bin/env bashio"
+    "/usr/bin/bashio"
+    "/usr/bin/bash"
+    "/bin/bash"
+    "/usr/bin/sh"
+    "/bin/sh"
 )
 
 SHEBANG_ERRORS=()
@@ -104,68 +110,68 @@ echo "${_bv:-PROBE_OK}"
 '
 
 validate_shebang() {
-  local candidate="$1"
-  local tmp out rc
-  local errfile msg
+    local candidate="$1"
+    local tmp out rc
+    local errfile msg
 
-  # shellcheck disable=SC2206
-  local cmd=( $candidate )
-  local exe="${cmd[0]}"
+    # shellcheck disable=SC2206
+    local cmd=($candidate)
+    local exe="${cmd[0]}"
 
-  if [ ! -x "$exe" ]; then
-    SHEBANG_ERRORS+=(" - FAIL (not executable): #!$candidate")
+    if [ ! -x "$exe" ]; then
+        SHEBANG_ERRORS+=(" - FAIL (not executable): #!$candidate")
+        return 1
+    fi
+
+    tmp="${EXEC_DIR%/}/shebang_test.$$.$RANDOM"
+    errfile="${EXEC_DIR%/}/shebang_probe_err.$$"
+    {
+        printf '#!%s\n' "$candidate"
+        printf '%s\n' "$probe_script_content"
+    } > "$tmp"
+    chmod 700 "$tmp" 2> /dev/null || true
+
+    set +e
+    out="$("$tmp" 2> "$errfile")"
+    rc=$?
+    set -e
+
+    rm -f "$tmp" 2> /dev/null || true
+
+    if [ "$rc" -eq 0 ] && [ -n "${out:-}" ] && [ "$out" != "null" ]; then
+        rm -f "$errfile" 2> /dev/null || true
+        return 0
+    fi
+
+    msg=$' - FAIL: #!'"$candidate"$'\n'"   rc=$rc, stdout='${out:-}'"$'\n'
+    if [ -s "$errfile" ]; then
+        msg+=$'   stderr:\n'
+        msg+="$(sed -n '1,8p' "$errfile")"$'\n'
+    else
+        msg+=$'   stderr: <empty>\n'
+    fi
+    SHEBANG_ERRORS+=("$msg")
+    rm -f "$errfile" 2> /dev/null || true
     return 1
-  fi
-
-  tmp="${EXEC_DIR%/}/shebang_test.$$.$RANDOM"
-  errfile="${EXEC_DIR%/}/shebang_probe_err.$$"
-  {
-    printf '#!%s\n' "$candidate"
-    printf '%s\n' "$probe_script_content"
-  } >"$tmp"
-  chmod 700 "$tmp" 2>/dev/null || true
-
-  set +e
-  out="$("$tmp" 2>"$errfile")"
-  rc=$?
-  set -e
-
-  rm -f "$tmp" 2>/dev/null || true
-
-  if [ "$rc" -eq 0 ] && [ -n "${out:-}" ] && [ "$out" != "null" ]; then
-    rm -f "$errfile" 2>/dev/null || true
-    return 0
-  fi
-
-  msg=$' - FAIL: #!'"$candidate"$'\n'"   rc=$rc, stdout='${out:-}'"$'\n'
-  if [ -s "$errfile" ]; then
-    msg+=$'   stderr:\n'
-    msg+="$(sed -n '1,8p' "$errfile")"$'\n'
-  else
-    msg+=$'   stderr: <empty>\n'
-  fi
-  SHEBANG_ERRORS+=("$msg")
-  rm -f "$errfile" 2>/dev/null || true
-  return 1
 }
 
 shebang=""
 for candidate in "${candidate_shebangs[@]}"; do
-  if validate_shebang "$candidate"; then
-    shebang="$candidate"
-    break
-  fi
+    if validate_shebang "$candidate"; then
+        shebang="$candidate"
+        break
+    fi
 done
 
 if [ -z "$shebang" ]; then
-  echo "ERROR: No valid shebang found (unable to execute bashio::addon.version via candidates)." >&2
-  echo "Tried:" >&2
-  printf ' - %s\n' "${candidate_shebangs[@]}" >&2
-  if [ "${#SHEBANG_ERRORS[@]}" -gt 0 ]; then
-    echo "Probe failures:" >&2
-    printf '%s\n' "${SHEBANG_ERRORS[@]}" >&2
-  fi
-  exit 1
+    echo "ERROR: No valid shebang found (unable to execute bashio::addon.version via candidates)." >&2
+    echo "Tried:" >&2
+    printf ' - %s\n' "${candidate_shebangs[@]}" >&2
+    if [ "${#SHEBANG_ERRORS[@]}" -gt 0 ]; then
+        echo "Probe failures:" >&2
+        printf '%s\n' "${SHEBANG_ERRORS[@]}" >&2
+    fi
+    exit 1
 fi
 
 #####################################
@@ -197,28 +203,28 @@ S6_CONTAINER_ENV="/run/s6/container_environment"
 # Only when this script is PID 1 -- under /init it is the stage-2 hook and stage 1 has already
 # written the directory -- and only where with-contenv exists to care.
 if $PID1 && { [ -x /command/with-contenv ] || [ -x /usr/bin/with-contenv ]; }; then
-  # Filled in a sibling and renamed into place, never written to live. A half-populated envdir is
-  # worse than an absent one: s6-envdir accepts it, so a with-contenv script starts and runs
-  # against an environment quietly missing SUPERVISOR_TOKEN, where an absent one stops it at its
-  # shebang. rename(2) means a concurrent reader -- a HEALTHCHECK can run alongside PID 1 -- sees
-  # the directory either absent or complete, never mid-dump.
-  #
-  # Cleared rather than written over: /run is not a tmpfs here, so an image layer can persist
-  # entries, and writing name by name would merge into them and leave variables PID 1 does not
-  # have, a stale SUPERVISOR_TOKEN among them. A failed rm has to abort the chain, because mkdir -p
-  # accepts a surviving symlink-to-directory and would let the dump follow it. rm does not traverse
-  # a symlink, but it would empty anything bind-mounted at this exact path -- not a configuration
-  # any add-on uses, and not one s6 would tolerate either.
-  if rm -rf "$S6_CONTAINER_ENV" "$S6_CONTAINER_ENV.tmp" && mkdir -p "$S6_CONTAINER_ENV.tmp" &&
-    s6-dumpenv -- "$S6_CONTAINER_ENV.tmp" && mv "$S6_CONTAINER_ENV.tmp" "$S6_CONTAINER_ENV"; then
-    echo "Populated $S6_CONTAINER_ENV for with-contenv"
-  else
-    # Leaves the directory absent, which is exactly how this fails today -- so the failure mode is
-    # unchanged, not newly degraded. Never fatal, a read-only /run must still let the add-on boot,
-    # but never silent either, since the shebang failure it leaves behind says nothing on its own.
-    rm -rf "$S6_CONTAINER_ENV" "$S6_CONTAINER_ENV.tmp" 2>/dev/null || true
-    echo -e "\e[38;5;214m$(date) WARNING: could not populate $S6_CONTAINER_ENV; scripts with a with-contenv shebang will fail at their shebang, as they did before this was attempted\e[0m"
-  fi
+    # Filled in a sibling and renamed into place, never written to live. A half-populated envdir is
+    # worse than an absent one: s6-envdir accepts it, so a with-contenv script starts and runs
+    # against an environment quietly missing SUPERVISOR_TOKEN, where an absent one stops it at its
+    # shebang. rename(2) means a concurrent reader -- a HEALTHCHECK can run alongside PID 1 -- sees
+    # the directory either absent or complete, never mid-dump.
+    #
+    # Cleared rather than written over: /run is not a tmpfs here, so an image layer can persist
+    # entries, and writing name by name would merge into them and leave variables PID 1 does not
+    # have, a stale SUPERVISOR_TOKEN among them. A failed rm has to abort the chain, because mkdir -p
+    # accepts a surviving symlink-to-directory and would let the dump follow it. rm does not traverse
+    # a symlink, but it would empty anything bind-mounted at this exact path -- not a configuration
+    # any add-on uses, and not one s6 would tolerate either.
+    if rm -rf "$S6_CONTAINER_ENV" "$S6_CONTAINER_ENV.tmp" && mkdir -p "$S6_CONTAINER_ENV.tmp" \
+        && s6-dumpenv -- "$S6_CONTAINER_ENV.tmp" && mv "$S6_CONTAINER_ENV.tmp" "$S6_CONTAINER_ENV"; then
+        echo "Populated $S6_CONTAINER_ENV for with-contenv"
+    else
+        # Leaves the directory absent, which is exactly how this fails today -- so the failure mode is
+        # unchanged, not newly degraded. Never fatal, a read-only /run must still let the add-on boot,
+        # but never silent either, since the shebang failure it leaves behind says nothing on its own.
+        rm -rf "$S6_CONTAINER_ENV" "$S6_CONTAINER_ENV.tmp" 2> /dev/null || true
+        echo -e "\e[38;5;214m$(date) WARNING: could not populate $S6_CONTAINER_ENV; scripts with a with-contenv shebang will fail at their shebang, as they did before this was attempted\e[0m"
+    fi
 fi
 
 ####################################
@@ -228,21 +234,21 @@ fi
 BASHIO_LIB=""
 BASHIO_LIB_FULL=false
 for f in /usr/lib/bashio/bashio.sh /usr/lib/bashio/lib.sh /usr/src/bashio/bashio.sh /usr/local/lib/bashio/bashio.sh; do
-  if [ -f "$f" ]; then
-    BASHIO_LIB="$f"
-    # The real library, which talks to the Supervisor. The standalone shim below only reads
-    # environment variables, which matters to wait_for_supervisor().
-    BASHIO_LIB_FULL=true
-    break
-  fi
+    if [ -f "$f" ]; then
+        BASHIO_LIB="$f"
+        # The real library, which talks to the Supervisor. The standalone shim below only reads
+        # environment variables, which matters to wait_for_supervisor().
+        BASHIO_LIB_FULL=true
+        break
+    fi
 done
 if [ -z "$BASHIO_LIB" ]; then
-  for f in /usr/local/lib/bashio-standalone.sh /.bashio-standalone.sh; do
-    if [ -f "$f" ]; then
-      BASHIO_LIB="$f"
-      break
-    fi
-  done
+    for f in /usr/local/lib/bashio-standalone.sh /.bashio-standalone.sh; do
+        if [ -f "$f" ]; then
+            BASHIO_LIB="$f"
+            break
+        fi
+    done
 fi
 
 ##############################
@@ -268,56 +274,56 @@ fi
 # skips the wait. When the Supervisor is already up -- the normal case -- this costs one request.
 
 wait_for_supervisor() {
-  local max="${HA_SUPERVISOR_WAIT:-30}"
-  local started deadline remaining attempt announced=0
+    local max="${HA_SUPERVISOR_WAIT:-30}"
+    local started deadline remaining attempt announced=0
 
-  # Nothing to wait for without a token. The standalone shim is excluded too: it answers these
-  # calls from environment variables and never contacts the Supervisor, so it can never satisfy
-  # the probe and would burn the whole ceiling on every boot.
-  [ -n "${SUPERVISOR_TOKEN:-}" ] || return 0
-  [ "${BASHIO_LIB_FULL:-false}" = "true" ] || return 0
-  # bashio's own curl carries no --max-time, so each attempt is bounded from the outside.
-  command -v timeout >/dev/null 2>&1 || return 0
-  # Digits only, then forced to base 10: `test -gt` accepts a zero-padded override like 08, but
-  # arithmetic expansion reads it as octal and fails, which would leave the deadline empty and
-  # spin the loop below forever.
-  case "$max" in '' | *[!0-9]*) return 0 ;; esac
-  max=$((10#$max))
-  [ "$max" -gt 0 ] || return 0
+    # Nothing to wait for without a token. The standalone shim is excluded too: it answers these
+    # calls from environment variables and never contacts the Supervisor, so it can never satisfy
+    # the probe and would burn the whole ceiling on every boot.
+    [ -n "${SUPERVISOR_TOKEN:-}" ] || return 0
+    [ "${BASHIO_LIB_FULL:-false}" = "true" ] || return 0
+    # bashio's own curl carries no --max-time, so each attempt is bounded from the outside.
+    command -v timeout > /dev/null 2>&1 || return 0
+    # Digits only, then forced to base 10: `test -gt` accepts a zero-padded override like 08, but
+    # arithmetic expansion reads it as octal and fails, which would leave the deadline empty and
+    # spin the loop below forever.
+    case "$max" in '' | *[!0-9]*) return 0 ;; esac
+    max=$((10#$max))
+    [ "$max" -gt 0 ] || return 0
 
-  started=$SECONDS
-  deadline=$((started + max))
+    started=$SECONDS
+    deadline=$((started + max))
 
-  while :; do
-    remaining=$((deadline - SECONDS))
-    if [ "$remaining" -le 0 ]; then
-      echo -e "\e[38;5;214m$(date) WARNING: Supervisor API did not report this add-on's network details within ${max}s, continuing anyway\e[0m"
-      return 0
-    fi
+    while :; do
+        remaining=$((deadline - SECONDS))
+        if [ "$remaining" -le 0 ]; then
+            echo -e "\e[38;5;214m$(date) WARNING: Supervisor API did not report this add-on's network details within ${max}s, continuing anyway\e[0m"
+            return 0
+        fi
 
-    # No single attempt may outlive the ceiling it is bounded by.
-    attempt=5
-    [ "$remaining" -lt "$attempt" ] && attempt="$remaining"
+        # No single attempt may outlive the ceiling it is bounded by.
+        attempt=5
+        [ "$remaining" -lt "$attempt" ] && attempt="$remaining"
 
-    # One call is enough to settle all of them: bashio fetches the whole /addons/self/info object
-    # and caches it, so a populated ip_address means ingress_port and the rest are cached too.
-    # Run in a child shell so bashio's globals and traps stay out of the entrypoint; its own error
-    # logging is dropped because a failed attempt here is expected, not news.
-    # shellcheck disable=SC2016
-    if timeout "$attempt" bash -c '. "$1" && [ -n "$(bashio::addon.ip_address)" ]' \
-      _ "$BASHIO_LIB" >/dev/null 2>&1; then
-      [ "$announced" -eq 0 ] || echo "Supervisor API ready after $((SECONDS - started))s"
-      return 0
-    fi
+        # One call is enough to settle all of them: bashio fetches the whole /addons/self/info object
+        # and caches it, so a populated ip_address means ingress_port and the rest are cached too.
+        # Run in a child shell so bashio's globals and traps stay out of the entrypoint; its own error
+        # logging is dropped because a failed attempt here is expected, not news.
+        # shellcheck disable=SC2016
+        if timeout "$attempt" bash -c '. "$1" && [ -n "$(bashio::addon.ip_address)" ]' \
+            _ "$BASHIO_LIB" > /dev/null 2>&1; then
+            [ "$announced" -eq 0 ] || echo "Supervisor API ready after $((SECONDS - started))s"
+            return 0
+        fi
 
-    if [ "$announced" -eq 0 ]; then
-      echo "Waiting for the Supervisor API to report this add-on's network details..."
-      announced=1
-    fi
+        if [ "$announced" -eq 0 ]; then
+            echo "Waiting for the Supervisor API to report this add-on's network details..."
+            announced=1
+        fi
 
-    # Skipped when the attempt already consumed what was left, so the sleep cannot overshoot.
-    [ "$((deadline - SECONDS))" -gt 0 ] && sleep 1
-  done
+        # Skipped when the attempt already consumed what was left, so the sleep cannot overshoot.
+        [ "$((deadline - SECONDS))" -gt 0 ] && sleep 1
+    done
 }
 
 wait_for_supervisor
@@ -327,97 +333,97 @@ wait_for_supervisor
 ####################
 
 run_one_script() {
-  local script="$1"
+    local script="$1"
 
-  echo "$script: executing"
+    echo "$script: executing"
 
-  if [ "$(id -u)" -eq 0 ]; then
-    chown "$(id -u)":"$(id -g)" "$script" || true
-    chmod a+x "$script" || true
-  else
-    echo -e "\e[38;5;214m$(date) WARNING: Script executed with user $(id -u):$(id -g), things can break and chown won't work\e[0m"
-    sed -i "s/^[[:space:]]*chown /true # chown /g" "$script"
-    sed -i "s/^[[:space:]]*chmod /true # chmod /g" "$script"
-  fi
-
-  sed -i "1s|^.*|#!$shebang|" "$script"
-  chmod +x "$script"
-
-  if [ "${ha_entry_source:-null}" = "true" ]; then
-    sed -i -E 's/^[[:space:]]*exit ([0-9]+)/return \1 \|\| exit \1/g' "$script"
-    sed -i 's/bashio::exit\.nok/return 1/g' "$script"
-    sed -i 's/bashio::exit\.ok/return 0/g' "$script"
-    # shellcheck disable=SC1090
-    source "$script" || echo -e "\033[0;31mError\033[0m : $script exiting $?"
-  else
-    _run_rc=0
-    "$script" || _run_rc=$?
-    if [ "$_run_rc" -eq 126 ] && [ -n "${BASHIO_LIB:-}" ]; then
-      echo "Direct exec failed (rc=126, likely E2BIG), retrying via source in subshell..."
-      _run_rc=0
-      (
-        # shellcheck disable=SC1090
-        . "$BASHIO_LIB" 2>/dev/null || true
-        # shellcheck disable=SC1090
-        . "$script"
-      ) || _run_rc=$?
-      if [ "$_run_rc" -ne 0 ]; then
-        echo -e "\033[0;31mError\033[0m : $script exiting $_run_rc"
-      fi
-    elif [ "$_run_rc" -ne 0 ]; then
-      echo -e "\033[0;31mError\033[0m : $script exiting $_run_rc"
+    if [ "$(id -u)" -eq 0 ]; then
+        chown "$(id -u)":"$(id -g)" "$script" || true
+        chmod a+x "$script" || true
+    else
+        echo -e "\e[38;5;214m$(date) WARNING: Script executed with user $(id -u):$(id -g), things can break and chown won't work\e[0m"
+        sed -i "s/^[[:space:]]*chown /true # chown /g" "$script"
+        sed -i "s/^[[:space:]]*chmod /true # chmod /g" "$script"
     fi
-  fi
 
-  sed -i '1a exit 0' "$script"
+    sed -i "1s|^.*|#!$shebang|" "$script"
+    chmod +x "$script"
+
+    if [ "${ha_entry_source:-null}" = "true" ]; then
+        sed -i -E 's/^[[:space:]]*exit ([0-9]+)/return \1 \|\| exit \1/g' "$script"
+        sed -i 's/bashio::exit\.nok/return 1/g' "$script"
+        sed -i 's/bashio::exit\.ok/return 0/g' "$script"
+        # shellcheck disable=SC1090
+        source "$script" || echo -e "\033[0;31mError\033[0m : $script exiting $?"
+    else
+        _run_rc=0
+        "$script" || _run_rc=$?
+        if [ "$_run_rc" -eq 126 ] && [ -n "${BASHIO_LIB:-}" ]; then
+            echo "Direct exec failed (rc=126, likely E2BIG), retrying via source in subshell..."
+            _run_rc=0
+            (
+                # shellcheck disable=SC1090
+                . "$BASHIO_LIB" 2> /dev/null || true
+                # shellcheck disable=SC1090
+                . "$script"
+            ) || _run_rc=$?
+            if [ "$_run_rc" -ne 0 ]; then
+                echo -e "\033[0;31mError\033[0m : $script exiting $_run_rc"
+            fi
+        elif [ "$_run_rc" -ne 0 ]; then
+            echo -e "\033[0;31mError\033[0m : $script exiting $_run_rc"
+        fi
+    fi
+
+    sed -i '1a exit 0' "$script"
 }
 
 if [ -d /etc/cont-init.d ]; then
-  for SCRIPTS in /etc/cont-init.d/*; do
-    [ -e "$SCRIPTS" ] || continue
-    run_one_script "$SCRIPTS"
-  done
+    for SCRIPTS in /etc/cont-init.d/*; do
+        [ -e "$SCRIPTS" ] || continue
+        run_one_script "$SCRIPTS"
+    done
 fi
 
 if $PID1; then
-  shopt -s nullglob
-  for runfile in /etc/services.d/*/run /etc/s6-overlay/s6-rc.d/*/run; do
-    [ -f "$runfile" ] || continue
-    echo "Starting: $runfile"
-    sed -i "1s|^.*|#!$shebang|" "$runfile"
-    chmod +x "$runfile"
-    (
-      restart_count=0
-      max_restarts=5
-      while true; do
-        _svc_rc=0
-        "$runfile" || _svc_rc=$?
-        if [ "$_svc_rc" -eq 126 ] && [ -n "${BASHIO_LIB:-}" ]; then
-          echo "Direct exec of $runfile failed (rc=126, likely E2BIG), retrying via source..."
-          _svc_rc=0
-          (
-            # shellcheck disable=SC1090
-            . "$BASHIO_LIB" 2>/dev/null || true
-            # shellcheck disable=SC1090
-            . "$runfile"
-          ) || _svc_rc=$?
-        fi
-        rc=$_svc_rc
-        if [ "$rc" -eq 0 ]; then
-          echo "$runfile exited cleanly (exit 0), not restarting."
-          break
-        fi
-        restart_count=$((restart_count + 1))
-        if [ "$restart_count" -ge "$max_restarts" ]; then
-          echo -e "\033[0;31mERROR: $runfile has crashed $restart_count times (last exit code: $rc), giving up.\033[0m"
-          break
-        fi
-        echo -e "\e[38;5;214m$(date) WARNING: $runfile exited (code $rc), restarting (#${restart_count}/${max_restarts}) in 5s...\e[0m"
-        sleep 5
-      done
-    ) &
-  done
-  shopt -u nullglob
+    shopt -s nullglob
+    for runfile in /etc/services.d/*/run /etc/s6-overlay/s6-rc.d/*/run; do
+        [ -f "$runfile" ] || continue
+        echo "Starting: $runfile"
+        sed -i "1s|^.*|#!$shebang|" "$runfile"
+        chmod +x "$runfile"
+        (
+            restart_count=0
+            max_restarts=5
+            while true; do
+                _svc_rc=0
+                "$runfile" || _svc_rc=$?
+                if [ "$_svc_rc" -eq 126 ] && [ -n "${BASHIO_LIB:-}" ]; then
+                    echo "Direct exec of $runfile failed (rc=126, likely E2BIG), retrying via source..."
+                    _svc_rc=0
+                    (
+                        # shellcheck disable=SC1090
+                        . "$BASHIO_LIB" 2> /dev/null || true
+                        # shellcheck disable=SC1090
+                        . "$runfile"
+                    ) || _svc_rc=$?
+                fi
+                rc=$_svc_rc
+                if [ "$rc" -eq 0 ]; then
+                    echo "$runfile exited cleanly (exit 0), not restarting."
+                    break
+                fi
+                restart_count=$((restart_count + 1))
+                if [ "$restart_count" -ge "$max_restarts" ]; then
+                    echo -e "\033[0;31mERROR: $runfile has crashed $restart_count times (last exit code: $rc), giving up.\033[0m"
+                    break
+                fi
+                echo -e "\e[38;5;214m$(date) WARNING: $runfile exited (code $rc), restarting (#${restart_count}/${max_restarts}) in 5s...\e[0m"
+                sleep 5
+            done
+        ) &
+    done
+    shopt -u nullglob
 fi
 
 ######################
@@ -425,43 +431,43 @@ fi
 ######################
 
 if $PID1; then
-  echo " "
-  echo -e "\033[0;32mEverything started!\033[0m"
+    echo " "
+    echo -e "\033[0;32mEverything started!\033[0m"
 
-  terminate() {
-    local local_pid
-    echo "Termination signal received, forwarding to subprocesses..."
-    if command -v pgrep >/dev/null 2>&1; then
-      while read -r pid; do
-        [ -n "$pid" ] || continue
-        echo "Terminating child PID $pid"
-        kill -TERM "$pid" 2>/dev/null || echo "Failed to terminate PID $pid"
-      done < <(pgrep -P "$$" || true)
-    else
-      for p in /proc/[0-9]*/; do
-        local_pid="${p#/proc/}"
-        local_pid="${local_pid%/}"
-        if [ "$local_pid" -ne 1 ] && grep -q "^PPid:[[:space:]]*$$" "/proc/$local_pid/status" 2>/dev/null; then
-          echo "Terminating child PID $local_pid"
-          kill -TERM "$local_pid" 2>/dev/null || echo "Failed to terminate PID $local_pid"
+    terminate() {
+        local local_pid
+        echo "Termination signal received, forwarding to subprocesses..."
+        if command -v pgrep > /dev/null 2>&1; then
+            while read -r pid; do
+                [ -n "$pid" ] || continue
+                echo "Terminating child PID $pid"
+                kill -TERM "$pid" 2> /dev/null || echo "Failed to terminate PID $pid"
+            done < <(pgrep -P "$$" || true)
+        else
+            for p in /proc/[0-9]*/; do
+                local_pid="${p#/proc/}"
+                local_pid="${local_pid%/}"
+                if [ "$local_pid" -ne 1 ] && grep -q "^PPid:[[:space:]]*$$" "/proc/$local_pid/status" 2> /dev/null; then
+                    echo "Terminating child PID $local_pid"
+                    kill -TERM "$local_pid" 2> /dev/null || echo "Failed to terminate PID $local_pid"
+                fi
+            done
         fi
-      done
-    fi
-    wait || true
-    echo "All subprocesses terminated. Exiting."
-    exit 0
-  }
+        wait || true
+        echo "All subprocesses terminated. Exiting."
+        exit 0
+    }
 
-  trap terminate SIGTERM SIGINT
-  while :; do
-    sleep infinity &
-    wait $!
-  done
+    trap terminate SIGTERM SIGINT
+    while :; do
+        sleep infinity &
+        wait $!
+    done
 else
-  echo " "
-  echo -e "\033[0;32mStarting the upstream container\033[0m"
-  echo " "
-  if [ -f /docker-mods ]; then
-    exec /docker-mods
-  fi
+    echo " "
+    echo -e "\033[0;32mStarting the upstream container\033[0m"
+    echo " "
+    if [ -f /docker-mods ]; then
+        exec /docker-mods
+    fi
 fi

CLAUDE.md

@@ -147,7 +147,7 @@ manual actions with precedence. Prompts live in `.github/prompts/`, shared shell
 in `.github/scripts/`.
 
 | Workflow | Model | Trigger | Role |
-|---|---|---|---|
+| --- | --- | --- | --- |
 | `on_issues_ai_triage.yaml` | Sonnet-low | issue opened (+ author reply, daily catch-up) | Tier 1: classify, dedupe, answer, ask for info; label `ai-triage` for real add-on bugs |
 | `daily_ai_fix.yaml` | Opus 5-xhigh | daily 03:00 | Tier 2: diagnose the `ai-triage` batch; small+confident → ready PR (`ai:fixed`); else write a plan (`ai:plan-pending`) |
 | `on_issue_approved.yaml` | Opus 5-high | maintainer adds `ai:approved` | Tier 3: execute the approved plan → ready PR |
@@ -176,7 +176,7 @@ prompt-only, not machine-enforced.
 ## Linting Rules
 
 | Tool | Config | Key ignores |
-|------|--------|------------|
+| ------ | -------- | ------------ |
 | Hadolint | `.hadolint.yaml` | DL3002, DL3006-9, DL3018 (no pinning required) |
 | ShellCheck | `.shellcheckrc` | SC2002 |
 | Markdownlint | `.markdownlint.yaml` | MD013 (line length), MD025, MD033, MD041 |

addons_updater/README.md

@@ -75,7 +75,7 @@ You can add the following tags in the file :
 
 ### Addon version numbering
 
-The `version` written in the addon `config.yaml` is the one Home Assistant compares to decide whether an update is available. Home Assistant hides the update when it can order both versions and the new one is not strictly newer (`1.2.3` -> `1.2.3-2` is a semver pre-release, so it is *older*), and it cannot order tags such as `version-bf9e0b4f` or `ubuntu-2026-06-01` at all.
+The `version` written in the addon `config.yaml` is the one Home Assistant compares to decide whether an update is available. Home Assistant hides the update when it can order both versions and the new one is not strictly newer (`1.2.3` -> `1.2.3-2` is a semver pre-release, so it is _older_), and it cannot order tags such as `version-bf9e0b4f` or `ubuntu-2026-06-01` at all.
 
 The addon version is therefore derived from the upstream tag:
 

aurral/CHANGELOG.md

@@ -1,31 +1,31 @@
- 
+
 ## 2.8.0 (2026-09-05)
 - Update to latest version from lklynet/aurral (changelog : https://github.com/lklynet/aurral/releases)
- 
+
 ## 2.7.0 (2026-08-29)
 - Update to latest version from lklynet/aurral (changelog : https://github.com/lklynet/aurral/releases)
- 
+
 ## 2.5.1 (2026-08-22)
 - Update to latest version from lklynet/aurral (changelog : https://github.com/lklynet/aurral/releases)
- 
+
 ## 2.4.0 (2026-08-13)
 - Update to latest version from lklynet/aurral (changelog : https://github.com/lklynet/aurral/releases)
- 
+
 ## 2.1.0 (2026-08-08)
 - Update to latest version from lklynet/aurral (changelog : https://github.com/lklynet/aurral/releases)
- 
+
 ## 2.0.3 (2026-08-01)
 - Update to latest version from lklynet/aurral (changelog : https://github.com/lklynet/aurral/releases)
- 
+
 ## 2.0.2 (2026-08-01)
 - Update to latest version from lklynet/aurral (changelog : https://github.com/lklynet/aurral/releases)
- 
+
 ## 2.0.0 (2026-07-22)
 - Update to latest version from lklynet/aurral (changelog : https://github.com/lklynet/aurral/releases)
- 
+
 ## 1.76.52 (2026-07-11)
 - Update to latest version from lklynet/aurral (changelog : https://github.com/lklynet/aurral/releases)
- 
+
 ## 1.76.51 (2026-06-17)
 - Update to latest version from lklynet/aurral (changelog : https://github.com/lklynet/aurral/releases)
 ## 1.76.49 (2026-06-05)

aurral/README.md

@@ -6,7 +6,7 @@ This addon is based on the docker image <https://github.com/lklynet/aurral>
 ## Configuration
 
 | Option | Default | Description |
-|---|---|---|
+| --- | --- | --- |
 | `download_folder` | `/share/aurral/downloads` | Path where Aurral writes flow downloads. Must be under `/share`. |
 | `weekly_flow_folder` | `weekly-flow` | Subfolder name appended to `download_folder` for weekly flow files. The full path will be `download_folder/weekly_flow_folder`. |
 

autobrr/CHANGELOG.md

@@ -1,16 +1,16 @@
- 
+
 ## 1.85.0 (2026-08-29)
 - Update to latest version from autobrr/autobrr (changelog : https://github.com/autobrr/autobrr/releases)
- 
+
 ## 1.84.0 (2026-08-15)
 - Update to latest version from autobrr/autobrr (changelog : https://github.com/autobrr/autobrr/releases)
- 
+
 ## 1.83.0 (2026-08-01)
 - Update to latest version from autobrr/autobrr (changelog : https://github.com/autobrr/autobrr/releases)
- 
+
 ## 1.82.1 (2026-07-16)
 - Update to latest version from autobrr/autobrr (changelog : https://github.com/autobrr/autobrr/releases)
- 
+
 ## 1.81.0 (2026-07-04)
 - Update to latest version from autobrr/autobrr (changelog : https://github.com/autobrr/autobrr/releases)
 ## 1.80.0 (2026-06-05)

autobrr/README.md

@@ -67,7 +67,7 @@ Default credentials: `admin` / `password` (change after first login).
 ### Options
 
 | Option | Type | Default | Description |
-|--------|------|---------|-------------|
+| -------- | ------ | --------- | ------------- |
 | `PGID` | int | `0` | Group ID for file permissions |
 | `PUID` | int | `0` | User ID for file permissions |
 | `TZ` | str | | Timezone (e.g., `Europe/London`) |

bazarr/README.md

@@ -44,7 +44,7 @@ Configurations can be done through the app webUI, except for the following optio
 ### Options
 
 | Option | Type | Default | Description |
-|--------|------|---------|-------------|
+| -------- | ------ | --------- | ------------- |
 | `PGID` | int | `0` | Group ID for file permissions |
 | `PUID` | int | `0` | User ID for file permissions |
 | `TZ` | str | | Timezone (e.g., `Europe/London`) |

bentopdf/README.md

@@ -17,7 +17,7 @@ A privacy-first PDF toolkit running entirely in your browser — no uploads, no
 ### Organize & Edit
 
 | Tool | Tool | Tool |
-|------|------|------|
+| ------ | ------ | ------ |
 | Merge PDF | Split PDF | Organize PDF |
 | Delete Pages | Extract Pages | Reverse Pages |
 | Rotate PDF | Rotate Custom | Crop PDF |
@@ -28,7 +28,7 @@ A privacy-first PDF toolkit running entirely in your browser — no uploads, no
 ### Convert TO PDF
 
 | Tool | Tool | Tool |
-|------|------|------|
+| ------ | ------ | ------ |
 | Word to PDF | Excel to PDF | PowerPoint to PDF |
 | Image to PDF | JPG to PDF | PNG to PDF |
 | BMP to PDF | TIFF to PDF | WEBP to PDF |
@@ -44,7 +44,7 @@ A privacy-first PDF toolkit running entirely in your browser — no uploads, no
 ### Convert FROM PDF
 
 | Tool | Tool | Tool |
-|------|------|------|
+| ------ | ------ | ------ |
 | PDF to DOCX | PDF to Excel | PDF to JPG |
 | PDF to PNG | PDF to BMP | PDF to TIFF |
 | PDF to WEBP | PDF to SVG | PDF to Text |
@@ -54,7 +54,7 @@ A privacy-first PDF toolkit running entirely in your browser — no uploads, no
 ### Security & Metadata
 
 | Tool | Tool | Tool |
-|------|------|------|
+| ------ | ------ | ------ |
 | Encrypt PDF | Decrypt PDF | Change Permissions |
 | Remove Restrictions | Sign PDF | Digital Sign PDF |
 | Validate Signature | Edit Metadata | View Metadata |
@@ -64,7 +64,7 @@ A privacy-first PDF toolkit running entirely in your browser — no uploads, no
 ### Enhance & Process
 
 | Tool | Tool | Tool |
-|------|------|------|
+| ------ | ------ | ------ |
 | Compress PDF | OCR PDF | Deskew PDF |
 | Rasterize PDF | Linearize PDF | PDF to PDF/A |
 | Adjust Colors | Invert Colors | Text Color |
@@ -76,7 +76,7 @@ A privacy-first PDF toolkit running entirely in your browser — no uploads, no
 ### Forms & More
 
 | Tool | Tool | Tool |
-|------|------|------|
+| ------ | ------ | ------ |
 | Form Creator | Form Filler | Table of Contents |
 | Bookmark | PDF Editor | Extract Images |
 | Extract Tables | Extract Attachments | Edit Attachments |

birdnet-go-dev/rootfs/etc/cont-init.d/01-structure.sh

@@ -43,8 +43,8 @@ if [ ! -f "$CONFIG_LOCATION" ]; then
     # config. (We can't remove the file and continue — subsequent yq calls
     # under set -e would abort the init script.)
     if ! curl -fL -s -S \
-            https://raw.githubusercontent.com/tphakala/birdnet-go/refs/heads/main/internal/conf/config.yaml \
-            -o "$CONFIG_LOCATION"; then
+        https://raw.githubusercontent.com/tphakala/birdnet-go/refs/heads/main/internal/conf/config.yaml \
+        -o "$CONFIG_LOCATION"; then
         bashio::log.warning "Could not download default config.yaml; seeding an empty document so addon defaults can populate it"
         echo '{}' > "$CONFIG_LOCATION"
     fi
@@ -190,5 +190,5 @@ LOG_DIR="/config/logs"
 if [ -d "$LOG_DIR" ]; then
     bashio::log.info "Trimming log files older than ${LOG_MAX_AGE_DAYS} days in ${LOG_DIR}"
     ln -sf "$LOG_DIR" /logs
-    find "$LOG_DIR" -type f -name "*.log*" -mtime +"$LOG_MAX_AGE_DAYS" -delete 2>/dev/null || true
+    find "$LOG_DIR" -type f -name "*.log*" -mtime +"$LOG_MAX_AGE_DAYS" -delete 2> /dev/null || true
 fi

birdnet-go-dev/rootfs/etc/cont-init.d/33-mariadb.sh

@@ -44,8 +44,8 @@ if ! bashio::config.true 'mariadb_auto_config'; then
         # Only revert if config.yaml points at the HA MariaDB host we would have
         # written — a mysql block pointing at a different host was set manually.
         # shellcheck disable=SC2016
-        CURRENT_MYSQL_HOST="$(yq -r '.output.mysql.host // empty' "$CONFIG_LOCATION" 2>/dev/null || true)"
-        if yq -e '.output.mysql.enabled == true' "$CONFIG_LOCATION" >/dev/null 2>&1 \
+        CURRENT_MYSQL_HOST="$(yq -r '.output.mysql.host // empty' "$CONFIG_LOCATION" 2> /dev/null || true)"
+        if yq -e '.output.mysql.enabled == true' "$CONFIG_LOCATION" > /dev/null 2>&1 \
             && [ "${CURRENT_MYSQL_HOST}" = "${MYSQL_HOST}" ]; then
             yq -i -y \
                 '.output.mysql.enabled = false
@@ -71,7 +71,7 @@ bashio::log.green "---"
 # Resolve MariaDB hostname to IPv4: on HAOS >=17.3 the Supervisor network
 # gained IPv6, but the MariaDB addon only grants its user from the IPv4
 # subnet. Fall back to the raw hostname if resolution fails.
-MYSQL_HOST_RESOLVED="$(getent ahostsv4 "${MYSQL_HOST}" 2>/dev/null | awk '{print $1; exit}')"
+MYSQL_HOST_RESOLVED="$(getent ahostsv4 "${MYSQL_HOST}" 2> /dev/null | awk '{print $1; exit}')"
 MYSQL_HOST_RESOLVED="${MYSQL_HOST_RESOLVED:-${MYSQL_HOST}}"
 if [ "${MYSQL_HOST_RESOLVED}" != "${MYSQL_HOST}" ]; then
     bashio::log.blue "Resolved ${MYSQL_HOST} -> ${MYSQL_HOST_RESOLVED} (forcing IPv4)"

birdnet-go/CHANGELOG.md

@@ -1,4 +1,4 @@
- 
+
 ## 20260827 (2026-08-29)
 - Update to latest version from tphakala/birdnet-go (changelog : https://github.com/tphakala/birdnet-go/releases)
 - Upstream tag : 20260823
@@ -6,13 +6,13 @@
 - Minor bugs fixed
 ## 20260716.1 (26-08-2026)
 - Minor bugs fixed
- 
+
 ## 20260716.1 (2026-08-26)
 - Rebuild after syncing the alexbelgium/birdnet-go fork with upstream tphakala/birdnet-go and resolving conflicts on all open pull requests
 
 ## 20260716 (2026-07-16)
 - Update to latest version from tphakala/birdnet-go (changelog : https://github.com/tphakala/birdnet-go/releases)
- 
+
 ## 20260712 (2026-07-13)
 - Update to latest version from tphakala/birdnet-go (changelog : https://github.com/tphakala/birdnet-go/releases)
 ## nightly-20260615-4 (09-07-2026)
@@ -22,8 +22,8 @@
 
 ## nightly-20260615-2 (05-07-2026)
 - Minor bugs fixed
- - Fix detections/database not persisting across restarts on a fresh install: upstream's default `config.yaml` ships `output.sqlite.path: birdnet.db` (relative) explicitly, so the missing-only (`//=`) seeding introduced previously never rewrote it to an absolute path. A relative path resolves against the app's ephemeral working directory, so the database was silently recreated empty on every restart. Any relative `output.sqlite.path` is now rewritten to live under the persistent `/config` on startup; values already set to an absolute path are left untouched. (https://github.com/tphakala/birdnet-go/discussions/3774)
- - MQTT auto-config now also enables BirdNET-Go's native Home Assistant MQTT auto-discovery: detection sensors appear in Home Assistant automatically with no manual YAML (existing UI/config.yaml edits are preserved)
+- Fix detections/database not persisting across restarts on a fresh install: upstream's default `config.yaml` ships `output.sqlite.path: birdnet.db` (relative) explicitly, so the missing-only (`//=`) seeding introduced previously never rewrote it to an absolute path. A relative path resolves against the app's ephemeral working directory, so the database was silently recreated empty on every restart. Any relative `output.sqlite.path` is now rewritten to live under the persistent `/config` on startup; values already set to an absolute path are left untouched. (https://github.com/tphakala/birdnet-go/discussions/3774)
+- MQTT auto-config now also enables BirdNET-Go's native Home Assistant MQTT auto-discovery: detection sensors appear in Home Assistant automatically with no manual YAML (existing UI/config.yaml edits are preserved)
 - MQTT auto-config seeds `realtime.mqtt.retain: true` (only when unset) so sensor states survive Home Assistant restarts
 - Added supervisor watchdog (tcp://[HOST]:[PORT:8080]) so the add-on is automatically restarted if BirdNET-Go stops responding
 - Added backup_exclude for rotated logs, making Home Assistant backups smaller (SQLite journals are kept so hot backups stay consistent)

birdnet-go/rootfs/etc/cont-init.d/01-structure.sh

@@ -43,8 +43,8 @@ if [ ! -f "$CONFIG_LOCATION" ]; then
     # config. (We can't remove the file and continue — subsequent yq calls
     # under set -e would abort the init script.)
     if ! curl -fL -s -S \
-            https://raw.githubusercontent.com/tphakala/birdnet-go/refs/heads/main/internal/conf/config.yaml \
-            -o "$CONFIG_LOCATION"; then
+        https://raw.githubusercontent.com/tphakala/birdnet-go/refs/heads/main/internal/conf/config.yaml \
+        -o "$CONFIG_LOCATION"; then
         bashio::log.warning "Could not download default config.yaml; seeding an empty document so addon defaults can populate it"
         echo '{}' > "$CONFIG_LOCATION"
     fi
@@ -186,5 +186,5 @@ LOG_DIR="/config/logs"
 if [ -d "$LOG_DIR" ]; then
     bashio::log.info "Trimming log files older than ${LOG_MAX_AGE_DAYS} days in ${LOG_DIR}"
     ln -sf "$LOG_DIR" /logs
-    find "$LOG_DIR" -type f -name "*.log*" -mtime +"$LOG_MAX_AGE_DAYS" -delete 2>/dev/null || true
+    find "$LOG_DIR" -type f -name "*.log*" -mtime +"$LOG_MAX_AGE_DAYS" -delete 2> /dev/null || true
 fi

birdnet-pi-zach/DOCS.md

@@ -9,9 +9,9 @@ Here are some example tests I did (the whole threads are really interesting also
 
 **My recommendation:**
 
-- **Best entry system (< 50 €):** Boya By-lm40 (30 €) + deadcat (10 €)
-- **Best middle end system (< 150 €):** Clippy EM272 TRS/TRRS (55 €) + Rode AI micro trs/trrs to usb (70 €) + Rycote deadcat (27 €)
-- **Best high end system (<400 €):** Clippy EM272 XLR (85 €) or LOM Ucho Pro (75 €) + Focusrite Scarlet 2i2 4th Gen (200 €) + Bubblebee Pro Extreme deadcat (45 €)
+- **Best entry system (< 50 €):** Boya By-lm40 (30 €) + deadcat (10 €)
+- **Best middle end system (< 150 €):** Clippy EM272 TRS/TRRS (55 €) + Rode AI micro trs/trrs to usb (70 €) + Rycote deadcat (27 €)
+- **Best high end system (<400 €):** Clippy EM272 XLR (85 €) or LOM Ucho Pro (75 €) + Focusrite Scarlet 2i2 4th Gen (200 €) + Bubblebee Pro Extreme deadcat (45 €)
 
 **Sources for high end microphones in Europe:**
 

birdnet-pi-zach/rootfs/helpers/birdnet_to_mqtt.py

@@ -112,6 +112,7 @@ def automatic_mqtt_publish(file, detection, path):
         mqttc.publish(mqtt_topic, json_bird, 1)
         log.info("Posted to MQTT: ok")
 
+
 # Create MQTT client using legacy callback API when available for
 # compatibility with paho-mqtt >= 2.0
 callback_api = getattr(mqtt, "CallbackAPIVersion", None)

birdnet-pi/DOCS.md

@@ -9,9 +9,9 @@ Here are some example tests I did (the whole threads are really interesting also
 
 **My recommendation:**
 
-- **Best entry system (< 50 €):** Boya By-lm40 (30 €) + deadcat (10 €)
-- **Best middle end system (< 150 €):** Clippy EM272 TRS/TRRS (55 €) + Rode AI micro trs/trrs to usb (70 €) + Rycote deadcat (27 €)
-- **Best high end system (<400 €):** Clippy EM272 XLR (85 €) or LOM Ucho Pro (75 €) + Focusrite Scarlet 2i2 4th Gen (200 €) + Bubblebee Pro Extreme deadcat (45 €)
+- **Best entry system (< 50 €):** Boya By-lm40 (30 €) + deadcat (10 €)
+- **Best middle end system (< 150 €):** Clippy EM272 TRS/TRRS (55 €) + Rode AI micro trs/trrs to usb (70 €) + Rycote deadcat (27 €)
+- **Best high end system (<400 €):** Clippy EM272 XLR (85 €) or LOM Ucho Pro (75 €) + Focusrite Scarlet 2i2 4th Gen (200 €) + Bubblebee Pro Extreme deadcat (45 €)
 
 **Sources for high end microphones in Europe:**
 

birdnet-pi/rootfs/helpers/birdnet_to_mqtt.py

@@ -112,6 +112,7 @@ def automatic_mqtt_publish(file, detection, path):
         mqttc.publish(mqtt_topic, json_bird, 1)
         log.info("Posted to MQTT: ok")
 
+
 # Create MQTT client using legacy callback API when available for
 # compatibility with paho-mqtt >= 2.0
 callback_api = getattr(mqtt, "CallbackAPIVersion", None)

birdnet-pipy/CHANGELOG.md

@@ -1,19 +1,19 @@
- 
+
 ## 0.8.8 (2026-08-22)
 - Update to latest version from Suncuss/BirdNET-PiPy (changelog : https://github.com/Suncuss/BirdNET-PiPy/releases)
- 
+
 ## 0.8.6 (2026-08-13)
 - Update to latest version from Suncuss/BirdNET-PiPy (changelog : https://github.com/Suncuss/BirdNET-PiPy/releases)
- 
+
 ## 0.8.5 (2026-08-01)
 - Update to latest version from Suncuss/BirdNET-PiPy (changelog : https://github.com/Suncuss/BirdNET-PiPy/releases)
- 
+
 ## 0.8.4 (2026-07-13)
 - Update to latest version from Suncuss/BirdNET-PiPy (changelog : https://github.com/Suncuss/BirdNET-PiPy/releases)
- 
+
 ## 0.8.3 (2026-07-11)
 - Update to latest version from Suncuss/BirdNET-PiPy (changelog : https://github.com/Suncuss/BirdNET-PiPy/releases)
- 
+
 ## 0.8.2.1 (2026-07-05)
 - Re-tag of 0.8.2-1 with no content change. Home Assistant compares add-on versions with semver semantics, where a `-N` suffix counts as a *pre-release* and sorts **below** the base version — so users already on 0.8.2 saw the 0.8.2-1 nginx fix as "Up-to-date" with the Update button disabled. Four-segment `0.8.2.1` sorts above both `0.8.2` and `0.8.2-1` (and below the next upstream `0.8.3`), so the update becomes installable everywhere.
 
@@ -23,7 +23,7 @@
 
 ## 0.8.2 (2026-07-04)
 - Update to latest version from Suncuss/BirdNET-PiPy (changelog : https://github.com/Suncuss/BirdNET-PiPy/releases)
- 
+
 ## 0.7.5 (2026-06-23)
 - Update to latest version from Suncuss/BirdNET-PiPy (changelog : https://github.com/Suncuss/BirdNET-PiPy/releases)
 ## 0.7.4 (2026-06-01)

birdnet-pipy/config.yaml

@@ -73,7 +73,7 @@ map:
 name: BirdNET-PiPy
 options:
   env_vars: []
-  ICECAST_PASSWORD: ''
+  ICECAST_PASSWORD: ""
   data_location: /config/data
 panel_icon: mdi:bird
 ports:

birdnet-pipy/rootfs/etc/cont-init.d/01-structure.sh

@@ -7,11 +7,11 @@ DATA_LOCATION="$(bashio::config 'data_location' || true)"
 DATA_LOCATION="${DATA_LOCATION:-$DEFAULT_LOCATION}"
 
 case "${DATA_LOCATION}" in
-  /config/*|/share/*|/data/*) ;;
-  *)
-    bashio::log.warning "Invalid data_location '${DATA_LOCATION}', falling back to ${DEFAULT_LOCATION}"
-    DATA_LOCATION="${DEFAULT_LOCATION}"
-    ;;
+    /config/* | /share/* | /data/*) ;;
+    *)
+        bashio::log.warning "Invalid data_location '${DATA_LOCATION}', falling back to ${DEFAULT_LOCATION}"
+        DATA_LOCATION="${DEFAULT_LOCATION}"
+        ;;
 esac
 
 LEGACY1="/config/birdnet-pipy/data"
@@ -19,14 +19,14 @@ LEGACY2="/data"
 
 mkdir -p "${DATA_LOCATION}"
 
-if [ -z "$(ls -A "${DATA_LOCATION}" 2>/dev/null || true)" ]; then
-  if [ -d "${LEGACY1}" ] && [ -n "$(ls -A "${LEGACY1}" 2>/dev/null || true)" ]; then
-    bashio::log.notice "Migrating legacy data from ${LEGACY1} to ${DATA_LOCATION}"
-    cp -a "${LEGACY1}/." "${DATA_LOCATION}/" || true
-  elif [ -d "${LEGACY2}" ] && [ "${LEGACY2}" != "${DATA_LOCATION}" ] && [ -n "$(ls -A "${LEGACY2}" 2>/dev/null || true)" ]; then
-    bashio::log.notice "Migrating legacy data from ${LEGACY2} to ${DATA_LOCATION}"
-    cp -a "${LEGACY2}/." "${DATA_LOCATION}/" || true
-  fi
+if [ -z "$(ls -A "${DATA_LOCATION}" 2> /dev/null || true)" ]; then
+    if [ -d "${LEGACY1}" ] && [ -n "$(ls -A "${LEGACY1}" 2> /dev/null || true)" ]; then
+        bashio::log.notice "Migrating legacy data from ${LEGACY1} to ${DATA_LOCATION}"
+        cp -a "${LEGACY1}/." "${DATA_LOCATION}/" || true
+    elif [ -d "${LEGACY2}" ] && [ "${LEGACY2}" != "${DATA_LOCATION}" ] && [ -n "$(ls -A "${LEGACY2}" 2> /dev/null || true)" ]; then
+        bashio::log.notice "Migrating legacy data from ${LEGACY2} to ${DATA_LOCATION}"
+        cp -a "${LEGACY2}/." "${DATA_LOCATION}/" || true
+    fi
 fi
 
 mkdir -p "${DATA_LOCATION}/config" "${DATA_LOCATION}/clips" "${DATA_LOCATION}/logs" "${DATA_LOCATION}/cache" || true

birdnet-pipy/rootfs/etc/cont-init.d/10-config.sh

@@ -7,10 +7,10 @@ CFG_DIR="${DATA_DIR}/config"
 SETTINGS="${CFG_DIR}/user_settings.json"
 
 if [ -f "$SETTINGS" ]; then
-  if ! grep -q 'detection' "$SETTINGS"; then
-    bak="${SETTINGS}.bak"
-    [ -e "$bak" ] && bak="${SETTINGS}.bak.$(date -u +%Y%m%dT%H%M%SZ)"
-    mv -f -- "$SETTINGS" "$bak"
-    echo "WARNING: Erroneous file detected: '$SETTINGS' did not contain 'detection' and was renamed to '$bak'." >&2
-  fi
+    if ! grep -q 'detection' "$SETTINGS"; then
+        bak="${SETTINGS}.bak"
+        [ -e "$bak" ] && bak="${SETTINGS}.bak.$(date -u +%Y%m%dT%H%M%SZ)"
+        mv -f -- "$SETTINGS" "$bak"
+        echo "WARNING: Erroneous file detected: '$SETTINGS' did not contain 'detection' and was renamed to '$bak'." >&2
+    fi
 fi

birdnet-pipy/rootfs/etc/cont-init.d/15-audio_perms.sh

@@ -3,21 +3,21 @@
 set -euo pipefail
 
 SND_GID=""
-if [ -e /dev/snd ] && command -v stat >/dev/null 2>&1; then
-  SND_GID="$(stat -c '%g' /dev/snd 2>/dev/null || true)"
+if [ -e /dev/snd ] && command -v stat > /dev/null 2>&1; then
+    SND_GID="$(stat -c '%g' /dev/snd 2> /dev/null || true)"
 fi
 
-if [ -n "${SND_GID}" ] && getent group audio >/dev/null 2>&1; then
-  current_gid="$(getent group audio | cut -d: -f3 || true)"
-  if [ -n "${current_gid}" ] && [ "${current_gid}" != "${SND_GID}" ]; then
-    groupmod -g "${SND_GID}" audio 2>/dev/null || true
-  fi
+if [ -n "${SND_GID}" ] && getent group audio > /dev/null 2>&1; then
+    current_gid="$(getent group audio | cut -d: -f3 || true)"
+    if [ -n "${current_gid}" ] && [ "${current_gid}" != "${SND_GID}" ]; then
+        groupmod -g "${SND_GID}" audio 2> /dev/null || true
+    fi
 fi
 
 for u in root nginx www-data icecast2; do
-  if id "${u}" >/dev/null 2>&1; then
-    usermod -aG audio "${u}" 2>/dev/null || true
-  fi
+    if id "${u}" > /dev/null 2>&1; then
+        usermod -aG audio "${u}" 2> /dev/null || true
+    fi
 done
 
 # Create /run/pulse/native symlink if the PulseAudio socket is elsewhere
@@ -25,21 +25,21 @@ done
 PULSE_SOCK="${PULSE_SERVER:-}"
 PULSE_SOCK="${PULSE_SOCK#unix:}"
 if [ -n "${PULSE_SOCK}" ] && [ -S "${PULSE_SOCK}" ] && [ ! -S /run/pulse/native ]; then
-  mkdir -p /run/pulse
-  ln -sf "${PULSE_SOCK}" /run/pulse/native
+    mkdir -p /run/pulse
+    ln -sf "${PULSE_SOCK}" /run/pulse/native
 fi
 
 # Copy PulseAudio cookie for the icecast2 user so it can authenticate
-if id icecast2 >/dev/null 2>&1; then
-  ICECAST_HOME="$(getent passwd icecast2 | cut -d: -f6)"
-  if [ -n "${ICECAST_HOME}" ]; then
-    for cookie in /config/.config/pulse/cookie /root/.config/pulse/cookie; do
-      if [ -f "${cookie}" ]; then
-        mkdir -p "${ICECAST_HOME}/.config/pulse"
-        cp "${cookie}" "${ICECAST_HOME}/.config/pulse/cookie"
-        chown icecast2 "${ICECAST_HOME}/.config/pulse" "${ICECAST_HOME}/.config/pulse/cookie"
-        break
-      fi
-    done
-  fi
+if id icecast2 > /dev/null 2>&1; then
+    ICECAST_HOME="$(getent passwd icecast2 | cut -d: -f6)"
+    if [ -n "${ICECAST_HOME}" ]; then
+        for cookie in /config/.config/pulse/cookie /root/.config/pulse/cookie; do
+            if [ -f "${cookie}" ]; then
+                mkdir -p "${ICECAST_HOME}/.config/pulse"
+                cp "${cookie}" "${ICECAST_HOME}/.config/pulse/cookie"
+                chown icecast2 "${ICECAST_HOME}/.config/pulse" "${ICECAST_HOME}/.config/pulse/cookie"
+                break
+            fi
+        done
+    fi
 fi

birdnet-pipy/rootfs/etc/services.d/api/run

@@ -10,10 +10,10 @@ cd /app
 # and core.main reach the API locally, satisfying the wait_for in nginx/run +
 # main/run). Heavy admin jobs cooperatively yield to keep this worker live.
 exec gunicorn wsgi:application \
-  --worker-class geventwebsocket.gunicorn.workers.GeventWebSocketWorker \
-  --workers 1 \
-  --bind 127.0.0.1:5002 \
-  --timeout 120 \
-  --graceful-timeout 30 \
-  --keep-alive 65 \
-  --error-logfile -
+    --worker-class geventwebsocket.gunicorn.workers.GeventWebSocketWorker \
+    --workers 1 \
+    --bind 127.0.0.1:5002 \
+    --timeout 120 \
+    --graceful-timeout 30 \
+    --keep-alive 65 \
+    --error-logfile -

bitwarden/CHANGELOG.md

@@ -1,10 +1,10 @@
- 
+
 ## 1.37.2 (2026-08-29)
 - Update to latest version from dani-garcia/bitwarden_rs (changelog : https://github.com/dani-garcia/bitwarden_rs/releases)
- 
+
 ## 1.37.1 (2026-08-01)
 - Update to latest version from dani-garcia/bitwarden_rs (changelog : https://github.com/dani-garcia/bitwarden_rs/releases)
- 
+
 ## 1.37.0 (2026-07-25)
 - Update to latest version from dani-garcia/bitwarden_rs (changelog : https://github.com/dani-garcia/bitwarden_rs/releases)
 

bitwarden/rootfs/etc/s6-overlay/s6-rc.d/vaultwarden/run

@@ -21,19 +21,19 @@ export ROCKET_SECRET_KEY="${secret_key}"
 # Find the matching log level
 if bashio::config.has_value 'log_level'; then
     case "$(bashio::string.lower "$(bashio::config 'log_level')")" in
-        all|trace)
+        all | trace)
             log_level="trace"
             ;;
         debug)
             log_level="debug"
             ;;
-        info|notice)
+        info | notice)
             log_level="info"
             ;;
         warning)
             log_level="warn"
             ;;
-        error|fatal)
+        error | fatal)
             log_level="error"
             ;;
         off)

booksonic_air/README.md

@@ -64,7 +64,7 @@ Default credentials are shown in the startup logs.
 ### Options
 
 | Option | Type | Default | Description |
-|--------|------|---------|-------------|
+| -------- | ------ | --------- | ------------- |
 | `PGID` | int | `0` | Group ID for file permissions |
 | `PUID` | int | `0` | User ID for file permissions |
 | `TZ` | str | | Timezone (e.g., `Europe/London`) |

browser_brave/CHANGELOG.md

@@ -1,46 +1,46 @@
- 
+
 ## 1.94.121-ls127 (2026-09-05)
 - Update to latest version from linuxserver/docker-brave (changelog : https://github.com/linuxserver/docker-brave/releases)
- 
+
 ## 1.94.117-ls125 (2026-08-29)
 - Update to latest version from linuxserver/docker-brave (changelog : https://github.com/linuxserver/docker-brave/releases)
- 
+
 ## 1.93.138-ls124 (2026-08-22)
 - Update to latest version from linuxserver/docker-brave (changelog : https://github.com/linuxserver/docker-brave/releases)
- 
+
 ## 1.93.136-ls122 (2026-08-13)
 - Update to latest version from linuxserver/docker-brave (changelog : https://github.com/linuxserver/docker-brave/releases)
- 
+
 ## 1.93.134-ls121 (2026-08-08)
 - Update to latest version from linuxserver/docker-brave (changelog : https://github.com/linuxserver/docker-brave/releases)
- 
+
 ## 1.93.129-ls119 (2026-08-01)
 - Update to latest version from linuxserver/docker-brave (changelog : https://github.com/linuxserver/docker-brave/releases)
- 
+
 ## 1.92.144-ls117 (2026-07-25)
 - Update to latest version from linuxserver/docker-brave (changelog : https://github.com/linuxserver/docker-brave/releases)
- 
+
 ## 1.92.141-ls115 (2026-07-18)
 - Update to latest version from linuxserver/docker-brave (changelog : https://github.com/linuxserver/docker-brave/releases)
- 
+
 ## 1.92.140-ls113 (2026-07-16)
 - Update to latest version from linuxserver/docker-brave (changelog : https://github.com/linuxserver/docker-brave/releases)
- 
+
 ## 1.92.139-ls112 (2026-07-11)
 - Update to latest version from linuxserver/docker-brave (changelog : https://github.com/linuxserver/docker-brave/releases)
- 
+
 ## 1.92.134-ls109 (2026-07-04)
 - Update to latest version from linuxserver/docker-brave (changelog : https://github.com/linuxserver/docker-brave/releases)
- 
+
 ## 1.91.180-ls108 (2026-06-27)
 - Update to latest version from linuxserver/docker-brave (changelog : https://github.com/linuxserver/docker-brave/releases)
- 
+
 ## 1.91.175-ls106 (2026-06-20)
 - Update to latest version from linuxserver/docker-brave (changelog : https://github.com/linuxserver/docker-brave/releases)
- 
+
 ## 1.91.172-ls105 (2026-06-13)
 - Update to latest version from linuxserver/docker-brave (changelog : https://github.com/linuxserver/docker-brave/releases)
- 
+
 ## 1.91.171-ls104 (2026-06-11)
 - Update to latest version from linuxserver/docker-brave (changelog : https://github.com/linuxserver/docker-brave/releases)
 ## 1.91.168-ls103 (2026-06-05)

browser_chromium/CHANGELOG.md

@@ -1,12 +1,12 @@
- 
+
 ## 2026.09.05 (2026-09-05)
 - Update to latest version from linuxserver/docker-chromium (changelog : https://github.com/linuxserver/docker-chromium/releases)
 - Upstream tag : version-d39975b5
- 
+
 ## 2026.08.13 (2026-08-13)
 - Update to latest version from linuxserver/docker-chromium (changelog : https://github.com/linuxserver/docker-chromium/releases)
 - Upstream tag : version-e8713bf7
- 
+
 ## 2026.08.01.1 (2026-08-01)
 - Update to latest version from linuxserver/docker-chromium (changelog : https://github.com/linuxserver/docker-chromium/releases)
 - Upstream tag : version-e2e1ec9c
@@ -14,25 +14,25 @@
 
 - Version renamed from `version-bf9e0b4f`, which Home Assistant could not order and therefore could not reliably offer as an update: the previous version held no number that could order it, so the date of this change is used. The addon itself and the upstream version it tracks are unchanged
 
- 
+
 ## version-bf9e0b4f (2026-07-25)
 - Update to latest version from linuxserver/docker-chromium (changelog : https://github.com/linuxserver/docker-chromium/releases)
- 
+
 ## version-ae9a7fca (2026-07-16)
 - Update to latest version from linuxserver/docker-chromium (changelog : https://github.com/linuxserver/docker-chromium/releases)
- 
+
 ## version-30a7c401 (2026-07-11)
 - Update to latest version from linuxserver/docker-chromium (changelog : https://github.com/linuxserver/docker-chromium/releases)
- 
+
 ## version-7148c2a3 (2026-07-04)
 - Update to latest version from linuxserver/docker-chromium (changelog : https://github.com/linuxserver/docker-chromium/releases)
- 
+
 ## version-ec868334 (2026-06-27)
 - Update to latest version from linuxserver/docker-chromium (changelog : https://github.com/linuxserver/docker-chromium/releases)
- 
+
 ## version-b9b82d3e (2026-06-20)
 - Update to latest version from linuxserver/docker-chromium (changelog : https://github.com/linuxserver/docker-chromium/releases)
- 
+
 ## version-cca5154d (2026-06-11)
 - Update to latest version from linuxserver/docker-chromium (changelog : https://github.com/linuxserver/docker-chromium/releases)
 ## version-89f88890 (2026-06-05)

browser_chromium/rootfs/etc/cont-init.d/20-folders.sh

@@ -7,7 +7,6 @@ set -e
 PUID=$(bashio::config "PUID")
 PGID=$(bashio::config "PGID")
 
-
 # Create cache
 #mkdir -p /.cache
 #chmod 755 /.cache

browser_chromium/rootfs/etc/usr/bin/wrapped-chromium

@@ -5,12 +5,12 @@ set -Eeuo pipefail
 
 # Resolve chromium binary (LSIO uses this path)
 if [[ -x /usr/lib/chromium/chromium ]]; then
-  BIN=/usr/lib/chromium/chromium
+	BIN=/usr/lib/chromium/chromium
 elif command -v chromium >/dev/null 2>&1; then
-  BIN="$(command -v chromium)"
+	BIN="$(command -v chromium)"
 else
-  echo "ERROR: chromium binary not found" >&2
-  exit 127
+	echo "ERROR: chromium binary not found" >&2
+	exit 127
 fi
 
 # Fixed profile dir as requested
@@ -19,7 +19,7 @@ mkdir -p "${USER_DATA_DIR}"
 
 # Cleanup stale locks if chromium is not already running
 if ! pgrep -f 'chromium' >/dev/null 2>&1; then
-  rm -f "${USER_DATA_DIR}/Singleton"* || true
+	rm -f "${USER_DATA_DIR}/Singleton"* || true
 fi
 
 # Detect seccomp mode (0 = disabled)
@@ -27,22 +27,22 @@ seccomp_mode="$(awk -F':' '/^Seccomp:/{gsub(/[[:space:]]/,"",$2); print $2}' /pr
 
 # Base arguments (exactly what you requested + required safety flags)
 args=(
-  --remote-debugging-address=0.0.0.0
-  --remote-debugging-port=9221
-  --user-data-dir="${USER_DATA_DIR}"
-  --disable-dev-shm-usage
-  --no-first-run
-  --no-default-browser-check
-  --disable-background-networking
-  --disable-sync
-  --password-store=basic
-  "--simulate-outdated-no-au=Tue, 31 Dec 2099 23:59:59 GMT"
-  --start-maximized
+	--remote-debugging-address=0.0.0.0
+	--remote-debugging-port=9221
+	--user-data-dir="${USER_DATA_DIR}"
+	--disable-dev-shm-usage
+	--no-first-run
+	--no-default-browser-check
+	--disable-background-networking
+	--disable-sync
+	--password-store=basic
+	"--simulate-outdated-no-au=Tue, 31 Dec 2099 23:59:59 GMT"
+	--start-maximized
 )
 
 # Container reality: sandbox usually breaks unless seccomp is fully disabled
 if [[ "${seccomp_mode}" != "0" ]]; then
-  args+=( --no-sandbox --test-type )
+	args+=(--no-sandbox --test-type)
 fi
 
 # IMPORTANT:

browserless_chrome/CHANGELOG.md

@@ -1,37 +1,37 @@
- 
+
 ## 2.56.3 (2026-09-05)
 - Update to latest version from browserless/chrome (changelog : https://github.com/browserless/chrome/releases)
- 
+
 ## 2.56.0 (2026-08-22)
 - Update to latest version from browserless/chrome (changelog : https://github.com/browserless/chrome/releases)
- 
+
 ## 2.55.4 (2026-08-13)
 - Update to latest version from browserless/chrome (changelog : https://github.com/browserless/chrome/releases)
- 
+
 ## 2.55.3 (2026-08-08)
 - Update to latest version from browserless/chrome (changelog : https://github.com/browserless/chrome/releases)
- 
+
 ## 2.55.2 (2026-08-01)
 - Update to latest version from browserless/chrome (changelog : https://github.com/browserless/chrome/releases)
- 
+
 ## 2.55.0 (2026-07-16)
 - Update to latest version from browserless/chrome (changelog : https://github.com/browserless/chrome/releases)
- 
+
 ## 2.54.2 (2026-07-04)
 - Update to latest version from browserless/chrome (changelog : https://github.com/browserless/chrome/releases)
- 
+
 ## 2.54.1 (2026-06-23)
 - Update to latest version from browserless/chrome (changelog : https://github.com/browserless/chrome/releases)
- 
+
 ## 2.54.0 (2026-06-20)
 - Update to latest version from browserless/chrome (changelog : https://github.com/browserless/chrome/releases)
- 
+
 ## 2.52.2 (2026-06-17)
 - Update to latest version from browserless/chrome (changelog : https://github.com/browserless/chrome/releases)
- 
+
 ## 2.52.1 (2026-06-13)
 - Update to latest version from browserless/chrome (changelog : https://github.com/browserless/chrome/releases)
- 
+
 ## 2.52.0 (2026-06-11)
 - Update to latest version from browserless/chrome (changelog : https://github.com/browserless/chrome/releases)
 ## 2.51.0 (2026-06-05)

calibre/CHANGELOG.md

@@ -1,16 +1,16 @@
- 
+
 ## 9.14.0 (2026-08-29)
 - Update to latest version from linuxserver/docker-calibre (changelog : https://github.com/linuxserver/docker-calibre/releases)
- 
+
 ## 9.13.0 (2026-08-08)
 - Update to latest version from linuxserver/docker-calibre (changelog : https://github.com/linuxserver/docker-calibre/releases)
- 
+
 ## 9.12.0 (2026-08-01)
 - Update to latest version from linuxserver/docker-calibre (changelog : https://github.com/linuxserver/docker-calibre/releases)
- 
+
 ## 9.11.0 (2026-07-04)
 - Update to latest version from linuxserver/docker-calibre (changelog : https://github.com/linuxserver/docker-calibre/releases)
- 
+
 ## 9.10.0 (2026-06-27)
 - Update to latest version from linuxserver/docker-calibre (changelog : https://github.com/linuxserver/docker-calibre/releases)
 

calibre/README.md

@@ -62,7 +62,7 @@ Please read the upstream container documentation for further info: https://githu
 ### Options
 
 | Option | Type | Default | Description |
-|--------|------|---------|-------------|
+| -------- | ------ | --------- | ------------- |
 | `PGID` | int | `0` | Group ID for file permissions |
 | `PUID` | int | `0` | User ID for file permissions |
 | `TZ` | str | | Timezone (e.g., `Europe/London`) |

calibre_web/CHANGELOG.md

@@ -1,4 +1,4 @@
- 
+
 ## 0.6.27.4 (2026-09-04)
 - Fix: Kobo sync could not be enabled, failing with "Kepubify binary not found" even when the path was set by hand. The LinuxServer base image installs the converter as `/usr/bin/kepubify` with `curl -o`, which leaves it mode 0644 and gives it a name calibre-web does not accept : `binary_helper.py` only takes `kepubify-linux-64bit` or `kepubify-linux-32bit`, and only when `os.access(X_OK)` passes. The addon now makes the binary executable and publishes it as `/opt/kepubify/kepubify-linux-64bit`, the directory calibre-web's own autodetection already probes, so the path is filled in without any manual step (https://github.com/alexbelgium/hassio-addons/issues/3040)
 - Fix: on installs created before that change, calibre-web had already run its autodetection once, found nothing usable and stored an empty path, and it never retries. An empty path is now reset so calibre-web detects the converter itself at the next start. A path set by hand is left alone

calibre_web/README.md

@@ -62,7 +62,7 @@ Default password: admin123
 ### Options
 
 | Option | Type | Default | Description |
-|--------|------|---------|-------------|
+| -------- | ------ | --------- | ------------- |
 | `PGID` | int | `0` | Group ID for file permissions |
 | `PUID` | int | `0` | User ID for file permissions |
 | `TZ` | str | | Timezone (e.g., `Europe/London`) |
@@ -99,7 +99,7 @@ This addon supports mounting both local drives and remote SMB shares:
 
 ### Optional Calibre-Web features
 
-Calibre-Web documents optional extras that a manual installation adds with `pip install calibreweb[metadata]` and similar. **You do not need to install anything here**: the LinuxServer base image this add-on builds on installs Calibre-Web's `requirements.txt` *and* its full `optional-requirements.txt` into the application's virtualenv, so the gdrive, gmail, goodreads, ldap, oauth, metadata, comics and kobo dependencies are all present already. Running `pip install calibreweb[...]` inside the container is not a supported way to enable them: it installs the PyPI distribution of Calibre-Web over an installation that already has those dependencies, and it can disturb the versions the base image pinned. It is also thrown away, because the Supervisor recreates the add-on container on restart.
+Calibre-Web documents optional extras that a manual installation adds with `pip install calibreweb[metadata]` and similar. **You do not need to install anything here**: the LinuxServer base image this add-on builds on installs Calibre-Web's `requirements.txt` _and_ its full `optional-requirements.txt` into the application's virtualenv, so the gdrive, gmail, goodreads, ldap, oauth, metadata, comics and kobo dependencies are all present already. Running `pip install calibreweb[...]` inside the container is not a supported way to enable them: it installs the PyPI distribution of Calibre-Web over an installation that already has those dependencies, and it can disturb the versions the base image pinned. It is also thrown away, because the Supervisor recreates the add-on container on restart.
 
 Optional features are switched on in the Calibre-Web web interface, not in the add-on options, under `Admin` -> `Basic Configuration` -> `Feature Configuration` (for example `Enable Uploads`, `Enable Kobo sync`, `Use Goodreads`).
 

calibre_web/rootfs/etc/cont-init.d/80-configuration.sh

@@ -30,16 +30,16 @@ else
     # duplicates it can leave behind are entries calibre-web skips or already trusts.
     # The column only exists once calibre-web 0.6.27+ has migrated app.db and cont-init runs
     # before calibre-web, so a failure here is not fatal : the next start applies it.
-    trusted_ips_error=$(sqlite3 /config/app.db "update settings set config_reverse_proxy_trusted_ips='127.0.0.1,::1,::ffff:127.0.0.1,172.30.32.0/23,::ffff:172.30.32.0/119,'||coalesce(config_reverse_proxy_trusted_ips,'') where coalesce(config_reverse_proxy_trusted_ips,'') not like '%::ffff:172.30.32.0/119%'" 2>&1) ||
-        bashio::log.warning "Could not set the ingress trusted ip list, it will be applied at next start (${trusted_ips_error})"
+    trusted_ips_error=$(sqlite3 /config/app.db "update settings set config_reverse_proxy_trusted_ips='127.0.0.1,::1,::ffff:127.0.0.1,172.30.32.0/23,::ffff:172.30.32.0/119,'||coalesce(config_reverse_proxy_trusted_ips,'') where coalesce(config_reverse_proxy_trusted_ips,'') not like '%::ffff:172.30.32.0/119%'" 2>&1) \
+        || bashio::log.warning "Could not set the ingress trusted ip list, it will be applied at next start (${trusted_ips_error})"
 
     # Calibre-web autodetects kepubify only while this setting is still NULL. On every install
     # that predates the Dockerfile fix above, that detection already ran, found nothing usable and
     # stored an empty string, so it is never retried. Put an empty value back to NULL and
     # calibre-web detects /opt/kepubify itself when it starts, a few seconds after this runs.
     # A path the user set by hand is not empty and is left alone.
-    kepubify_error=$(sqlite3 /config/app.db "update settings set config_kepubifypath = NULL where config_kepubifypath = ''" 2>&1) ||
-        bashio::log.warning "Could not reset the kepubify path, it will be applied at next start (${kepubify_error})"
+    kepubify_error=$(sqlite3 /config/app.db "update settings set config_kepubifypath = NULL where config_kepubifypath = ''" 2>&1) \
+        || bashio::log.warning "Could not reset the kepubify path, it will be applied at next start (${kepubify_error})"
 fi
 
 bashio::log.info "Default username:password is admin:admin123"

changedetection.io/CHANGELOG.md

@@ -1,7 +1,7 @@
- 
+
 ## 0.60.3 (2026-09-05)
 - Update to latest version from linuxserver/docker-changedetection.io (changelog : https://github.com/linuxserver/docker-changedetection.io/releases)
- 
+
 ## 0.55.8 (2026-07-16)
 - Update to latest version from linuxserver/docker-changedetection.io (changelog : https://github.com/linuxserver/docker-changedetection.io/releases)
 

changedetection.io/README.md

@@ -52,7 +52,7 @@ You can add a shortcut pointing to your Changedetection.io instance with the fol
 ### Options
 
 | Option | Type | Default | Description |
-|--------|------|---------|-------------|
+| -------- | ------ | --------- | ------------- |
 | `PGID` | int | `0` | Group ID for file permissions |
 | `PUID` | int | `0` | User ID for file permissions |
 | `TZ` | str | | Timezone (e.g., `Europe/London`) |

claude_desktop/CHANGELOG.md

@@ -1,12 +1,12 @@
- 
+
 ## 07308545.6 (2026-09-05)
 - Update to latest version from aaddrick/claude-desktop-debian (changelog : https://github.com/aaddrick/claude-desktop-debian/releases)
 - Upstream tag : v3.2.3+claude1.40609.1
- 
+
 ## 07308545.5 (2026-08-29)
 - Update to latest version from aaddrick/claude-desktop-debian (changelog : https://github.com/aaddrick/claude-desktop-debian/releases)
 - Upstream tag : v3.2.2+claude1.37937.3
- 
+
 ## 07308545.4 (2026-08-22)
 - Update to latest version from aaddrick/claude-desktop-debian (changelog : https://github.com/aaddrick/claude-desktop-debian/releases)
 - Upstream tag : v3.2.2+claude1.32885.1
@@ -71,7 +71,7 @@
 
 ## 07308545.1 (17-08-2026)
 - Minor bugs fixed
- 
+
 ## 07308543.1 (17-08-2026)
 - Fix the "For your security, sign in again" prompt recurring on every restart again. The v1.37
   `safeStorage` patch (`86-claude_safestorage.sh` / `claude-safestorage-patch.js`) only knew how
@@ -94,11 +94,11 @@
 ## 07308545 (2026-08-15)
 - Update to latest version from aaddrick/claude-desktop-debian (changelog : https://github.com/aaddrick/claude-desktop-debian/releases)
 - Upstream tag : v3.2.2+claude1.30096.1
- 
+
 ## 07308544 (2026-08-13)
 - Update to latest version from aaddrick/claude-desktop-debian (changelog : https://github.com/aaddrick/claude-desktop-debian/releases)
 - Upstream tag : v3.2.2+claude1.28929.0
- 
+
 ## 07308543 (2026-08-08)
 - Update to latest version from linuxserver/docker-baseimage-selkies (changelog : https://github.com/linuxserver/docker-baseimage-selkies/releases)
 - Upstream tag : debiantrixie-version-07308543
@@ -185,10 +185,10 @@
 
 ## 2026.08.02 (02-08-2026)
 - Minor bugs fixed
- 
+
 ## ubunturesolute-version-3a10bef7 (2026-08-01)
 - Update to latest version from linuxserver/docker-baseimage-selkies (changelog : https://github.com/linuxserver/docker-baseimage-selkies/releases)
- 
+
 ## kali-version-e963b19b (2026-08-01)
 - Update to latest version from linuxserver/docker-baseimage-selkies (changelog : https://github.com/linuxserver/docker-baseimage-selkies/releases)
 ## 1.37 (28-07-2026)
@@ -199,7 +199,7 @@
   - **`gnome-keyring` stays out of the image.** Re-adding it would reintroduce the first-boot keyring password prompt that blocks Claude Desktop from launching at all. This route needs no keyring, no D-Bus Secret Service, no daemon and no password, so no prompt can appear. The trade-off is unchanged from v1.35 and is inherent to the `basic` backend: its key is fixed rather than gated by a keyring, so any process that can read the persistent `$HOME/.config/Claude` profile can recover the stored credentials.
   - **One-time step after upgrading.** The previously stored session is already stale, so a single sign-in is still needed once after this update; it then persists across restarts.
 
- 
+
 ## 1.36.4 (28-07-2026)
 
 - Fix Selkies dying with a Rust `RuntimeDirNotSet` unwrap panic just after `Data WebSocket Server listening on port 8081`, and the data websocket then being proxied to the wrong port. Upstream relies on s6-rc ordering: `init-selkies-config` publishes `XDG_RUNTIME_DIR` and `CUSTOM_WS_PORT` into the s6 envdir and `svc-selkies` starts afterwards. The add-on entrypoint replaces s6-overlay and starts every `s6-rc.d` run script in parallel with no dependency graph, so Selkies can snapshot the envdir before that oneshot has written to it -- which is why it bound port 8081 (its own default) instead of the 8082 nginx proxies to, and why its Wayland compositor found no runtime directory to bind a socket in. `20-folders.sh` now exports both variables inside each run script, where no start ordering can lose them, and corrects the base image's `$HOME/.XDG` override where that write happens instead of appending a correction after the `exit 0` that the oneshot-tolerance block adds -- which meant the correction never ran on any boot after the first.
@@ -210,7 +210,7 @@
 
 ## 1.36.2 (28-07-2026)
 - Minor bugs fixed
- 
+
 ## 1.36.1 (27-07-2026)
 
 - Fix the Codex CLI install failing on every boot with `Verified Codex <version> installation failed; Codex is unavailable this boot`, leaving `install_codex_cli` permanently non-functional. The download, its SHA-256 verification, and the extraction all succeeded; the chain broke at the final step, which validates the candidate binary by running `--version` as the `abc` runtime user. `mktemp -d` creates its directory `0700 root:root`, and `abc` cannot traverse a root-only directory, so executing the staged binary failed with `unable to exec: Permission denied` (exit 126) before it could be moved into place. Reproduced and fixed by making the staging directory traversable (`chmod 0755`) immediately after `mktemp`; verified on a live add-on container, where the same probe goes from exit 126 to success once the mode is widened. Nothing secret is staged there — the public release archive and the extracted binary, both world-readable upstream artifacts — and the existing `cleanup()` trap still removes the directory on exit. The validation deliberately keeps running as `abc` rather than root, so the binary is exercised as the identity that will actually run it.
@@ -240,10 +240,10 @@
 ## 1.33 (22-07-2026)
 
 - Add cowork virtualization support: `qemu-system-x86` and `ovmf` (Bookworm main, installed via apt) plus `virtiofsd` for sharing the workspace into the sandbox microVM. `virtiofsd` is only packaged for Debian trixie/sid, not Bookworm or bookworm-backports, and its trixie `.deb` links a newer GLIBC than this add-on's Bookworm runtime — so it now gets built from the pinned crates.io release (`1.14.0`) in a dedicated `virtiofsd-builder` stage, the same GLIBC-safe pattern already used for `rtk` and `tokensave`. Its build deps (`libseccomp-dev`, `libcap-ng-dev`, `pkg-config`, `clang`, `libclang-dev`) live only in that builder stage; only the runtime shared libs (`libseccomp2`, `libcap-ng0`) ship in the final image. The built binary is validated with `--version` at build time alongside `rtk`/`tokensave`, so a GLIBC/ABI mismatch fails the image build instead of surfacing at container start. Docker itself is deliberately not installed: this base image already ships Docker-in-Docker (`docker-ce`/`containerd.io` from Docker's own apt repo, started via the pre-existing `START_DOCKER` env var) — an initial attempt to also `apt-get install docker.io` broke the build, since Debian's package pulls in `containerd`/`runc`, which apt refuses to install alongside the base image's already-installed `containerd.io` (`Conflicts`).
- 
+
 ## ubunturesolute-version-8208e985 (2026-07-21)
 - Update to latest version from linuxserver/docker-baseimage-selkies (changelog : https://github.com/linuxserver/docker-baseimage-selkies/releases)
- 
+
 ## kali-version-9ad48e7a (2026-07-18)
 - Update to latest version from linuxserver/docker-baseimage-selkies (changelog : https://github.com/linuxserver/docker-baseimage-selkies/releases)
 ## 1.32 (17-07-2026)

claude_desktop/rootfs/defaults/autostart

@@ -55,9 +55,9 @@
 # shared memory into ordinary files for no benefit. If the size cannot be determined, keep the
 # flag — the crash it prevents is worse than the overhead it costs.
 SHM_FLAGS="--disable-dev-shm-usage"
-SHM_KB="$(df -k /dev/shm 2> /dev/null | awk 'NR==2 {print $2}')"
+SHM_KB="$(df -k /dev/shm 2>/dev/null | awk 'NR==2 {print $2}')"
 if [ -n "$SHM_KB" ] && [ "$SHM_KB" -ge 262144 ]; then
-    SHM_FLAGS=""
+	SHM_FLAGS=""
 fi
 
 # SHM_FLAGS must stay unquoted so it expands to a separate argument, or to nothing at all.

claude_desktop/rootfs/etc/cont-init.d/81-codex_cli.sh

@@ -141,7 +141,7 @@ release_info=""
 if curl -fsSL --retry 3 --retry-delay 2 --connect-timeout 10 --max-time 30 \
     -o "$release_metadata" "$CODEX_RELEASE_API"; then
     release_info="$(
-        CODEX_ASSET="$CODEX_ASSET" python3 - "$release_metadata" <<'PY' 2> /dev/null || true
+        CODEX_ASSET="$CODEX_ASSET" python3 - "$release_metadata" << 'PY' 2> /dev/null || true
 import json
 import os
 import re
@@ -249,7 +249,7 @@ fi
 {
     printf '#!/usr/bin/env bash\n'
     printf 'CODEX_REAL=%q\n' "$CODEX_REAL"
-    cat <<'SH'
+    cat << 'SH'
 RUNTIME_HOME="$(getent passwd abc | cut -d: -f6)"
 if [ -z "$RUNTIME_HOME" ]; then
     echo "codex: unable to resolve the abc runtime home" >&2
@@ -338,8 +338,7 @@ ln -sfn "$CODEX_BIN" "$CODEX_LINK"
 CODEX_SANDBOX_MODE="$(bashio::config 'codex_sandbox_mode' 'danger-full-access')"
 run_as_runtime_user mkdir -p "$RUNTIME_HOME/.codex"
 CODEX_SANDBOX_MODE="$CODEX_SANDBOX_MODE" RUNTIME_HOME="$RUNTIME_HOME" \
-    run_as_runtime_user python3 - <<'PY' \
-    || bashio::log.warning "Unable to update the managed Codex configuration block"
+    run_as_runtime_user python3 - << 'PY' || bashio::log.warning "Unable to update the managed Codex configuration block"
 import os
 import re
 import tomllib

claude_desktop/rootfs/etc/cont-init.d/82-claude_tools.sh

@@ -30,7 +30,7 @@ manage_claude_md_block() {
         fi
     elif [ -f "$CLAUDE_MD" ] && grep -qF "$begin" "$CLAUDE_MD"; then
         bashio::log.info "Removing ${name} guidance from CLAUDE.md"
-        CLAUDE_MD="$CLAUDE_MD" BLOCK_NAME="$name" python3 - <<'PY' || bashio::log.warning "Unable to remove the ${name} guidance automatically"
+        CLAUDE_MD="$CLAUDE_MD" BLOCK_NAME="$name" python3 - << 'PY' || bashio::log.warning "Unable to remove the ${name} guidance automatically"
 import os
 import re
 from pathlib import Path
@@ -58,7 +58,7 @@ PY
 manage_settings_hook() {
     # manage_settings_hook <event> <matcher> <command> <add|remove>
     HOOK_EVENT="$1" HOOK_MATCHER="$2" HOOK_COMMAND="$3" HOOK_ACTION="$4" \
-        python3 - <<'PY' || bashio::log.warning "Unable to update the $1 hook for '$3'"
+        python3 - << 'PY' || bashio::log.warning "Unable to update the $1 hook for '$3'"
 import json
 import os
 from pathlib import Path
@@ -389,14 +389,14 @@ bashio::log.info "MCP servers for Claude Desktop: ${MCP_SERVERS_DESKTOP}"
 bashio::log.info "MCP servers for Claude Code: ${MCP_SERVERS_CODE}"
 
 HEADROOM_ENABLED="$HEADROOM_ENABLED" HEADROOM_BIN="$(command -v headroom || echo headroom)" \
-    HEADROOM_HF_HOME="${HOME}/.headroom/hf" \
-    TOKENSAVE_ENABLED="$TOKENSAVE_ENABLED" TOKENSAVE_BIN="$(command -v tokensave || echo tokensave)" \
-    CODEX_ENABLED="$CODEX_ENABLED" CODEX_BIN="$CODEX_BIN" CODEX_SANDBOX_MODE="$CODEX_SANDBOX_MODE" \
-    HA_MCP_ENABLED="$HA_MCP_ENABLED" HA_MCP_URL="$HA_MCP_URL" HA_MCP_TOKEN="$HA_MCP_TOKEN" \
-    MCP_PROXY_BIN="$(command -v mcp-proxy || echo mcp-proxy)" \
-    MCP_SERVERS_DESKTOP="$MCP_SERVERS_DESKTOP" MCP_SERVERS_CODE="$MCP_SERVERS_CODE" \
-    CLAUDE_DESKTOP_CONFIG="$CLAUDE_DESKTOP_CONFIG" CLAUDE_CODE_CONFIG="$CLAUDE_CODE_CONFIG" \
-    python3 - <<'PY' || bashio::log.warning "Unable to update the MCP server registrations automatically"
+HEADROOM_HF_HOME="${HOME}/.headroom/hf" \
+TOKENSAVE_ENABLED="$TOKENSAVE_ENABLED" TOKENSAVE_BIN="$(command -v tokensave || echo tokensave)" \
+CODEX_ENABLED="$CODEX_ENABLED" CODEX_BIN="$CODEX_BIN" CODEX_SANDBOX_MODE="$CODEX_SANDBOX_MODE" \
+HA_MCP_ENABLED="$HA_MCP_ENABLED" HA_MCP_URL="$HA_MCP_URL" HA_MCP_TOKEN="$HA_MCP_TOKEN" \
+MCP_PROXY_BIN="$(command -v mcp-proxy || echo mcp-proxy)" \
+MCP_SERVERS_DESKTOP="$MCP_SERVERS_DESKTOP" MCP_SERVERS_CODE="$MCP_SERVERS_CODE" \
+CLAUDE_DESKTOP_CONFIG="$CLAUDE_DESKTOP_CONFIG" CLAUDE_CODE_CONFIG="$CLAUDE_CODE_CONFIG" \
+    python3 - << 'PY' || bashio::log.warning "Unable to update the MCP server registrations automatically"
 import json
 import os
 from pathlib import Path
@@ -607,7 +607,7 @@ PY
 # Guide Claude to actually use the Headroom compression tools so the MCP integration produces
 # real savings when transparent proxying is unavailable.
 if $HEADROOM_ENABLED; then
-    manage_claude_md_block headroom add <<'MD'
+    manage_claude_md_block headroom add << 'MD'
 ## Headroom context compression
 
 A local Headroom proxy (127.0.0.1:8787) backs the `headroom` MCP tools. To save context tokens:
@@ -636,7 +636,7 @@ if $HEADROOM_ENABLED && bashio::config.true 'headroom_wrap_claude_code'; then
 else
     HEADROOM_ROUTE_ACTION="remove"
 fi
-HEADROOM_ROUTE_ACTION="$HEADROOM_ROUTE_ACTION" python3 - <<'PY' || bashio::log.warning "Unable to manage the Claude Code proxy routing env"
+HEADROOM_ROUTE_ACTION="$HEADROOM_ROUTE_ACTION" python3 - << 'PY' || bashio::log.warning "Unable to manage the Claude Code proxy routing env"
 import json
 import os
 from pathlib import Path
@@ -703,7 +703,7 @@ manage_settings_hook PostToolUse "Bash|Grep|Glob|WebFetch" "$HEADROOM_HOOK_CMD"
 # Tell Claude Code that it can configure Home Assistant over the Core API via the shipped
 # `ha-cli` helper (no /config filesystem mount needed).
 if bashio::config.true 'enable_ha_api_helper'; then
-    manage_claude_md_block ha-api-helper add <<'MD'
+    manage_claude_md_block ha-api-helper add << 'MD'
 ## Configuring Home Assistant
 
 You can configure this Home Assistant instance through its Core API using the `ha-cli`
@@ -731,7 +731,7 @@ fi
 # Registering the MCP server is not enough on its own: without guidance the model rarely reaches
 # for a second agent, the same gap the Headroom block above exists to close.
 if $CODEX_ENABLED; then
-    manage_claude_md_block codex add <<'MD'
+    manage_claude_md_block codex add << 'MD'
 ## Delegating to ChatGPT Codex
 
 The `codex` MCP server runs OpenAI's Codex agent locally, signed in with the user's ChatGPT

claude_desktop/rootfs/etc/cont-init.d/83-claude_permissions.sh

@@ -19,7 +19,7 @@ esac
 # only while it still holds one of those managed values — a defaultMode the user set by hand
 # is never deleted. Ownership of the written file is reconciled by 84-claude_runtime_ownership.sh.
 mkdir -p "$(dirname "$SETTINGS_PATH")"
-PERMISSION_MODE="$PERMISSION_MODE" SETTINGS_PATH="$SETTINGS_PATH" python3 - <<'PY'
+PERMISSION_MODE="$PERMISSION_MODE" SETTINGS_PATH="$SETTINGS_PATH" python3 - << 'PY'
 import json
 import os
 from pathlib import Path

claude_desktop/rootfs/etc/cont-init.d/86-claude_safestorage.sh

@@ -36,7 +36,7 @@ fi
 # archive stays unpatched, so every later boot would retry under a new pid and strand another
 # copy until the container runs out of space.
 cleanup_tmp() {
-    find "$(dirname "$ASAR")" -maxdepth 1 -name ".$(basename "$ASAR").addon-tmp.*" -delete 2>/dev/null || true
+    find "$(dirname "$ASAR")" -maxdepth 1 -name ".$(basename "$ASAR").addon-tmp.*" -delete 2> /dev/null || true
 }
 
 if output=$(timeout 120 node "$PATCHER" "$ASAR" 2>&1); then

claude_desktop/rootfs/usr/local/bin/claude-tools-doctor.sh

@@ -45,7 +45,7 @@ if [ "$(bashio::config 'permission_mode')" = "bypass" ]; then
 fi
 
 section "Claude Code permission state"
-RUNTIME_HOME="$RUNTIME_HOME" python3 - <<'PY'
+RUNTIME_HOME="$RUNTIME_HOME" python3 - << 'PY'
 import json
 import os
 from pathlib import Path
@@ -66,7 +66,7 @@ else:
 PY
 
 section "MCP registrations (environment values redacted)"
-RUNTIME_HOME="$RUNTIME_HOME" python3 - <<'PY'
+RUNTIME_HOME="$RUNTIME_HOME" python3 - << 'PY'
 import json
 import os
 from pathlib import Path
@@ -104,7 +104,7 @@ for path in paths:
 PY
 
 section "Claude Code hooks"
-RUNTIME_HOME="$RUNTIME_HOME" python3 - <<'PY'
+RUNTIME_HOME="$RUNTIME_HOME" python3 - << 'PY'
 import json
 import os
 from pathlib import Path

claude_desktop/rootfs/usr/local/bin/ha-cli

@@ -96,7 +96,7 @@ def resolve_endpoint():
 def _url(base, path):
     path = path.lstrip("/")
     if path.startswith("api/"):
-        path = path[len("api/"):]
+        path = path[len("api/") :]
     return base.rstrip("/") + "/" + path
 
 
@@ -133,7 +133,9 @@ def rest(method, base, token, path, body=None):
     if body is not None:
         data = json.dumps(body).encode("utf-8")
         headers["Content-Type"] = "application/json"
-    req = urllib.request.Request(_url(base, path), data=data, method=method, headers=headers)
+    req = urllib.request.Request(
+        _url(base, path), data=data, method=method, headers=headers
+    )
     try:
         with urllib.request.urlopen(req, timeout=30) as resp:
             text = resp.read().decode("utf-8")
@@ -141,7 +143,9 @@ def rest(method, base, token, path, body=None):
         detail = exc.read().decode("utf-8", "replace").strip()
         sys.exit(f"ha-cli: HTTP {exc.code} {exc.reason} on {method} {path}\n{detail}")
     except urllib.error.URLError as exc:
-        sys.exit(f"ha-cli: cannot reach Home Assistant ({exc.reason}) on {method} {path}")
+        sys.exit(
+            f"ha-cli: cannot reach Home Assistant ({exc.reason}) on {method} {path}"
+        )
     try:
         return json.loads(text) if text.strip() else None
     except ValueError:
@@ -214,7 +218,9 @@ def main(argv):
             sys.exit("usage: ha-cli call <domain.service> [BODY]")
         domain, service = args[0].split(".", 1)
         body = _read_body(args[1]) if len(args) > 1 else None
-        _print(rest("POST", rest_base, token, f"services/{domain}/{service}", body or {}))
+        _print(
+            rest("POST", rest_base, token, f"services/{domain}/{service}", body or {})
+        )
     elif cmd == "states":
         path = f"states/{args[0]}" if args else "states"
         _print(rest("GET", rest_base, token, path))

claude_desktop/rootfs/usr/local/bin/headroom-posttooluse-compress.py

@@ -76,7 +76,11 @@ def main() -> int:
 
     # Find big string/array fields before paying the headroom import cost.
     def is_string_array(value):
-        return isinstance(value, list) and len(value) > ARRAY_KEEP and all(isinstance(v, str) for v in value)
+        return (
+            isinstance(value, list)
+            and len(value) > ARRAY_KEEP
+            and all(isinstance(v, str) for v in value)
+        )
 
     if isinstance(response, str):
         string_candidates = ["__whole__"] if len(response) >= MIN_CHARS else []
@@ -85,10 +89,14 @@ def main() -> int:
         string_candidates = [
             key
             for key, value in response.items()
-            if key not in SKIP_KEYS and isinstance(value, str) and len(value) >= MIN_CHARS
+            if key not in SKIP_KEYS
+            and isinstance(value, str)
+            and len(value) >= MIN_CHARS
         ]
         array_candidates = [
-            key for key, value in response.items() if key not in SKIP_KEYS and is_string_array(value)
+            key
+            for key, value in response.items()
+            if key not in SKIP_KEYS and is_string_array(value)
         ]
     else:
         string_candidates = []