Merge remote-tracking branch 'origin/master' into create-pull-request/patch-1788655917

# Conflicts:
#	.claude/skills/hassio-addon-workflow/scripts/pr_review.sh

Co-authored-by: alexbelgium <44178713+alexbelgium@users.noreply.github.com>

.claude/skills/hassio-addon-workflow/references/traps.md

@@ -254,13 +254,38 @@ without your involvement — another reason a shared checkout goes stale mid-tas
 **Reviewers**: CodeRabbit (deepest — often runs scripts to prove a claim; reviews ~9 minutes
 after the PR opens, or on `@coderabbitai review`), chatgpt-codex-connector, Copilot, Codacy.
 
-**Codacy `action_required` is this repo's normal state.** Other open PRs show the same. It
+**Codacy is red on essentially every add-on PR and gates nothing.** `gh pr checks` reports it as
-exposes no annotations via the API, so its findings are only visible in the maintainer's Codacy
+`fail` (older runs showed `action_required`); #3019, #3044 and #3050 all merged with it failing,
-account. Note it and move on rather than guessing.
+and `master` carries no branch protection, so no check is required in the GitHub sense. It exposes
+no annotations via the API, so its findings are only visible in the maintainer's Codacy account.
+Note it and move on rather than guessing. `pr_review.sh watch` therefore prints it every poll but
+keeps it out of the verdict — the one check on that list, which is a denylist of known noise, not
+an allowlist of gates, so a job added to CI later counts as blocking until someone exempts it.
 
 **Resolving a review thread requires GraphQL** (`resolveReviewThread`); the REST API cannot do it.
 `scripts/pr_review.sh` wraps fetch / reply / resolve.
 
+**`gh pr checks` output is TAB-separated, and every blocking gate here has spaces in its name.**
+Parsing it with awk's default field splitting truncates each check to its first word and reads the
+wrong column as the state: `Codacy Static Code Analysis<TAB>fail` becomes `Codacy=Static`, and
+`Test addon build (wger)<TAB>pending` becomes `Test=addon`. A `case` over that string then matches
+neither `*fail*` nor `*pending*` and falls through to the "all passing" branch — the failure mode
+that makes a CI-reporting command lie. `pr_review.sh watch` called #3044 green while Codacy was
+red, and on #3042 printed "settled — all passing" while the HA add-on linter was failing; it would
+also have called a build that had not started a pass. Use `awk -F'\t'`, judge the state column
+alone (never the joined `name=state` text, or a check named `flaky-fail-detector` reads as a
+failure), and treat an unrecognised state as a failure instead of letting it reach the passing
+branch. Fixed in #3052.
+
+The TSV is gh's *non-TTY* renderer, which is what `$(gh pr checks ... | awk)` always gets; attached
+to a terminal the same command prints a coloured, aligned table with a summary line, so never
+sanity-check the format by eye in a shell and assume the script sees that. `gh pr checks --json`
+would be sturdier, and Copilot recommends it (#3052), but it does not exist before gh 2.36 and the
+add-on ships 2.23 — it fails with `unknown flag: --json`. The parse is therefore built to fail
+safe instead: states are allowlisted, so a header row would land in the failure branch and a
+space-aligned table would parse to zero rows and keep `watch` waiting. Either way it cannot
+return a false pass.
+
 **CHANGELOG heading dates are ISO, whatever the bots' defaults say.** Match the format already in
 the add-on's file. Repo-wide that is `## <version> (YYYY-MM-DD)`: 7705 dated headings against 363
 in `DD-MM-YYYY`, and the newest entry is ISO in 125 of 135 add-ons. Copilot flags an ISO file that

.claude/skills/hassio-addon-workflow/scripts/env_trace.sh

@@ -30,8 +30,14 @@ VAR="${1:?usage: env_trace.sh <VAR> [process-name-or-pid]}"
 TARGET="${2:-}"
 # VAR is interpolated into grep/sed patterns below — restrict it to a valid env var name
 case "$VAR" in
-    [A-Za-z_]*) [ -z "${VAR//[A-Za-z0-9_]/}" ] || { echo "invalid env var name: $VAR" >&2; exit 1; } ;;
+    [A-Za-z_]*) [ -z "${VAR//[A-Za-z0-9_]/}" ] || {
-    *) echo "invalid env var name: $VAR" >&2; exit 1 ;;
+        echo "invalid env var name: $VAR" >&2
+        exit 1
+    } ;;
+    *)
+        echo "invalid env var name: $VAR" >&2
+        exit 1
+        ;;
 esac
 
 echo "== tracing ${VAR} =="
@@ -39,7 +45,7 @@ echo
 
 echo "1. /data/options.json (the user's saved options)"
 if [ -f /data/options.json ]; then
-    python3 - "$VAR" <<'PY'
+    python3 - "$VAR" << 'PY'
 import json, sys
 var = sys.argv[1]
 try:
@@ -80,7 +86,8 @@ echo "3. s6 container_environment (only read by services using #!/usr/bin/with-c
 seen3=0
 for d in /var/run/s6/container_environment /run/s6/container_environment; do
     if [ -f "$d/$VAR" ]; then
-        echo "   $d/$VAR = [$(cat "$d/$VAR")]"; seen3=1
+        echo "   $d/$VAR = [$(cat "$d/$VAR")]"
+        seen3=1
     fi
 done
 [ "$seen3" -eq 0 ] && echo "   not present in either envdir"
@@ -122,8 +129,8 @@ else
                 done
             fi
             # What it was actually launched with beats any theory about its environment.
-            tr '\0' '\n' < "/proc/$pid/cmdline" 2> /dev/null | tail -n +2 |
+            tr '\0' '\n' < "/proc/$pid/cmdline" 2> /dev/null | tail -n +2 \
-                grep -iE "res|screen|${VAR}" | head -3 | sed 's/^/     argv: /'
+                | grep -iE "res|screen|${VAR}" | head -3 | sed 's/^/     argv: /'
         done
     fi
 fi

.claude/skills/hassio-addon-workflow/scripts/measure.sh

@@ -31,7 +31,7 @@ awk '{t+=$2} END{printf "  threads=%d\n", t}' <(ps -eo pid,nlwp --no-headers 2>
 echo
 echo "== per-process memory (top 20 by PSS) =="
 printf '  %-28s %8s %8s %8s\n' COMMAND RSS PSS PRIVATE
-python3 - "$OUT" <<'PY'
+python3 - "$OUT" << 'PY'
 import os, sys
 rows = []
 for pid in filter(str.isdigit, os.listdir('/proc')):
@@ -62,17 +62,17 @@ PY
 
 echo
 echo "== reserved-but-not-resident (lazy allocations, NOT leaks) =="
-ipcs -m 2>/dev/null | awk 'NR>3 && $5 ~ /^[0-9]+$/ && $5 > 50000000 {printf "  SysV shm %.0f MB (owner %s) — check Rss in /proc/<pid>/smaps before calling it used\n", $5/1048576, $3}'
+ipcs -m 2> /dev/null | awk 'NR>3 && $5 ~ /^[0-9]+$/ && $5 > 50000000 {printf "  SysV shm %.0f MB (owner %s) — check Rss in /proc/<pid>/smaps before calling it used\n", $5/1048576, $3}'
 
 echo
 echo "== CPU over ${SAMPLE}s (idle unless you are driving the UI) =="
 # utime+stime. Parsed after the LAST ')' because field 2 is (comm) and may contain spaces —
 # a plain $14+$15 is wrong for anything like 'npm exec @foo' and silently reports a fabricated
 # number rather than failing.
-jiffies() { awk -F') ' '{n=split($NF,a," "); print a[12]+a[13]}' "/proc/$1/stat" 2>/dev/null; }
+jiffies() { awk -F') ' '{n=split($NF,a," "); print a[12]+a[13]}' "/proc/$1/stat" 2> /dev/null; }
 
 # jiffies are USER_HZ units — almost always 100, but read it rather than assume it
-HZ=$(getconf CLK_TCK 2>/dev/null) && [ "$HZ" -gt 0 ] 2>/dev/null || HZ=100
+HZ=$(getconf CLK_TCK 2> /dev/null) && [ "$HZ" -gt 0 ] 2> /dev/null || HZ=100
 
 # Sample EVERY readable process, not the top-N of ps.txt: that list is sorted by RSS,
 # and the busiest process is not necessarily a big one.
@@ -86,14 +86,14 @@ for pid in "${!t0[@]}"; do
     [ -r "/proc/$pid/stat" ] || continue
     t1=$(jiffies "$pid") || continue
     [ -n "$t1" ] && [ -n "${t0[$pid]}" ] || continue
-    delta=$(( t1 - ${t0[$pid]} ))
+    delta=$((t1 - ${t0[$pid]}))
     [ "$delta" -gt 0 ] || continue
     pct=$(awk -v d="$delta" -v s="$SAMPLE" -v hz="$HZ" 'BEGIN{printf "%.2f", d*100/(hz*s)}')
-    comm=$(tr -d '\0' < "/proc/$pid/comm" 2>/dev/null)
+    comm=$(tr -d '\0' < "/proc/$pid/comm" 2> /dev/null)
     echo "$pct $pid $comm"
 done | sort -rn | head -12 | awk '{printf "  %6s%%  %-8s %s\n", $1, $2, $3}'
 
 echo
-echo "  established conns on :8082/:3000/:3001 = $(ss -tn 2>/dev/null | grep -cE 'ESTAB.*:(8082|3000|3001)')"
+echo "  established conns on :8082/:3000/:3001 = $(ss -tn 2> /dev/null | grep -cE 'ESTAB.*:(8082|3000|3001)')"
 echo "  (those are claude_desktop/webtop viewer ports; 0 here means CPU above is idle burn)"
 echo "  raw ps: $OUT/ps.txt"

.claude/skills/hassio-addon-workflow/scripts/pr_review.sh

@@ -8,6 +8,10 @@
 #   pr_review.sh resolve <PR> <THREAD_ID...|--all>   --all = every unresolved, asks first
 #   pr_review.sh watch   <PR> [minutes]        poll checks (run this backgrounded)
 #
+# watch exits 0 when every blocking check passed *or was skipped* — a PR touching no add-on
+# skips all three gates, and it says so — 1 on failure, 2 if it ran out of minutes. Codacy is
+# advisory here: printed every poll, excluded from the verdict.
+#
 # Reviewers seen here: coderabbitai (deepest; reviews ~9 min after open, or on
 # "@coderabbitai review"), chatgpt-codex-connector, Copilot, Codacy.
 #
@@ -21,7 +25,7 @@ REPO="${HASSIO_REPO:-}"
 [ -z "$REPO" ] && { echo "cannot determine repo; set HASSIO_REPO=owner/name" >&2; exit 1; }
 echo "repo: $REPO" >&2
 CMD="${1:-}"; PR="${2:-}"
-[ -z "$CMD" ] || [ -z "$PR" ] && { sed -n '2,16p' "$0" | sed 's/^# \?//'; exit 1; }
+[ -z "$CMD" ] || [ -z "$PR" ] && { sed -n '2,20p' "$0" | sed 's/^# \?//'; exit 1; }
 
 case "$CMD" in
 list)
@@ -90,25 +94,72 @@ resolve)
     ;;
 watch)
     MINS="${3:-180}"   # the addon build alone has taken ~3h; 20 was far too short
+    # Checks that are red on essentially every add-on PR here and gate nothing: master carries no
+    # branch protection, and #3019, #3044 and #3050 all merged with Codacy failing. They are kept
+    # out of the verdict but always printed, so the reader still sees them and can judge. This is
+    # deliberately a denylist of known noise, not an allowlist of blocking checks — a job added to
+    # CI later counts as blocking until someone puts it here on purpose.
+    ADVISORY_CHECKS="Codacy Static Code Analysis"   # one per line if more are ever added
     wfail=2            # not 0: running out of minutes with checks still pending is not a pass
+    c=""; bstates=""; adv=""
     for i in $(seq 1 "$MINS"); do
-        c=$(gh pr checks "$PR" 2> /dev/null | awk '{print $1"="$2}' | tr '\n' ' ')
+        # gh pr checks emits TAB-separated columns with no header when its output is not a TTY,
-        if [ -z "$c" ]; then
+        # which inside this $(... | awk) it never is. (Attached to a terminal it prints a wholly
+        # different ANSI table; --json would be sturdier still but does not exist before gh 2.36,
+        # and 2.23 ships here.) Every blocking gate has spaces in its name — "Addon linting
+        # (wger)", "Test addon build (wger)" — so awk's default separator split them on
+        # whitespace: "Codacy Static Code Analysis<TAB>fail" became "Codacy=Static" and the state
+        # column was never read at all. watch printed "all passing" on a red #3044 and on #3042
+        # with the linter failing, and could not see a pending build either.
+        # If that format ever does change, the allowlist below fails safe rather than passing: a
+        # header row lands in the failure branch, and a space-aligned table parses to no rows,
+        # which keeps watch waiting instead of returning 0.
+        rows=$(gh pr checks "$PR" 2> /dev/null | awk -F'\t' -v ADV="$ADVISORY_CHECKS" '
+            BEGIN { n = split(ADV, a, "\n"); for (j = 1; j <= n; j++) adv[a[j]] = 1 }
+            NF >= 2 { print (($1 in adv) ? "A" : "B") "\t" $1 "=" $2 "\t" $2 }')
+        if [ -z "$rows" ]; then
             # Normal in the first minutes after `gh pr create`, and also whenever gh errors.
             # Calling that "settled" would report success for checks that never ran.
             echo "[$i] no checks reported yet (gh returned nothing) — still waiting"
             sleep 60; continue
         fi
+        c=$(printf '%s\n' "$rows" | cut -f2 | tr '\n' ' ')
         echo "[$i] $c"
-        case "$c" in
+        # Judge the state column only, never the joined name=state line: a check whose NAME
-        *pending*) sleep 60 ;;
+        # contains "fail" must not read as a failure.
-        *fail* | *error* | *cancel*) echo "settled — with FAILURES (see above)"; wfail=1; break ;;
+        bstates=$(printf '%s\n' "$rows" | awk -F'\t' '$1 == "B" { print $3 }' | tr '\n' ' ')
-        *) echo "settled — all passing"; wfail=0; break ;;
+        adv=$(printf '%s\n' "$rows" | awk -F'\t' '$1 == "A" { print $2 }' | tr '\n' ' ')
+        if [ -z "$bstates" ]; then
+            echo "  only advisory checks have reported — no blocking check has run yet"
+            sleep 60; continue
+        fi
+        # Allowlist the good states rather than denylisting the bad ones: an unrecognised state
+        # must land in the failure branch, because falling through to "passing" is this command's
+        # worst outcome.
+        nbad=0; npend=0
+        for s in $bstates; do
+            case "$s" in
+            pass | skipping) ;;
+            pending) npend=$((npend + 1)) ;;
+            *) nbad=$((nbad + 1)) ;;
             esac
         done
+        if [ "$nbad" -gt 0 ]; then
+            echo "settled — blocking checks FAILED:"
+            printf '%s\n' "$rows" |
+                awk -F'\t' '$1 == "B" && $3 != "pass" && $3 != "skipping" && $3 != "pending" { print "    " $2 }'
+            wfail=1; break
+        elif [ "$npend" -gt 0 ]; then
+            sleep 60; continue
+        else
+            echo "settled — blocking checks passing"; wfail=0; break
+        fi
+    done
     [ "$wfail" -eq 2 ] && echo "gave up after ${MINS}m, checks still unsettled — NOT a pass"
+    # Printed on pass and on failure alike: it is excluded from the verdict, not hidden.
+    [ -n "$adv" ] && echo "  advisory (non-blocking, not counted in the verdict): $adv"
     # A PR touching no */config.* skips the CHANGELOG, linter and build jobs outright (#3018).
-    case "${c:-}" in *skipping*) echo "  ...of which some were SKIPPED — a skipped job tested nothing" ;; esac
+    case " $bstates " in *" skipping "*) echo "  ...of which some were SKIPPED — a skipped job tested nothing" ;; esac
     echo "note: long queues here are usually account runner contention, not your diff."
     exit "$wfail"
     ;;

.claude/skills/hassio-addon-workflow/scripts/preflight.sh

@@ -47,7 +47,10 @@ if [ -n "${BUILD_VERSION:-}" ]; then
     if [ -z "$SLUG" ] && [ -n "${HOSTNAME:-}" ]; then
         base=$(printf '%s' "$HOSTNAME" | sed 's/^[0-9a-f]\{8\}-//')
         for cand in "$(printf '%s' "$base" | tr '-' '_')" "$base"; do
-            [ -f "$REPO/$cand/config.yaml" ] && { SLUG="$cand"; break; }
+            [ -f "$REPO/$cand/config.yaml" ] && {
+                SLUG="$cand"
+                break
+            }
         done
         [ -z "$SLUG" ] && SLUG="$base"
     fi
@@ -69,8 +72,8 @@ if [ -n "${BUILD_VERSION:-}" ]; then
         else
             echo "  MISMATCH — this branch is NOT what is running."
             git fetch origin master --quiet 2> /dev/null
-            master=$(git show origin/master:"$SLUG/config.yaml" 2> /dev/null |
+            master=$(git show origin/master:"$SLUG/config.yaml" 2> /dev/null \
-                grep -E '^version:' | head -1 | tr -d "\"'" | awk '{print $2}')
+                | grep -E '^version:' | head -1 | tr -d "\"'" | awk '{print $2}')
             echo "  origin/master version = ${master:-unknown}"
             echo "  -> work from origin/master; analysing this branch will mislead you."
             echo

.claude/skills/hassio-addon-workflow/scripts/validate.sh

@@ -13,22 +13,31 @@ set -uo pipefail
 if root=$(git rev-parse --show-toplevel 2> /dev/null); then cd "$root" || exit 1; fi
 
 ADDON="${1:-}"
-[ "${ADDON:-}" = "--vs-master" ] && { ADDON=""; set -- --vs-master; }
+[ "${ADDON:-}" = "--vs-master" ] && {
+    ADDON=""
+    set -- --vs-master
+}
 VS_MASTER=false
 for a in "$@"; do [ "$a" = "--vs-master" ] && VS_MASTER=true; done
 
 if [ -z "$ADDON" ]; then
-    mapfile -t _dirs < <(git diff --name-only origin/master...HEAD 2> /dev/null |
+    mapfile -t _dirs < <(git diff --name-only origin/master...HEAD 2> /dev/null \
-        cut -d/ -f1 | sort -u | grep -vE '^\.' )
+        | cut -d/ -f1 | sort -u | grep -vE '^\.')
     if [ "${#_dirs[@]}" -gt 1 ]; then
         echo "several changed dirs: ${_dirs[*]}"
-        echo "pass one explicitly: validate.sh <addon-dir>"; exit 1
+        echo "pass one explicitly: validate.sh <addon-dir>"
+        exit 1
     fi
     ADDON="${_dirs[0]:-}"
 fi
-[ -z "$ADDON" ] && { echo "usage: validate.sh <addon-dir> [--vs-master]"; exit 1; }
+[ -z "$ADDON" ] && {
+    echo "usage: validate.sh <addon-dir> [--vs-master]"
+    exit 1
+}
 git rev-parse --verify origin/master > /dev/null 2>&1 || {
-    echo "origin/master missing — run: git fetch origin master"; exit 1; }
+    echo "origin/master missing — run: git fetch origin master"
+    exit 1
+}
 export PYTHONDONTWRITEBYTECODE=1
 echo "== validating $ADDON =="
 
@@ -36,14 +45,22 @@ fail=0
 note() { printf '  %-13s %s\n' "$1" "$2"; }
 # execline `run`/`finish` files are not shell (25 of them here, across 21 add-ons). Neither
 # linter below can read one, so anything either says about it is noise.
-is_execline() { local l; IFS= read -r l < "$1" 2> /dev/null; [[ $l == '#!'*execlineb* ]]; }
+is_execline() {
+    local l
+    IFS= read -r l < "$1" 2> /dev/null
+    [[ $l == '#!'*execlineb* ]]
+}
 
 # Shell: bash -n then shellcheck -x (follows sourced files, as CI does). One list for both.
 files=()
 while IFS= read -r f; do is_execline "$f" || files+=("$f"); done \
     < <(find "$ADDON" -type f \( -name '*.sh' -o -name 'run' -o -name 'finish' -o -name 'autostart' \) 2> /dev/null)
 for f in "${files[@]}"; do
-    if ! out=$(bash -n "$f" 2>&1); then note "bash -n" "FAIL $f"; echo "$out" | sed 's/^/      /'; fail=1; fi
+    if ! out=$(bash -n "$f" 2>&1); then
+        note "bash -n" "FAIL $f"
+        echo "$out" | sed 's/^/      /'
+        fail=1
+    fi
 done
 [ "$fail" -eq 0 ] && note "bash -n" "${#files[@]} file(s) checked"
 
@@ -65,13 +82,16 @@ command -v hadolint > /dev/null 2>&1 && [ -f "$ADDON/Dockerfile" ] && {
 
 if [ -f "$ADDON/config.yaml" ]; then
     # path passed as argv, never interpolated into Python source
-    python3 - "$ADDON/config.yaml" <<'PY' || { note "config.yaml" "FAIL parse"; fail=1; }
+    python3 - "$ADDON/config.yaml" << 'PY' || {
 import yaml,sys
 d=yaml.safe_load(open(sys.argv[1]))
 print('  %-13s ok (version=%s, %d options)' % ('config.yaml', d.get('version'), len(d.get('options') or {})))
 missing=[k for k in (d.get('options') or {}) if k not in (d.get('schema') or {})]
 if missing: print('  %-13s options with no schema entry: %s' % ('WARN', missing)); sys.exit(0)
 PY
+        note "config.yaml" "FAIL parse"
+        fail=1
+    }
     command -v yamllint > /dev/null 2>&1 && {
         yl=$(yamllint -f parsable "$ADDON/config.yaml" 2>&1 | grep -c .)
         note "yamllint" "$yl finding(s) (compare with --vs-master)"
@@ -79,7 +99,10 @@ PY
 fi
 
 while IFS= read -r f; do
-    python3 -m py_compile "$f" 2> /dev/null || { note "py_compile" "FAIL $f"; fail=1; }
+    python3 -m py_compile "$f" 2> /dev/null || {
+        note "py_compile" "FAIL $f"
+        fail=1
+    }
 done < <(find "$ADDON" -type f -name '*.py' 2> /dev/null)
 
 $VS_MASTER && command -v npx > /dev/null 2>&1 && [ -f "$ADDON/CHANGELOG.md" ] && {
@@ -96,7 +119,8 @@ if git diff --name-only origin/master...HEAD 2> /dev/null | grep -Fxq "$ADDON/CH
     note "CHANGELOG" "updated"
 else
     # This one IS gated: onpr_check-pr.yaml exits 1 without it.
-    note "CHANGELOG" "NOT UPDATED for $ADDON — CI hard-gates this"; fail=1
+    note "CHANGELOG" "NOT UPDATED for $ADDON — CI hard-gates this"
+    fail=1
 fi
 if git diff origin/master...HEAD -- "$ADDON/config.yaml" 2> /dev/null | grep -q '^+version:'; then
     note "version" "bumped"
@@ -110,7 +134,8 @@ note "docker build" "NOT tested locally (dockerd unavailable) — CI is the only
 if $VS_MASTER; then
     echo
     echo "== findings ADDED by this diff (pre-existing ones filtered out) =="
-    tmp=$(mktemp -d); trap 'rm -rf "$tmp"' EXIT
+    tmp=$(mktemp -d)
+    trap 'rm -rf "$tmp"' EXIT
     added=0
     # Fed by process substitution, not a pipe: a pipeline runs this in a subshell, where the
     # findings below could never reach $fail and the verdict would contradict the list.
@@ -125,14 +150,26 @@ if $VS_MASTER; then
         # cancel it out and report a false clean.
         case "$f" in
             *.sh | *autostart | */run | */finish)
-                command -v shellcheck > /dev/null 2>&1 || { echo "  $f: SKIPPED (shellcheck not installed)"; continue; }
+                command -v shellcheck > /dev/null 2>&1 || {
-                cmd() { shellcheck -x -f gcc "$1" 2>&1 | sed 's/^[^:]*:[0-9]*:[0-9]*://'; } ;;
+                    echo "  $f: SKIPPED (shellcheck not installed)"
+                    continue
+                }
+                cmd() { shellcheck -x -f gcc "$1" 2>&1 | sed 's/^[^:]*:[0-9]*:[0-9]*://'; }
+                ;;
             *.yaml | *.yml)
-                command -v yamllint > /dev/null 2>&1 || { echo "  $f: SKIPPED (yamllint not installed)"; continue; }
+                command -v yamllint > /dev/null 2>&1 || {
-                cmd() { yamllint -f parsable "$1" 2>&1 | sed 's/^[^:]*//; s/^:[0-9]*:[0-9]*//'; } ;;
+                    echo "  $f: SKIPPED (yamllint not installed)"
+                    continue
+                }
+                cmd() { yamllint -f parsable "$1" 2>&1 | sed 's/^[^:]*//; s/^:[0-9]*:[0-9]*//'; }
+                ;;
             *Dockerfile)
-                command -v hadolint > /dev/null 2>&1 || { echo "  $f: SKIPPED (hadolint not installed)"; continue; }
+                command -v hadolint > /dev/null 2>&1 || {
-                cmd() { hadolint "$1" 2>&1 | sed 's/^[^:]*//; s/^:[0-9]*//'; } ;;
+                    echo "  $f: SKIPPED (hadolint not installed)"
+                    continue
+                }
+                cmd() { hadolint "$1" 2>&1 | sed 's/^[^:]*//; s/^:[0-9]*//'; }
+                ;;
             *) continue ;;
         esac
         b=$(cmd "$tmp/base" | sort)
@@ -141,7 +178,8 @@ if $VS_MASTER; then
         [ -n "$new" ] && {
             echo "  $f: $(printf '%s\n' "$new" | grep -c .) NEW finding(s)"
             printf '%s\n' "$new" | sed 's/^/      /' | head -5
-            added=1; fail=1
+            added=1
+            fail=1
         }
     done < <(git diff --name-only origin/master...HEAD -- "$ADDON" 2> /dev/null)
     [ "$added" -eq 0 ] && echo "  (none — this diff introduced no new lint findings)"

.github/prompts/issue-classify.md

@@ -40,7 +40,7 @@ the check is a guard, not a common case.)
 ## Rule 1 — pick exactly one verdict
 
 | verdict | when |
-|---|---|
+| --- | --- |
 | `duplicate` | An existing open or closed issue reports the same thing. Set `duplicate_of`. |
 | `needs-info` | You cannot tell what is wrong without the add-on version, HA version, architecture, config, or the actual log output. |
 | `question` | A usage question answerable from `DOCS.md`, the wiki, or the add-on config. Not a defect. |

.github/prompts/issue-fix.md

@@ -39,7 +39,7 @@ rest are on you: nothing checks them, so breaking one ships silently.
    that value, and compare:
 
    | `version` vs `U` | what to do | example |
-   |---|---|---|
+   | --- | --- | --- |
    | identical | **append** `.1` | sonarr `4.0.19.3001` -> `4.0.19.3001.1` |
    | `U` + `.` + digits | **increment** those digits | radarr `6.3.0.10514.1` -> `6.3.0.10514.2` |
    | anything else | **leave it alone** | plex, readarr, joal |

.github/scripts/ai_guard_paths.sh

@@ -44,7 +44,7 @@ for pr in $PRS; do
         echo "$BAD"
         # Ensure the label exists before adding it — with set -e a missing
         # label would abort the whole loop and skip any PRs behind this one.
-        gh label create "ai:blocked" --repo "$REPO" --color ededed >/dev/null 2>&1 || true
+        gh label create "ai:blocked" --repo "$REPO" --color ededed > /dev/null 2>&1 || true
         gh pr ready "$pr" --repo "$REPO" --undo || true
         gh pr edit "$pr" --repo "$REPO" --add-label "ai:blocked"
         gh pr comment "$pr" --repo "$REPO" --body \

.github/scripts/ai_triage_context.sh

@@ -21,14 +21,17 @@ TITLE=$(jq -r '.title' "$OUT/issue.json")
 
 # ---------------------------------------------------------------- addon slug
 # Titles follow "🐛 [Immich Frame] ENV_VARS arent being picked up".
-RAW=$(sed -n 's/.*\[\([^]]*\)\].*/\1/p' <<<"$TITLE" | head -n1)
+RAW=$(sed -n 's/.*\[\([^]]*\)\].*/\1/p' <<< "$TITLE" | head -n1)
 ADDON=""
 if [ -n "$RAW" ]; then
-  CAND=$(tr '[:upper:] ' '[:lower:]_' <<<"$RAW")
+    CAND=$(tr '[:upper:] ' '[:lower:]_' <<< "$RAW")
     # Directory list without checking out any of them.
     git ls-tree -d --name-only HEAD > "$OUT/dirs.txt"
     for guess in "$CAND" "${CAND//_/-}" "${CAND//_/.}"; do
-    if grep -qxF "$guess" "$OUT/dirs.txt"; then ADDON="$guess"; break; fi
+        if grep -qxF "$guess" "$OUT/dirs.txt"; then
+            ADDON="$guess"
+            break
+        fi
     done
     # Separator-insensitive exact match: a title like "[Calibre-web]" (hyphen)
     # against a directory named calibre_web (underscore) matches neither exact
@@ -36,9 +39,12 @@ if [ -n "$RAW" ]; then
     # below, which picks the shorter "calibre" instead — the wrong add-on.
     # Stripping -, _, . from both sides before comparing catches this case.
     if [ -z "$ADDON" ]; then
-    CAND_STRIPPED=$(tr -d '_.-' <<<"$CAND")
+        CAND_STRIPPED=$(tr -d '_.-' <<< "$CAND")
         while IFS= read -r dir; do
-      if [ "$(tr -d '_.-' <<<"$dir")" = "$CAND_STRIPPED" ]; then ADDON="$dir"; break; fi
+            if [ "$(tr -d '_.-' <<< "$dir")" = "$CAND_STRIPPED" ]; then
+                ADDON="$dir"
+                break
+            fi
         done < "$OUT/dirs.txt"
     fi
     # Last resort: longest directory name contained in the candidate.
@@ -99,7 +105,7 @@ if [ -n "$ADDON" ]; then
 
             echo
             echo "## Recent commits touching ${ADDON}/"
-      git log -n 15 --date=short --pretty='- %ad %h %s' -- "$ADDON" 2>/dev/null || true
+            git log -n 15 --date=short --pretty='- %ad %h %s' -- "$ADDON" 2> /dev/null || true
         fi
     } >> "$CTX"
 fi
@@ -108,14 +114,14 @@ fi
 {
     echo
     echo "## Similar existing issues (candidate duplicates)"
-  KEYWORDS=$(tr -cs '[:alnum:]' ' ' <<<"$TITLE" \
+    KEYWORDS=$(tr -cs '[:alnum:]' ' ' <<< "$TITLE" \
         | tr '[:upper:]' '[:lower:]' \
         | tr ' ' '\n' | awk 'length($0)>3' | head -n6 | paste -sd' ')
     # Excludes the issue being triaged: if it's already indexed by GitHub search
     # by the time this runs, keyword overlap with its own title would otherwise
     # list it as a "candidate duplicate" of itself.
     gh search issues --repo "$REPO" --limit 15 \
-     --json number,title,state,url -- "$KEYWORDS" 2>/dev/null \
+        --json number,title,state,url -- "$KEYWORDS" 2> /dev/null \
         | jq -r --argjson self "$ISSUE_NUMBER" \
             '.[] | select(.number != $self) | "- #\(.number) [\(.state)] \(.title)"' \
         || echo "(search unavailable)"

.github/stargazer_countries.csv

@@ -418,6 +418,7 @@ KuchenKavalier,,2026-08-10
 KuerbisK,,2026-08-10
 Kvasenok,,2026-08-10
 KyleGolfer,,2026-08-10
+L00PERY,,2026-09-06
 L0rdShrek,Germany,
 L1nKinc,Germany,
 LaLaBer,,2026-08-10
@@ -444,6 +445,7 @@ LoginByCall,,2026-08-10
 Lolekpolek,,2026-08-10
 LonelySoul7X,,2026-08-10
 Loong-He,China,2026-08-30
+Loong-OvO,China,2026-09-06
 Lorsel,Italy,
 Luca2165801154,,2026-08-10
 Lucius-Waverly,,2026-08-16
@@ -1390,6 +1392,7 @@ flostingapplesauce,,2026-08-10
 flozi00,Germany,
 flue17,,2026-08-10
 fmcglinn,Australia,
+foodstampou812,United States,2026-09-06
 forming,,2026-08-10
 forreggbor,Hungary,
 foundbobby,United States,
@@ -1834,6 +1837,7 @@ m1kethai,Canada,
 m23l,,2026-08-10
 m2sh,"Iran, Islamic Republic of",
 m4rcSA,,2026-08-10
+m4rkolson,United States,2026-09-06
 mProwler,United States,
 mStrangers,,2026-08-10
 mabt,,2026-08-10
@@ -2085,6 +2089,7 @@ p0wertiger,Poland,
 paalwilliams,Germany,
 pace6666,,2026-08-10
 pafnow,France,
+pahanitsch,Germany,2026-09-06
 pandabreads,,2026-08-10
 pankaj151,India,
 papafrank66,,2026-08-10
@@ -2664,6 +2669,7 @@ yycsdm,,2026-08-10
 yyll2233,,2026-08-10
 z2833,,2026-08-10
 z307917424,,2026-08-10
+zacharee,Panama,2026-09-06
 zachgilliam,United States,
 zanyraspi,,2026-08-10
 zdaar,,2026-08-10

.templates/00-banner.sh

@@ -6,7 +6,7 @@ set -e
 # Banner
 # ======================================================================
 
-if ! bashio::supervisor.ping 2>/dev/null; then
+if ! bashio::supervisor.ping 2> /dev/null; then
     # Source standalone bashio first to provide function definitions
     if [ -f /usr/local/lib/bashio-standalone.sh ]; then
         source /usr/local/lib/bashio-standalone.sh
@@ -19,8 +19,8 @@ if ! bashio::supervisor.ping 2>/dev/null; then
     if [ ! -f /usr/bin/bashio ]; then
         cp -rf /usr/local/lib/bashio-standalone.sh /usr/bin/bashio
     fi
-    grep -rl "^#!.*bashio" /etc |
+    grep -rl "^#!.*bashio" /etc \
-    while IFS= read -r f; do
+        | while IFS= read -r f; do
             grep -qF "source /usr/local/lib/bashio-standalone.sh" "$f" && continue
             sed -i '1a source /usr/local/lib/bashio-standalone.sh' "$f"
         done
@@ -49,7 +49,7 @@ bashio::log.green ' Provided by: https://github.com/alexbelgium/hassio-addons '
 bashio::log.blue '-----------------------------------------------------------'
 
 # Adapt user abc
-if command -v id &>/dev/null && id abc &>/dev/null; then
+if command -v id &> /dev/null && id abc &> /dev/null; then
     if bashio::config.has_value "PUID" && bashio::config.has_value "PGID"; then
         PUID="$(bashio::config "PUID")"
         PGID="$(bashio::config "PGID")"

.templates/00-global_var.sh

@@ -152,15 +152,15 @@ if [[ "${1:-}" == "--self-test" ]]; then
         done
     fi
 
-    [[ "$self_test_rc" -eq 0 ]] &&
+    [[ "$self_test_rc" -eq 0 ]] \
-        echo "${#self_test_values[@]} values round-tripped unchanged (export block + dotenv)"
+        && echo "${#self_test_values[@]} values round-tripped unchanged (export block + dotenv)"
     exit "$self_test_rc"
 fi
 
 ################################################################################
 # Guard: only run inside Supervisor-managed add-ons
 ################################################################################
-if ! bashio::supervisor.ping 2>/dev/null; then
+if ! bashio::supervisor.ping 2> /dev/null; then
     echo "..."
     exit 0
 fi
@@ -179,7 +179,7 @@ ENV_FILE="/.env"
 ETC_ENV_FILE="/etc/environment"
 
 [[ -f "$JSONSOURCE" ]] || bashio::exit.nok "Missing $JSONSOURCE"
-command -v jq >/dev/null || bashio::exit.nok "jq is required"
+command -v jq > /dev/null || bashio::exit.nok "jq is required"
 
 mkdir -p /etc
 touch "$ETC_ENV_FILE"
@@ -193,7 +193,10 @@ SECRETSOURCE=""
 
 resolve_secret() {
     local v="$1" name line
-    [[ "$v" =~ ^[[:space:]]*\!secret[[:space:]]+(.+)$ ]] || { printf '%s' "$v"; return; }
+    [[ "$v" =~ ^[[:space:]]*\!secret[[:space:]]+(.+)$ ]] || {
+        printf '%s' "$v"
+        return
+    }
     name="${BASH_REMATCH[1]}"
     [[ -n "$SECRETSOURCE" ]] || bashio::exit.nok "Secrets not mounted"
 

.templates/00-smb_mounts.sh

@@ -4,7 +4,7 @@
 
 set -e
 
-if ! bashio::supervisor.ping 2>/dev/null; then
+if ! bashio::supervisor.ping 2> /dev/null; then
     bashio::log.blue "Disabled : please use another method"
     exit 0
 fi
@@ -33,16 +33,16 @@ test_mount() {
 
     _test_write() {
         local testfile="$mountpoint/.writetest_$$"
-    if : >"$testfile" 2>/dev/null; then
+        if : > "$testfile" 2> /dev/null; then
-      rm -f "$testfile" 2>/dev/null || true
+            rm -f "$testfile" 2> /dev/null || true
             return 0
         else
-      rm -f "$testfile" 2>/dev/null || true
+            rm -f "$testfile" 2> /dev/null || true
             return 1
         fi
     }
 
-  if _test_write 2>/dev/null; then
+    if _test_write 2> /dev/null; then
         MOUNTED=true
         return 0
     fi
@@ -53,9 +53,9 @@ test_mount() {
         echo "... retrying mount with noserverino"
         MOUNTOPTIONS="${orig_mountoptions},noserverino"
 
-    umount "$mountpoint" 2>/dev/null || true
+        umount "$mountpoint" 2> /dev/null || true
         if mount_drive "$MOUNTOPTIONS"; then
-      if _test_write 2>/dev/null; then
+            if _test_write 2> /dev/null; then
                 MOUNTED=true
                 return 0
             fi
@@ -66,9 +66,9 @@ test_mount() {
         echo "... retrying mount with noperm"
         MOUNTOPTIONS="${orig_mountoptions},noperm"
 
-    umount "$mountpoint" 2>/dev/null || true
+        umount "$mountpoint" 2> /dev/null || true
         if mount_drive "$MOUNTOPTIONS"; then
-      if _test_write 2>/dev/null; then
+            if _test_write 2> /dev/null; then
                 MOUNTED=true
                 return 0
             fi
@@ -88,9 +88,9 @@ mount_drive() {
     MOUNTOPTIONS="$1"
 
     if [[ "$FSTYPE" == "cifs" ]]; then
-    mount -t cifs -o "$MOUNTOPTIONS" "$disk" "/mnt/$diskname" 2>"$ERRORCODE_FILE" || MOUNTED=false
+        mount -t cifs -o "$MOUNTOPTIONS" "$disk" "/mnt/$diskname" 2> "$ERRORCODE_FILE" || MOUNTED=false
     elif [[ "$FSTYPE" == "nfs" ]]; then
-    mount -t nfs -o "$MOUNTOPTIONS" "$disk" "/mnt/$diskname" 2>"$ERRORCODE_FILE" || MOUNTED=false
+        mount -t nfs -o "$MOUNTOPTIONS" "$disk" "/mnt/$diskname" 2> "$ERRORCODE_FILE" || MOUNTED=false
     fi
 
     if [[ "$MOUNTED" == "true" ]]; then
@@ -106,7 +106,7 @@ retry_cifs_with_vers_ladder_on_dialect_failure() {
 
     local err mountpoint
     mountpoint="/mnt/$diskname"
-  err="$(cat "$ERRORCODE_FILE" 2>/dev/null || true)"
+    err="$(cat "$ERRORCODE_FILE" 2> /dev/null || true)"
 
     if echo "$err" | grep -Eq 'mount error\(13\)|Permission denied|NT_STATUS_(LOGON_FAILURE|ACCESS_DENIED)|STATUS_(LOGON_FAILURE|ACCESS_DENIED)'; then
         return 0
@@ -132,7 +132,7 @@ retry_cifs_with_vers_ladder_on_dialect_failure() {
         for vers in "${vers_variants[@]}"; do
             for sectry in "${sec_variants[@]}"; do
                 [[ "$MOUNTED" == "false" ]] || break
-        umount "$mountpoint" 2>/dev/null || true
+                umount "$mountpoint" 2> /dev/null || true
                 try_opts="${base_opts}${vopt},vers=${vers}${sectry}"
                 mount_drive "$try_opts"
             done
@@ -154,7 +154,7 @@ retry_cifs_with_vers_ladder_on_dialect_failure() {
             for vers in "${vers_variants2[@]}"; do
                 for sectry in "${sec_variants[@]}"; do
                     [[ "$MOUNTED" == "false" ]] || break
-          umount "$mountpoint" 2>/dev/null || true
+                    umount "$mountpoint" 2> /dev/null || true
                     try_opts="${base_opts}${vopt},vers=${vers}${sectry}"
                     mount_drive "$try_opts"
                 done
@@ -167,7 +167,7 @@ retry_cifs_with_vers_ladder_on_dialect_failure() {
             for vopt in "${opt_variants[@]}"; do
                 for vers in "${vers_variants2[@]}"; do
                     [[ "$MOUNTED" == "false" ]] || break
-          umount "$mountpoint" 2>/dev/null || true
+                    umount "$mountpoint" 2> /dev/null || true
                     try_opts="${base_opts}${vopt},vers=${vers},sec=ntlmssp"
                     mount_drive "$try_opts"
                 done
@@ -246,13 +246,13 @@ if bashio::config.has_value 'networkdisks'; then
         diskname="${diskname//\\//}"
         diskname="${diskname##*/}"
 
-    if mountpoint -q "/mnt/$diskname" 2>/dev/null; then
+        if mountpoint -q "/mnt/$diskname" 2> /dev/null; then
             bashio::log.warning "...... mount point /mnt/$diskname already in use (name collision for $disk). Skipping this share."
             continue
         fi
 
         ERRORCODE_FILE="/tmp/mount_error_${diskname//[^a-zA-Z0-9._-]/_}.log"
-    : >"$ERRORCODE_FILE" || true
+        : > "$ERRORCODE_FILE" || true
 
         MOUNTED=false
         CIFS_LADDER_ATTEMPTED=false
@@ -266,13 +266,13 @@ if bashio::config.has_value 'networkdisks'; then
         if [[ "$FSTYPE" == "cifs" ]]; then
             if [[ ! "$disk" =~ ^//[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+/.+ ]]; then
                 bashio::log.fatal "...... invalid CIFS path \"$disk\". Use //123.12.12.12/sharedfolder,//123.12.12.12/sharedfolder2"
-        echo "Invalid CIFS path structure: $disk" >"$ERRORCODE_FILE" || true
+                echo "Invalid CIFS path structure: $disk" > "$ERRORCODE_FILE" || true
                 continue
             fi
         else
             if [[ ! "$disk" =~ ^[^/:]+:/.+ ]]; then
                 bashio::log.fatal "...... invalid NFS path \"$disk\". Use server:/export/path or 123.12.12.12:/export/path"
-        echo "Invalid NFS path structure: $disk" >"$ERRORCODE_FILE" || true
+                echo "Invalid NFS path structure: $disk" > "$ERRORCODE_FILE" || true
                 continue
             fi
         fi
@@ -289,7 +289,7 @@ if bashio::config.has_value 'networkdisks'; then
                 if [[ -n "${CIFSDOMAIN:-}" ]]; then
                     printf 'domain=%s\n' "$CIFSDOMAIN"
                 fi
-      } >"$CRED_FILE"
+            } > "$CRED_FILE"
         fi
 
         if [[ "$FSTYPE" == "cifs" ]]; then
@@ -303,8 +303,8 @@ if bashio::config.has_value 'networkdisks'; then
 
         if [[ "$MOUNTED" == "false" ]]; then
             if [[ "$FSTYPE" == "cifs" ]]; then
-        if command -v nmap >/dev/null 2>&1; then
+                if command -v nmap > /dev/null 2>&1; then
-          output="$(nmap -F "$server" -T5 -oG - 2>/dev/null || true)"
+                    output="$(nmap -F "$server" -T5 -oG - 2> /dev/null || true)"
                     if ! echo "$output" | grep -q "445/open"; then
                         if echo "$output" | grep -q "/open"; then
                             bashio::log.fatal "...... $server is reachable but SMB port not opened, stopping script"
@@ -312,7 +312,7 @@ if bashio::config.has_value 'networkdisks'; then
                             bashio::log.fatal "...... fatal : $server not reachable, is it correct"
                         fi
                         cleanup_cred
-            rm -f "$ERRORCODE_FILE" 2>/dev/null || true
+                        rm -f "$ERRORCODE_FILE" 2> /dev/null || true
                         continue
                     fi
                     echo "...... $server is confirmed reachable"
@@ -320,13 +320,13 @@ if bashio::config.has_value 'networkdisks'; then
                     bashio::log.warning "...... nmap not available; skipping SMB port reachability test"
                 fi
 
-        if command -v smbclient >/dev/null 2>&1; then
+                if command -v smbclient > /dev/null 2>&1; then
                     OUTPUT="$(smbclient -t 2 -L "$server" -U "$USERNAME%$PASSWORD" -c "exit" $DOMAINCLIENT 2>&1 || true)"
 
                     if echo "$OUTPUT" | grep -q "LOGON_FAILURE"; then
                         bashio::log.fatal "...... incorrect Username, Password, or Domain! Script will stop."
                         cleanup_cred
-            rm -f "$ERRORCODE_FILE" 2>/dev/null || true
+                        rm -f "$ERRORCODE_FILE" 2> /dev/null || true
                         bashio::addon.stop
                     elif echo "$OUTPUT" | grep -q "tree connect failed" || echo "$OUTPUT" | grep -q "NT_STATUS_CONNECTION_DISCONNECTED"; then
                         echo "... using SMBv1"
@@ -344,8 +344,8 @@ if bashio::config.has_value 'networkdisks'; then
 
                 SMBRAW=""
                 SMB1_DETECTED=false
-        if command -v nmap >/dev/null 2>&1; then
+                if command -v nmap > /dev/null 2>&1; then
-          NMAP_OUTPUT="$(nmap --script smb-protocols -p 445 "$server" 2>/dev/null || true)"
+                    NMAP_OUTPUT="$(nmap --script smb-protocols -p 445 "$server" 2> /dev/null || true)"
                     SMBRAW="$(
                         echo "$NMAP_OUTPUT" \
                             | awk '/SMB2_DIALECT_/ {print $NF}' \
@@ -364,7 +364,7 @@ if bashio::config.has_value 'networkdisks'; then
                     302) SMBVERS=",vers=3.02" ;;
                     300) SMBVERS=",vers=3.0" ;;
                     210) SMBVERS=",vers=2.1" ;;
-          202|200) SMBVERS=",vers=2.0" ;;
+                    202 | 200) SMBVERS=",vers=2.0" ;;
                     *) SMBVERS="" ;;
                 esac
 
@@ -376,7 +376,7 @@ if bashio::config.has_value 'networkdisks'; then
 
                 if [[ -n "$SMBVERS" ]]; then
                     echo "...... SMB version detected : ${SMBVERS#,vers=}"
-        elif command -v smbclient >/dev/null 2>&1 && smbclient -t 2 -L "$server" -m NT1 -U "$USERNAME%$PASSWORD" $DOMAINCLIENT -c "exit" &>/dev/null; then
+                elif command -v smbclient > /dev/null 2>&1 && smbclient -t 2 -L "$server" -m NT1 -U "$USERNAME%$PASSWORD" $DOMAINCLIENT -c "exit" &> /dev/null; then
                     echo "...... SMB version : only SMBv1 is supported, this can lead to issues"
                     SECVERS=",sec=ntlm"
                     SMBVERS=",vers=1.0"
@@ -405,8 +405,8 @@ if bashio::config.has_value 'networkdisks'; then
                 fi
 
             else
-        if command -v nmap >/dev/null 2>&1; then
+                if command -v nmap > /dev/null 2>&1; then
-          output="$(nmap -F "$server" -T5 -oG - 2>/dev/null || true)"
+                    output="$(nmap -F "$server" -T5 -oG - 2> /dev/null || true)"
                     if ! echo "$output" | grep -Eq '(2049|111)/open'; then
                         bashio::log.fatal "...... $server is reachable but NFS ports not open"
                     fi
@@ -424,7 +424,7 @@ if bashio::config.has_value 'networkdisks'; then
 
         if [[ "$MOUNTED" == "true" ]]; then
             bashio::log.info "...... $disk successfully mounted to /mnt/$diskname with options ${MOUNTOPTIONS/$PASSWORD/XXXXXXXXXX}"
-      rm -f "$ERRORCODE_FILE" 2>/dev/null || true
+            rm -f "$ERRORCODE_FILE" 2> /dev/null || true
 
             if [[ "$FSTYPE" == "cifs" && "$MOUNTOPTIONS" == *"vers=1.0"* ]]; then
                 bashio::log.warning ""
@@ -437,14 +437,14 @@ if bashio::config.has_value 'networkdisks'; then
         elif [[ "$MOUNTED" == "readonly" ]]; then
             bashio::log.warning "...... $disk mounted to /mnt/$diskname but is READ-ONLY or not writable by UID/GID ${PUID#,uid=}:${PGID#,gid=}."
             bashio::log.warning "...... Check Samba share permissions, or try setting PUID/PGID to 0/0 (root), or adjust server ACLs."
-      rm -f "$ERRORCODE_FILE" 2>/dev/null || true
+            rm -f "$ERRORCODE_FILE" 2> /dev/null || true
             cleanup_cred
 
         else
             if [[ "$FSTYPE" == "cifs" ]]; then
                 bashio::log.fatal "Error, unable to mount $disk to /mnt/$diskname with username $USERNAME. Please check share path, username/password/domain; try UID/GID 0."
                 bashio::log.fatal "Here is some debugging info :"
-        if command -v smbclient >/dev/null 2>&1; then
+                if command -v smbclient > /dev/null 2>&1; then
                     smbclient -t 2 -L "$server" -U "$USERNAME%$PASSWORD" -c "exit" $DOMAINCLIENT || true
                 else
                     bashio::log.warning "smbclient not available; cannot print SMB debugging info"
@@ -459,13 +459,13 @@ if bashio::config.has_value 'networkdisks'; then
                 mount_drive "rw"
             fi
 
-      ERR_READ="$(cat "$ERRORCODE_FILE" 2>/dev/null || true)"
+            ERR_READ="$(cat "$ERRORCODE_FILE" 2> /dev/null || true)"
             bashio::log.fatal "Error read : ${ERR_READ:-unknown error}, addon will stop in 1 min"
 
-      umount "/mnt/$diskname" 2>/dev/null || true
+            umount "/mnt/$diskname" 2> /dev/null || true
-      rmdir "/mnt/$diskname" 2>/dev/null || true
+            rmdir "/mnt/$diskname" 2> /dev/null || true
             cleanup_cred
-      rm -f "$ERRORCODE_FILE" 2>/dev/null || true
+            rm -f "$ERRORCODE_FILE" 2> /dev/null || true
 
             bashio::addon.stop
         fi

.templates/01-config_yaml.sh

@@ -138,9 +138,9 @@ append_unique_line() {
     # $1=file, $2=line
     local _file="$1"
     local _line="$2"
-    mkdir -p "$(dirname "$_file")" 2>/dev/null || true
+    mkdir -p "$(dirname "$_file")" 2> /dev/null || true
-    touch "$_file" 2>/dev/null || true
+    touch "$_file" 2> /dev/null || true
-    grep -qxF -- "$_line" "$_file" 2>/dev/null || echo "$_line" >> "$_file"
+    grep -qxF -- "$_line" "$_file" 2> /dev/null || echo "$_line" >> "$_file"
 }
 
 while IFS= read -r line; do

.templates/01-custom_script.sh

@@ -11,14 +11,20 @@ pick_exec_dir() {
     for d in /dev/shm /run /var/run /mnt /root /; do
         if [ -d "$d" ] && [ -w "$d" ]; then
             local t="${d%/}/.exec_test_$$"
-      printf '#!/bin/sh\necho ok\n' >"$t" 2>/dev/null || { rm -f "$t" 2>/dev/null || true; continue; }
+            printf '#!/bin/sh\necho ok\n' > "$t" 2> /dev/null || {
-      chmod 700 "$t" 2>/dev/null || { rm -f "$t" 2>/dev/null || true; continue; }
+                rm -f "$t" 2> /dev/null || true
-      if "$t" >/dev/null 2>&1; then
+                continue
-        rm -f "$t" 2>/dev/null || true
+            }
+            chmod 700 "$t" 2> /dev/null || {
+                rm -f "$t" 2> /dev/null || true
+                continue
+            }
+            if "$t" > /dev/null 2>&1; then
+                rm -f "$t" 2> /dev/null || true
                 echo "$d"
                 return 0
             fi
-      rm -f "$t" 2>/dev/null || true
+            rm -f "$t" 2> /dev/null || true
         fi
     done
     return 1
@@ -90,7 +96,7 @@ validate_shebang() {
     local errfile msg
 
     # shellcheck disable=SC2206
-  local cmd=( $candidate )
+    local cmd=($candidate)
     local exe="${cmd[0]}"
 
     if [ ! -x "$exe" ]; then
@@ -103,18 +109,18 @@ validate_shebang() {
     {
         printf '#!%s\n' "$candidate"
         printf '%s\n' "$probe_script_content"
-  } >"$tmp"
+    } > "$tmp"
-  chmod 700 "$tmp" 2>/dev/null || true
+    chmod 700 "$tmp" 2> /dev/null || true
 
     set +e
-  out="$("$tmp" 2>"$errfile")"
+    out="$("$tmp" 2> "$errfile")"
     rc=$?
     set -e
 
-  rm -f "$tmp" 2>/dev/null || true
+    rm -f "$tmp" 2> /dev/null || true
 
     if [ "$rc" -eq 0 ] && [ -n "${out:-}" ] && [ "$out" != "null" ]; then
-    rm -f "$errfile" 2>/dev/null || true
+        rm -f "$errfile" 2> /dev/null || true
         return 0
     fi
 
@@ -126,7 +132,7 @@ validate_shebang() {
         msg+=$'   stderr: <empty>\n'
     fi
     SHEBANG_ERRORS+=("$msg")
-  rm -f "$errfile" 2>/dev/null || true
+    rm -f "$errfile" 2> /dev/null || true
     return 1
 }
 
@@ -147,7 +153,7 @@ if [ -z "$shebang" ]; then
     exit 1
 fi
 
-if ! command -v bashio::addon.version >/dev/null 2>&1; then
+if ! command -v bashio::addon.version > /dev/null 2>&1; then
     for f in /usr/lib/bashio/bashio.sh /usr/lib/bashio/lib.sh /usr/src/bashio/bashio.sh /usr/local/lib/bashio/bashio.sh /usr/local/lib/bashio-standalone.sh; do
         if [ -f "$f" ]; then
             # shellcheck disable=SC1090
@@ -162,7 +168,7 @@ fi
 ##################
 
 # Exit if /config is not mounted or HA not used
-if [ ! -d /config ] || ! bashio::supervisor.ping 2>/dev/null; then
+if [ ! -d /config ] || ! bashio::supervisor.ping 2> /dev/null; then
     echo "..."
     exit 0
 fi
@@ -195,7 +201,7 @@ if [ ! -f "$CONFIGSOURCE" ]; then
 fi
 
 # Convert scripts to linux
-dos2unix "$CONFIGSOURCE" >/dev/null 2>&1 || true
+dos2unix "$CONFIGSOURCE" > /dev/null 2>&1 || true
 chmod +x "$CONFIGSOURCE"
 
 if grep -q 'bashio' "$CONFIGSOURCE"; then

.templates/bashio-standalone.sh

@@ -46,7 +46,8 @@ _bashio_color() {
 }
 
 _bashio_log() {
-  local c="${1:-}"; shift || true
+    local c="${1:-}"
+    shift || true
     printf '%s%s%s\n' "$(_bashio_color "$c")" "$*" "$(_bashio_color reset)"
 }
 
@@ -55,7 +56,7 @@ _bashio_log() {
 # -----------------------------------------------------------------------------
 _bashio_is_true() {
     case "${1:-}" in
-    1|true|TRUE|True|yes|YES|Yes|on|ON|On) return 0 ;;
+        1 | true | TRUE | True | yes | YES | Yes | on | ON | On) return 0 ;;
         *) return 1 ;;
     esac
 }
@@ -99,7 +100,7 @@ _bashio_env_get() {
 _bashio_env_has() {
     local key="${1:-}"
     [ -n "$key" ] || return 1
-  _bashio_env_get "$key" >/dev/null 2>&1
+    _bashio_env_get "$key" > /dev/null 2>&1
 }
 
 # JSON options source (jq required). Prints value or empty; returns 0 always.
@@ -110,10 +111,10 @@ _bashio_json_get() {
     [ -n "$key" ] || return 0
     [ -n "$file" ] || return 0
     [ -f "$file" ] || return 0
-  command -v jq >/dev/null 2>&1 || return 0
+    command -v jq > /dev/null 2>&1 || return 0
 
     # getpath(split(".")) supports nested access; missing => empty
-  jq -er --arg k "$key" 'getpath(($k|split("."))) // empty' "$file" 2>/dev/null || true
+    jq -er --arg k "$key" 'getpath(($k|split("."))) // empty' "$file" 2> /dev/null || true
 }
 
 # Net wait using /dev/tcp with a timeout
@@ -124,7 +125,7 @@ _bashio_tcp_wait() {
     local start now
     start="$(date +%s)"
     while :; do
-    if exec 3<>"/dev/tcp/${host}/${port}" 2>/dev/null; then
+        if exec 3<> "/dev/tcp/${host}/${port}" 2> /dev/null; then
             exec 3>&- 3<&-
             return 0
         fi
@@ -138,10 +139,10 @@ _bashio_tcp_wait() {
 
 # Prefer nc if present, fallback to /dev/tcp
 _bashio_tcp_wait_nc() {
-  command -v nc >/dev/null 2>&1 || return 1
+    command -v nc > /dev/null 2>&1 || return 1
     local host="${1:-}" port="${2:-}" to="${3:-30}"
     # BusyBox and OpenBSD nc differ; cover both styles
-  nc -z -w "$to" "$host" "$port" 2>/dev/null || nc -z "$host" "$port" 2>/dev/null
+    nc -z -w "$to" "$host" "$port" 2> /dev/null || nc -z "$host" "$port" 2> /dev/null
 }
 
 # -----------------------------------------------------------------------------
@@ -173,7 +174,7 @@ bashio::supervisor.ping() {
 bashio::addon.name() { printf '%s' "${ADDON_NAME:-Standalone container}"; }
 bashio::addon.description() { printf '%s' "${ADDON_DESCRIPTION:-Running without Home Assistant Supervisor}"; }
 bashio::addon.version() { printf '%s' "${BUILD_VERSION:-1.0}"; }
-bashio::addon.version_latest(){ printf '%s' "${ADDON_VERSION_LATEST:-${BUILD_VERSION:-1.0}}"; }
+bashio::addon.version_latest() { printf '%s' "${ADDON_VERSION_LATEST:-${BUILD_VERSION:-1.0}}"; }
 
 bashio::addon.update_available() {
     if [ -n "${ADDON_VERSION_LATEST:-}" ] && [ "${ADDON_VERSION_LATEST:-}" != "${BUILD_VERSION:-}" ]; then
@@ -194,11 +195,11 @@ bashio::addon.port() {
     local arg="${1:-}"
     if [[ "$arg" =~ ^[0-9]+$ ]]; then
         local v=""
-    v="$(_bashio_env_get "PORT_${arg}" 2>/dev/null || true)"
+        v="$(_bashio_env_get "PORT_${arg}" 2> /dev/null || true)"
-    [ -z "$v" ] && v="$(_bashio_env_get "ADDON_PORT_${arg}" 2>/dev/null || true)"
+        [ -z "$v" ] && v="$(_bashio_env_get "ADDON_PORT_${arg}" 2> /dev/null || true)"
         printf '%s' "${v:-$arg}"
     else
-    printf '%s' "$(_bashio_env_get "$arg" 2>/dev/null || true)"
+        printf '%s' "$(_bashio_env_get "$arg" 2> /dev/null || true)"
     fi
 }
 
@@ -207,13 +208,13 @@ bashio::addon.option() {
     local key="${1:-}" value="${2-__BASHIO_UNSET__}" file="${STANDALONE_OPTIONS_JSON:-}"
     [ -n "$key" ] || return 0
 
-  if [ -n "$file" ] && [ -f "$file" ] && command -v jq >/dev/null 2>&1; then
+    if [ -n "$file" ] && [ -f "$file" ] && command -v jq > /dev/null 2>&1; then
         local tmp
         tmp="$(mktemp)"
         if [ "$value" = "__BASHIO_UNSET__" ]; then
-      jq --arg k "$key" 'delpath(($k|split(".")))' "$file" >"$tmp" && mv "$tmp" "$file"
+            jq --arg k "$key" 'delpath(($k|split(".")))' "$file" > "$tmp" && mv "$tmp" "$file"
         else
-      jq --arg k "$key" --arg v "$value" 'setpath(($k|split(".")); $v)' "$file" >"$tmp" && mv "$tmp" "$file"
+            jq --arg k "$key" --arg v "$value" 'setpath(($k|split(".")); $v)' "$file" > "$tmp" && mv "$tmp" "$file"
         fi
         return 0
     fi
@@ -238,7 +239,7 @@ bashio::info.operating_system() {
 }
 bashio::info.arch() { uname -m; }
 bashio::info.machine() { uname -m; }
-bashio::info.homeassistant(){ printf '%s' "standalone"; }
+bashio::info.homeassistant() { printf '%s' "standalone"; }
 bashio::info.supervisor() { printf '%s' "standalone"; }
 
 # -----------------------------------------------------------------------------
@@ -246,11 +247,14 @@ bashio::info.supervisor()  { printf '%s' "standalone"; }
 # -----------------------------------------------------------------------------
 bashio::config() {
     local key="${1:-}"
-  [ -n "$key" ] || { printf '%s' ""; return 0; }
+    [ -n "$key" ] || {
+        printf '%s' ""
+        return 0
+    }
 
     local v=""
-  if _bashio_env_get "$key" >/dev/null 2>&1; then
+    if _bashio_env_get "$key" > /dev/null 2>&1; then
-    v="$(_bashio_env_get "$key" 2>/dev/null || true)"
+        v="$(_bashio_env_get "$key" 2> /dev/null || true)"
     fi
     [ -z "$v" ] && v="$(_bashio_json_get "$key")"
     printf '%s' "${v:-}"
@@ -271,8 +275,8 @@ bashio::config.exists() {
         return 0
     fi
 
-  if [ -n "$file" ] && [ -f "$file" ] && command -v jq >/dev/null 2>&1; then
+    if [ -n "$file" ] && [ -f "$file" ] && command -v jq > /dev/null 2>&1; then
-    jq -e --arg k "$key" 'haspath(($k|split(".")))' "$file" >/dev/null 2>&1
+        jq -e --arg k "$key" 'haspath(($k|split(".")))' "$file" > /dev/null 2>&1
         return $?
     fi
 
@@ -293,8 +297,8 @@ bashio::config.array() {
     raw="$(bashio::config "$key")"
     [ -n "$raw" ] || return 0
 
-  if command -v jq >/dev/null 2>&1 && printf '%s' "$raw" | jq -e . >/dev/null 2>&1; then
+    if command -v jq > /dev/null 2>&1 && printf '%s' "$raw" | jq -e . > /dev/null 2>&1; then
-    printf '%s' "$raw" | jq -r '.[]' 2>/dev/null && return 0
+        printf '%s' "$raw" | jq -r '.[]' 2> /dev/null && return 0
     fi
 
     if printf '%s' "$raw" | grep -q ','; then
@@ -319,7 +323,7 @@ bashio::fs.file_exists()      { [ -f "${1:-}" ]; }
 bashio::fs.directory_exists() { [ -d "${1:-}" ]; }
 bashio::fs.file_contains() {
     local f="${1:-}" p="${2:-}"
-  [ -f "$f" ] && grep -q -- "$p" "$f" 2>/dev/null
+    [ -f "$f" ] && grep -q -- "$p" "$f" 2> /dev/null
 }
 
 # -----------------------------------------------------------------------------
@@ -336,16 +340,16 @@ bashio::net.wait_for() {
 bashio::dns.host() {
     local h="${1:-}"
     [ -n "$h" ] || return 1
-  if command -v getent >/dev/null 2>&1; then
+    if command -v getent > /dev/null 2>&1; then
         getent ahostsv4 "$h" | awk '{print $1; exit}'
     else
-    nslookup "$h" 2>/dev/null | awk '/^Address: /{print $2; exit}'
+        nslookup "$h" 2> /dev/null | awk '/^Address: /{print $2; exit}'
     fi
 }
 
 # Hostname
 bashio::host.hostname() {
-  command -v hostname >/dev/null 2>&1 && hostname || printf '%s' "${HOSTNAME:-unknown}"
+    command -v hostname > /dev/null 2>&1 && hostname || printf '%s' "${HOSTNAME:-unknown}"
 }
 
 # -----------------------------------------------------------------------------
@@ -356,7 +360,10 @@ bashio::host.hostname() {
 #   bashio::services.available "mqtt"
 bashio::services() {
     local svc="${1:-}" key="${2:-}"
-  [ -n "$svc" ] && [ -n "$key" ] || { printf '%s' ""; return 0; }
+    [ -n "$svc" ] && [ -n "$key" ] || {
+        printf '%s' ""
+        return 0
+    }
 
     local upper svc_upper var v=""
     upper="$(printf '%s' "$key" | tr '[:lower:]' '[:upper:]')"
@@ -369,15 +376,15 @@ bashio::services() {
         MQTT:USERNAME) var="MQTT_USER" ;;
         MQTT:PASSWORD) var="MQTT_PASSWORD" ;;
         MQTT:TLS) var="MQTT_TLS" ;;
-    MYSQL:HOST|MARIADB:HOST)         var="DB_HOST" ;;
+        MYSQL:HOST | MARIADB:HOST) var="DB_HOST" ;;
-    MYSQL:PORT|MARIADB:PORT)         var="DB_PORT" ;;
+        MYSQL:PORT | MARIADB:PORT) var="DB_PORT" ;;
-    MYSQL:USERNAME|MARIADB:USERNAME) var="DB_USER" ;;
+        MYSQL:USERNAME | MARIADB:USERNAME) var="DB_USER" ;;
-    MYSQL:PASSWORD|MARIADB:PASSWORD) var="DB_PASSWORD" ;;
+        MYSQL:PASSWORD | MARIADB:PASSWORD) var="DB_PASSWORD" ;;
-    MYSQL:DATABASE|MARIADB:DATABASE) var="DB_NAME" ;;
+        MYSQL:DATABASE | MARIADB:DATABASE) var="DB_NAME" ;;
         *) var="${svc_upper}_${upper}" ;;
     esac
 
-  v="$(_bashio_env_get "$var" 2>/dev/null || true)"
+    v="$(_bashio_env_get "$var" 2> /dev/null || true)"
     if [ -z "$v" ]; then
         v="$(_bashio_json_get "services.${svc}.${key}")"
         [ -z "$v" ] && v="$(_bashio_json_get "${svc}.${key}")"
@@ -402,15 +409,15 @@ bashio::cache.set()    { printf '%s' "${2:-}" > "$BASHIO_CACHE_DIR/${1}.cache";
 # -----------------------------------------------------------------------------
 # jq wrapper (some add-ons call bashio::jq)
 # -----------------------------------------------------------------------------
-bashio::jq() { command -v jq >/dev/null 2>&1 && jq "$@"; }
+bashio::jq() { command -v jq > /dev/null 2>&1 && jq "$@"; }
 
 # -----------------------------------------------------------------------------
 # Home Assistant token
 # -----------------------------------------------------------------------------
 bashio::homeassistant.token() {
     local t="${HOMEASSISTANT_TOKEN:-${HASS_TOKEN:-}}"
-  if [ -z "$t" ] && [ -n "${STANDALONE_OPTIONS_JSON:-}" ] && [ -f "${STANDALONE_OPTIONS_JSON:-}" ] && command -v jq >/dev/null 2>&1; then
+    if [ -z "$t" ] && [ -n "${STANDALONE_OPTIONS_JSON:-}" ] && [ -f "${STANDALONE_OPTIONS_JSON:-}" ] && command -v jq > /dev/null 2>&1; then
-    t="$(jq -er '.homeassistant.token // empty' "$STANDALONE_OPTIONS_JSON" 2>/dev/null || true)"
+        t="$(jq -er '.homeassistant.token // empty' "$STANDALONE_OPTIONS_JSON" 2> /dev/null || true)"
     fi
     printf '%s' "${t:-}"
 }
@@ -419,7 +426,11 @@ bashio::homeassistant.token() {
 # Exit helpers
 # -----------------------------------------------------------------------------
 bashio::exit.ok() { exit 0; }
-bashio::exit.nok() { local m="${1:-}"; [ -n "$m" ] && bashio::log.red "$m"; exit 1; }
+bashio::exit.nok() {
+    local m="${1:-}"
+    [ -n "$m" ] && bashio::log.red "$m"
+    exit 1
+}
 
 # -----------------------------------------------------------------------------
 # Core config check shim

.templates/ha_autoapps.sh

@@ -41,14 +41,14 @@ restore_apt_sources_if_missing() {
                 mirror="http://ports.ubuntu.com/ubuntu-ports"
                 security_mirror="$mirror"
             fi
-            cat > /etc/apt/sources.list <<EOF2
+            cat > /etc/apt/sources.list << EOF2
 deb ${mirror} ${codename} main restricted universe multiverse
 deb ${mirror} ${codename}-updates main restricted universe multiverse
 deb ${security_mirror} ${codename}-security main restricted universe multiverse
 EOF2
             ;;
         debian)
-            cat > /etc/apt/sources.list <<EOF2
+            cat > /etc/apt/sources.list << EOF2
 deb http://deb.debian.org/debian ${codename} main contrib non-free non-free-firmware
 deb http://deb.debian.org/debian ${codename}-updates main contrib non-free non-free-firmware
 deb http://deb.debian.org/debian-security ${codename}-security main contrib non-free non-free-firmware

.templates/ha_automatic_packages.sh

@@ -184,7 +184,7 @@ done
 if [ "$PACKMANAGER" = "apt" ]; then apt-get update > /dev/null; fi
 if [ "$PACKMANAGER" = "pacman" ]; then pacman -Sy > /dev/null; fi
 if [ "$PACKMANAGER" = "apk" ] && [ -f /etc/apk/repositories ] && ! grep -q "community" /etc/apk/repositories; then
-    ALPINE_VER=$(cat /etc/alpine-release 2>/dev/null | cut -d. -f1,2)
+    ALPINE_VER=$(cat /etc/alpine-release 2> /dev/null | cut -d. -f1,2)
     if [ -n "$ALPINE_VER" ]; then
         echo "https://dl-cdn.alpinelinux.org/alpine/v${ALPINE_VER}/community" >> /etc/apk/repositories
         apk update > /dev/null
@@ -228,7 +228,7 @@ for files in "/etc/services.d" "/etc/cont-init.d"; do
     if ! ls $files 1> /dev/null 2>&1; then continue; fi
 
     # Bashio
-    if grep -q -rnw "${files}" -e 'bashio' 2>/dev/null && [ ! -f "/usr/bin/bashio" ]; then
+    if grep -q -rnw "${files}" -e 'bashio' 2> /dev/null && [ ! -f "/usr/bin/bashio" ]; then
         [ "$VERBOSE" = true ] && echo "install bashio"
         BASHIO_VERSION="v0.17.5"
         mkdir -p /tmp/bashio

.templates/ha_entrypoint.sh

@@ -10,7 +10,7 @@ if [ "$$" -eq 1 ]; then
     PID1=true
     echo "Starting as entrypoint"
     if [ -d /command ]; then
-    ln -sf /command/* /usr/bin/ 2>/dev/null || true
+        ln -sf /command/* /usr/bin/ 2> /dev/null || true
     fi
 else
     echo "Starting custom scripts"
@@ -28,14 +28,20 @@ pick_exec_dir() {
         if [ -d "$d" ] && [ -w "$d" ]; then
             # Create a tiny test executable to confirm "exec" works
             local t="${d%/}/.exec_test_$$"
-      printf '#!/bin/sh\necho ok\n' >"$t" 2>/dev/null || { rm -f "$t" 2>/dev/null || true; continue; }
+            printf '#!/bin/sh\necho ok\n' > "$t" 2> /dev/null || {
-      chmod 700 "$t" 2>/dev/null || { rm -f "$t" 2>/dev/null || true; continue; }
+                rm -f "$t" 2> /dev/null || true
-      if "$t" >/dev/null 2>&1; then
+                continue
-        rm -f "$t" 2>/dev/null || true
+            }
+            chmod 700 "$t" 2> /dev/null || {
+                rm -f "$t" 2> /dev/null || true
+                continue
+            }
+            if "$t" > /dev/null 2>&1; then
+                rm -f "$t" 2> /dev/null || true
                 echo "$d"
                 return 0
             fi
-      rm -f "$t" 2>/dev/null || true
+            rm -f "$t" 2> /dev/null || true
         fi
     done
     return 1
@@ -109,7 +115,7 @@ validate_shebang() {
     local errfile msg
 
     # shellcheck disable=SC2206
-  local cmd=( $candidate )
+    local cmd=($candidate)
     local exe="${cmd[0]}"
 
     if [ ! -x "$exe" ]; then
@@ -122,18 +128,18 @@ validate_shebang() {
     {
         printf '#!%s\n' "$candidate"
         printf '%s\n' "$probe_script_content"
-  } >"$tmp"
+    } > "$tmp"
-  chmod 700 "$tmp" 2>/dev/null || true
+    chmod 700 "$tmp" 2> /dev/null || true
 
     set +e
-  out="$("$tmp" 2>"$errfile")"
+    out="$("$tmp" 2> "$errfile")"
     rc=$?
     set -e
 
-  rm -f "$tmp" 2>/dev/null || true
+    rm -f "$tmp" 2> /dev/null || true
 
     if [ "$rc" -eq 0 ] && [ -n "${out:-}" ] && [ "$out" != "null" ]; then
-    rm -f "$errfile" 2>/dev/null || true
+        rm -f "$errfile" 2> /dev/null || true
         return 0
     fi
 
@@ -145,7 +151,7 @@ validate_shebang() {
         msg+=$'   stderr: <empty>\n'
     fi
     SHEBANG_ERRORS+=("$msg")
-  rm -f "$errfile" 2>/dev/null || true
+    rm -f "$errfile" 2> /dev/null || true
     return 1
 }
 
@@ -209,14 +215,14 @@ if $PID1 && { [ -x /command/with-contenv ] || [ -x /usr/bin/with-contenv ]; }; t
     # accepts a surviving symlink-to-directory and would let the dump follow it. rm does not traverse
     # a symlink, but it would empty anything bind-mounted at this exact path -- not a configuration
     # any add-on uses, and not one s6 would tolerate either.
-  if rm -rf "$S6_CONTAINER_ENV" "$S6_CONTAINER_ENV.tmp" && mkdir -p "$S6_CONTAINER_ENV.tmp" &&
+    if rm -rf "$S6_CONTAINER_ENV" "$S6_CONTAINER_ENV.tmp" && mkdir -p "$S6_CONTAINER_ENV.tmp" \
-    s6-dumpenv -- "$S6_CONTAINER_ENV.tmp" && mv "$S6_CONTAINER_ENV.tmp" "$S6_CONTAINER_ENV"; then
+        && s6-dumpenv -- "$S6_CONTAINER_ENV.tmp" && mv "$S6_CONTAINER_ENV.tmp" "$S6_CONTAINER_ENV"; then
         echo "Populated $S6_CONTAINER_ENV for with-contenv"
     else
         # Leaves the directory absent, which is exactly how this fails today -- so the failure mode is
         # unchanged, not newly degraded. Never fatal, a read-only /run must still let the add-on boot,
         # but never silent either, since the shebang failure it leaves behind says nothing on its own.
-    rm -rf "$S6_CONTAINER_ENV" "$S6_CONTAINER_ENV.tmp" 2>/dev/null || true
+        rm -rf "$S6_CONTAINER_ENV" "$S6_CONTAINER_ENV.tmp" 2> /dev/null || true
         echo -e "\e[38;5;214m$(date) WARNING: could not populate $S6_CONTAINER_ENV; scripts with a with-contenv shebang will fail at their shebang, as they did before this was attempted\e[0m"
     fi
 fi
@@ -277,7 +283,7 @@ wait_for_supervisor() {
     [ -n "${SUPERVISOR_TOKEN:-}" ] || return 0
     [ "${BASHIO_LIB_FULL:-false}" = "true" ] || return 0
     # bashio's own curl carries no --max-time, so each attempt is bounded from the outside.
-  command -v timeout >/dev/null 2>&1 || return 0
+    command -v timeout > /dev/null 2>&1 || return 0
     # Digits only, then forced to base 10: `test -gt` accepts a zero-padded override like 08, but
     # arithmetic expansion reads it as octal and fails, which would leave the deadline empty and
     # spin the loop below forever.
@@ -305,7 +311,7 @@ wait_for_supervisor() {
         # logging is dropped because a failed attempt here is expected, not news.
         # shellcheck disable=SC2016
         if timeout "$attempt" bash -c '. "$1" && [ -n "$(bashio::addon.ip_address)" ]' \
-      _ "$BASHIO_LIB" >/dev/null 2>&1; then
+            _ "$BASHIO_LIB" > /dev/null 2>&1; then
             [ "$announced" -eq 0 ] || echo "Supervisor API ready after $((SECONDS - started))s"
             return 0
         fi
@@ -357,7 +363,7 @@ run_one_script() {
             _run_rc=0
             (
                 # shellcheck disable=SC1090
-        . "$BASHIO_LIB" 2>/dev/null || true
+                . "$BASHIO_LIB" 2> /dev/null || true
                 # shellcheck disable=SC1090
                 . "$script"
             ) || _run_rc=$?
@@ -397,7 +403,7 @@ if $PID1; then
                     _svc_rc=0
                     (
                         # shellcheck disable=SC1090
-            . "$BASHIO_LIB" 2>/dev/null || true
+                        . "$BASHIO_LIB" 2> /dev/null || true
                         # shellcheck disable=SC1090
                         . "$runfile"
                     ) || _svc_rc=$?
@@ -431,19 +437,19 @@ if $PID1; then
     terminate() {
         local local_pid
         echo "Termination signal received, forwarding to subprocesses..."
-    if command -v pgrep >/dev/null 2>&1; then
+        if command -v pgrep > /dev/null 2>&1; then
             while read -r pid; do
                 [ -n "$pid" ] || continue
                 echo "Terminating child PID $pid"
-        kill -TERM "$pid" 2>/dev/null || echo "Failed to terminate PID $pid"
+                kill -TERM "$pid" 2> /dev/null || echo "Failed to terminate PID $pid"
             done < <(pgrep -P "$$" || true)
         else
             for p in /proc/[0-9]*/; do
                 local_pid="${p#/proc/}"
                 local_pid="${local_pid%/}"
-        if [ "$local_pid" -ne 1 ] && grep -q "^PPid:[[:space:]]*$$" "/proc/$local_pid/status" 2>/dev/null; then
+                if [ "$local_pid" -ne 1 ] && grep -q "^PPid:[[:space:]]*$$" "/proc/$local_pid/status" 2> /dev/null; then
                     echo "Terminating child PID $local_pid"
-          kill -TERM "$local_pid" 2>/dev/null || echo "Failed to terminate PID $local_pid"
+                    kill -TERM "$local_pid" 2> /dev/null || echo "Failed to terminate PID $local_pid"
                 fi
             done
         fi

CLAUDE.md

@@ -147,7 +147,7 @@ manual actions with precedence. Prompts live in `.github/prompts/`, shared shell
 in `.github/scripts/`.
 
 | Workflow | Model | Trigger | Role |
-|---|---|---|---|
+| --- | --- | --- | --- |
 | `on_issues_ai_triage.yaml` | Sonnet-low | issue opened (+ author reply, daily catch-up) | Tier 1: classify, dedupe, answer, ask for info; label `ai-triage` for real add-on bugs |
 | `daily_ai_fix.yaml` | Opus 5-xhigh | daily 03:00 | Tier 2: diagnose the `ai-triage` batch; small+confident → ready PR (`ai:fixed`); else write a plan (`ai:plan-pending`) |
 | `on_issue_approved.yaml` | Opus 5-high | maintainer adds `ai:approved` | Tier 3: execute the approved plan → ready PR |
@@ -176,7 +176,7 @@ prompt-only, not machine-enforced.
 ## Linting Rules
 
 | Tool | Config | Key ignores |
-|------|--------|------------|
+| ------ | -------- | ------------ |
 | Hadolint | `.hadolint.yaml` | DL3002, DL3006-9, DL3018 (no pinning required) |
 | ShellCheck | `.shellcheckrc` | SC2002 |
 | Markdownlint | `.markdownlint.yaml` | MD013 (line length), MD025, MD033, MD041 |

addons_updater/README.md

@@ -75,7 +75,7 @@ You can add the following tags in the file :
 
 ### Addon version numbering
 
-The `version` written in the addon `config.yaml` is the one Home Assistant compares to decide whether an update is available. Home Assistant hides the update when it can order both versions and the new one is not strictly newer (`1.2.3` -> `1.2.3-2` is a semver pre-release, so it is *older*), and it cannot order tags such as `version-bf9e0b4f` or `ubuntu-2026-06-01` at all.
+The `version` written in the addon `config.yaml` is the one Home Assistant compares to decide whether an update is available. Home Assistant hides the update when it can order both versions and the new one is not strictly newer (`1.2.3` -> `1.2.3-2` is a semver pre-release, so it is _older_), and it cannot order tags such as `version-bf9e0b4f` or `ubuntu-2026-06-01` at all.
 
 The addon version is therefore derived from the upstream tag:
 

aurral/README.md

@@ -6,7 +6,7 @@ This addon is based on the docker image <https://github.com/lklynet/aurral>
 ## Configuration
 
 | Option | Default | Description |
-|---|---|---|
+| --- | --- | --- |
 | `download_folder` | `/share/aurral/downloads` | Path where Aurral writes flow downloads. Must be under `/share`. |
 | `weekly_flow_folder` | `weekly-flow` | Subfolder name appended to `download_folder` for weekly flow files. The full path will be `download_folder/weekly_flow_folder`. |
 

autobrr/README.md

@@ -67,7 +67,7 @@ Default credentials: `admin` / `password` (change after first login).
 ### Options
 
 | Option | Type | Default | Description |
-|--------|------|---------|-------------|
+| -------- | ------ | --------- | ------------- |
 | `PGID` | int | `0` | Group ID for file permissions |
 | `PUID` | int | `0` | User ID for file permissions |
 | `TZ` | str | | Timezone (e.g., `Europe/London`) |

bazarr/README.md

@@ -44,7 +44,7 @@ Configurations can be done through the app webUI, except for the following optio
 ### Options
 
 | Option | Type | Default | Description |
-|--------|------|---------|-------------|
+| -------- | ------ | --------- | ------------- |
 | `PGID` | int | `0` | Group ID for file permissions |
 | `PUID` | int | `0` | User ID for file permissions |
 | `TZ` | str | | Timezone (e.g., `Europe/London`) |

bentopdf/README.md

@@ -17,7 +17,7 @@ A privacy-first PDF toolkit running entirely in your browser — no uploads, no
 ### Organize & Edit
 
 | Tool | Tool | Tool |
-|------|------|------|
+| ------ | ------ | ------ |
 | Merge PDF | Split PDF | Organize PDF |
 | Delete Pages | Extract Pages | Reverse Pages |
 | Rotate PDF | Rotate Custom | Crop PDF |
@@ -28,7 +28,7 @@ A privacy-first PDF toolkit running entirely in your browser — no uploads, no
 ### Convert TO PDF
 
 | Tool | Tool | Tool |
-|------|------|------|
+| ------ | ------ | ------ |
 | Word to PDF | Excel to PDF | PowerPoint to PDF |
 | Image to PDF | JPG to PDF | PNG to PDF |
 | BMP to PDF | TIFF to PDF | WEBP to PDF |
@@ -44,7 +44,7 @@ A privacy-first PDF toolkit running entirely in your browser — no uploads, no
 ### Convert FROM PDF
 
 | Tool | Tool | Tool |
-|------|------|------|
+| ------ | ------ | ------ |
 | PDF to DOCX | PDF to Excel | PDF to JPG |
 | PDF to PNG | PDF to BMP | PDF to TIFF |
 | PDF to WEBP | PDF to SVG | PDF to Text |
@@ -54,7 +54,7 @@ A privacy-first PDF toolkit running entirely in your browser — no uploads, no
 ### Security & Metadata
 
 | Tool | Tool | Tool |
-|------|------|------|
+| ------ | ------ | ------ |
 | Encrypt PDF | Decrypt PDF | Change Permissions |
 | Remove Restrictions | Sign PDF | Digital Sign PDF |
 | Validate Signature | Edit Metadata | View Metadata |
@@ -64,7 +64,7 @@ A privacy-first PDF toolkit running entirely in your browser — no uploads, no
 ### Enhance & Process
 
 | Tool | Tool | Tool |
-|------|------|------|
+| ------ | ------ | ------ |
 | Compress PDF | OCR PDF | Deskew PDF |
 | Rasterize PDF | Linearize PDF | PDF to PDF/A |
 | Adjust Colors | Invert Colors | Text Color |
@@ -76,7 +76,7 @@ A privacy-first PDF toolkit running entirely in your browser — no uploads, no
 ### Forms & More
 
 | Tool | Tool | Tool |
-|------|------|------|
+| ------ | ------ | ------ |
 | Form Creator | Form Filler | Table of Contents |
 | Bookmark | PDF Editor | Extract Images |
 | Extract Tables | Extract Attachments | Edit Attachments |

birdnet-go-dev/rootfs/etc/cont-init.d/01-structure.sh

@@ -190,5 +190,5 @@ LOG_DIR="/config/logs"
 if [ -d "$LOG_DIR" ]; then
     bashio::log.info "Trimming log files older than ${LOG_MAX_AGE_DAYS} days in ${LOG_DIR}"
     ln -sf "$LOG_DIR" /logs
-    find "$LOG_DIR" -type f -name "*.log*" -mtime +"$LOG_MAX_AGE_DAYS" -delete 2>/dev/null || true
+    find "$LOG_DIR" -type f -name "*.log*" -mtime +"$LOG_MAX_AGE_DAYS" -delete 2> /dev/null || true
 fi

birdnet-go-dev/rootfs/etc/cont-init.d/33-mariadb.sh

@@ -44,8 +44,8 @@ if ! bashio::config.true 'mariadb_auto_config'; then
         # Only revert if config.yaml points at the HA MariaDB host we would have
         # written — a mysql block pointing at a different host was set manually.
         # shellcheck disable=SC2016
-        CURRENT_MYSQL_HOST="$(yq -r '.output.mysql.host // empty' "$CONFIG_LOCATION" 2>/dev/null || true)"
+        CURRENT_MYSQL_HOST="$(yq -r '.output.mysql.host // empty' "$CONFIG_LOCATION" 2> /dev/null || true)"
-        if yq -e '.output.mysql.enabled == true' "$CONFIG_LOCATION" >/dev/null 2>&1 \
+        if yq -e '.output.mysql.enabled == true' "$CONFIG_LOCATION" > /dev/null 2>&1 \
             && [ "${CURRENT_MYSQL_HOST}" = "${MYSQL_HOST}" ]; then
             yq -i -y \
                 '.output.mysql.enabled = false
@@ -71,7 +71,7 @@ bashio::log.green "---"
 # Resolve MariaDB hostname to IPv4: on HAOS >=17.3 the Supervisor network
 # gained IPv6, but the MariaDB addon only grants its user from the IPv4
 # subnet. Fall back to the raw hostname if resolution fails.
-MYSQL_HOST_RESOLVED="$(getent ahostsv4 "${MYSQL_HOST}" 2>/dev/null | awk '{print $1; exit}')"
+MYSQL_HOST_RESOLVED="$(getent ahostsv4 "${MYSQL_HOST}" 2> /dev/null | awk '{print $1; exit}')"
 MYSQL_HOST_RESOLVED="${MYSQL_HOST_RESOLVED:-${MYSQL_HOST}}"
 if [ "${MYSQL_HOST_RESOLVED}" != "${MYSQL_HOST}" ]; then
     bashio::log.blue "Resolved ${MYSQL_HOST} -> ${MYSQL_HOST_RESOLVED} (forcing IPv4)"

birdnet-go/CHANGELOG.md

@@ -22,8 +22,8 @@
 
 ## nightly-20260615-2 (05-07-2026)
 - Minor bugs fixed
- - Fix detections/database not persisting across restarts on a fresh install: upstream's default `config.yaml` ships `output.sqlite.path: birdnet.db` (relative) explicitly, so the missing-only (`//=`) seeding introduced previously never rewrote it to an absolute path. A relative path resolves against the app's ephemeral working directory, so the database was silently recreated empty on every restart. Any relative `output.sqlite.path` is now rewritten to live under the persistent `/config` on startup; values already set to an absolute path are left untouched. (https://github.com/tphakala/birdnet-go/discussions/3774)
+- Fix detections/database not persisting across restarts on a fresh install: upstream's default `config.yaml` ships `output.sqlite.path: birdnet.db` (relative) explicitly, so the missing-only (`//=`) seeding introduced previously never rewrote it to an absolute path. A relative path resolves against the app's ephemeral working directory, so the database was silently recreated empty on every restart. Any relative `output.sqlite.path` is now rewritten to live under the persistent `/config` on startup; values already set to an absolute path are left untouched. (https://github.com/tphakala/birdnet-go/discussions/3774)
- - MQTT auto-config now also enables BirdNET-Go's native Home Assistant MQTT auto-discovery: detection sensors appear in Home Assistant automatically with no manual YAML (existing UI/config.yaml edits are preserved)
+- MQTT auto-config now also enables BirdNET-Go's native Home Assistant MQTT auto-discovery: detection sensors appear in Home Assistant automatically with no manual YAML (existing UI/config.yaml edits are preserved)
 - MQTT auto-config seeds `realtime.mqtt.retain: true` (only when unset) so sensor states survive Home Assistant restarts
 - Added supervisor watchdog (tcp://[HOST]:[PORT:8080]) so the add-on is automatically restarted if BirdNET-Go stops responding
 - Added backup_exclude for rotated logs, making Home Assistant backups smaller (SQLite journals are kept so hot backups stay consistent)

birdnet-go/rootfs/etc/cont-init.d/01-structure.sh

@@ -186,5 +186,5 @@ LOG_DIR="/config/logs"
 if [ -d "$LOG_DIR" ]; then
     bashio::log.info "Trimming log files older than ${LOG_MAX_AGE_DAYS} days in ${LOG_DIR}"
     ln -sf "$LOG_DIR" /logs
-    find "$LOG_DIR" -type f -name "*.log*" -mtime +"$LOG_MAX_AGE_DAYS" -delete 2>/dev/null || true
+    find "$LOG_DIR" -type f -name "*.log*" -mtime +"$LOG_MAX_AGE_DAYS" -delete 2> /dev/null || true
 fi

birdnet-pi-zach/DOCS.md

@@ -9,9 +9,9 @@ Here are some example tests I did (the whole threads are really interesting also
 
 **My recommendation:**
 
-- **Best entry system (< 50 €):** Boya By-lm40 (30 €) + deadcat (10 €)
+- **Best entry system (< 50 €):** Boya By-lm40 (30 €) + deadcat (10 €)
-- **Best middle end system (< 150 €):** Clippy EM272 TRS/TRRS (55 €) + Rode AI micro trs/trrs to usb (70 €) + Rycote deadcat (27 €)
+- **Best middle end system (< 150 €):** Clippy EM272 TRS/TRRS (55 €) + Rode AI micro trs/trrs to usb (70 €) + Rycote deadcat (27 €)
-- **Best high end system (<400 €):** Clippy EM272 XLR (85 €) or LOM Ucho Pro (75 €) + Focusrite Scarlet 2i2 4th Gen (200 €) + Bubblebee Pro Extreme deadcat (45 €)
+- **Best high end system (<400 €):** Clippy EM272 XLR (85 €) or LOM Ucho Pro (75 €) + Focusrite Scarlet 2i2 4th Gen (200 €) + Bubblebee Pro Extreme deadcat (45 €)
 
 **Sources for high end microphones in Europe:**
 

birdnet-pi-zach/rootfs/helpers/birdnet_to_mqtt.py

@@ -112,6 +112,7 @@ def automatic_mqtt_publish(file, detection, path):
         mqttc.publish(mqtt_topic, json_bird, 1)
         log.info("Posted to MQTT: ok")
 
+
 # Create MQTT client using legacy callback API when available for
 # compatibility with paho-mqtt >= 2.0
 callback_api = getattr(mqtt, "CallbackAPIVersion", None)

birdnet-pi/DOCS.md

@@ -9,9 +9,9 @@ Here are some example tests I did (the whole threads are really interesting also
 
 **My recommendation:**
 
-- **Best entry system (< 50 €):** Boya By-lm40 (30 €) + deadcat (10 €)
+- **Best entry system (< 50 €):** Boya By-lm40 (30 €) + deadcat (10 €)
-- **Best middle end system (< 150 €):** Clippy EM272 TRS/TRRS (55 €) + Rode AI micro trs/trrs to usb (70 €) + Rycote deadcat (27 €)
+- **Best middle end system (< 150 €):** Clippy EM272 TRS/TRRS (55 €) + Rode AI micro trs/trrs to usb (70 €) + Rycote deadcat (27 €)
-- **Best high end system (<400 €):** Clippy EM272 XLR (85 €) or LOM Ucho Pro (75 €) + Focusrite Scarlet 2i2 4th Gen (200 €) + Bubblebee Pro Extreme deadcat (45 €)
+- **Best high end system (<400 €):** Clippy EM272 XLR (85 €) or LOM Ucho Pro (75 €) + Focusrite Scarlet 2i2 4th Gen (200 €) + Bubblebee Pro Extreme deadcat (45 €)
 
 **Sources for high end microphones in Europe:**
 

birdnet-pi/rootfs/helpers/birdnet_to_mqtt.py

@@ -112,6 +112,7 @@ def automatic_mqtt_publish(file, detection, path):
         mqttc.publish(mqtt_topic, json_bird, 1)
         log.info("Posted to MQTT: ok")
 
+
 # Create MQTT client using legacy callback API when available for
 # compatibility with paho-mqtt >= 2.0
 callback_api = getattr(mqtt, "CallbackAPIVersion", None)

birdnet-pipy/config.yaml

@@ -73,7 +73,7 @@ map:
 name: BirdNET-PiPy
 options:
   env_vars: []
-  ICECAST_PASSWORD: ''
+  ICECAST_PASSWORD: ""
   data_location: /config/data
 panel_icon: mdi:bird
 ports:

birdnet-pipy/rootfs/etc/cont-init.d/01-structure.sh

@@ -7,7 +7,7 @@ DATA_LOCATION="$(bashio::config 'data_location' || true)"
 DATA_LOCATION="${DATA_LOCATION:-$DEFAULT_LOCATION}"
 
 case "${DATA_LOCATION}" in
-  /config/*|/share/*|/data/*) ;;
+    /config/* | /share/* | /data/*) ;;
     *)
         bashio::log.warning "Invalid data_location '${DATA_LOCATION}', falling back to ${DEFAULT_LOCATION}"
         DATA_LOCATION="${DEFAULT_LOCATION}"
@@ -19,11 +19,11 @@ LEGACY2="/data"
 
 mkdir -p "${DATA_LOCATION}"
 
-if [ -z "$(ls -A "${DATA_LOCATION}" 2>/dev/null || true)" ]; then
+if [ -z "$(ls -A "${DATA_LOCATION}" 2> /dev/null || true)" ]; then
-  if [ -d "${LEGACY1}" ] && [ -n "$(ls -A "${LEGACY1}" 2>/dev/null || true)" ]; then
+    if [ -d "${LEGACY1}" ] && [ -n "$(ls -A "${LEGACY1}" 2> /dev/null || true)" ]; then
         bashio::log.notice "Migrating legacy data from ${LEGACY1} to ${DATA_LOCATION}"
         cp -a "${LEGACY1}/." "${DATA_LOCATION}/" || true
-  elif [ -d "${LEGACY2}" ] && [ "${LEGACY2}" != "${DATA_LOCATION}" ] && [ -n "$(ls -A "${LEGACY2}" 2>/dev/null || true)" ]; then
+    elif [ -d "${LEGACY2}" ] && [ "${LEGACY2}" != "${DATA_LOCATION}" ] && [ -n "$(ls -A "${LEGACY2}" 2> /dev/null || true)" ]; then
         bashio::log.notice "Migrating legacy data from ${LEGACY2} to ${DATA_LOCATION}"
         cp -a "${LEGACY2}/." "${DATA_LOCATION}/" || true
     fi

birdnet-pipy/rootfs/etc/cont-init.d/15-audio_perms.sh

@@ -3,20 +3,20 @@
 set -euo pipefail
 
 SND_GID=""
-if [ -e /dev/snd ] && command -v stat >/dev/null 2>&1; then
+if [ -e /dev/snd ] && command -v stat > /dev/null 2>&1; then
-  SND_GID="$(stat -c '%g' /dev/snd 2>/dev/null || true)"
+    SND_GID="$(stat -c '%g' /dev/snd 2> /dev/null || true)"
 fi
 
-if [ -n "${SND_GID}" ] && getent group audio >/dev/null 2>&1; then
+if [ -n "${SND_GID}" ] && getent group audio > /dev/null 2>&1; then
     current_gid="$(getent group audio | cut -d: -f3 || true)"
     if [ -n "${current_gid}" ] && [ "${current_gid}" != "${SND_GID}" ]; then
-    groupmod -g "${SND_GID}" audio 2>/dev/null || true
+        groupmod -g "${SND_GID}" audio 2> /dev/null || true
     fi
 fi
 
 for u in root nginx www-data icecast2; do
-  if id "${u}" >/dev/null 2>&1; then
+    if id "${u}" > /dev/null 2>&1; then
-    usermod -aG audio "${u}" 2>/dev/null || true
+        usermod -aG audio "${u}" 2> /dev/null || true
     fi
 done
 
@@ -30,7 +30,7 @@ if [ -n "${PULSE_SOCK}" ] && [ -S "${PULSE_SOCK}" ] && [ ! -S /run/pulse/native
 fi
 
 # Copy PulseAudio cookie for the icecast2 user so it can authenticate
-if id icecast2 >/dev/null 2>&1; then
+if id icecast2 > /dev/null 2>&1; then
     ICECAST_HOME="$(getent passwd icecast2 | cut -d: -f6)"
     if [ -n "${ICECAST_HOME}" ]; then
         for cookie in /config/.config/pulse/cookie /root/.config/pulse/cookie; do

bitwarden/rootfs/etc/s6-overlay/s6-rc.d/vaultwarden/run

@@ -21,19 +21,19 @@ export ROCKET_SECRET_KEY="${secret_key}"
 # Find the matching log level
 if bashio::config.has_value 'log_level'; then
     case "$(bashio::string.lower "$(bashio::config 'log_level')")" in
-        all|trace)
+        all | trace)
             log_level="trace"
             ;;
         debug)
             log_level="debug"
             ;;
-        info|notice)
+        info | notice)
             log_level="info"
             ;;
         warning)
             log_level="warn"
             ;;
-        error|fatal)
+        error | fatal)
             log_level="error"
             ;;
         off)

booksonic_air/README.md

@@ -64,7 +64,7 @@ Default credentials are shown in the startup logs.
 ### Options
 
 | Option | Type | Default | Description |
-|--------|------|---------|-------------|
+| -------- | ------ | --------- | ------------- |
 | `PGID` | int | `0` | Group ID for file permissions |
 | `PUID` | int | `0` | User ID for file permissions |
 | `TZ` | str | | Timezone (e.g., `Europe/London`) |

browser_chromium/rootfs/etc/cont-init.d/20-folders.sh

@@ -7,7 +7,6 @@ set -e
 PUID=$(bashio::config "PUID")
 PGID=$(bashio::config "PGID")
 
-
 # Create cache
 #mkdir -p /.cache
 #chmod 755 /.cache

browser_chromium/rootfs/etc/usr/bin/wrapped-chromium

@@ -42,7 +42,7 @@ args=(
 
 # Container reality: sandbox usually breaks unless seccomp is fully disabled
 if [[ "${seccomp_mode}" != "0" ]]; then
-  args+=( --no-sandbox --test-type )
+	args+=(--no-sandbox --test-type)
 fi
 
 # IMPORTANT:

calibre/README.md

@@ -62,7 +62,7 @@ Please read the upstream container documentation for further info: https://githu
 ### Options
 
 | Option | Type | Default | Description |
-|--------|------|---------|-------------|
+| -------- | ------ | --------- | ------------- |
 | `PGID` | int | `0` | Group ID for file permissions |
 | `PUID` | int | `0` | User ID for file permissions |
 | `TZ` | str | | Timezone (e.g., `Europe/London`) |

calibre_web/README.md

@@ -62,7 +62,7 @@ Default password: admin123
 ### Options
 
 | Option | Type | Default | Description |
-|--------|------|---------|-------------|
+| -------- | ------ | --------- | ------------- |
 | `PGID` | int | `0` | Group ID for file permissions |
 | `PUID` | int | `0` | User ID for file permissions |
 | `TZ` | str | | Timezone (e.g., `Europe/London`) |
@@ -99,7 +99,7 @@ This addon supports mounting both local drives and remote SMB shares:
 
 ### Optional Calibre-Web features
 
-Calibre-Web documents optional extras that a manual installation adds with `pip install calibreweb[metadata]` and similar. **You do not need to install anything here**: the LinuxServer base image this add-on builds on installs Calibre-Web's `requirements.txt` *and* its full `optional-requirements.txt` into the application's virtualenv, so the gdrive, gmail, goodreads, ldap, oauth, metadata, comics and kobo dependencies are all present already. Running `pip install calibreweb[...]` inside the container is not a supported way to enable them: it installs the PyPI distribution of Calibre-Web over an installation that already has those dependencies, and it can disturb the versions the base image pinned. It is also thrown away, because the Supervisor recreates the add-on container on restart.
+Calibre-Web documents optional extras that a manual installation adds with `pip install calibreweb[metadata]` and similar. **You do not need to install anything here**: the LinuxServer base image this add-on builds on installs Calibre-Web's `requirements.txt` _and_ its full `optional-requirements.txt` into the application's virtualenv, so the gdrive, gmail, goodreads, ldap, oauth, metadata, comics and kobo dependencies are all present already. Running `pip install calibreweb[...]` inside the container is not a supported way to enable them: it installs the PyPI distribution of Calibre-Web over an installation that already has those dependencies, and it can disturb the versions the base image pinned. It is also thrown away, because the Supervisor recreates the add-on container on restart.
 
 Optional features are switched on in the Calibre-Web web interface, not in the add-on options, under `Admin` -> `Basic Configuration` -> `Feature Configuration` (for example `Enable Uploads`, `Enable Kobo sync`, `Use Goodreads`).
 

calibre_web/rootfs/etc/cont-init.d/80-configuration.sh

@@ -30,16 +30,16 @@ else
     # duplicates it can leave behind are entries calibre-web skips or already trusts.
     # The column only exists once calibre-web 0.6.27+ has migrated app.db and cont-init runs
     # before calibre-web, so a failure here is not fatal : the next start applies it.
-    trusted_ips_error=$(sqlite3 /config/app.db "update settings set config_reverse_proxy_trusted_ips='127.0.0.1,::1,::ffff:127.0.0.1,172.30.32.0/23,::ffff:172.30.32.0/119,'||coalesce(config_reverse_proxy_trusted_ips,'') where coalesce(config_reverse_proxy_trusted_ips,'') not like '%::ffff:172.30.32.0/119%'" 2>&1) ||
+    trusted_ips_error=$(sqlite3 /config/app.db "update settings set config_reverse_proxy_trusted_ips='127.0.0.1,::1,::ffff:127.0.0.1,172.30.32.0/23,::ffff:172.30.32.0/119,'||coalesce(config_reverse_proxy_trusted_ips,'') where coalesce(config_reverse_proxy_trusted_ips,'') not like '%::ffff:172.30.32.0/119%'" 2>&1) \
-        bashio::log.warning "Could not set the ingress trusted ip list, it will be applied at next start (${trusted_ips_error})"
+        || bashio::log.warning "Could not set the ingress trusted ip list, it will be applied at next start (${trusted_ips_error})"
 
     # Calibre-web autodetects kepubify only while this setting is still NULL. On every install
     # that predates the Dockerfile fix above, that detection already ran, found nothing usable and
     # stored an empty string, so it is never retried. Put an empty value back to NULL and
     # calibre-web detects /opt/kepubify itself when it starts, a few seconds after this runs.
     # A path the user set by hand is not empty and is left alone.
-    kepubify_error=$(sqlite3 /config/app.db "update settings set config_kepubifypath = NULL where config_kepubifypath = ''" 2>&1) ||
+    kepubify_error=$(sqlite3 /config/app.db "update settings set config_kepubifypath = NULL where config_kepubifypath = ''" 2>&1) \
-        bashio::log.warning "Could not reset the kepubify path, it will be applied at next start (${kepubify_error})"
+        || bashio::log.warning "Could not reset the kepubify path, it will be applied at next start (${kepubify_error})"
 fi
 
 bashio::log.info "Default username:password is admin:admin123"

changedetection.io/README.md

@@ -52,7 +52,7 @@ You can add a shortcut pointing to your Changedetection.io instance with the fol
 ### Options
 
 | Option | Type | Default | Description |
-|--------|------|---------|-------------|
+| -------- | ------ | --------- | ------------- |
 | `PGID` | int | `0` | Group ID for file permissions |
 | `PUID` | int | `0` | User ID for file permissions |
 | `TZ` | str | | Timezone (e.g., `Europe/London`) |

claude_desktop/rootfs/defaults/autostart

@@ -55,7 +55,7 @@
 # shared memory into ordinary files for no benefit. If the size cannot be determined, keep the
 # flag — the crash it prevents is worse than the overhead it costs.
 SHM_FLAGS="--disable-dev-shm-usage"
-SHM_KB="$(df -k /dev/shm 2> /dev/null | awk 'NR==2 {print $2}')"
+SHM_KB="$(df -k /dev/shm 2>/dev/null | awk 'NR==2 {print $2}')"
 if [ -n "$SHM_KB" ] && [ "$SHM_KB" -ge 262144 ]; then
 	SHM_FLAGS=""
 fi

claude_desktop/rootfs/etc/cont-init.d/81-codex_cli.sh

@@ -141,7 +141,7 @@ release_info=""
 if curl -fsSL --retry 3 --retry-delay 2 --connect-timeout 10 --max-time 30 \
     -o "$release_metadata" "$CODEX_RELEASE_API"; then
     release_info="$(
-        CODEX_ASSET="$CODEX_ASSET" python3 - "$release_metadata" <<'PY' 2> /dev/null || true
+        CODEX_ASSET="$CODEX_ASSET" python3 - "$release_metadata" << 'PY' 2> /dev/null || true
 import json
 import os
 import re
@@ -249,7 +249,7 @@ fi
 {
     printf '#!/usr/bin/env bash\n'
     printf 'CODEX_REAL=%q\n' "$CODEX_REAL"
-    cat <<'SH'
+    cat << 'SH'
 RUNTIME_HOME="$(getent passwd abc | cut -d: -f6)"
 if [ -z "$RUNTIME_HOME" ]; then
     echo "codex: unable to resolve the abc runtime home" >&2
@@ -338,8 +338,7 @@ ln -sfn "$CODEX_BIN" "$CODEX_LINK"
 CODEX_SANDBOX_MODE="$(bashio::config 'codex_sandbox_mode' 'danger-full-access')"
 run_as_runtime_user mkdir -p "$RUNTIME_HOME/.codex"
 CODEX_SANDBOX_MODE="$CODEX_SANDBOX_MODE" RUNTIME_HOME="$RUNTIME_HOME" \
-    run_as_runtime_user python3 - <<'PY' \
+    run_as_runtime_user python3 - << 'PY' || bashio::log.warning "Unable to update the managed Codex configuration block"
-    || bashio::log.warning "Unable to update the managed Codex configuration block"
 import os
 import re
 import tomllib

claude_desktop/rootfs/etc/cont-init.d/82-claude_tools.sh

@@ -30,7 +30,7 @@ manage_claude_md_block() {
         fi
     elif [ -f "$CLAUDE_MD" ] && grep -qF "$begin" "$CLAUDE_MD"; then
         bashio::log.info "Removing ${name} guidance from CLAUDE.md"
-        CLAUDE_MD="$CLAUDE_MD" BLOCK_NAME="$name" python3 - <<'PY' || bashio::log.warning "Unable to remove the ${name} guidance automatically"
+        CLAUDE_MD="$CLAUDE_MD" BLOCK_NAME="$name" python3 - << 'PY' || bashio::log.warning "Unable to remove the ${name} guidance automatically"
 import os
 import re
 from pathlib import Path
@@ -58,7 +58,7 @@ PY
 manage_settings_hook() {
     # manage_settings_hook <event> <matcher> <command> <add|remove>
     HOOK_EVENT="$1" HOOK_MATCHER="$2" HOOK_COMMAND="$3" HOOK_ACTION="$4" \
-        python3 - <<'PY' || bashio::log.warning "Unable to update the $1 hook for '$3'"
+        python3 - << 'PY' || bashio::log.warning "Unable to update the $1 hook for '$3'"
 import json
 import os
 from pathlib import Path
@@ -389,14 +389,14 @@ bashio::log.info "MCP servers for Claude Desktop: ${MCP_SERVERS_DESKTOP}"
 bashio::log.info "MCP servers for Claude Code: ${MCP_SERVERS_CODE}"
 
 HEADROOM_ENABLED="$HEADROOM_ENABLED" HEADROOM_BIN="$(command -v headroom || echo headroom)" \
-    HEADROOM_HF_HOME="${HOME}/.headroom/hf" \
+HEADROOM_HF_HOME="${HOME}/.headroom/hf" \
-    TOKENSAVE_ENABLED="$TOKENSAVE_ENABLED" TOKENSAVE_BIN="$(command -v tokensave || echo tokensave)" \
+TOKENSAVE_ENABLED="$TOKENSAVE_ENABLED" TOKENSAVE_BIN="$(command -v tokensave || echo tokensave)" \
-    CODEX_ENABLED="$CODEX_ENABLED" CODEX_BIN="$CODEX_BIN" CODEX_SANDBOX_MODE="$CODEX_SANDBOX_MODE" \
+CODEX_ENABLED="$CODEX_ENABLED" CODEX_BIN="$CODEX_BIN" CODEX_SANDBOX_MODE="$CODEX_SANDBOX_MODE" \
-    HA_MCP_ENABLED="$HA_MCP_ENABLED" HA_MCP_URL="$HA_MCP_URL" HA_MCP_TOKEN="$HA_MCP_TOKEN" \
+HA_MCP_ENABLED="$HA_MCP_ENABLED" HA_MCP_URL="$HA_MCP_URL" HA_MCP_TOKEN="$HA_MCP_TOKEN" \
-    MCP_PROXY_BIN="$(command -v mcp-proxy || echo mcp-proxy)" \
+MCP_PROXY_BIN="$(command -v mcp-proxy || echo mcp-proxy)" \
-    MCP_SERVERS_DESKTOP="$MCP_SERVERS_DESKTOP" MCP_SERVERS_CODE="$MCP_SERVERS_CODE" \
+MCP_SERVERS_DESKTOP="$MCP_SERVERS_DESKTOP" MCP_SERVERS_CODE="$MCP_SERVERS_CODE" \
-    CLAUDE_DESKTOP_CONFIG="$CLAUDE_DESKTOP_CONFIG" CLAUDE_CODE_CONFIG="$CLAUDE_CODE_CONFIG" \
+CLAUDE_DESKTOP_CONFIG="$CLAUDE_DESKTOP_CONFIG" CLAUDE_CODE_CONFIG="$CLAUDE_CODE_CONFIG" \
-    python3 - <<'PY' || bashio::log.warning "Unable to update the MCP server registrations automatically"
+    python3 - << 'PY' || bashio::log.warning "Unable to update the MCP server registrations automatically"
 import json
 import os
 from pathlib import Path
@@ -607,7 +607,7 @@ PY
 # Guide Claude to actually use the Headroom compression tools so the MCP integration produces
 # real savings when transparent proxying is unavailable.
 if $HEADROOM_ENABLED; then
-    manage_claude_md_block headroom add <<'MD'
+    manage_claude_md_block headroom add << 'MD'
 ## Headroom context compression
 
 A local Headroom proxy (127.0.0.1:8787) backs the `headroom` MCP tools. To save context tokens:
@@ -636,7 +636,7 @@ if $HEADROOM_ENABLED && bashio::config.true 'headroom_wrap_claude_code'; then
 else
     HEADROOM_ROUTE_ACTION="remove"
 fi
-HEADROOM_ROUTE_ACTION="$HEADROOM_ROUTE_ACTION" python3 - <<'PY' || bashio::log.warning "Unable to manage the Claude Code proxy routing env"
+HEADROOM_ROUTE_ACTION="$HEADROOM_ROUTE_ACTION" python3 - << 'PY' || bashio::log.warning "Unable to manage the Claude Code proxy routing env"
 import json
 import os
 from pathlib import Path
@@ -703,7 +703,7 @@ manage_settings_hook PostToolUse "Bash|Grep|Glob|WebFetch" "$HEADROOM_HOOK_CMD"
 # Tell Claude Code that it can configure Home Assistant over the Core API via the shipped
 # `ha-cli` helper (no /config filesystem mount needed).
 if bashio::config.true 'enable_ha_api_helper'; then
-    manage_claude_md_block ha-api-helper add <<'MD'
+    manage_claude_md_block ha-api-helper add << 'MD'
 ## Configuring Home Assistant
 
 You can configure this Home Assistant instance through its Core API using the `ha-cli`
@@ -731,7 +731,7 @@ fi
 # Registering the MCP server is not enough on its own: without guidance the model rarely reaches
 # for a second agent, the same gap the Headroom block above exists to close.
 if $CODEX_ENABLED; then
-    manage_claude_md_block codex add <<'MD'
+    manage_claude_md_block codex add << 'MD'
 ## Delegating to ChatGPT Codex
 
 The `codex` MCP server runs OpenAI's Codex agent locally, signed in with the user's ChatGPT

claude_desktop/rootfs/etc/cont-init.d/83-claude_permissions.sh

@@ -19,7 +19,7 @@ esac
 # only while it still holds one of those managed values — a defaultMode the user set by hand
 # is never deleted. Ownership of the written file is reconciled by 84-claude_runtime_ownership.sh.
 mkdir -p "$(dirname "$SETTINGS_PATH")"
-PERMISSION_MODE="$PERMISSION_MODE" SETTINGS_PATH="$SETTINGS_PATH" python3 - <<'PY'
+PERMISSION_MODE="$PERMISSION_MODE" SETTINGS_PATH="$SETTINGS_PATH" python3 - << 'PY'
 import json
 import os
 from pathlib import Path

claude_desktop/rootfs/etc/cont-init.d/86-claude_safestorage.sh

@@ -36,7 +36,7 @@ fi
 # archive stays unpatched, so every later boot would retry under a new pid and strand another
 # copy until the container runs out of space.
 cleanup_tmp() {
-    find "$(dirname "$ASAR")" -maxdepth 1 -name ".$(basename "$ASAR").addon-tmp.*" -delete 2>/dev/null || true
+    find "$(dirname "$ASAR")" -maxdepth 1 -name ".$(basename "$ASAR").addon-tmp.*" -delete 2> /dev/null || true
 }
 
 if output=$(timeout 120 node "$PATCHER" "$ASAR" 2>&1); then

claude_desktop/rootfs/usr/local/bin/claude-tools-doctor.sh

@@ -45,7 +45,7 @@ if [ "$(bashio::config 'permission_mode')" = "bypass" ]; then
 fi
 
 section "Claude Code permission state"
-RUNTIME_HOME="$RUNTIME_HOME" python3 - <<'PY'
+RUNTIME_HOME="$RUNTIME_HOME" python3 - << 'PY'
 import json
 import os
 from pathlib import Path
@@ -66,7 +66,7 @@ else:
 PY
 
 section "MCP registrations (environment values redacted)"
-RUNTIME_HOME="$RUNTIME_HOME" python3 - <<'PY'
+RUNTIME_HOME="$RUNTIME_HOME" python3 - << 'PY'
 import json
 import os
 from pathlib import Path
@@ -104,7 +104,7 @@ for path in paths:
 PY
 
 section "Claude Code hooks"
-RUNTIME_HOME="$RUNTIME_HOME" python3 - <<'PY'
+RUNTIME_HOME="$RUNTIME_HOME" python3 - << 'PY'
 import json
 import os
 from pathlib import Path

claude_desktop/rootfs/usr/local/bin/ha-cli

@@ -96,7 +96,7 @@ def resolve_endpoint():
 def _url(base, path):
     path = path.lstrip("/")
     if path.startswith("api/"):
-        path = path[len("api/"):]
+        path = path[len("api/") :]
     return base.rstrip("/") + "/" + path
 
 
@@ -133,7 +133,9 @@ def rest(method, base, token, path, body=None):
     if body is not None:
         data = json.dumps(body).encode("utf-8")
         headers["Content-Type"] = "application/json"
-    req = urllib.request.Request(_url(base, path), data=data, method=method, headers=headers)
+    req = urllib.request.Request(
+        _url(base, path), data=data, method=method, headers=headers
+    )
     try:
         with urllib.request.urlopen(req, timeout=30) as resp:
             text = resp.read().decode("utf-8")
@@ -141,7 +143,9 @@ def rest(method, base, token, path, body=None):
         detail = exc.read().decode("utf-8", "replace").strip()
         sys.exit(f"ha-cli: HTTP {exc.code} {exc.reason} on {method} {path}\n{detail}")
     except urllib.error.URLError as exc:
-        sys.exit(f"ha-cli: cannot reach Home Assistant ({exc.reason}) on {method} {path}")
+        sys.exit(
+            f"ha-cli: cannot reach Home Assistant ({exc.reason}) on {method} {path}"
+        )
     try:
         return json.loads(text) if text.strip() else None
     except ValueError:
@@ -214,7 +218,9 @@ def main(argv):
             sys.exit("usage: ha-cli call <domain.service> [BODY]")
         domain, service = args[0].split(".", 1)
         body = _read_body(args[1]) if len(args) > 1 else None
-        _print(rest("POST", rest_base, token, f"services/{domain}/{service}", body or {}))
+        _print(
+            rest("POST", rest_base, token, f"services/{domain}/{service}", body or {})
+        )
     elif cmd == "states":
         path = f"states/{args[0]}" if args else "states"
         _print(rest("GET", rest_base, token, path))

claude_desktop/rootfs/usr/local/bin/headroom-posttooluse-compress.py

@@ -76,7 +76,11 @@ def main() -> int:
 
     # Find big string/array fields before paying the headroom import cost.
     def is_string_array(value):
-        return isinstance(value, list) and len(value) > ARRAY_KEEP and all(isinstance(v, str) for v in value)
+        return (
+            isinstance(value, list)
+            and len(value) > ARRAY_KEEP
+            and all(isinstance(v, str) for v in value)
+        )
 
     if isinstance(response, str):
         string_candidates = ["__whole__"] if len(response) >= MIN_CHARS else []
@@ -85,10 +89,14 @@ def main() -> int:
         string_candidates = [
             key
             for key, value in response.items()
-            if key not in SKIP_KEYS and isinstance(value, str) and len(value) >= MIN_CHARS
+            if key not in SKIP_KEYS
+            and isinstance(value, str)
+            and len(value) >= MIN_CHARS
         ]
         array_candidates = [
-            key for key, value in response.items() if key not in SKIP_KEYS and is_string_array(value)
+            key
+            for key, value in response.items()
+            if key not in SKIP_KEYS and is_string_array(value)
         ]
     else:
         string_candidates = []

cleanuparr/README.md

@@ -23,7 +23,7 @@ Integrations supported:
 ## Configuration
 
 | Option | Description |
-|--------|-------------|
+| -------- | ------------- |
 | `TZ` | Timezone (e.g. `Europe/Paris`). Defaults to `Europe/London`. |
 | `PUID` | User ID to run the process as. Defaults to `0` (root). |
 | `PGID` | Group ID to run the process as. Defaults to `0` (root). |

cleanuparr/config.yaml

@@ -1,8 +1,7 @@
 arch:
   - aarch64
   - amd64
-description:
+description: Automatically removes stuck and unwanted downloads from your *arr and download clients
-  Automatically removes stuck and unwanted downloads from your *arr and download clients
 devices:
   - /dev/dri
   - /dev/dri/card0

cleanuparr/rootfs/ha_entrypoint.sh

@@ -33,7 +33,7 @@ mkdir -p "$HA_DATA_DIR"
 # Symlink /app/config → HA persistent storage
 # The .NET app uses /app/config, NOT /config at the filesystem root
 if [ -d /app/config ] && [ ! -L /app/config ]; then
-    cp -rn /app/config/. "$HA_DATA_DIR/" 2>/dev/null || true
+    cp -rn /app/config/. "$HA_DATA_DIR/" 2> /dev/null || true
     rm -rf /app/config
 fi
 ln -sfn "$HA_DATA_DIR" /app/config

cloudcommander/README.md

@@ -40,7 +40,7 @@ Configurations can be done through the app webUI, except for the following optio
 ### Options
 
 | Option | Type | Default | Description |
-|--------|------|---------|-------------|
+| -------- | ------ | --------- | ------------- |
 | `CUSTOM_OPTIONS` | str | | Custom CLI options (e.g., `--name Homeassistant`) |
 | `DROPBOX_TOKEN` | str | | Dropbox integration token (see https://cloudcmd.io/) |
 | `localdisks` | str | | Local drives to mount (e.g., `sda1,sdb1,MYNAS`) |

cloudcommander/rootfs/etc/cont-init.d/99-run.sh

@@ -103,7 +103,7 @@ for candidate in "${cloudcmd_candidates[@]}"; do
     fi
 done
 
-if [ -z "$CLOUDCMD_BIN" ] && command -v cloudcmd >/dev/null 2>&1; then
+if [ -z "$CLOUDCMD_BIN" ] && command -v cloudcmd > /dev/null 2>&1; then
     CLOUDCMD_BIN=$(command -v cloudcmd)
 fi
 

codex/README.md

@@ -62,7 +62,7 @@ You can place the user folder from the theme/skeleton in /share/codex/www/user,
 ## Options
 
 | Option | Description | Default | Example |
-|--------|-------------|---------|---------|
+| -------- | ------------- | --------- | --------- |
 | `PGID` | Group ID for file permissions | `0` | `1000` |
 | `PUID` | User ID for file permissions | `0` | `1000` |
 | `TZ` | Timezone in long format | - | `America/Los_Angeles` |

collabora/README.md

@@ -51,7 +51,7 @@ Webui can be found at `https://homeassistant:9980/browser/dist/admin/admin.html`
 ### Options
 
 | Option | Type | Default | Description |
-|--------|------|---------|-------------|
+| -------- | ------ | --------- | ------------- |
 | `aliasgroup1` | str | | External address of the **Nextcloud** server allowed to use this Collabora (e.g. `https://nextcloud_domain\.com:443`) |
 | `aliasgroup2` | str | | A second Nextcloud server, same format as `aliasgroup1` |
 | `aliasgroup3` | str | | A third Nextcloud server, same format as `aliasgroup1` |

comicarr/README.md

@@ -30,7 +30,7 @@ database.
 ## Configuration
 
 | Option | Description |
-|--------|-------------|
+| -------- | ------------- |
 | `PUID` / `PGID` | Ownership applied to the add-on configuration directory. Defaults to `0` (root). See the note below before changing it. |
 | `TZ` | Timezone, e.g. `Europe/Paris`. |
 | `localdisks` | Local disks to mount, e.g. `sda1` or a disk label. |