Add gosu dependency and bump social_to_mealie version

.github/stargazer_countries.csv

@@ -529,7 +529,6 @@ Romain7495,France
 RooomKL,
 Rosemajor,
 Rosscoer,
-RosutoHane,
 Roth-Development,
 RouNNdeL,Poland
 RubenKelevra,Germany
@@ -1243,12 +1242,10 @@ glgghit,Italy
 gli-james-roland,
 glxzander,
 gmariotti,Germany
-gmeinerc,
 gnusma,
 goetzc,United States
 goldendatahub,
 goliat931,
-golichwer,Poland
 gonghailink,
 gooman69,
 goooroooX,
@@ -1276,7 +1273,6 @@ hAxxelS,
 ha48653,
 habiwan,
 habuild,
-hafstaf,
 hank-droid,
 hankalf,
 hans99,Sweden
@@ -1389,7 +1385,6 @@ jfields87,
 jfroy,United States
 jgoakley,United States
 jhhbe,
-jhron,
 jiadongjiang,
 jimmyang1992,
 jine,Sweden
@@ -1636,7 +1631,6 @@ michaeljvirkus-commits,
 michaelkuty,Czechia
 michaelomm,Australia
 michalgabor,
-michalklabnik,
 michelangelonz,
 michele84,
 micsco,United Kingdom
@@ -1703,7 +1697,6 @@ mytire,United States
 nacbooth,United Kingdom
 najdias,Portugal
 nalditopr,
-nana4rider,Japan
 naor1,Israel
 nate-marshall,
 nduest,Germany
@@ -1794,7 +1787,6 @@ paszczaq,Poland
 patpadgett,United States
 patrickcarmichael,United States
 patricklucescu,
-paulcgt,South Africa
 pavelekpl,
 pax,
 paxlo,

.github/workflows/onpush_builder.yaml

@@ -115,7 +115,7 @@ jobs:
     strategy:
       matrix:
         addon: ${{ fromJSON(needs.detect-changed-addons.outputs.changedAddons) }}
-        arch: ["aarch64", "amd64"]
+        arch: ["aarch64", "amd64", "armv7"]
     steps:
       - uses: actions/checkout@v6
       - name: Resolve Symlinks (in repo)
@@ -169,7 +169,17 @@ jobs:
         with:
           registry: ghcr.io
           username: ${{ github.repository_owner }}
-          password: ${{ secrets.GITHUB_TOKEN }} 
+          password: ${{ secrets.GITHUB_TOKEN }}
+      - name: Free disk space (runner)
+        uses: endersonmenezes/free-disk-space@v3
+        with:
+          remove_android: true
+          remove_dotnet: true
+          remove_haskell: true
+          remove_tool_cache: true
+          remove_swap: true
+          rm_cmd: "rmz"
+          rmz_version: "3.1.1"       
       - name: Build ${{ matrix.addon }} add-on (attempt 1)
         id: builderstep1
         if: steps.check.outputs.build_arch == 'true' && steps.dockerfile_check.outputs.has_dockerfile == 'true'

.templates/ha_automatic_packages.sh

@@ -237,10 +237,9 @@ for files in "/etc/services.d" "/etc/cont-init.d"; do
     # Bashio
     if grep -q -rnw "$files/" -e 'bashio' && [ ! -f "/usr/bin/bashio" ]; then
         [ "$VERBOSE" = true ] && echo "install bashio"
-        BASHIO_VERSION="latest"
+        BASHIO_VERSION="0.14.3"
         mkdir -p /tmp/bashio
-        BASHIO_TAG="$(curl -f -L -s -S "https://api.github.com/repos/hassio-addons/bashio/releases/${BASHIO_VERSION}" | awk -F '\"' '/tag_name/{print $4; exit}')"
-        curl -f -L -s -S "https://github.com/hassio-addons/bashio/archive/${BASHIO_TAG}.tar.gz" | tar -xzf - --strip 1 -C /tmp/bashio
+        curl -f -L -s -S "https://github.com/hassio-addons/bashio/archive/v${BASHIO_VERSION}.tar.gz" | tar -xzf - --strip 1 -C /tmp/bashio
         mv /tmp/bashio/lib /usr/lib/bashio
         ln -s /usr/lib/bashio/bashio /usr/bin/bashio
         rm -rf /tmp/bashio

README.md

@@ -56,7 +56,7 @@ If you want to do add the repository manually, please follow the procedure highl
 
 ### Number of addons
 
-- In the repository : 118
+- In the repository : 116
 - Installed : 76650
 
 ### Top 3
@@ -253,14 +253,6 @@ If you want to do add the repository manually, please follow the procedure highl
 ![aarch64][aarch64-badge]
 ![amd64][amd64-badge]
 
-✓ ![image](https://api.iconify.design/mdi/file-search.svg) [FileBrowser Quantum](filebrowser_quantum/) : FileBrowser Quantum provides a modern, responsive file manager with multi-source support, advanced authentication options, and realtime indexing for your Home Assistant files.
-
-  ![Version](https://img.shields.io/badge/dynamic/yaml?label=Version&query=%24.version&url=https%3A%2F%2Fraw.githubusercontent.com%2Falexbelgium%2Fhassio-addons%2Fmaster%2Ffilebrowser_quantum%2Fconfig.yaml)
-![Update](https://img.shields.io/badge/dynamic/json?label=Updated&query=%24.last_update&url=https%3A%2F%2Fraw.githubusercontent.com%2Falexbelgium%2Fhassio-addons%2Fmaster%2Ffilebrowser_quantum%2Fupdater.json)
-![aarch64][aarch64-badge]
-![amd64][amd64-badge]
-![ingress][ingress-badge]
-
 ✓ ![image](https://api.iconify.design/mdi/file-search.svg) [Filebrowser (10195x)](filebrowser/) : filebrowser provides a file managing interface within a specified directory and it can be used to upload, delete, preview, rename and edit your files
 
   ![Version](https://img.shields.io/badge/dynamic/yaml?label=Version&query=%24.version&url=https%3A%2F%2Fraw.githubusercontent.com%2Falexbelgium%2Fhassio-addons%2Fmaster%2Ffilebrowser%2Fconfig.yaml)
@@ -736,13 +728,6 @@ If you want to do add the repository manually, please follow the procedure highl
 ![aarch64][aarch64-badge]
 ![amd64][amd64-badge]
 
-✓  [Social to Mealie](social_to_mealie/) : Import recipes from social media directly into Mealie
-
-  ![Version](https://img.shields.io/badge/dynamic/yaml?label=Version&query=%24.version&url=https%3A%2F%2Fraw.githubusercontent.com%2Falexbelgium%2Fhassio-addons%2Fmaster%2Fsocial_to_mealie%2Fconfig.yaml)
-![Update](https://img.shields.io/badge/dynamic/json?label=Updated&query=%24.last_update&url=https%3A%2F%2Fraw.githubusercontent.com%2Falexbelgium%2Fhassio-addons%2Fmaster%2Fsocial_to_mealie%2Fupdater.json)
-![aarch64][aarch64-badge]
-![amd64][amd64-badge]
-
 ✓ ![image](https://api.iconify.design/mdi/television-classic.svg) [Sonarr](sonarr/) : Can monitor multiple RSS feeds for new episodes of your favorite shows and will grab, sort and rename them
 
   ![Version](https://img.shields.io/badge/dynamic/yaml?label=Version&query=%24.version&url=https%3A%2F%2Fraw.githubusercontent.com%2Falexbelgium%2Fhassio-addons%2Fmaster%2Fsonarr%2Fconfig.yaml)
@@ -817,13 +802,6 @@ If you want to do add the repository manually, please follow the procedure highl
 ![aarch64][aarch64-badge]
 ![amd64][amd64-badge]
 
-✓  [Vaultwarden](bitwarden/) : Open source password management solution
-
-  ![Version](https://img.shields.io/badge/dynamic/yaml?label=Version&query=%24.version&url=https%3A%2F%2Fraw.githubusercontent.com%2Falexbelgium%2Fhassio-addons%2Fmaster%2Fbitwarden%2Fconfig.yaml)
-![Update](https://img.shields.io/badge/dynamic/json?label=Updated&query=%24.last_update&url=https%3A%2F%2Fraw.githubusercontent.com%2Falexbelgium%2Fhassio-addons%2Fmaster%2Fbitwarden%2Fupdater.json)
-![aarch64][aarch64-badge]
-![amd64][amd64-badge]
-
 ✓ ![image](https://api.iconify.design/mdi/monitor.svg) [Webtop KDE](webtop_kde/) : Full linux desktop environment accessible via any modern web browser
 
   ![Version](https://img.shields.io/badge/dynamic/yaml?label=Version&query=%24.version&url=https%3A%2F%2Fraw.githubusercontent.com%2Falexbelgium%2Fhassio-addons%2Fmaster%2Fwebtop_kde%2Fconfig.yaml)
@@ -915,6 +893,13 @@ If you want to do add the repository manually, please follow the procedure highl
 ![aarch64][aarch64-badge]
 ![amd64][amd64-badge]
 
+✓  [zzz_archived - Vaultwarden](zzz_archived_bitwarden/) : Deprecated - please use community version
+
+  ![Version](https://img.shields.io/badge/dynamic/yaml?label=Version&query=%24.version&url=https%3A%2F%2Fraw.githubusercontent.com%2Falexbelgium%2Fhassio-addons%2Fmaster%2Fzzz_archived_bitwarden%2Fconfig.yaml)
+![Update](https://img.shields.io/badge/dynamic/json?label=Updated&query=%24.last_update&url=https%3A%2F%2Fraw.githubusercontent.com%2Falexbelgium%2Fhassio-addons%2Fmaster%2Fzzz_archived_bitwarden%2Fupdater.json)
+![aarch64][aarch64-badge]
+![amd64][amd64-badge]
+
 ✓  [zzz_archived : Code-server (VScode)](zzz_archived_code-server/) : Deprecated : Code-server is VS Code running on a remote server, accessible through the browser
 
   ![Version](https://img.shields.io/badge/dynamic/yaml?label=Version&query=%24.version&url=https%3A%2F%2Fraw.githubusercontent.com%2Falexbelgium%2Fhassio-addons%2Fmaster%2Fzzz_archived_code-server%2Fconfig.yaml)

bitwarden/Dockerfile

@@ -1,168 +0,0 @@
-#============================#
-#  ALEXBELGIUM'S DOCKERFILE  #
-#============================#
-#           _.------.
-#       _.-`    ('>.-`"""-.
-# '.--'`       _'`   _ .--.)
-#    -'         '-.-';`   `
-#    ' -      _.'  ``'--.
-#        '---`    .-'""`
-#               /`
-#=== Home Assistant Addon ===#
-
-#################
-# 1 Build Image #
-#################
-
-ARG BUILD_FROM=ghcr.io/hassio-addons/debian-base:9.1.0
-###############################################################################
-# Get prebuild containers from Vaultwarden
-###############################################################################
-FROM "vaultwarden/server:latest" AS vaultwarden
-
-###############################################################################
-# Build the actual add-on.
-###############################################################################
-# hadolint ignore=DL3006
-FROM ${BUILD_FROM}
-
-# Set shell
-SHELL ["/bin/bash", "-o", "pipefail", "-c"]
-
-# Get the Bitwarden from official images
-COPY --from=vaultwarden /vaultwarden /opt/vaultwarden
-COPY --from=vaultwarden /web-vault /opt/web-vault
-
-RUN \
-    apt-get update \
-    \
-    && apt-get install -y --no-install-recommends \
-        libmariadb-dev-compat \
-        libpq5 \
-        nginx \
-        sqlite3 \
-    && apt-get clean \
-    && rm -f -r \
-        /etc/nginx \
-    \
-    && mkdir -p /var/log/nginx \
-    && touch /var/log/nginx/error.log
-
-##################
-# 2 Modify Image #
-##################
-
-# Set S6 wait time
-ENV S6_CMD_WAIT_FOR_SERVICES=1 \
-    S6_CMD_WAIT_FOR_SERVICES_MAXTIME=0 \
-    S6_SERVICES_GRACETIME=0
-
-##################
-# 3 Install apps #
-##################
-
-# Add rootfs
-COPY rootfs/ /
-
-RUN chmod +x /etc/s6-overlay/s6-rc.d/*/run
-
-# Uses /bin for compatibility purposes
-# hadolint ignore=DL4005
-RUN if [ ! -f /bin/sh ] && [ -f /usr/bin/sh ]; then ln -s /usr/bin/sh /bin/sh; fi && \
-    if [ ! -f /bin/bash ] && [ -f /usr/bin/bash ]; then ln -s /usr/bin/bash /bin/bash; fi
-
-# Modules
-ARG MODULES="00-banner.sh 01-custom_script.sh"
-
-# Automatic modules download
-ADD "https://raw.githubusercontent.com/alexbelgium/hassio-addons/master/.templates/ha_automodules.sh" "/ha_automodules.sh"
-RUN chmod 744 /ha_automodules.sh && /ha_automodules.sh "$MODULES" && rm /ha_automodules.sh
-
-# Manual apps
-ENV PACKAGES=""
-
-# Automatic apps & bashio
-ADD "https://raw.githubusercontent.com/alexbelgium/hassio-addons/master/.templates/ha_autoapps.sh" "/ha_autoapps.sh"
-RUN chmod 744 /ha_autoapps.sh && /ha_autoapps.sh "$PACKAGES" && rm /ha_autoapps.sh
-
-################
-# 4 Entrypoint #
-################
-
-# Add entrypoint
-ENV S6_STAGE2_HOOK=/ha_entrypoint.sh
-ADD "https://raw.githubusercontent.com/alexbelgium/hassio-addons/master/.templates/ha_entrypoint.sh" "/ha_entrypoint.sh"
-
-# Entrypoint modifications
-ADD "https://raw.githubusercontent.com/alexbelgium/hassio-addons/master/.templates/ha_entrypoint_modif.sh" "/ha_entrypoint_modif.sh"
-RUN chmod 777 /ha_entrypoint.sh /ha_entrypoint_modif.sh && /ha_entrypoint_modif.sh && rm /ha_entrypoint_modif.sh
-
-# Standalone bashio command
-ADD "https://raw.githubusercontent.com/alexbelgium/hassio-addons/master/.templates/bashio-standalone.sh" "/.bashio-standalone.sh"
-RUN chmod 777 /.bashio-standalone.sh
-
-#
-#WORKDIR /
-#ENTRYPOINT [ "/usr/bin/env" ]
-#CMD [ "/ha_entrypoint.sh" ]
-#SHELL ["/bin/bash", "-o", "pipefail", "-c"]
-
-############
-# 5 Labels #
-############
-
-ARG BUILD_ARCH
-ARG BUILD_DATE
-ARG BUILD_DESCRIPTION
-ARG BUILD_NAME
-ARG BUILD_REF
-ARG BUILD_REPOSITORY
-ARG BUILD_VERSION
-ENV BUILD_VERSION="${BUILD_VERSION}"
-LABEL \
-    io.hass.name="${BUILD_NAME}" \
-    io.hass.description="${BUILD_DESCRIPTION}" \
-    io.hass.arch="${BUILD_ARCH}" \
-    io.hass.type="addon" \
-    io.hass.version=${BUILD_VERSION} \
-    maintainer="alexbelgium (https://github.com/alexbelgium)" \
-    org.opencontainers.image.title="${BUILD_NAME}" \
-    org.opencontainers.image.description="${BUILD_DESCRIPTION}" \
-    org.opencontainers.image.vendor="Home Assistant Add-ons" \
-    org.opencontainers.image.authors="alexbelgium (https://github.com/alexbelgium)" \
-    org.opencontainers.image.licenses="MIT" \
-    org.opencontainers.image.url="https://github.com/alexbelgium" \
-    org.opencontainers.image.source="https://github.com/${BUILD_REPOSITORY}" \
-    org.opencontainers.image.documentation="https://github.com/${BUILD_REPOSITORY}/blob/main/README.md" \
-    org.opencontainers.image.created=${BUILD_DATE} \
-    org.opencontainers.image.revision=${BUILD_REF} \
-    org.opencontainers.image.version=${BUILD_VERSION}
-
-#################
-# 6 Healthcheck #
-#################
-
-# Avoid spamming logs
-# hadolint ignore=SC2016
-RUN \
-    # Handle Apache configuration
-    if [ -d /etc/apache2/sites-available ]; then \
-        for file in /etc/apache2/sites-*/*.conf; do \
-            sed -i '/<VirtualHost/a \ \n    # Match requests with the custom User-Agent "HealthCheck" \n    SetEnvIf User-Agent "HealthCheck" dontlog \n    # Exclude matching requests from access logs \n    CustomLog ${APACHE_LOG_DIR}/access.log combined env=!dontlog' "$file"; \
-        done; \
-    fi && \
-    \
-    # Handle Nginx configuration
-    if [ -f /etc/nginx/nginx.conf ]; then \
-        awk '/http \{/{print; print "map $http_user_agent $dontlog {\n  default 0;\n  \"~*HealthCheck\" 1;\n}\naccess_log /var/log/nginx/access.log combined if=$dontlog;"; next}1' /etc/nginx/nginx.conf > /etc/nginx/nginx.conf.new && \
-        mv /etc/nginx/nginx.conf.new /etc/nginx/nginx.conf; \
-    fi
-
-ENV HEALTH_PORT="80" \
-    HEALTH_URL=""
-HEALTHCHECK \
-    --interval=5s \
-    --retries=5 \
-    --start-period=30s \
-    --timeout=25s \
-    CMD curl -A "HealthCheck: Docker/1.0" -s -f "http://127.0.0.1:${HEALTH_PORT}${HEALTH_URL}" &>/dev/null || exit 1

bitwarden/build.yaml

@@ -1,4 +0,0 @@
----
-build_from:
-  aarch64: ghcr.io/hassio-addons/debian-base/aarch64:9.1.0
-  amd64: ghcr.io/hassio-addons/debian-base/amd64:9.1.0

bitwarden/rootfs/etc/nginx/includes/ssl_params.conf

@@ -1,8 +0,0 @@
-ssl_protocols TLSv1.2 TLSv1.3;
-ssl_prefer_server_ciphers off;
-ssl_ciphers ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384;
-ssl_session_timeout  10m;
-ssl_session_cache shared:SSL:10m;
-ssl_session_tickets off;
-ssl_stapling on;
-ssl_stapling_verify on;

bitwarden/rootfs/etc/nginx/includes/upstream.conf

@@ -1,3 +0,0 @@
-upstream backend {
-    server 127.0.0.1:80;
-}

bitwarden/rootfs/etc/s6-overlay/s6-rc.d/init-nginx/type

@@ -1 +0,0 @@
-oneshot

bitwarden/rootfs/etc/s6-overlay/s6-rc.d/init-nginx/up

@@ -1 +0,0 @@
-/etc/s6-overlay/s6-rc.d/init-nginx/run

bitwarden/rootfs/etc/s6-overlay/s6-rc.d/nginx/finish

@@ -1,26 +0,0 @@
-#!/command/with-contenv bashio
-# ==============================================================================
-# Home Assistant Community Add-on: Vaultwarden
-# Take down the S6 supervision tree when Nginx fails
-# ==============================================================================
-declare exit_code
-readonly exit_code_container=$(</run/s6-linux-init-container-results/exitcode)
-readonly exit_code_service="${1}"
-readonly exit_code_signal="${2}"
-readonly service="NGINX"
-
-bashio::log.info \
-  "Service ${service} exited with code ${exit_code_service}" \
-  "(by signal ${exit_code_signal})"
-
-if [[ "${exit_code_service}" -eq 256 ]]; then
-  if [[ "${exit_code_container}" -eq 0 ]]; then
-    echo $((128 + $exit_code_signal)) > /run/s6-linux-init-container-results/exitcode
-  fi
-  [[ "${exit_code_signal}" -eq 15 ]] && exec /run/s6/basedir/bin/halt
-elif [[ "${exit_code_service}" -ne 0 ]]; then
-  if [[ "${exit_code_container}" -eq 0 ]]; then
-    echo "${exit_code_service}" > /run/s6-linux-init-container-results/exitcode
-  fi
-  exec /run/s6/basedir/bin/halt
-fi

bitwarden/rootfs/etc/s6-overlay/s6-rc.d/nginx/type

@@ -1 +0,0 @@
-longrun

bitwarden/rootfs/etc/s6-overlay/s6-rc.d/vaultwarden/finish

@@ -1,27 +0,0 @@
-#!/command/with-contenv bashio
-# shellcheck shell=bash
-# ==============================================================================
-# Home Assistant Community Add-on: Vaultwarden
-# Take down the S6 supervision tree when the server fails
-# ==============================================================================
-declare exit_code
-readonly exit_code_container=$(</run/s6-linux-init-container-results/exitcode)
-readonly exit_code_service="${1}"
-readonly exit_code_signal="${2}"
-readonly service="Vaultwarden"
-
-bashio::log.info \
-  "Service ${service} exited with code ${exit_code_service}" \
-  "(by signal ${exit_code_signal})"
-
-if [[ "${exit_code_service}" -eq 256 ]]; then
-  if [[ "${exit_code_container}" -eq 0 ]]; then
-    echo $((128 + $exit_code_signal)) > /run/s6-linux-init-container-results/exitcode
-  fi
-  [[ "${exit_code_signal}" -eq 15 ]] && exec /run/s6/basedir/bin/halt
-elif [[ "${exit_code_service}" -ne 0 ]]; then
-  if [[ "${exit_code_container}" -eq 0 ]]; then
-    echo "${exit_code_service}" > /run/s6-linux-init-container-results/exitcode
-  fi
-  exec /run/s6/basedir/bin/halt
-fi

bitwarden/rootfs/etc/s6-overlay/s6-rc.d/vaultwarden/type

@@ -1 +0,0 @@
-longrun

filebrowser_quantum/CHANGELOG.md

@@ -1,7 +0,0 @@
-
-## 1.2.0 (28-12-2025)
-- Update to latest version from gtsteffaniak/filebrowser (changelog : https://github.com/gtsteffaniak/filebrowser/releases)
-# Changelog
-
-## 1.1.0
-- Initial FileBrowser Quantum add-on.

filebrowser_quantum/README.md

@@ -1,101 +0,0 @@
-# Home assistant add-on: FileBrowser Quantum
-
-
-I maintain this and other Home Assistant add-ons in my free time: keeping up with upstream changes, HA changes, and testing on real hardware takes a lot of time (and some money). I use around 5-10 of my >110 addons so regularly I install test machines (and purchase some test services such as vpn) that I don't use myself to troubleshoot and improve the addons
-
-If this add-on saves you time or makes your setup easier, I would be very grateful for your support!
-
-[![Buy me a coffee][donation-badge]](https://www.buymeacoffee.com/alexbelgium)
-[![Donate via PayPal][paypal-badge]](https://www.paypal.com/donate/?hosted_button_id=DZFULJZTP3UQA)
-
-## Addon informations
-
-![Version](https://img.shields.io/badge/dynamic/yaml?label=Version&query=%24.version&url=https%3A%2F%2Fraw.githubusercontent.com%2Falexbelgium%2Fhassio-addons%2Fmaster%2Ffilebrowser_quantum%2Fconfig.yaml)
-![Ingress](https://img.shields.io/badge/dynamic/yaml?label=Ingress&query=%24.ingress&url=https%3A%2F%2Fraw.githubusercontent.com%2Falexbelgium%2Fhassio-addons%2Fmaster%2Ffilebrowser_quantum%2Fconfig.yaml)
-![Arch](https://img.shields.io/badge/dynamic/yaml?color=success&label=Arch&query=%24.arch&url=https%3A%2F%2Fraw.githubusercontent.com%2Falexbelgium%2Fhassio-addons%2Fmaster%2Ffilebrowser_quantum%2Fconfig.yaml)
-
-[![Codacy Badge](https://app.codacy.com/project/badge/Grade/9c6cf10bdbba45ecb202d7f579b5be0e)](https://www.codacy.com/gh/alexbelgium/hassio-addons/dashboard?utm_source=github.com&utm_medium=referral&utm_content=alexbelgium/hassio-addons&utm_campaign=Badge_Grade)
-[![GitHub Super-Linter](https://img.shields.io/github/actions/workflow/status/alexbelgium/hassio-addons/weekly-supelinter.yaml?label=Lint%20code%20base)](https://github.com/alexbelgium/hassio-addons/actions/workflows/weekly-supelinter.yaml)
-[![Builder](https://img.shields.io/github/actions/workflow/status/alexbelgium/hassio-addons/onpush_builder.yaml?label=Builder)](https://github.com/alexbelgium/hassio-addons/actions/workflows/onpush_builder.yaml)
-
-[donation-badge]: https://img.shields.io/badge/Buy%20me%20a%20coffee-%23d32f2f?logo=buy-me-a-coffee&style=flat&logoColor=white
-[paypal-badge]: https://img.shields.io/badge/Donate%20via%20PayPal-0070BA?logo=paypal&style=flat&logoColor=white
-
-_Thanks to everyone having starred my repo! To star it click on the image below, then it will be on top right. Thanks!_
-
-[![Stargazers repo roster for @alexbelgium/hassio-addons](https://raw.githubusercontent.com/alexbelgium/hassio-addons/master/.github/stars2.svg)](https://github.com/alexbelgium/hassio-addons/stargazers)
-
-![downloads evolution](https://raw.githubusercontent.com/alexbelgium/hassio-addons/master/filebrowser_quantum/stats.png)
-
-## About
-
-FileBrowser Quantum is a modern, responsive, multi-source file manager with realtime indexing, advanced sharing, and expanded authentication options (password, proxy, OIDC, or no-auth). It is a major fork of the original Filebrowser project, designed for faster browsing and richer previews.
-
-This addon is based on the [docker image](https://hub.docker.com/r/gtstef/filebrowser) from the FileBrowser Quantum project.
-
-## Installation
-
-The installation of this add-on is pretty straightforward and not different in
-comparison to installing any other Home Assistant add-on.
-
-1. [Add my Home Assistant add-ons repository][repository] to your Home Assistant instance.
-1. Install this add-on.
-1. Click the `Save` button to store your configuration.
-1. Start the add-on.
-1. Check the logs of the add-on to see if everything went well.
-1. Access the web UI through the sidebar or at `<your-ip>:8071`.
-
-## Configuration
-
-The web UI can be found at `<your-ip>:8071` or through the Home Assistant sidebar when using Ingress.
-
-**Default credentials:**
-- Username: `admin`
-- Password: `admin`
-
-**Important:** Change the default credentials immediately after first login for security.
-
-### Options
-
-| Option | Type | Default | Description |
-|--------|------|---------|-------------|
-| `auth_method` | list | `password` | Authentication method (`password`, `noauth`, `proxy`, `oidc`) |
-| `localdisks` | str | _(optional)_ | Local drives to mount (e.g., `sda1,sdb1,MYNAS`) |
-| `networkdisks` | str | _(optional)_ | SMB shares to mount (e.g., `//SERVER/SHARE`) |
-| `cifsusername` | str | _(optional)_ | SMB username for network shares |
-| `cifspassword` | str | _(optional)_ | SMB password for network shares |
-| `cifsdomain` | str | _(optional)_ | SMB domain for network shares |
-
-## Setup
-
-1. Start the add-on and wait for it to initialize.
-1. Access the web interface through the Home Assistant sidebar or at `<your-ip>:8071`.
-1. Log in using the default credentials:
-   - Username: `admin`
-   - Password: `admin`
-1. **Important:** Immediately change the default password by clicking on "Settings" > "User Management".
-1. Configure additional sources and authentication settings through the add-on options or the web interface.
-
-### Mounting Drives
-
-This addon supports mounting both local drives and remote SMB shares:
-
-- **Local drives**: See [Mounting Local Drives in Addons](https://github.com/alexbelgium/hassio-addons/wiki/Mounting-Local-Drives-in-Addons)
-- **Remote shares**: See [Mounting Remote Shares in Addons](https://github.com/alexbelgium/hassio-addons/wiki/Mounting-remote-shares-in-Addons)
-
-### Custom Scripts and Environment Variables
-
-This addon supports custom scripts and environment variables through the `addon_config` mapping:
-
-- **Custom scripts**: See [Running Custom Scripts in Addons](https://github.com/alexbelgium/hassio-addons/wiki/Running-custom-scripts-in-Addons)
-- **env_vars option**: Use the add-on `env_vars` option to pass extra environment variables (uppercase or lowercase names). See https://github.com/alexbelgium/hassio-addons/wiki/Add-Environment-variables-to-your-Addon-2 for details.
-
-## Support
-
-Create an issue on GitHub, or ask on the [Home Assistant Community thread](https://community.home-assistant.io/t/home-assistant-addon-filebrowser/282108/3).
-
-[repository]: https://github.com/alexbelgium/hassio-addons
-[aarch64-shield]: https://img.shields.io/badge/aarch64-yes-green.svg
-[amd64-shield]: https://img.shields.io/badge/amd64-yes-green.svg
-[armv7-shield]: https://img.shields.io/badge/armv7-yes-green.svg
-

filebrowser_quantum/apparmor.txt

@@ -1,66 +0,0 @@
-#include <tunables/global>
-
-profile db21ed7f_qbittorrent flags=(attach_disconnected,mediate_deleted) {
-  #include <abstractions/base>
-
-  capability,
-  file,
-  signal,
-  mount,
-  umount,
-  remount,
-  network udp,
-  network tcp,
-  network dgram,
-  network stream,
-  network inet,
-  network inet6,
-  network netlink raw,
-  network unix dgram,
-
-  capability setgid,
-  capability setuid,
-  capability sys_admin,
-  capability dac_read_search,
-  # capability dac_override,
-  # capability sys_rawio,
-
-# S6-Overlay
-  /init ix,
-  /run/{s6,s6-rc*,service}/** ix,
-  /package/** ix,
-  /command/** ix,
-  /run/{,**} rwk,
-  /dev/tty rw,
-  /bin/** ix,
-  /usr/bin/** ix,
-  /usr/lib/bashio/** ix,
-  /etc/s6/** rix,
-  /run/s6/** rix,
-  /etc/services.d/** rwix,
-  /etc/cont-init.d/** rwix,
-  /etc/cont-finish.d/** rwix,
-  /init rix,
-  /var/run/** mrwkl,
-  /var/run/ mrwkl,
-  /dev/i2c-1 mrwkl,
-  # Files required
-  /dev/fuse mrwkl,
-  /dev/sda1 mrwkl,
-  /dev/sdb1 mrwkl,
-  /dev/nvme0 mrwkl,
-  /dev/nvme1 mrwkl,
-  /dev/mmcblk0p1 mrwkl,
-  /dev/* mrwkl,
-  /tmp/** mrkwl,
-
-  # Data access
-  /data/** rw,
-
-  # suppress ptrace denials when using 'docker ps' or using 'ps' inside a container
-  ptrace (trace,read) peer=docker-default,
-
-  # docker daemon confinement requires explict allow rule for signal
-  signal (receive) set=(kill,term) peer=/usr/bin/docker,
-
-}

filebrowser_quantum/build.json

@@ -1,6 +0,0 @@
-{
-    "build_from": {
-        "aarch64": "gtstef/filebrowser:latest",
-        "amd64": "gtstef/filebrowser:latest"
-    }
-}

filebrowser_quantum/config.yaml

@@ -1,113 +0,0 @@
-arch:
-  - aarch64
-  - amd64
-description:
-  FileBrowser Quantum provides a modern, responsive file manager with multi-source
-  support, advanced authentication options, and realtime indexing for your Home
-  Assistant files.
-devices:
-  - /dev/dri
-  - /dev/dri/card0
-  - /dev/dri/card1
-  - /dev/dri/renderD128
-  - /dev/vchiq
-  - /dev/video10
-  - /dev/video11
-  - /dev/video12
-  - /dev/video13
-  - /dev/video14
-  - /dev/video15
-  - /dev/video16
-  - /dev/ttyUSB0
-  - /dev/sda
-  - /dev/sdb
-  - /dev/sdc
-  - /dev/sdd
-  - /dev/sde
-  - /dev/sdf
-  - /dev/sdg
-  - /dev/nvme
-  - /dev/nvme0
-  - /dev/nvme0n1
-  - /dev/nvme0n1p1
-  - /dev/nvme0n1p2
-  - /dev/nvme0n1p3
-  - /dev/nvme1n1
-  - /dev/nvme1n1p1
-  - /dev/nvme1n1p2
-  - /dev/nvme1n1p3
-  - /dev/nvme2n1
-  - /dev/nvme2n1p1
-  - /dev/nvme2n1p2
-  - /dev/nvme2n3p3
-  - /dev/mmcblk
-  - /dev/fuse
-  - /dev/sda1
-  - /dev/sdb1
-  - /dev/sdc1
-  - /dev/sdd1
-  - /dev/sde1
-  - /dev/sdf1
-  - /dev/sdg1
-  - /dev/sda2
-  - /dev/sdb2
-  - /dev/sdc2
-  - /dev/sdd2
-  - /dev/sde2
-  - /dev/sdf2
-  - /dev/sdg2
-  - /dev/sda3
-  - /dev/sdb3
-  - /dev/sda4
-  - /dev/sdb4
-  - /dev/sda5
-  - /dev/sda6
-  - /dev/sda7
-  - /dev/sda8
-  - /dev/nvme0
-  - /dev/nvme1
-  - /dev/nvme2
-  - /dev/md0
-  - /dev/md1
-  - /dev/md2
-  - /dev/md3
-environment:
-  FB_BASEURL: /filebrowser_quantum
-  PGID: "0"
-  PUID: "0"
-image: ghcr.io/alexbelgium/filebrowser_quantum-{arch}
-ingress: true
-ingress_port: 8071
-ingress_stream: true
-map:
-  - addon_config:rw
-  - media:rw
-  - all_addon_configs:rw
-  - homeassistant_config:rw
-  - addons:rw
-  - backup:rw
-  - share:rw
-  - ssl:rw
-name: FileBrowser Quantum
-options:
-  env_vars: []
-  auth_method: noauth
-panel_admin: false
-panel_icon: mdi:file-search
-privileged:
-  - SYS_ADMIN
-  - DAC_READ_SEARCH
-schema:
-  env_vars:
-    - name: match(^[A-Za-z0-9_]+$)
-      value: str?
-  auth_method: list(password|noauth|proxy|oidc)
-  cifsdomain: str?
-  cifspassword: str?
-  cifsusername: str?
-  localdisks: str?
-  networkdisks: str?
-slug: filebrowser_quantum
-udev: true
-url: https://github.com/alexbelgium/hassio-addons
-version: "1.2.0"

filebrowser_quantum/rootfs/etc/cont-init.d/20-folders.sh

@@ -1,42 +0,0 @@
-#!/usr/bin/with-contenv bashio
-# shellcheck shell=bash
-set -e
-
-####################
-# Migrate database #
-####################
-
-if [ -f /homeassistant/addons_config/filebrowser_quantum/filebrowser_quantum.db ]; then
-    echo "Moving database to new location /config"
-    cp -rnf /homeassistant/addons_config/filebrowser_quantum/* /config/
-    rm -r /homeassistant/addons_config/filebrowser_quantum
-fi
-
-######################
-# Link addon folders #
-######################
-
-# Clean symlinks
-find /config -maxdepth 1 -type l -delete
-if [ -d /homeassistant/addons_config ]; then
-    find /homeassistant/addons_config -maxdepth 1 -type l -delete
-fi
-
-# Remove erroneous folders
-if [ -d /homeassistant ]; then
-    if [ -d /config/addons_config ]; then
-        rm -r /config/addons_config
-    fi
-    if [ -d /config/addons_autoscripts ]; then
-        rm -r /config/addons_autoscripts
-    fi
-fi
-
-# Create symlinks with legacy folders
-if [ -d /homeassistant/addons_config ]; then
-    ln -s /homeassistant/addons_config /config
-    find /addon_configs/ -maxdepth 1 -mindepth 1 -type d -not -name "*filebrowser_quantum*" -exec ln -s {} /config/addons_config/ \;
-fi
-if [ -d /homeassistant/addons_autoscripts ]; then
-    ln -s /homeassistant/addons_autoscripts /config
-fi

filebrowser_quantum/rootfs/etc/cont-init.d/99-run.sh

@@ -1,241 +0,0 @@
-#!/usr/bin/env bashio
-# shellcheck shell=bash
-set -e
-
-############
-# TIMEZONE #
-############
-
-if bashio::config.has_value 'TZ'; then
-    TIMEZONE=$(bashio::config 'TZ')
-    bashio::log.info "Setting timezone to $TIMEZONE"
-    if [ -f /usr/share/zoneinfo/"$TIMEZONE" ]; then
-        ln -snf /usr/share/zoneinfo/"$TIMEZONE" /etc/localtime
-        echo "$TIMEZONE" > /etc/timezone
-    else
-        bashio::log.fatal "$TIMEZONE not found, are you sure it is a valid timezone?"
-    fi
-fi
-
-###################
-# SSL CONFIG v1.0 #
-###################
-
-bashio::config.require.ssl
-if bashio::config.true 'ssl'; then
-    bashio::log.info "ssl enabled. If webui don't work, disable ssl or check your certificate paths"
-    #set variables
-    CERTFILE="/ssl/$(bashio::config 'certfile')"
-    KEYFILE="/ssl/$(bashio::config 'keyfile')"
-else
-    CERTFILE=""
-    KEYFILE=""
-fi
-export CERTFILE KEYFILE
-
-#################
-# NGINX SETTING #
-#################
-
-#declare port
-#declare certfile
-declare ingress_interface
-declare ingress_port
-#declare keyfile
-
-FB_BASEURL=$(bashio::addon.ingress_entry)
-export FB_BASEURL
-
-declare ADDON_PROTOCOL=http
-# Generate Ingress configuration
-if bashio::config.true 'ssl'; then
-    ADDON_PROTOCOL=https
-fi
-
-#port=$(bashio::addon.port 80)
-ingress_port=$(bashio::addon.ingress_port)
-ingress_interface=$(bashio::addon.ip_address)
-sed -i "s|%%protocol%%|${ADDON_PROTOCOL}|g" /etc/nginx/servers/ingress.conf
-sed -i "s|%%port%%|${ingress_port}|g" /etc/nginx/servers/ingress.conf
-sed -i "s|%%interface%%|${ingress_interface}|g" /etc/nginx/servers/ingress.conf
-sed -i "s|%%subpath%%|${FB_BASEURL}/|g" /etc/nginx/servers/ingress.conf
-mkdir -p /var/log/nginx && touch /var/log/nginx/error.log
-
-############################
-# FILEBROWSER CONFIGURATION #
-############################
-
-CONFIG_PATH="/config/filebrowser_quantum.yaml"
-mkdir -p /config /cache
-
-export FILEBROWSER_CONFIG="${CONFIG_PATH}"
-
-python3 - <<'PY'
-import json
-import os
-
-options_path = "/data/options.json"
-config_path = os.environ["FILEBROWSER_CONFIG"]
-
-with open(options_path, "r", encoding="utf-8") as f:
-    options = json.load(f)
-
-base_url = options.get("base_url") or os.environ.get("FB_BASEURL") or "/"
-
-def bool_or_none(value):
-    return value if isinstance(value, bool) else None
-
-sources = []
-for source in options.get("sources") or [{"path": "/", "name": "Root", "default_enabled": True}]:
-    entry = {"path": source.get("path", "/")}
-    if source.get("name"):
-        entry["name"] = source["name"]
-
-    source_config = {}
-    config_mappings = {
-        "default_enabled": "defaultEnabled",
-        "default_user_scope": "defaultUserScope",
-        "create_user_dir": "createUserDir",
-        "disable_indexing": "disableIndexing",
-        "deny_by_default": "denyByDefault",
-        "private": "private",
-        "indexing_interval_minutes": "indexingIntervalMinutes",
-    }
-    for option_key, config_key in config_mappings.items():
-        if option_key in source and source[option_key] not in (None, ""):
-            value = source[option_key]
-            if option_key == "indexing_interval_minutes" and not value:
-                continue
-            source_config[config_key] = value
-
-    conditionals = {}
-    if "ignore_hidden" in source:
-        value = bool_or_none(source.get("ignore_hidden"))
-        if value is not None:
-            conditionals["ignoreHidden"] = value
-    if "ignore_zero_size_folders" in source:
-        value = bool_or_none(source.get("ignore_zero_size_folders"))
-        if value is not None:
-            conditionals["ignoreZeroSizeFolders"] = value
-    if conditionals:
-        source_config["conditionals"] = conditionals
-
-    if source_config:
-        entry["config"] = source_config
-    sources.append(entry)
-
-server = {
-    "port": 8080,
-    "listen": "0.0.0.0",
-    "baseURL": base_url,
-    "logging": [
-        {
-            "levels": options.get("log_levels", "info|warning|error"),
-        }
-    ],
-    "database": "/config/filebrowser_quantum.db",
-    "cacheDir": "/cache",
-    "cacheDirCleanup": options.get("cache_dir_cleanup", True),
-    "disablePreviews": options.get("disable_previews", False),
-    "disablePreviewResize": options.get("disable_preview_resize", False),
-    "disableTypeDetectionByHeader": options.get("disable_type_detection_by_header", False),
-    "disableUpdateCheck": options.get("disable_update_check", False),
-    "sources": sources,
-}
-
-if options.get("external_url"):
-    server["externalUrl"] = options["external_url"]
-if options.get("internal_url"):
-    server["internalUrl"] = options["internal_url"]
-if options.get("max_archive_size_gb"):
-    server["maxArchiveSize"] = options["max_archive_size_gb"]
-
-certfile = os.environ.get("CERTFILE")
-keyfile = os.environ.get("KEYFILE")
-if certfile and keyfile:
-    server["tlsCert"] = certfile
-    server["tlsKey"] = keyfile
-
-auth_method = options.get("auth_method", "password")
-
-password_config = {
-    "enabled": auth_method == "password",
-    "minLength": options.get("password_min_length", 5),
-    "signup": options.get("password_signup", False),
-    "enforcedOtp": options.get("password_enforced_otp", False),
-}
-
-proxy_config = {
-    "enabled": auth_method == "proxy",
-}
-if options.get("proxy_auth_header"):
-    proxy_config["header"] = options["proxy_auth_header"]
-proxy_config["createUser"] = options.get("proxy_auth_create_user", False)
-if options.get("proxy_auth_logout_redirect_url"):
-    proxy_config["logoutRedirectUrl"] = options["proxy_auth_logout_redirect_url"]
-
-oidc_config = {
-    "enabled": auth_method == "oidc",
-}
-if options.get("oidc_client_id"):
-    oidc_config["clientId"] = options["oidc_client_id"]
-if options.get("oidc_client_secret"):
-    oidc_config["clientSecret"] = options["oidc_client_secret"]
-if options.get("oidc_issuer_url"):
-    oidc_config["issuerUrl"] = options["oidc_issuer_url"]
-if options.get("oidc_scopes"):
-    oidc_config["scopes"] = options["oidc_scopes"]
-if options.get("oidc_user_identifier"):
-    oidc_config["userIdentifier"] = options["oidc_user_identifier"]
-if options.get("oidc_admin_group"):
-    oidc_config["adminGroup"] = options["oidc_admin_group"]
-if options.get("oidc_groups_claim"):
-    oidc_config["groupsClaim"] = options["oidc_groups_claim"]
-if options.get("oidc_logout_redirect_url"):
-    oidc_config["logoutRedirectUrl"] = options["oidc_logout_redirect_url"]
-oidc_config["createUser"] = options.get("oidc_create_user", False)
-oidc_config["disableVerifyTLS"] = options.get("oidc_disable_verify_tls", False)
-
-auth = {
-    "tokenExpirationHours": options.get("token_expiration_hours", 2),
-    "adminUsername": options.get("admin_username", "admin"),
-    "adminPassword": options.get("admin_password", "admin"),
-    "methods": {
-        "noauth": auth_method == "noauth",
-        "password": password_config,
-        "proxy": proxy_config,
-        "oidc": oidc_config,
-    },
-}
-
-frontend = {
-    "name": "FileBrowser Quantum",
-}
-
-config = {
-    "server": server,
-    "auth": auth,
-    "frontend": frontend,
-}
-
-with open(config_path, "w", encoding="utf-8") as f:
-    json.dump(config, f, indent=2)
-    f.write("\n")
-PY
-
-######################
-# LAUNCH FILEBROWSER #
-######################
-
-# Prevent conflicts
-for folders in /etc/services.d /etc/s6-overlay; do
-    [[ -d "$folders" ]] && rm -r "$folders"
-done
-
-bashio::log.info "Starting..."
-
-cd /home/filebrowser
-./filebrowser &
-bashio::net.wait_for 8080 localhost 900 || true
-bashio::log.info "Started !"
-nginx || bashio::log.fatal "Nginx failed"

filebrowser_quantum/rootfs/etc/nginx/includes/mime.types

@@ -1,96 +0,0 @@
-types {
-    text/html                                        html htm shtml;
-    text/css                                         css;
-    text/xml                                         xml;
-    image/gif                                        gif;
-    image/jpeg                                       jpeg jpg;
-    application/javascript                           js;
-    application/atom+xml                             atom;
-    application/rss+xml                              rss;
-
-    text/mathml                                      mml;
-    text/plain                                       txt;
-    text/vnd.sun.j2me.app-descriptor                 jad;
-    text/vnd.wap.wml                                 wml;
-    text/x-component                                 htc;
-
-    image/png                                        png;
-    image/svg+xml                                    svg svgz;
-    image/tiff                                       tif tiff;
-    image/vnd.wap.wbmp                               wbmp;
-    image/webp                                       webp;
-    image/x-icon                                     ico;
-    image/x-jng                                      jng;
-    image/x-ms-bmp                                   bmp;
-
-    font/woff                                        woff;
-    font/woff2                                       woff2;
-
-    application/java-archive                         jar war ear;
-    application/json                                 json;
-    application/mac-binhex40                         hqx;
-    application/msword                               doc;
-    application/pdf                                  pdf;
-    application/postscript                           ps eps ai;
-    application/rtf                                  rtf;
-    application/vnd.apple.mpegurl                    m3u8;
-    application/vnd.google-earth.kml+xml             kml;
-    application/vnd.google-earth.kmz                 kmz;
-    application/vnd.ms-excel                         xls;
-    application/vnd.ms-fontobject                    eot;
-    application/vnd.ms-powerpoint                    ppt;
-    application/vnd.oasis.opendocument.graphics      odg;
-    application/vnd.oasis.opendocument.presentation  odp;
-    application/vnd.oasis.opendocument.spreadsheet   ods;
-    application/vnd.oasis.opendocument.text          odt;
-    application/vnd.openxmlformats-officedocument.presentationml.presentation
-                                                     pptx;
-    application/vnd.openxmlformats-officedocument.spreadsheetml.sheet
-                                                     xlsx;
-    application/vnd.openxmlformats-officedocument.wordprocessingml.document
-                                                     docx;
-    application/vnd.wap.wmlc                         wmlc;
-    application/x-7z-compressed                      7z;
-    application/x-cocoa                              cco;
-    application/x-java-archive-diff                  jardiff;
-    application/x-java-jnlp-file                     jnlp;
-    application/x-makeself                           run;
-    application/x-perl                               pl pm;
-    application/x-pilot                              prc pdb;
-    application/x-rar-compressed                     rar;
-    application/x-redhat-package-manager             rpm;
-    application/x-sea                                sea;
-    application/x-shockwave-flash                    swf;
-    application/x-stuffit                            sit;
-    application/x-tcl                                tcl tk;
-    application/x-x509-ca-cert                       der pem crt;
-    application/x-xpinstall                          xpi;
-    application/xhtml+xml                            xhtml;
-    application/xspf+xml                             xspf;
-    application/zip                                  zip;
-
-    application/octet-stream                         bin exe dll;
-    application/octet-stream                         deb;
-    application/octet-stream                         dmg;
-    application/octet-stream                         iso img;
-    application/octet-stream                         msi msp msm;
-
-    audio/midi                                       mid midi kar;
-    audio/mpeg                                       mp3;
-    audio/ogg                                        ogg;
-    audio/x-m4a                                      m4a;
-    audio/x-realaudio                                ra;
-
-    video/3gpp                                       3gpp 3gp;
-    video/mp2t                                       ts;
-    video/mp4                                        mp4;
-    video/mpeg                                       mpeg mpg;
-    video/quicktime                                  mov;
-    video/webm                                       webm;
-    video/x-flv                                      flv;
-    video/x-m4v                                      m4v;
-    video/x-mng                                      mng;
-    video/x-ms-asf                                   asx asf;
-    video/x-ms-wmv                                   wmv;
-    video/x-msvideo                                  avi;
-}

filebrowser_quantum/rootfs/etc/nginx/includes/proxy_params.conf

@@ -1,16 +0,0 @@
-proxy_http_version          1.1;
-proxy_ignore_client_abort   off;
-proxy_read_timeout          86400s;
-proxy_redirect              off;
-proxy_send_timeout          86400s;
-proxy_max_temp_file_size    0;
-
-proxy_hide_header X-Frame-Options;
-proxy_set_header Accept-Encoding "";
-proxy_set_header Connection $connection_upgrade;
-proxy_set_header Upgrade $http_upgrade;
-proxy_set_header Host $http_host;
-proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
-proxy_set_header X-Forwarded-Proto $scheme;
-proxy_set_header X-NginX-Proxy true;
-proxy_set_header X-Real-IP $remote_addr; 

filebrowser_quantum/rootfs/etc/nginx/includes/resolver.conf

@@ -1 +0,0 @@
-resolver 127.0.0.11 ipv6=off;

filebrowser_quantum/rootfs/etc/nginx/includes/server_params.conf

@@ -1,6 +0,0 @@
-root            /dev/null;
-server_name     $hostname;
-
-add_header X-Content-Type-Options nosniff;
-add_header X-XSS-Protection "1; mode=block";
-add_header X-Robots-Tag none;

filebrowser_quantum/rootfs/etc/nginx/includes/upstream.conf

@@ -1,3 +0,0 @@
-upstream backend {
-    server 127.0.0.1:8080;
-} 

filebrowser_quantum/rootfs/etc/nginx/nginx.conf

@@ -1,59 +0,0 @@
-
-# Run nginx in foreground.
-daemon off;
-
-# This is run inside Docker.
-user root;
-
-# Pid storage location.
-pid /var/run/nginx.pid;
-
-# Set number of worker processes.
-worker_processes 1;
-
-# Enables the use of JIT for regular expressions to speed-up their processing.
-# Disabled for compatibility with CPUs that do not support PCRE JIT, which caused
-# crashes on some systems (see issue #1993).
-pcre_jit off;
-
-# Write error log to Hass.io add-on log.
-error_log /proc/1/fd/1 error;
-
-# Load allowed environment vars
-env HASSIO_TOKEN;
-
-# Load dynamic modules.
-include /etc/nginx/modules/*.conf;
-
-# Max num of simultaneous connections by a worker process.
-events {
-    worker_connections 512;
-}
-
-http {
-    include /etc/nginx/includes/mime.types;
-
-    log_format hassio '[$time_local] $status '
-                        '$http_x_forwarded_for($remote_addr) '
-                        '$request ($http_user_agent)';
-
-    access_log              /proc/1/fd/1 hassio;
-    client_max_body_size    4G;
-    default_type            application/octet-stream;
-    gzip                    on;
-    keepalive_timeout       65;
-    sendfile                on;
-    server_tokens           off;
-    tcp_nodelay             on;
-    tcp_nopush              on;
-
-    map $http_upgrade $connection_upgrade {
-        default upgrade;
-        ''      close;
-    }
-
-    include /etc/nginx/includes/resolver.conf;
-    include /etc/nginx/includes/upstream.conf;
-
-    include /etc/nginx/servers/*.conf;
-} 

filebrowser_quantum/rootfs/etc/nginx/servers/ingress.conf

@@ -1,17 +0,0 @@
-server {
-    listen %%interface%%:%%port%% default_server;
-
-    include /etc/nginx/includes/server_params.conf;
-    include /etc/nginx/includes/proxy_params.conf;
-    
-    client_max_body_size 0;
-
-   location / {
-       add_header Access-Control-Allow-Origin *;
-       proxy_connect_timeout 30m;
-       proxy_send_timeout 30m;
-       proxy_read_timeout 30m;
-       proxy_pass         %%protocol%%://backend%%subpath%%;
-  }
-
-}

filebrowser_quantum/updater.json

@@ -1,10 +0,0 @@
-{
-  "github_beta": "true",
-  "last_update": "28-12-2025",
-  "paused": false,
-  "repository": "alexbelgium/hassio-addons",
-  "slug": "filebrowser_quantum",
-  "source": "github",
-  "upstream_repo": "gtsteffaniak/filebrowser",
-  "upstream_version": "1.2.0"
-}

immich_cuda/CHANGELOG.md

@@ -1,6 +1,3 @@
-
-## 2.4.1 (28-12-2025)
-- Update to latest version from imagegenius/docker-immich (changelog : https://github.com/imagegenius/docker-immich/releases)
 ## 2.4.1 (27-12-2025)
 - Minor bugs fixed
 

immich_cuda/config.yaml

@@ -139,6 +139,6 @@ slug: immich_cuda
 udev: true
 url: https://github.com/alexbelgium/hassio-addons
 usb: true
-version: "2.4.1"
+version: 2.4.1
 video: true
 webui: http://[HOST]:[PORT:8080]

immich_cuda/updater.json

@@ -1,9 +1,9 @@
 {
   "github_beta": "false",
-  "last_update": "28-12-2025",
+  "last_update": "22-11-2025",
   "repository": "alexbelgium/hassio-addons",
   "slug": "immich",
   "source": "github",
   "upstream_repo": "imagegenius/docker-immich",
-  "upstream_version": "2.4.1"
+  "upstream_version": "2.3.1"
 }

jackett/CHANGELOG.md

@@ -1,7 +1,4 @@
 
-## 0.24.590 (28-12-2025)
-- Update to latest version from linuxserver/docker-jackett (changelog : https://github.com/linuxserver/docker-jackett/releases)
-
 ## 0.24.569 (27-12-2025)
 - Update to latest version from linuxserver/docker-jackett (changelog : https://github.com/linuxserver/docker-jackett/releases)
 

jackett/config.yaml

@@ -106,5 +106,5 @@ schema:
 slug: jackett_nas
 udev: true
 url: https://github.com/alexbelgium/hassio-addons/tree/master/jackett
-version: "0.24.590"
+version: "0.24.569"
 webui: http://[HOST]:[PORT:9117]

jackett/updater.json

@@ -1,8 +1,8 @@
 {
-  "last_update": "28-12-2025",
+  "last_update": "27-12-2025",
   "repository": "alexbelgium/hassio-addons",
   "slug": "jackett",
   "source": "github",
   "upstream_repo": "linuxserver/docker-jackett",
-  "upstream_version": "0.24.590"
+  "upstream_version": "0.24.569"
 }

joplin/CHANGELOG.md

@@ -1,5 +1,3 @@
-## 3.5.2-2 (28-12-2025)
-- Minor bugs fixed
 
 ## 3.5.2 (20-12-2025)
 - Update to latest version from etechonomy/joplin-server (changelog : https://github.com/etechonomy/joplin-server/releases)

joplin/config.yaml

@@ -104,5 +104,5 @@ schema:
 slug: joplin
 udev: true
 url: https://github.com/alexbelgium/hassio-addons
-version: 3.5.2-2
+version: "3.5.2"
 webui: "[PROTO:ssl]://[HOST]:[PORT:22300]"

joplin/rootfs/etc/cont-init.d/99-run.sh

@@ -1,6 +1,7 @@
-#!/command/with-contenv bashio
+#!/usr/bin/env bashio
 # shellcheck shell=bash
-set -euo pipefail
+# shellcheck disable=SC2155
+set -e
 
 bashio::log.warning "Warning - minimum configuration recommended : 2 cpu cores and 4 GB of memory. Otherwise the system will become unresponsive and crash."
 
@@ -9,135 +10,108 @@ unlock_sqlite_migrations() {
 
     if ! command -v sqlite3 >/dev/null 2>&1; then
         bashio::log.warning "sqlite3 not available; skipping SQLite migration lock check."
-        return 0
+        return
     fi
 
-    # Only proceed if the DB file exists
-    if [[ ! -f "$db_path" ]]; then
-        bashio::log.warning "SQLite DB not found at $db_path; skipping migration unlock."
-        return 0
+    if ! sqlite3 "$db_path" "SELECT name FROM sqlite_master WHERE type='table' AND name='knex_migrations_lock';" | grep -q "knex_migrations_lock"; then
+        return
     fi
 
-    # If the lock table doesn't exist yet, nothing to unlock
-    local has_table
-    has_table="$(sqlite3 "$db_path" "SELECT 1 FROM sqlite_master WHERE type='table' AND name='knex_migrations_lock' LIMIT 1;" 2>/dev/null || true)"
-    [[ "$has_table" == "1" ]] || return 0
-
-    # Ensure the lock row exists (Knex expects one row)
-    # Typical schema: (index INTEGER PRIMARY KEY, is_locked INTEGER)
-    sqlite3 "$db_path" "
-        PRAGMA busy_timeout=5000;
-        INSERT OR IGNORE INTO knex_migrations_lock(\"index\", is_locked) VALUES (1, 0);
-    " >/dev/null 2>&1 || true
-
     local is_locked
-    is_locked="$(sqlite3 "$db_path" "PRAGMA busy_timeout=5000; SELECT is_locked FROM knex_migrations_lock WHERE \"index\"=1 LIMIT 1;" 2>/dev/null || true)"
+    is_locked=$(sqlite3 "$db_path" "SELECT is_locked FROM knex_migrations_lock LIMIT 1;" 2>/dev/null || true)
 
     if [[ "$is_locked" == "1" ]]; then
         bashio::log.warning "Locked SQLite migration table detected, attempting to unlock."
-        sqlite3 "$db_path" "
-            PRAGMA busy_timeout=5000;
-            UPDATE knex_migrations_lock SET is_locked = 0 WHERE \"index\"=1 AND is_locked=1;
-        " >/dev/null 2>&1 || bashio::log.warning "Failed to clear SQLite migration lock."
+        sqlite3 "$db_path" "UPDATE knex_migrations_lock SET is_locked = 0;" || bashio::log.warning "Failed to clear SQLite migration lock."
     fi
 }
 
 unlock_postgres_migrations() {
     if ! command -v psql >/dev/null 2>&1; then
         bashio::log.warning "psql not available; skipping PostgreSQL migration lock check."
-        return 0
+        return
     fi
 
     if [[ -z "${POSTGRES_DATABASE:-}" || -z "${POSTGRES_USER:-}" || -z "${POSTGRES_HOST:-}" ]]; then
         bashio::log.warning "PostgreSQL configuration incomplete; skipping migration lock check."
-        return 0
+        return
     fi
 
     local pg_port="${POSTGRES_PORT:-5432}"
     export PGPASSWORD="${POSTGRES_PASSWORD:-}"
 
-    # If table doesn't exist, skip
-    local has_table
-    has_table="$(psql -h "$POSTGRES_HOST" -p "$pg_port" -U "$POSTGRES_USER" -d "$POSTGRES_DATABASE" -Atqc \
-        "SELECT 1 FROM information_schema.tables WHERE table_name='knex_migrations_lock' LIMIT 1;" 2>/dev/null || true)"
-    [[ "$has_table" == "1" ]] || { unset PGPASSWORD; return 0; }
-
-    # Ensure row exists
-    psql -h "$POSTGRES_HOST" -p "$pg_port" -U "$POSTGRES_USER" -d "$POSTGRES_DATABASE" -Atqc \
-        "INSERT INTO knex_migrations_lock(\"index\", is_locked) VALUES (1, 0) ON CONFLICT (\"index\") DO NOTHING;" \
-        >/dev/null 2>&1 || true
-
     local is_locked
-    is_locked="$(psql -h "$POSTGRES_HOST" -p "$pg_port" -U "$POSTGRES_USER" -d "$POSTGRES_DATABASE" -Atqc \
-        "SELECT is_locked FROM knex_migrations_lock WHERE \"index\"=1 LIMIT 1;" 2>/dev/null || true)"
+    is_locked=$(psql -h "$POSTGRES_HOST" -p "$pg_port" -U "$POSTGRES_USER" -d "$POSTGRES_DATABASE" -Atqc "SELECT is_locked FROM knex_migrations_lock LIMIT 1;" 2>/dev/null || true)
 
     if [[ "$is_locked" == "1" ]]; then
         bashio::log.warning "Locked PostgreSQL migration table detected, attempting to unlock."
-        psql -h "$POSTGRES_HOST" -p "$pg_port" -U "$POSTGRES_USER" -d "$POSTGRES_DATABASE" -Atqc \
-            "UPDATE knex_migrations_lock SET is_locked = 0 WHERE \"index\"=1 AND is_locked=1;" \
-            >/dev/null 2>&1 || bashio::log.warning "Failed to clear PostgreSQL migration lock."
+        psql -h "$POSTGRES_HOST" -p "$pg_port" -U "$POSTGRES_USER" -d "$POSTGRES_DATABASE" -Atqc "UPDATE knex_migrations_lock SET is_locked = 0;" || bashio::log.warning "Failed to clear PostgreSQL migration lock."
     fi
 
     unset PGPASSWORD
 }
 
-# -------------------
-# Data location
-# -------------------
-LOCATION="$(bashio::config 'data_location')"
-if [[ "$LOCATION" == "null" || -z "$LOCATION" ]]; then
+# Check data location
+LOCATION=$(bashio::config 'data_location')
+if [[ "$LOCATION" = "null" || -z "$LOCATION" ]]; then
+    # Default location
     LOCATION="/config/addons_config/joplin"
 else
     bashio::log.warning "Warning : a custom data location was selected, but the previous folder will NOT be copied. You need to do it manually"
 fi
 
-install -d -m 0755 -o joplin -g joplin "$LOCATION" "$LOCATION/resources"
-
-# Ensure DB exists (touch does not truncate)
-if [[ ! -f "$LOCATION/database.sqlite" ]]; then
-    install -m 0644 -o joplin -g joplin /dev/null "$LOCATION/database.sqlite"
+# Create folder
+if [ ! -d "$LOCATION" ]; then
+    echo "Creating $LOCATION"
+    mkdir -p "$LOCATION"
 fi
 
-# Link resources into server dir
-ln -sfn "$LOCATION/resources" /home/joplin/packages/server/resources
+touch "$LOCATION"/database.sqlite
 
+if [ ! -d "$LOCATION"/resources ]; then
+    mkdir -p "$LOCATION"/resources
+fi
+ln -s "$LOCATION"/resources /home/joplin/packages/server
+
+chown -R joplin:joplin "$LOCATION"
+chmod -R 777 "$LOCATION"
+chmod 755 "$LOCATION/database.sqlite"
 export SQLITE_DATABASE="$LOCATION/database.sqlite"
 
-# -------------------
-# DB selection + unlock
-# -------------------
 if bashio::config.has_value 'POSTGRES_DATABASE'; then
     bashio::log.info "Using postgres"
 
-    bashio::config.has_value 'DB_CLIENT' && export DB_CLIENT="$(bashio::config 'DB_CLIENT')"
-    bashio::config.has_value 'POSTGRES_PASSWORD' && export POSTGRES_PASSWORD="$(bashio::config 'POSTGRES_PASSWORD')"
-    bashio::config.has_value 'POSTGRES_DATABASE' && export POSTGRES_DATABASE="$(bashio::config 'POSTGRES_DATABASE')"
-    bashio::config.has_value 'POSTGRES_USER' && export POSTGRES_USER="$(bashio::config 'POSTGRES_USER')"
-    bashio::config.has_value 'POSTGRES_PORT' && export POSTGRES_PORT="$(bashio::config 'POSTGRES_PORT')"
-    bashio::config.has_value 'POSTGRES_HOST' && export POSTGRES_HOST="$(bashio::config 'POSTGRES_HOST')"
-
+    bashio::config.has_value 'DB_CLIENT' && export DB_CLIENT=$(bashio::config 'DB_CLIENT') && bashio::log.info 'Database client set'
+    bashio::config.has_value 'POSTGRES_PASSWORD' && export POSTGRES_PASSWORD=$(bashio::config 'POSTGRES_PASSWORD') && bashio::log.info 'Postgrep Password set'
+    bashio::config.has_value 'POSTGRES_DATABASE' && export POSTGRES_DATABASE=$(bashio::config 'POSTGRES_DATABASE') && bashio::log.info 'Postgrep Database set'
+    bashio::config.has_value 'POSTGRES_USER' && export POSTGRES_USER=$(bashio::config 'POSTGRES_USER') && bashio::log.info 'Postgrep User set'
+    bashio::config.has_value 'POSTGRES_PORT' && export POSTGRES_PORT=$(bashio::config 'POSTGRES_PORT') && bashio::log.info 'Postgrep Port set'
+    bashio::config.has_value 'POSTGRES_HOST' && export POSTGRES_HOST=$(bashio::config 'POSTGRES_HOST') && bashio::log.info 'Postgrep Host set'
     unlock_postgres_migrations
 else
+
     bashio::log.info "Using sqlite"
     unlock_sqlite_migrations "$SQLITE_DATABASE"
+
 fi
 
-# -------------------
-# App env
-# -------------------
-bashio::config.has_value 'MAILER_HOST' && export MAILER_HOST="$(bashio::config 'MAILER_HOST')"
-bashio::config.has_value 'MAILER_PORT' && export MAILER_PORT="$(bashio::config 'MAILER_PORT')"
-bashio::config.has_value 'MAILER_SECURITY' && export MAILER_SECURITY="$(bashio::config 'MAILER_SECURITY')"
-bashio::config.has_value 'MAILER_AUTH_USER' && export MAILER_AUTH_USER="$(bashio::config 'MAILER_AUTH_USER')"
-bashio::config.has_value 'MAILER_AUTH_PASSWORD' && export MAILER_AUTH_PASSWORD="$(bashio::config 'MAILER_AUTH_PASSWORD')"
-bashio::config.has_value 'MAILER_NOREPLY_NAME' && export MAILER_NOREPLY_NAME="$(bashio::config 'MAILER_NOREPLY_NAME')"
-bashio::config.has_value 'MAILER_NOREPLY_EMAIL' && export MAILER_NOREPLY_EMAIL="$(bashio::config 'MAILER_NOREPLY_EMAIL')"
-bashio::config.has_value 'MAILER_ENABLED' && export MAILER_ENABLED="$(bashio::config 'MAILER_ENABLED')"
+##############
+# LAUNCH APP #
+##############
 
-export APP_BASE_URL="$(bashio::config 'APP_BASE_URL')"
+# Configure app
+bashio::config.has_value 'MAILER_HOST' && export MAILER_HOST=$(bashio::config 'MAILER_HOST') && bashio::log.info 'Mailer Host set'
+bashio::config.has_value 'MAILER_PORT' && export MAILER_PORT=$(bashio::config 'MAILER_PORT') && bashio::log.info 'Mailer Port set'
+bashio::config.has_value 'MAILER_SECURITY' && export MAILER_SECURITY=$(bashio::config 'MAILER_SECURITY') && bashio::log.info 'Mailer Security set'
+bashio::config.has_value 'MAILER_AUTH_USER' && export MAILER_AUTH_USER=$(bashio::config 'MAILER_AUTH_USER') && bashio::log.info 'Mailer User set'
+bashio::config.has_value 'MAILER_AUTH_PASSWORD' && export MAILER_AUTH_PASSWORD=$(bashio::config 'MAILER_AUTH_PASSWORD') && bashio::log.info 'Mailer Password set'
+bashio::config.has_value 'MAILER_NOREPLY_NAME' && export MAILER_NOREPLY_NAME=$(bashio::config 'MAILER_NOREPLY_NAME') && bashio::log.info 'Mailer Noreply Name set'
+bashio::config.has_value 'MAILER_NOREPLY_EMAIL' && export MAILER_NOREPLY_EMAIL=$(bashio::config 'MAILER_NOREPLY_EMAIL') && bashio::log.info 'Mailer Noreply Email set'
+bashio::config.has_value 'MAILER_ENABLED' && export MAILER_ENABLED=$(bashio::config 'MAILER_ENABLED') && bashio::log.info 'Mailer Enabled set'
+export APP_BASE_URL=$(bashio::config 'APP_BASE_URL')
 export ALLOWED_HOSTS="*"
 
 bashio::log.info 'Starting Joplin. Initial user is "admin@localhost" with password "admin"'
 
-cd /home/joplin || exit 1
-exec npm --prefix packages/server start
+cd /home/joplin || true
+npm --prefix packages/server start