Migrate bashio::addon.* to bashio::app.* (deprecated API)

bashio now emits deprecation warnings for bashio::addon.* calls.
This migrates all 227 call-sites across 86 files to use the new
bashio::app.* API.

Cross-compatibility is preserved in two ways:
1. bashio-standalone.sh: adds bashio::app.* functions that forward to
   bashio::addon.* (used when running without HA Supervisor).
   Also adds the missing ingress_url, restart and stop stubs.
2. ha_entrypoint.sh: injects a one-liner compat shim after the shebang
   of every cont-init and service script at container startup. On old
   bashio installations (bashio::app.* absent) the shim defines
   bashio::app.* as thin wrappers around bashio::addon.*; on new bashio
   the guard condition is true so the block is a no-op.

The probe script in ha_entrypoint.sh is also updated to try
bashio::app.version before falling back to bashio::addon.version.

https://claude.ai/code/session_011FWFBhYQ6VS5FauSqv4UMo

.github/stargazer_countries.csv

@@ -22,6 +22,7 @@ username,country
 9turnbull,
 A-n-k-a,
 ABAJNOK,
+ADVENTURER08,
 AFreiling,
 AFumi39,
 ATLAS-IND-Software,
@@ -182,6 +183,7 @@ DeltaAngle,
 DenisKevljanin,
 DennisKae,Germany
 Depechie,Belgium
+DerDaehne,
 DerFelixPlayer2,Austria
 DerRemo,
 Devinyl,
@@ -266,6 +268,7 @@ Germaenace,
 Getrio,Italy
 Ghost-Sam1222,
 GiacoAV,
+GianlucaCise,
 Giga77,
 GleDel,
 GlebYavorski,
@@ -616,6 +619,7 @@ RubenKelevra,Germany
 Rudi-Schmudi,
 RudiKlein,Netherlands
 RudyDevroey,
+RusikOk,Ukraine
 Ryan68,
 RymenTe,
 SALIMKHALID1,
@@ -750,6 +754,7 @@ VfBfoerst,
 ViPeR5000,Portugal
 Vikinge,
 ViorelMocanu,Romania
+Viszokit,
 VladDBA,Romania
 Vladislaf70,
 VortexP,Finland
@@ -820,6 +825,7 @@ ajtatum,United States
 ajxcorrea,
 ak-flash,
 akalagov,Kazakhstan
+akerfonta,
 akmzero,
 akrigator,
 alberttimmers,
@@ -1139,6 +1145,7 @@ dan81andrei,
 danbruno,
 danctrl,Germany
 danez,United States
+danieldotnl,Netherlands
 dannybeeckman,
 dannybloomfield,
 danveitch76,
@@ -1312,7 +1319,7 @@ fcastilloec,
 fctgcoder,
 felipecrs,Brazil
 fenteac,
-fenyag7,
+fenyag7,Germany
 fermuch,
 fernbrun,
 fess1100,
@@ -1425,7 +1432,7 @@ h3llrais3r,Belgium
 h47e,
 hAxxelS,
 ha48653,
-habiwan,
+habiwan,United States
 habuild,
 hafstaf,
 hank-droid,
@@ -1634,6 +1641,7 @@ kayserlein,Germany
 kcbergmo,
 kcm117,United States
 keefey,Australia
+keikoro,
 keithcroshaw,
 kelvinng1,
 kenaner,
@@ -1641,6 +1649,7 @@ kenguest,Ireland
 kennelbound,
 kfrncs85,United States
 khaled-nabil,Germany
+kherlen,
 kid941005,
 kikuman,
 kilian112233,
@@ -2344,6 +2353,7 @@ tbrasser,Netherlands
 tdn131,
 tdubu,
 tech2mar,Germany
+technerd9000,United Kingdom
 techniker,Germany
 techris45,United States
 tednilsen,Norway

.templates/00-banner.sh

@@ -26,14 +26,14 @@ if ! bashio::supervisor.ping 2>/dev/null; then
     done
 else
     bashio::log.blue '-----------------------------------------------------------'
-    bashio::log.blue " Add-on: $(bashio::addon.name)"
-    bashio::log.blue " $(bashio::addon.description)"
+    bashio::log.blue " Add-on: $(bashio::app.name)"
+    bashio::log.blue " $(bashio::app.description)"
     bashio::log.blue '-----------------------------------------------------------'
 
-    bashio::log.blue " Add-on version: $(bashio::addon.version)"
-    if bashio::var.true "$(bashio::addon.update_available)"; then
+    bashio::log.blue " Add-on version: $(bashio::app.version)"
+    if bashio::var.true "$(bashio::app.update_available)"; then
         bashio::log.magenta " There is an update available!"
-        bashio::log.magenta " Latest version: $(bashio::addon.version_latest)"
+        bashio::log.magenta " Latest version: $(bashio::app.version_latest)"
     else
         bashio::log.green " You are running the latest version."
     fi

.templates/00-local_mounts.sh

@@ -105,7 +105,7 @@ if bashio::config.has_value 'localdisks'; then
             || (
                 bashio::log.fatal "Unable to mount local drives! Please check the name."
                 rmdir /mnt/"$disk"
-                bashio::addon.stop
+                bashio::app.stop
             )
     done
 

.templates/00-smb_mounts.sh

@@ -327,7 +327,7 @@ if bashio::config.has_value 'networkdisks'; then
             bashio::log.fatal "...... incorrect Username, Password, or Domain! Script will stop."
             cleanup_cred
             rm -f "$ERRORCODE_FILE" 2>/dev/null || true
-            bashio::addon.stop
+            bashio::app.stop
           elif echo "$OUTPUT" | grep -q "tree connect failed" || echo "$OUTPUT" | grep -q "NT_STATUS_CONNECTION_DISCONNECTED"; then
             echo "... using SMBv1"
             bashio::log.warning "...... share reachable only with legacy SMBv1 (NT1) negotiation. Forcing SMBv1 options."
@@ -467,7 +467,7 @@ if bashio::config.has_value 'networkdisks'; then
       cleanup_cred
       rm -f "$ERRORCODE_FILE" 2>/dev/null || true
 
-      bashio::addon.stop
+      bashio::app.stop
     fi
   done
 fi

.templates/01-config_yaml.sh

@@ -62,7 +62,7 @@ if [[ "$CONFIGLOCATION" == "/config" ]]; then
     fi
     # Migrate option
     if [[ "$(bashio::config "CONFIG_LOCATION")" == "/config/addons_config"* ]] && [ -f /config/config.yaml ]; then
-        bashio::addon.option "CONFIG_LOCATION" "/config/config.yaml"
+        bashio::app.option "CONFIG_LOCATION" "/config/config.yaml"
         CONFIGSOURCE="/config/config.yaml"
     fi
 fi

.templates/01-custom_script.sh

@@ -50,7 +50,7 @@ SHEBANG_ERRORS=()
 probe_script_content='
 set -e
 
-if ! command -v bashio::addon.version >/dev/null 2>&1; then
+if ! command -v bashio::app.version >/dev/null 2>&1; then
   for f in \
     /usr/lib/bashio/bashio.sh \
     /usr/lib/bashio/lib.sh \
@@ -66,7 +66,7 @@ if ! command -v bashio::addon.version >/dev/null 2>&1; then
 fi
 
 set +e
-_bv="$(bashio::addon.version 2>/dev/null)"
+_bv="$(bashio::app.version 2>/dev/null)"
 _rc=$?
 set -e
 
@@ -75,7 +75,7 @@ if [ "$_rc" -ne 0 ] || [ -z "$_bv" ] || [ "$_bv" = "null" ]; then
     if [ -f "$_sf" ]; then
       # shellcheck disable=SC1090
       . "$_sf"
-      _bv="$(bashio::addon.version 2>/dev/null || true)"
+      _bv="$(bashio::app.version 2>/dev/null || true)"
       break
     fi
   done
@@ -147,7 +147,7 @@ if [ -z "$shebang" ]; then
   exit 1
 fi
 
-if ! command -v bashio::addon.version >/dev/null 2>&1; then
+if ! command -v bashio::app.version >/dev/null 2>&1; then
   for f in /usr/lib/bashio/bashio.sh /usr/lib/bashio/lib.sh /usr/src/bashio/bashio.sh /usr/local/lib/bashio/bashio.sh /usr/local/lib/bashio-standalone.sh; do
     if [ -f "$f" ]; then
       # shellcheck disable=SC1090

.templates/bashio-standalone.sh

@@ -202,6 +202,13 @@ bashio::addon.port() {
   fi
 }
 
+# addon.ingress_url : HA Supervisor provides this; in standalone mode return empty
+bashio::addon.ingress_url() { printf '%s' "${ADDON_INGRESS_URL:-}"; }
+
+# addon.restart / addon.stop : no-ops in standalone (no Supervisor to call)
+bashio::addon.restart() { bashio::log.warning "bashio::app.restart called in standalone mode – no-op"; }
+bashio::addon.stop()    { bashio::log.warning "bashio::app.stop called in standalone mode – no-op"; }
+
 # addon.option : write/delete option in JSON when possible; fallback export env
 bashio::addon.option() {
   local key="${1:-}" value="${2-__BASHIO_UNSET__}" file="${STANDALONE_OPTIONS_JSON:-}"
@@ -432,3 +439,22 @@ bashio::core.check() {
     return 0
   fi
 }
+
+# -----------------------------------------------------------------------------
+# bashio::app.* — forward-compat aliases for the new API (replaces addon.*)
+# Scripts should use bashio::app.* going forward; bashio::addon.* is kept for
+# backward compatibility with older bashio installations.
+# -----------------------------------------------------------------------------
+bashio::app.name()            { bashio::addon.name "$@"; }
+bashio::app.description()     { bashio::addon.description "$@"; }
+bashio::app.version()         { bashio::addon.version "$@"; }
+bashio::app.version_latest()  { bashio::addon.version_latest "$@"; }
+bashio::app.update_available(){ bashio::addon.update_available "$@"; }
+bashio::app.ingress_port()    { bashio::addon.ingress_port "$@"; }
+bashio::app.ingress_entry()   { bashio::addon.ingress_entry "$@"; }
+bashio::app.ingress_url()     { bashio::addon.ingress_url "$@"; }
+bashio::app.ip_address()      { bashio::addon.ip_address "$@"; }
+bashio::app.port()            { bashio::addon.port "$@"; }
+bashio::app.option()          { bashio::addon.option "$@"; }
+bashio::app.restart()         { bashio::addon.restart "$@"; }
+bashio::app.stop()            { bashio::addon.stop "$@"; }

.templates/ha_entrypoint.sh

@@ -68,7 +68,7 @@ SHEBANG_ERRORS=()
 probe_script_content='
 set -e
 
-if ! command -v bashio::addon.version >/dev/null 2>&1; then
+if ! command -v bashio::app.version >/dev/null 2>&1 && ! command -v bashio::addon.version >/dev/null 2>&1; then
   for f in \
     /usr/lib/bashio/bashio.sh \
     /usr/lib/bashio/lib.sh \
@@ -83,9 +83,13 @@ if ! command -v bashio::addon.version >/dev/null 2>&1; then
   done
 fi
 
-# Try regular bashio, fallback to standalone if unavailable or fails
+# Try bashio::app.version (new API), fall back to bashio::addon.version (old API)
 set +e
-_bv="$(bashio::addon.version 2>/dev/null)"
+if command -v bashio::app.version >/dev/null 2>&1; then
+  _bv="$(bashio::app.version 2>/dev/null)"
+else
+  _bv="$(bashio::addon.version 2>/dev/null)"
+fi
 _rc=$?
 set -e
 
@@ -94,7 +98,11 @@ if [ "$_rc" -ne 0 ] || [ -z "$_bv" ] || [ "$_bv" = "null" ]; then
     if [ -f "$_sf" ]; then
       # shellcheck disable=SC1090
       . "$_sf"
-      _bv="$(bashio::addon.version 2>/dev/null || true)"
+      if command -v bashio::app.version >/dev/null 2>&1; then
+        _bv="$(bashio::app.version 2>/dev/null || true)"
+      else
+        _bv="$(bashio::addon.version 2>/dev/null || true)"
+      fi
       break
     fi
   done
@@ -158,7 +166,7 @@ for candidate in "${candidate_shebangs[@]}"; do
 done
 
 if [ -z "$shebang" ]; then
-  echo "ERROR: No valid shebang found (unable to execute bashio::addon.version via candidates)." >&2
+  echo "ERROR: No valid shebang found (unable to execute bashio::app.version / bashio::addon.version via candidates)." >&2
   echo "Tried:" >&2
   printf ' - %s\n' "${candidate_shebangs[@]}" >&2
   if [ "${#SHEBANG_ERRORS[@]}" -gt 0 ]; then
@@ -192,6 +200,15 @@ fi
 # Starting scripts #
 ####################
 
+# Inject a backward-compat shim after the shebang so scripts using bashio::app.*
+# also work on older bashio installations that only provide bashio::addon.*.
+# On new bashio the guard (command -v bashio::app.version) is true and the block is skipped.
+_BASHIO_COMPAT_SHIM='command -v bashio::app.version >/dev/null 2>&1 || { bashio::app.version(){ bashio::addon.version "$@"; }; bashio::app.name(){ bashio::addon.name "$@"; }; bashio::app.description(){ bashio::addon.description "$@"; }; bashio::app.version_latest(){ bashio::addon.version_latest "$@"; }; bashio::app.update_available(){ bashio::addon.update_available "$@"; }; bashio::app.ingress_port(){ bashio::addon.ingress_port "$@"; }; bashio::app.ingress_entry(){ bashio::addon.ingress_entry "$@"; }; bashio::app.ingress_url(){ bashio::addon.ingress_url "$@"; }; bashio::app.ip_address(){ bashio::addon.ip_address "$@"; }; bashio::app.port(){ bashio::addon.port "$@"; }; bashio::app.option(){ bashio::addon.option "$@"; }; bashio::app.restart(){ bashio::addon.restart "$@"; }; bashio::app.stop(){ bashio::addon.stop "$@"; }; }'
+
+_inject_bashio_compat() {
+  sed -i "1a $_BASHIO_COMPAT_SHIM" "$1"
+}
+
 run_one_script() {
   local script="$1"
 
@@ -207,6 +224,7 @@ run_one_script() {
   fi
 
   sed -i "1s|^.*|#!$shebang|" "$script"
+  _inject_bashio_compat "$script"
   chmod +x "$script"
 
   if [ "${ha_entry_source:-null}" = "true" ]; then
@@ -251,6 +269,7 @@ if $PID1; then
     [ -f "$runfile" ] || continue
     echo "Starting: $runfile"
     sed -i "1s|^.*|#!$shebang|" "$runfile"
+    _inject_bashio_compat "$runfile"
     chmod +x "$runfile"
     (
       restart_count=0

README.md

@@ -57,18 +57,18 @@ If you want to do add the repository manually, please follow the procedure highl
 ### Number of addons
 
 - In the repository : 129
-- Installed : 207298
+- Installed : 202857
 
 ### Top 3
 
-1. Filebrowser (22468x)
-2. Flaresolverr (17372x)
-3. Arpspoof (17110x)
+1. Filebrowser (24812x)
+2. Portainer (20162x)
+3. Arpspoof (18566x)
 
 ### Architectures used
 
-- amd64: 72%
-- aarch64: 28%
+- amd64: 70%
+- aarch64: 30%
 
 ### Stars evolution
 
@@ -77,7 +77,7 @@ If you want to do add the repository manually, please follow the procedure highl
 ## Add-ons provided by this repository
 
 %%ADDONS_LIST%%
-✓  [Arpspoof (17110x)](arpspoof/) : block internet connection for local network devices
+✓  [Arpspoof (18566x)](arpspoof/) : block internet connection for local network devices
 
   ![Version](https://img.shields.io/badge/dynamic/yaml?label=Version&query=%24.version&url=https%3A%2F%2Fraw.githubusercontent.com%2Falexbelgium%2Fhassio-addons%2Fmaster%2Farpspoof%2Fconfig.yaml)
 ![Update](https://img.shields.io/badge/dynamic/json?label=Updated&query=%24.last_update&url=https%3A%2F%2Fraw.githubusercontent.com%2Falexbelgium%2Fhassio-addons%2Fmaster%2Farpspoof%2Fupdater.json)
@@ -331,7 +331,7 @@ If you want to do add the repository manually, please follow the procedure highl
 ![smb][smb-badge]
 ![localdisks][localdisks-badge]
 
-✓ ![image](https://api.iconify.design/mdi/file-search.svg) [Filebrowser (22468x)](filebrowser/) : filebrowser provides a file managing interface within a specified directory and it can be used to upload, delete, preview, rename and edit your files
+✓ ![image](https://api.iconify.design/mdi/file-search.svg) [Filebrowser (24812x)](filebrowser/) : filebrowser provides a file managing interface within a specified directory and it can be used to upload, delete, preview, rename and edit your files
 
   ![Version](https://img.shields.io/badge/dynamic/yaml?label=Version&query=%24.version&url=https%3A%2F%2Fraw.githubusercontent.com%2Falexbelgium%2Fhassio-addons%2Fmaster%2Ffilebrowser%2Fconfig.yaml)
 ![Update](https://img.shields.io/badge/dynamic/json?label=Updated&query=%24.last_update&url=https%3A%2F%2Fraw.githubusercontent.com%2Falexbelgium%2Fhassio-addons%2Fmaster%2Ffilebrowser%2Fupdater.json)
@@ -749,7 +749,7 @@ If you want to do add the repository manually, please follow the procedure highl
 ![smb][smb-badge]
 ![localdisks][localdisks-badge]
 
-✓ ![image](https://api.iconify.design/mdi/docker.svg) [Portainer](portainer/) : Manage your Docker environment with ease
+✓ ![image](https://api.iconify.design/mdi/docker.svg) [Portainer (20162x)](portainer/) : Manage your Docker environment with ease
 
   ![Version](https://img.shields.io/badge/dynamic/yaml?label=Version&query=%24.version&url=https%3A%2F%2Fraw.githubusercontent.com%2Falexbelgium%2Fhassio-addons%2Fmaster%2Fportainer%2Fconfig.yaml)
 ![Update](https://img.shields.io/badge/dynamic/json?label=Updated&query=%24.last_update&url=https%3A%2F%2Fraw.githubusercontent.com%2Falexbelgium%2Fhassio-addons%2Fmaster%2Fportainer%2Fupdater.json)
@@ -757,7 +757,7 @@ If you want to do add the repository manually, please follow the procedure highl
 ![amd64][amd64-badge]
 ![ingress][ingress-badge]
 
-✓  [Portainer Agent](portainer_agent/) : An agent used to manage all the resources in a Swarm cluster
+✓  [Portainer (20162x) Agent](portainer_agent/) : An agent used to manage all the resources in a Swarm cluster
 
   ![Version](https://img.shields.io/badge/dynamic/yaml?label=Version&query=%24.version&url=https%3A%2F%2Fraw.githubusercontent.com%2Falexbelgium%2Fhassio-addons%2Fmaster%2Fportainer_agent%2Fconfig.yaml)
 ![Update](https://img.shields.io/badge/dynamic/json?label=Updated&query=%24.last_update&url=https%3A%2F%2Fraw.githubusercontent.com%2Falexbelgium%2Fhassio-addons%2Fmaster%2Fportainer_agent%2Fupdater.json)

addons_updater/CHANGELOG.md

@@ -1,3 +1,5 @@
+## 2026.06 (05-06-2026)
+- Minor bugs fixed
 ## 2026.05 (30-05-2026)
 - Update lastversion to 3.6.12
 

addons_updater/config.yaml

@@ -30,4 +30,4 @@ schema:
 slug: updater
 udev: true
 url: https://github.com/alexbelgium/hassio-addons/tree/master/addons_updater
-version: "2026.05"
+version: "2026.06"

addons_updater/rootfs/etc/cont-init.d/98-fix-changelog-sed.sh

@@ -1,27 +0,0 @@
-#!/usr/bin/with-contenv bashio
-# shellcheck shell=bash
-set -e
-
-UPDATER_SCRIPT="/etc/cont-init.d/99-run.sh"
-
-if [ ! -f "$UPDATER_SCRIPT" ]; then
-    exit 0
-fi
-
-python3 - "$UPDATER_SCRIPT" <<'PY'
-from pathlib import Path
-import sys
-
-path = Path(sys.argv[1])
-text = path.read_text()
-old = '            sed -i "1i " "/data/${BASENAME}/${SLUG}/CHANGELOG.md"'
-new = '''            {
-                tmp_changelog=$(mktemp)
-                printf '\\n' > "$tmp_changelog"
-                cat "/data/${BASENAME}/${SLUG}/CHANGELOG.md" >> "$tmp_changelog"
-                mv "$tmp_changelog" "/data/${BASENAME}/${SLUG}/CHANGELOG.md"
-            }'''
-
-if old in text and new not in text:
-    path.write_text(text.replace(old, new, 1))
-PY

addons_updater/rootfs/etc/cont-init.d/99-run.sh

@@ -356,7 +356,7 @@ for f in */; do
                 sed -i "1i - Update to latest version from $UPSTREAM" "/data/${BASENAME}/${SLUG}/CHANGELOG.md"
             fi
             sed -i "1i ## ${LASTVERSION} (${DATE})" "/data/${BASENAME}/${SLUG}/CHANGELOG.md"
-            sed -i "1i " "/data/${BASENAME}/${SLUG}/CHANGELOG.md"
+            sed -i "1i\ " "/data/${BASENAME}/${SLUG}/CHANGELOG.md"
             LOGINFO="... $SLUG : files updated" && if [ "$VERBOSE" = true ]; then bashio::log.info "$LOGINFO"; fi
 
             #Git commit and push

aurral/build.json

@@ -1,6 +1,6 @@
 {
   "build_from": {
-    "aarch64": "ghcr.io/lklynet/aurral:1.76.40",
-    "amd64": "ghcr.io/lklynet/aurral:1.76.40"
+    "aarch64": "ghcr.io/lklynet/aurral:latest",
+    "amd64": "ghcr.io/lklynet/aurral:latest"
   }
 }

autobrr/rootfs/etc/cont-init.d/32-nginx_ingress.sh

@@ -8,9 +8,9 @@ set -e
 declare ingress_interface
 declare ingress_port
 
-ingress_port=$(bashio::addon.ingress_port)
-ingress_interface=$(bashio::addon.ip_address)
-ingress_entry=$(bashio::addon.ingress_entry)
+ingress_port=$(bashio::app.ingress_port)
+ingress_interface=$(bashio::app.ip_address)
+ingress_entry=$(bashio::app.ingress_entry)
 sed -i "s/%%port%%/${ingress_port}/g" /etc/nginx/servers/ingress.conf
 sed -i "s/%%interface%%/${ingress_interface}/g" /etc/nginx/servers/ingress.conf
 sed -i "s|%%ingress_entry%%|${ingress_entry}|g" /etc/nginx/servers/ingress.conf

bazarr/rootfs/etc/cont-init.d/32-nginx_ingress.sh

@@ -8,9 +8,9 @@ set -e
 declare ingress_interface
 declare ingress_port
 
-ingress_port=$(bashio::addon.ingress_port)
-ingress_interface=$(bashio::addon.ip_address)
-ingress_entry=$(bashio::addon.ingress_entry)
+ingress_port=$(bashio::app.ingress_port)
+ingress_interface=$(bashio::app.ip_address)
+ingress_entry=$(bashio::app.ingress_entry)
 sed -i "s/%%port%%/${ingress_port}/g" /etc/nginx/servers/ingress.conf
 sed -i "s/%%interface%%/${ingress_interface}/g" /etc/nginx/servers/ingress.conf
 sed -i "s|%%ingress_entry%%|${ingress_entry}|g" /etc/nginx/servers/ingress.conf

bazarr/rootfs/etc/services.d/nginx/run

@@ -18,7 +18,7 @@ if [ -f "$CONFIG_LOCATION" ]; then
             if ! grep -q "base_url.*$slug" "$CONFIG_LOCATION"; then
                 bashio::log.warning "BaseUrl not set properly, restarting"
                 sed -i "s/  base_url:.*/  base_url: $slug/" "$CONFIG_LOCATION"
-                bashio::addon.restart
+                bashio::app.restart
             fi
         fi
     fi

binance-trading-bot/rootfs/etc/cont-init.d/32-ingress.sh

@@ -8,9 +8,9 @@ set -e
 declare ingress_interface
 declare ingress_port
 
-ingress_port="$(bashio::addon.ingress_port)"
-ingress_interface="$(bashio::addon.ip_address)"
-ingress_entry=$(bashio::addon.ingress_entry)
+ingress_port="$(bashio::app.ingress_port)"
+ingress_interface="$(bashio::app.ip_address)"
+ingress_entry=$(bashio::app.ingress_entry)
 sed -i "s/%%port%%/${ingress_port}/g" /etc/nginx/servers/ingress.conf
 sed -i "s/%%interface%%/${ingress_interface}/g" /etc/nginx/servers/ingress.conf
 sed -i "s|%%ingress_entry%%|${ingress_entry}|g" /etc/nginx/servers/ingress.conf

birdnet-go/rootfs/etc/cont-init.d/32-nginx_ingress.sh

@@ -10,9 +10,9 @@ declare ingress_interface
 declare ingress_port
 
 echo "Adapting for ingress"
-ingress_port=$(bashio::addon.ingress_port)
-ingress_interface=$(bashio::addon.ip_address)
-ingress_entry=$(bashio::addon.ingress_entry)
+ingress_port=$(bashio::app.ingress_port)
+ingress_interface=$(bashio::app.ip_address)
+ingress_entry=$(bashio::app.ingress_entry)
 sed -i "s/%%port%%/${ingress_port}/g" /etc/nginx/servers/ingress.conf
 sed -i "s/%%interface%%/${ingress_interface}/g" /etc/nginx/servers/ingress.conf
 sed -i "s|%%ingress_entry%%|${ingress_entry}|g" /etc/nginx/servers/ingress.conf

birdnet-pi/rootfs/etc/cont-init.d/31-config_checks.sh

@@ -47,7 +47,7 @@ done
 # CHECK PORT #
 ##############
 
-if [[ "$(bashio::addon.port "80")" == 3000 ]]; then
+if [[ "$(bashio::app.port "80")" == 3000 ]]; then
     bashio::log.fatal "This is crazy but your port is set to 3000 and streamlit doesn't accept this port! You need to change it from the addon options and restart. Thanks"
     sleep infinity
 fi

birdnet-pi/rootfs/etc/cont-init.d/81-modifications.sh

@@ -34,7 +34,7 @@ if bashio::supervisor.ping 2> /dev/null; then
     done
 
     # Check if port 80 is correctly configured
-    if [ -n "$(bashio::addon.port "80")" ] && [ "$(bashio::addon.port "80")" != 80 ]; then
+    if [ -n "$(bashio::app.port "80")" ] && [ "$(bashio::app.port "80")" != 80 ]; then
         bashio::log.fatal "The port 80 is enabled, but should still be 80 if you want automatic SSL certificates generation to work."
     fi
 fi

birdnet-pi/rootfs/etc/cont-init.d/91-nginx_ingress.sh

@@ -18,9 +18,9 @@ fi
 #################
 
 # Variables
-ingress_port=$(bashio::addon.ingress_port)
-ingress_interface=$(bashio::addon.ip_address)
-ingress_entry=$(bashio::addon.ingress_entry)
+ingress_port=$(bashio::app.ingress_port)
+ingress_interface=$(bashio::app.ip_address)
+ingress_entry=$(bashio::app.ingress_entry)
 
 # Quits if ingress is not active
 if [[ "$ingress_entry" != "/api"* ]]; then

birdnet-pipy/rootfs/etc/cont-init.d/32-nginx_ingress.sh

@@ -9,9 +9,9 @@ set -e
 declare ingress_interface
 declare ingress_port
 
-ingress_port="$(bashio::addon.ingress_port)"
-ingress_interface="$(bashio::addon.ip_address)"
-ingress_entry="$(bashio::addon.ingress_entry)"
+ingress_port="$(bashio::app.ingress_port)"
+ingress_interface="$(bashio::app.ip_address)"
+ingress_entry="$(bashio::app.ingress_entry)"
 
 sed -i \
     -e "s|proxy_pass http://api|proxy_pass http://127.0.0.1|g" \

browser_chromium/rootfs/etc/cont-init.d/80-configuration.sh

@@ -42,7 +42,7 @@ if bashio::config.has_value 'PASSWORD'; then
     PASSWORD=$(bashio::config 'PASSWORD')
     passwd -d abc
     echo -e "$PASSWORD\n$PASSWORD" | passwd abc
-elif ! bashio::config.has_value 'PASSWORD' && [[ -n "$(bashio::addon.port "3000")" ]] && [[ -n $(bashio::addon.port "3001") ]]; then
+elif ! bashio::config.has_value 'PASSWORD' && [[ -n "$(bashio::app.port "3000")" ]] && [[ -n $(bashio::app.port "3001") ]]; then
     bashio::log.warning "SEVERE RISK IDENTIFIED"
     bashio::log.warning "You are opening an external port but your password is not defined"
     bashio::log.warning "You risk being hacked ! Please disable the external ports, or use a password"

browser_chromium/rootfs/etc/cont-init.d/90-ingress.sh

@@ -4,7 +4,7 @@ set -e
 
 # nginx Path
 NGINX_CONFIG=/etc/nginx/sites-available/ingress.conf
-SUBFOLDER="$(bashio::addon.ingress_entry)/"
+SUBFOLDER="$(bashio::app.ingress_entry)/"
 
 # Copy template
 cp /defaults/default.conf "${NGINX_CONFIG}"
@@ -15,7 +15,7 @@ mv tmpfile "${NGINX_CONFIG}"
 # Remove ipv6
 sed -i '/listen \[::\]/d' "${NGINX_CONFIG}"
 # Add ingress parameters
-sed -i "s|3000|$(bashio::addon.ingress_port)|g" "${NGINX_CONFIG}"
+sed -i "s|3000|$(bashio::app.ingress_port)|g" "${NGINX_CONFIG}"
 sed -i "s|CWS|8082|g" "${NGINX_CONFIG}"
 sed -i '/proxy_buffering/a proxy_set_header Accept-Encoding "";' "${NGINX_CONFIG}"
 sed -i '/proxy_buffering/a sub_filter_once off;' "${NGINX_CONFIG}"

calibre/rootfs/etc/cont-init.d/90-ingress.sh

@@ -3,7 +3,7 @@
 set -e
 
 NGINX_CONFIG=/etc/nginx/sites-available/ingress.conf
-SUBFOLDER="$(bashio::addon.ingress_entry)"
+SUBFOLDER="$(bashio::app.ingress_entry)"
 
 # Ensure subfolder ends with a trailing slash (except for root)
 if [[ -n "${SUBFOLDER}" && "${SUBFOLDER}" != "/" ]]; then
@@ -22,7 +22,7 @@ mv tmpfile "${NGINX_CONFIG}"
 sed -i '/listen \[::\]/d' "${NGINX_CONFIG}"
 
 # Adapt ports and upstream paths for Home Assistant ingress
-sed -i "s|3000|$(bashio::addon.ingress_port)|g" "${NGINX_CONFIG}"
+sed -i "s|3000|$(bashio::app.ingress_port)|g" "${NGINX_CONFIG}"
 sed -i "s|SUBFOLDER|/|g" "${NGINX_CONFIG}"
 sed -i "s|CWS|8082|g" "${NGINX_CONFIG}"
 sed -i "s|REPLACE_HOME|${HOME:-/root}|g" "${NGINX_CONFIG}"

calibre_web/rootfs/etc/cont-init.d/32-nginx.sh

@@ -12,7 +12,7 @@ declare ingress_interface
 declare ingress_port
 #declare keyfile
 
-#port=$(bashio::addon.port 80)
+#port=$(bashio::app.port 80)
 #if bashio::var.has_value "${port}"; then
 #    bashio::config.require.ssl
 #
@@ -45,12 +45,12 @@ if bashio::config.has_value 'ingress_user'; then
     ingress_user=$(bashio::config 'ingress_user')
 fi
 
-ingress_port=$(bashio::addon.ingress_port)
-ingress_interface=$(bashio::addon.ip_address)
+ingress_port=$(bashio::app.ingress_port)
+ingress_interface=$(bashio::app.ip_address)
 #ha_port=$(bashio::core.port)
 
 sed -i "s/%%ingress_user%%/${ingress_user}/g" /etc/nginx/servers/ingress.conf
 sed -i "s/%%port%%/${ingress_port}/g" /etc/nginx/servers/ingress.conf
 #sed -i "s/%%haport%%/${ha_port}/g" /etc/nginx/servers/ingress.conf
 sed -i "s/%%interface%%/${ingress_interface}/g" /etc/nginx/servers/ingress.conf
-sed -i "s|%%UIPATH%%|$(bashio::addon.ingress_entry)|g" /etc/nginx/servers/ingress.conf
+sed -i "s|%%UIPATH%%|$(bashio::app.ingress_entry)|g" /etc/nginx/servers/ingress.conf

changedetection.io/rootfs/etc/cont-init.d/32-nginx_ingress.sh

@@ -9,9 +9,9 @@ declare ingress_interface
 declare ingress_port
 declare ingress_entry
 
-ingress_port=$(bashio::addon.ingress_port)
-ingress_interface=$(bashio::addon.ip_address)
-ingress_entry=$(bashio::addon.ingress_entry)
+ingress_port=$(bashio::app.ingress_port)
+ingress_interface=$(bashio::app.ip_address)
+ingress_entry=$(bashio::app.ingress_entry)
 
 sed -i "s/%%port%%/${ingress_port}/g" /etc/nginx/servers/ingress.conf
 sed -i "s/%%interface%%/${ingress_interface}/g" /etc/nginx/servers/ingress.conf

cloudcommander/rootfs/etc/cont-init.d/99-run.sh

@@ -51,7 +51,7 @@ declare ingress_interface
 declare ingress_port
 # declare keyfile
 
-CLOUDCMD_PREFIX=$(bashio::addon.ingress_entry)
+CLOUDCMD_PREFIX=$(bashio::app.ingress_entry)
 export CLOUDCMD_PREFIX
 
 declare ADDON_PROTOCOL=http
@@ -60,9 +60,9 @@ if bashio::config.true 'ssl'; then
     bashio::config.require.ssl
 fi
 
-# port=$(bashio::addon.port 80)
-ingress_port=$(bashio::addon.ingress_port)
-ingress_interface=$(bashio::addon.ip_address)
+# port=$(bashio::app.port 80)
+ingress_port=$(bashio::app.ingress_port)
+ingress_interface=$(bashio::app.ip_address)
 sed -i "s|%%protocol%%|${ADDON_PROTOCOL}|g" /etc/nginx/servers/ingress.conf
 sed -i "s|%%port%%|${ingress_port}|g" /etc/nginx/servers/ingress.conf
 sed -i "s|%%interface%%|${ingress_interface}|g" /etc/nginx/servers/ingress.conf

codex/rootfs/etc/cont-init.d/91-csrf.sh

@@ -8,7 +8,7 @@ CSRF=""
 # Get HA Port
 result=$(bashio::api.supervisor GET /core/info true || true)
 port=$(bashio::jq "$result" ".data.port")
-addon_port=$(bashio::addon.port 9810)
+addon_port=$(bashio::app.port 9810)
 
 # Get all possible URLs
 result=$(bashio::api.supervisor GET /core/api/config true || true)
@@ -44,7 +44,7 @@ for url in "${urls[@]}"; do
     if bashio::var.has_value "${url}"; then
         if [[ "${url}" != "null" ]] && [[ "${url}" != "null.local" ]]; then
             CSRF="https://${url}:${port},http://${url}:${port},https://${url},http://${url}",${CSRF}
-            if bashio::var.has_value "$(bashio::addon.port 9810)"; then
+            if bashio::var.has_value "$(bashio::app.port 9810)"; then
                 CSRF="https://${url}:${addon_port},http://${url}:${addon_port}",${CSRF}
             fi
         fi

codex/rootfs/etc/cont-init.d/99-run.sh

@@ -26,7 +26,7 @@ declare ingress_interface
 declare ingress_port
 #declare keyfile
 
-FB_BASEURL="$(bashio::addon.ingress_entry)"
+FB_BASEURL="$(bashio::app.ingress_entry)"
 export FB_BASEURL
 
 declare ADDON_PROTOCOL=http
@@ -35,9 +35,9 @@ if bashio::config.true 'ssl'; then
     ADDON_PROTOCOL=https
 fi
 
-#port=$(bashio::addon.port 80)
-ingress_port=$(bashio::addon.ingress_port)
-ingress_interface=$(bashio::addon.ip_address)
+#port=$(bashio::app.port 80)
+ingress_port=$(bashio::app.ingress_port)
+ingress_interface=$(bashio::app.ip_address)
 sed -i "s|%%protocol%%|${ADDON_PROTOCOL}|g" /etc/nginx/servers/ingress.conf
 sed -i "s|%%port%%|${ingress_port}|g" /etc/nginx/servers/ingress.conf
 sed -i "s|%%interface%%|${ingress_interface}|g" /etc/nginx/servers/ingress.conf

comixed/rootfs/etc/cont-init.d/99-run.sh

@@ -28,7 +28,7 @@ if [[ "$INGRESS" == "true" ]]; then
     declare ingress_port
     #declare keyfile
 
-    FB_BASEURL="$(bashio::addon.ingress_entry)"
+    FB_BASEURL="$(bashio::app.ingress_entry)"
     export FB_BASEURL
 
     declare ADDON_PROTOCOL=http
@@ -37,9 +37,9 @@ if [[ "$INGRESS" == "true" ]]; then
         ADDON_PROTOCOL=https
     fi
 
-    #port=$(bashio::addon.port 80)
-    ingress_port=$(bashio::addon.ingress_port)
-    ingress_interface=$(bashio::addon.ip_address)
+    #port=$(bashio::app.port 80)
+    ingress_port=$(bashio::app.ingress_port)
+    ingress_interface=$(bashio::app.ip_address)
     sed -i "s|%%protocol%%|${ADDON_PROTOCOL}|g" /etc/nginx/servers/ingress.conf
     sed -i "s|%%port%%|${ingress_port}|g" /etc/nginx/servers/ingress.conf
     sed -i "s|%%interface%%|${ingress_interface}|g" /etc/nginx/servers/ingress.conf

emby/rootfs/etc/cont-init.d/32-nginx.sh

@@ -10,8 +10,8 @@ declare ingress_interface
 declare ingress_port
 
 echo "Adapting for ingress"
-ingress_port=$(bashio::addon.ingress_port)
-ingress_interface=$(bashio::addon.ip_address)
+ingress_port=$(bashio::app.ingress_port)
+ingress_interface=$(bashio::app.ip_address)
 sed -i "s/%%port%%/${ingress_port}/g" /etc/nginx/servers/ingress.conf
 sed -i "s/%%interface%%/${ingress_interface}/g" /etc/nginx/servers/ingress.conf
 

emby_beta/rootfs/etc/cont-init.d/32-nginx.sh

@@ -10,8 +10,8 @@ declare ingress_interface
 declare ingress_port
 
 echo "Adapting for ingress"
-ingress_port=$(bashio::addon.ingress_port)
-ingress_interface=$(bashio::addon.ip_address)
+ingress_port=$(bashio::app.ingress_port)
+ingress_interface=$(bashio::app.ip_address)
 sed -i "s/%%port%%/${ingress_port}/g" /etc/nginx/servers/ingress.conf
 sed -i "s/%%interface%%/${ingress_interface}/g" /etc/nginx/servers/ingress.conf
 

enedisgateway2mqtt/rootfs/etc/cont-init.d/32-nginx_ingress.sh

@@ -8,9 +8,9 @@ set -e
 declare ingress_interface
 declare ingress_port
 
-ingress_port=$(bashio::addon.ingress_port)
-ingress_interface=$(bashio::addon.ip_address)
-ingress_entry=$(bashio::addon.ingress_entry)
+ingress_port=$(bashio::app.ingress_port)
+ingress_interface=$(bashio::app.ip_address)
+ingress_entry=$(bashio::app.ingress_entry)
 sed -i "s/%%port%%/${ingress_port}/g" /etc/nginx/servers/ingress.conf
 sed -i "s/%%interface%%/${ingress_interface}/g" /etc/nginx/servers/ingress.conf
 sed -i "s|%%ingress_entry%%|${ingress_entry}|g" /etc/nginx/servers/ingress.conf

enedisgateway2mqtt_dev/rootfs/etc/cont-init.d/32-nginx_ingress.sh

@@ -8,9 +8,9 @@ set -e
 declare ingress_interface
 declare ingress_port
 
-ingress_port=$(bashio::addon.ingress_port)
-ingress_interface=$(bashio::addon.ip_address)
-ingress_entry=$(bashio::addon.ingress_entry)
+ingress_port=$(bashio::app.ingress_port)
+ingress_interface=$(bashio::app.ip_address)
+ingress_entry=$(bashio::app.ingress_entry)
 sed -i "s/%%port%%/${ingress_port}/g" /etc/nginx/servers/ingress.conf
 sed -i "s/%%interface%%/${ingress_interface}/g" /etc/nginx/servers/ingress.conf
 sed -i "s|%%ingress_entry%%|${ingress_entry}|g" /etc/nginx/servers/ingress.conf

filebrowser/rootfs/etc/cont-init.d/99-run.sh

@@ -42,7 +42,7 @@ declare ingress_interface
 declare ingress_port
 #declare keyfile
 
-FB_BASE_URL=$(bashio::addon.ingress_entry)
+FB_BASE_URL=$(bashio::app.ingress_entry)
 export FB_BASE_URL
 
 declare ADDON_PROTOCOL=http
@@ -51,9 +51,9 @@ if bashio::config.true 'ssl'; then
     ADDON_PROTOCOL=https
 fi
 
-#port=$(bashio::addon.port 80)
-ingress_port=$(bashio::addon.ingress_port)
-ingress_interface=$(bashio::addon.ip_address)
+#port=$(bashio::app.port 80)
+ingress_port=$(bashio::app.ingress_port)
+ingress_interface=$(bashio::app.ip_address)
 sed -i "s|%%protocol%%|${ADDON_PROTOCOL}|g" /etc/nginx/servers/ingress.conf
 sed -i "s|%%port%%|${ingress_port}|g" /etc/nginx/servers/ingress.conf
 sed -i "s|%%interface%%|${ingress_interface}|g" /etc/nginx/servers/ingress.conf

filebrowser_quantum/rootfs/etc/cont-init.d/99-run.sh

@@ -43,7 +43,7 @@ declare ingress_interface
 declare ingress_port
 #declare keyfile
 
-FB_BASEURL=$(bashio::addon.ingress_entry)
+FB_BASEURL=$(bashio::app.ingress_entry)
 export FB_BASEURL
 
 declare ADDON_PROTOCOL=http
@@ -52,9 +52,9 @@ if bashio::config.true 'ssl'; then
     ADDON_PROTOCOL=https
 fi
 
-#port=$(bashio::addon.port 80)
-ingress_port=$(bashio::addon.ingress_port)
-ingress_interface=$(bashio::addon.ip_address)
+#port=$(bashio::app.port 80)
+ingress_port=$(bashio::app.ingress_port)
+ingress_interface=$(bashio::app.ip_address)
 sed -i "s|%%protocol%%|${ADDON_PROTOCOL}|g" /etc/nginx/servers/ingress.conf
 sed -i "s|%%port%%|${ingress_port}|g" /etc/nginx/servers/ingress.conf
 sed -i "s|%%interface%%|${ingress_interface}|g" /etc/nginx/servers/ingress.conf

fireflyiii_data_importer/rootfs/etc/cont-init.d/20-migration_config.sh

@@ -6,8 +6,8 @@ slug=fireflyiii_data_importer
 
 if [[ "$(bashio::config "CONFIG_LOCATION")" == *"/addons_config/fireflyiii_data_importer"* ]]; then
     bashio::log.warning "Reset CONFIG_LOCATION to /config"
-    bashio::addon.option "CONFIG_LOCATION" "/config"
-    bashio::addon.restart
+    bashio::app.option "CONFIG_LOCATION" "/config"
+    bashio::app.restart
 fi
 
 CONFIGSOURCE="$(bashio::config "CONFIG_LOCATION")"

flexget/CHANGELOG.md

@@ -1,3 +1,6 @@
+ 
+## 3.19.23 (2026-06-06)
+- Update to latest version from wiserain/flexget
 
 ## 3.19.22 (2026-05-30)
 - Update to latest version from wiserain/flexget

flexget/config.yaml

@@ -95,5 +95,5 @@ schema:
 slug: flexget
 udev: true
 url: https://github.com/alexbelgium/hassio-addons
-version: "3.19.22"
+version: "3.19.23"
 webui: "[PROTO:ssl]://[HOST]:[PORT:5050]"

flexget/updater.json

@@ -1,9 +1,9 @@
 {
   "dockerhub_list_size": "10",
-  "last_update": "2026-05-30",
+  "last_update": "2026-06-06",
   "repository": "alexbelgium/hassio-addons",
   "slug": "flexget",
   "source": "dockerhub",
   "upstream_repo": "wiserain/flexget",
-  "upstream_version": "3.19.22"
+  "upstream_version": "3.19.23"
 }

free_games_claimer/rootfs/etc/cont-init.d/99-run.sh

@@ -82,4 +82,4 @@ done
 
 bashio::log.info "All actions concluded. Stopping in 10 seconds."
 sleep 10
-bashio::addon.stop
+bashio::app.stop

gitea/rootfs/etc/cont-init.d/99-run.sh

@@ -38,7 +38,7 @@ for file in /data/gitea/conf/app.ini /etc/templates/app.ini; do
     if bashio::config.has_value 'ROOT_URL'; then
         bashio::log.blue "ROOT_URL set, using value : $(bashio::config 'ROOT_URL')"
     else
-        ROOT_URL="$PROTOCOL://$(bashio::config 'DOMAIN'):$(bashio::addon.port 3000)"
+        ROOT_URL="$PROTOCOL://$(bashio::config 'DOMAIN'):$(bashio::app.port 3000)"
         bashio::log.blue "ROOT_URL not set, using extrapolated value : $ROOT_URL"
         sed -i "/server/a ROOT_URL=$ROOT_URL" "$file"
     fi

grampsweb/rootfs/etc/cont-init.d/32-nginx_ssl.sh

@@ -12,7 +12,7 @@ declare keyfile
 # General values
 port=5001
 sed -i "s|%%port%%|$port|g" /etc/nginx/servers/ssl.conf
-sed -i "s|%%interface%%|$(bashio::addon.ip_address)|g" /etc/nginx/servers/ssl.conf
+sed -i "s|%%interface%%|$(bashio::app.ip_address)|g" /etc/nginx/servers/ssl.conf
 
 # Ssl values
 if bashio::config.true 'ssl'; then
@@ -29,5 +29,5 @@ if bashio::config.true 'ssl'; then
     sed -i "s|default_server|ssl|g" /etc/nginx/servers/ssl.conf
     sed -i "/proxy_params.conf/a ssl_certificate /ssl/$certfile;" /etc/nginx/servers/ssl.conf
     sed -i "/proxy_params.conf/a ssl_certificate_key /ssl/$keyfile;" /etc/nginx/servers/ssl.conf
-    bashio::log.info "Ssl enabled, please use https for connection. UI is at https://YOURIP:$(bashio::addon.port "$port")"
+    bashio::log.info "Ssl enabled, please use https for connection. UI is at https://YOURIP:$(bashio::app.port "$port")"
 fi

grampsweb/rootfs/etc/cont-init.d/99-run.sh

@@ -44,7 +44,7 @@ else
     bashio::log.warning "Secret key saved to addon options."
     GRAMPSWEB_SECRET_KEY="$(cat /config/secret/secret)"
     export GRAMPSWEB_SECRET_KEY
-    bashio::addon.option "GRAMPSWEB_SECRET_KEY" "$GRAMPSWEB_SECRET_KEY"
+    bashio::app.option "GRAMPSWEB_SECRET_KEY" "$GRAMPSWEB_SECRET_KEY"
 fi
 
 ##################

guacamole/rootfs/etc/cont-init.d/90-ingress.sh

@@ -11,7 +11,7 @@ declare ingress_interface
 declare ingress_port
 declare keyfile
 
-port=$(bashio::addon.port 80)
+port=$(bashio::app.port 80)
 if bashio::var.has_value "${port}"; then
     bashio::config.require.ssl
 
@@ -28,12 +28,12 @@ if bashio::var.has_value "${port}"; then
     fi
 fi
 
-ingress_port=$(bashio::addon.ingress_port)
-ingress_interface=$(bashio::addon.ip_address)
+ingress_port=$(bashio::app.ingress_port)
+ingress_interface=$(bashio::app.ip_address)
 sed -i "s/%%port%%/${ingress_port}/g" /etc/nginx/servers/ingress.conf
 sed -i "s/%%interface%%/${ingress_interface}/g" /etc/nginx/servers/ingress.conf
 
 # Implement SUBFOLDER value
-if [ -f /etc/s6-overlay/s6-rc.d/svc-autostart/run ]; then sed -i "1a SUBFOLDER=$(bashio::addon.ingress_url)" /etc/s6-overlay/s6-rc.d/svc-autostart/run; fi
-if [ -f /etc/services.d/guacamole/run ]; then sed -i "2a SUBFOLDER=$(bashio::addon.ingress_url)" /etc/services.d/guacamole/run; fi
-if [ -f /etc/services.d/guacd/run ]; then sed -i "2a SUBFOLDER=$(bashio::addon.ingress_url)" /etc/services.d/guacd/run; fi
+if [ -f /etc/s6-overlay/s6-rc.d/svc-autostart/run ]; then sed -i "1a SUBFOLDER=$(bashio::app.ingress_url)" /etc/s6-overlay/s6-rc.d/svc-autostart/run; fi
+if [ -f /etc/services.d/guacamole/run ]; then sed -i "2a SUBFOLDER=$(bashio::app.ingress_url)" /etc/services.d/guacamole/run; fi
+if [ -f /etc/services.d/guacd/run ]; then sed -i "2a SUBFOLDER=$(bashio::app.ingress_url)" /etc/services.d/guacd/run; fi

immich/rootfs/etc/cont-init.d/99-run.sh

@@ -39,7 +39,7 @@ check_db_hostname() {
         bashio::log.warning "The addon will stop until this is fixed."
         bashio::log.warning "------------------------------------"
         sleep 30
-        bashio::addon.stop
+        bashio::app.stop
     else
         echo "$DB_HOSTNAME is reachable."
     fi
@@ -89,7 +89,7 @@ setup_root_user() {
     else
         bashio::log.warning "DB_ROOT_PASSWORD not set. Generating a random 12-character alphanumeric password and storing it in the addon options."
         export DB_ROOT_PASSWORD="$(tr -dc 'A-Za-z0-9' < /dev/urandom | head -c12)"
-        bashio::addon.option "DB_ROOT_PASSWORD" "${DB_ROOT_PASSWORD}"
+        bashio::app.option "DB_ROOT_PASSWORD" "${DB_ROOT_PASSWORD}"
 
         # Store generated password in the s6 environment if available
         if [ -d /var/run/s6/container_environment ]; then