hassio-addons/.claude/skills/hassio-addon-workflow/references/traps.md

Repo-specific traps

Things that look correct and are not. Each cost real time or shipped broken. Read this before implementing; skim the headings, read the ones you're about to touch.

The repo's own CLAUDE.md documents structure, Dockerfile conventions, updater.json, CI workflows and lint rules — that is not repeated here.

Contents

• Environment and workspace
• Measurement
• Passing values into base-image services
• Shell and bashio
• Dockerfile and architecture
• Versioning
• Chromium / Electron under Xvfb
• CI and review bots

---

Environment and workspace

The checkout is probably on the wrong branch. Checkouts under /data/claude are shared and persistent; another session leaves them wherever it finished. A stale branch looks entirely normal. Compare the add-on's config.yaml version against the running $BUILD_VERSION before trusting anything you read. scripts/preflight.sh does this.

Never run git stash under /data/claude. refs/stash is shared across every worktree and concurrent session, so it is not isolated even in your own worktree. A bare stash / stash pop pair in a clean worktree once restored another session's stash, producing conflict markers in six untouched files. To compare a file against another revision use git show <rev>:<path> > /tmp/x. If a pop does go wrong: a conflicted pop keeps the stash entry, so nothing is lost — confirm git rev-parse HEAD matches what you pushed, then git reset --hard HEAD.

Work in a worktree under /data, not /tmp — /tmp is noexec, so scripts there won't run.

git worktree add --detach /data/claude/.work/<task> origin/master

You cannot test the Docker build. dockerd does not start in this environment. CI is the only gate. One observed run took ~3 hours, with 20+ runs queued against 2 executing — that was account runner contention, not the diff. Check gh run list before concluding your PR is stuck. Poll in a background task, and never claim the build is verified when it hasn't run.

Measurement

Summed RSS overstates savings. Shared library pages are counted once per process, so removing a duplicate frees its private memory, not its RSS. Measured example: four MCP shims summed to 882 MB RSS but 643 MB PSS / 564 MB private, and per-process private ranged 54 MB down to 2 MB — which completely changes which duplicate is worth removing. Quote private when arguing "removing this saves N MB".

A large mapping is often not resident. SysV/tmpfs segments are lazily populated. Xvfb's 506 MB framebuffer shows Rss: 0 in /proc/<pid>/smaps. Check before calling anything a leak.

/proc/meminfo and free show host figures — there is no memory cgroup namespace here. Never attribute those totals to the add-on.

rtk filters some command output. For a complete listing, redirect to a file and read that (ps ... > $SP/ps.txt), or use rtk proxy <cmd>.

Passing values into base-image services

The plumbing has four stages. scripts/env_trace.sh <VAR> <process> walks all four and tells you which one drops the value — use it rather than reasoning about this from memory.

1. /data/options.json — the user's saved options.
2. Injected export block — .templates/00-global_var.sh writes a literal export <option>='<value>' block into every service run script, using the option name verbatim. So max_resolution is injected; it just isn't a name any service reads. MAX_RES would be both injected and read.
3. container_environment — s6's envdir, read only by services whose shebang is #!/usr/bin/with-contenv.
4. The running process — the only stage that decides behaviour.

Name the option exactly as the env var the service reads (uppercase), the way DRINODE, KEYBOARD and TZ already do. Verified live: DRINODE appears as export DRINODE=… in all 16 service run scripts including svc-xorg, and Xvfb runs with -vfbdevice /dev/dri/renderD128.

Two consequences that are easy to get wrong:

• 00-global_var.sh is cont-init 00. Any cont-init script numbered higher runs after the injection, so it cannot change what a service will see through stage 2.
• LSIO's svc-xorg starts #!/usr/bin/env bashio, not with-contenv, so it never reads stage 3 at all. Writing container_environment for it is a silent no-op — that shipped: the file was written 6 seconds before Xvfb started, and Xvfb still came up at the base-image default.

Renaming an option to match a base-image env var moves validation out of your script and into the schema. 00-global_var.sh exports empty strings (only objects/arrays/nulls are dropped), and base-image scripts typically test ${VAR+x} — set-ness, not emptiness. So an empty MAX_RES becomes Xvfb -screen 0 "x24" and the X server does not start. If you make this move, constrain the value in config.yaml (match(^[0-9]{1,5}x[0-9]{1,5}$)?) in the same commit, or keep a guard script.

Open question, unresolved: what Supervisor does with a stored options.json key that no longer exists in the new schema — error, warn, or silently drop. This decides whether renaming an option is safe on upgrade. The monica add-on shipped exactly such a rename (MEILISEARCH_KEY → meilisearch_key) with no migration, which is weak evidence it is tolerated. The base image has an init-migrations oneshot reading /migrations if a migration is needed. Confirm before renaming a shipped option.

Whichever mechanism you use, verify the service actually received it:

tr '\0' '\n' < /proc/<pid>/environ | grep <VAR>

cont-init.d runs as root before s6 services start — that part is true and is the right place for filesystem and permission setup.

Anything needing an X display must not run in cont-init.d — Xvfb isn't up yet. Put it in the openbox autostart. (ANGLE's OpenGL backend, for instance, fails with "Could not open the default X display".)

Shell and bashio

bashio::config for lists: while read ... < <(bashio::config ...) silently yields an empty list under errexit — bashio's internals return non-zero and process substitution inherits the failure. Capture with $(...) first, then feed a here-string.

Scripts shared by symlink: 80-configuration.sh and friends are shared with the webtop add-ons. Put add-on-specific logic in a new numbered script instead of editing them.

grep -E '^…$' anchors per line. A multi-line config value passes validation on its first line and is then used verbatim. Use bash's [[ =~ ]], which anchors the whole string.

Dockerfile and architecture

Prefer BUILD_ARCH over TARGETARCH — the repo's builder passes BUILD_ARCH explicitly, while TARGETARCH is BuildKit-provided and may or may not be populated.

Either way the variable must be declared with ARG <NAME> in the build stage that uses it; without that it expands empty, the guard never matches, and the block silently does nothing — which is the same dead-if failure described just below, and the usual cause of it.

Verify a guarded block actually ran rather than assuming. Check whether its payload exists in the running image (command -v <tool>), and cross-check /var/log/apt/history.log for the matching apt-get install line. An if block whose condition never matched leaves no trace and no error — one such block sat dead for weeks while appearing to guarantee driver verification.

Don't test for distro-specific filenames. A guard on /usr/share/vulkan/icd.d/intel_icd.x86_64.json named a file Debian does not ship (it installs intel_icd.json), so fixing the arch variable alone would have turned dead code into a failing build.

Versioning

X.Y.Z.N, never X.Y.Z-N. A hyphen parses as a semver pre-release, which Supervisor treats as older than X.Y.Z — the update is never offered.

Date-based versions (2026.08.03) are common here. Check whether master has already moved to the version you were about to use.

Chromium / Electron under Xvfb

Xvfb offers only indirect/software GLX, so Chromium probes it, fails, and falls back to CPU rendering — the GPU process runs --use-gl=disabled and the renderer --disable-gpu-compositing.

Passing ANGLE flags is not sufficient. --ozone-platform=x11 --use-gl=angle --use-angle=gl-egl reached Chromium's command line exactly as intended and the GPU process still reported --use-gl=disabled, having overridden the flag after its own init failed.

A standalone ANGLE probe proves less than it appears to. Loading Claude Desktop's bundled libEGL.so, initializing the OpenGL backend and reading back ANGLE (Intel, Mesa Intel(R) Graphics (ADL-N), OpenGL 4.6) proves the driver and device work — not that Chromium's GPU process, sandbox, dmabuf import and X11 presentation path work. Codex flagged this distinction during review and was right.

--use-angle=gles-egl is rejected outright by Mesa ("Intel or NVIDIA OpenGL ES drivers are not supported").

--disable-dev-shm-usage is a workaround for Docker's 64 MB default /dev/shm. Home Assistant ignores the add-on's shm_size, so the real size varies per install — it was 7.7 GB on one host. Detect at runtime rather than assuming either way; keep the flag when the size cannot be determined, because the crash it prevents is worse than its overhead.

CI and review bots

What CI actually gates — checked against the workflows, because assuming costs a cycle:

• CHANGELOG updated — the only hard gate (onpr_check-pr.yaml, its single exit 1).
• Add-on image build — real, and slow; one run took ~3 h.
• Lint — lint.yml runs super-linter with continue-on-error: true at both call sites, so it cannot fail a PR. Fix real findings anyway, but do not treat lint as a blocker.
• Version bump — no workflow checks it. It is repo convention, and required for Supervisor to offer the rebuild, but it will not fail CI.

CI rewrites your shell scripts. lint.yml runs shfmt -w -i 4 -ci -bn -sr over every *.sh and run, plus a chmod +x pass, on schedule. Repo-wide reformatting commits land on master without your involvement — another reason a shared checkout goes stale mid-task.

Reviewers: CodeRabbit (deepest — often runs scripts to prove a claim; reviews ~9 minutes after the PR opens, or on @coderabbitai review), chatgpt-codex-connector, Copilot, Codacy.

Codacy action_required is this repo's normal state. Other open PRs show the same. It exposes no annotations via the API, so its findings are only visible in the maintainer's Codacy account. Note it and move on rather than guessing.

Resolving a review thread requires GraphQL (resolveReviewThread); the REST API cannot do it. scripts/pr_review.sh wraps fetch / reply / resolve.

The repo's .markdownlint.yaml does not disable MD022/MD032, so a CHANGELOG will show dozens of pre-existing heading/list findings. They are noise because lint is continue-on-error, not because the config exempts them — don't cite the config as a reason to ignore a finding.

Separate new lint findings from pre-existing ones by linting the same file at origin/master and diffing the result sets — otherwise you chase warnings that were already there. scripts/validate.sh --vs-master does this.