hassio-addons/birdnet-pi/DOCS.md

I've tested lots of settings by running 2 versions of my HA birdnet-pi addon in parallel using the same rtsp feed, and comparing impact of parameters. My conclusions aren't universal, as it seems to be highly dependent on the region and type of mic used. For example, the old model seems to be better in Australia, while the new one better in Europe.

Microphone considerations

The critical element is the microphone quality : a Boya By-lm 40 or clippy EM272 (with a very good aux-usb converter) is key to improve the quality of detections. Here is some example tests I did (whole threads are really interesting also): https://github.com/mcguirepr89/BirdNET-Pi/discussions/39#discussioncomment-9706951 https://github.com/mcguirepr89/BirdNET-Pi/discussions/1092#discussioncomment-9706191

My recommendation :

• Best entry system (< 50€) : Boya By-lm40 (30€) + deadcat (10 €)
• Best middle end system (< 150 €) : Clippy EM272 (55€) + Rode AI micro trrs to usb (70€) + Rycote deadcat (27€)
• Best high end system (<300 €) : Clippy EM272 XLR (85€) or LOM Ucho Pro (75€) + Focusrite Scarlet 2i2 4th Gen (200€) + Rycote/Bubblebee deadcat

App settings recommendation

• Model
  • Version : 6k_v2,4 (performs better in Europe at least, the 6k performs better in Australia)
  • Species range model : v1 (uncheck v2.4 ; seems more robust in Europe)
  • Species occurence threshold : 0,001 (was 0,00015 using v2.4 ; use the Species List Tester to check the correct value for you)
• Audio settings
  • Default
  • Channel : 1 (doesn't really matter as analysis is made on mono signal ; 1 allows decreased saved audio size but seems to give slightly messed up spectrograms in my experience)
  • Recording Length : 18 (that's because I use an overlap of 0,5 ; so it analysis 0-3s ; 2,5-5,5s ; 5-8s ; 7,5-10,5 ; 10-13 ; 12,5-15,5 ; 15-18)
  • Extraction Length : 9s (could be 6, but I like to hear my birds :-))
  • Audio format : mp3 (why bother with something else)
• Birdnet-lite settings
  • Overlap : 0,5s
  • Minimum confidence : 0,7
  • Sigmoid sensitivity : 1,25 (I've tried 1,00 but it gave much more false positives ; as decreasing this value increases sensitivity)

Set RTSP server (https://github.com/mcguirepr89/BirdNET-Pi/discussions/1006#discussioncomment-6747450)

On your desktop

Download imager Install raspbian lite 64

Modify config.txt

# Enable audio and USB optimizations
dtparam=audio=off          # Disable the default onboard audio to prevent conflicts
dtoverlay=disable-bt        # Disable onboard Bluetooth to reduce USB bandwidth usage
dtoverlay=disable-wifi      # Disable onboard wifi
# Limit Ethernet to 100 Mbps (disable Gigabit Ethernet)
dtparam=eth_max_speed=100
# USB optimizations
dwc_otg.fiq_fix_enable=1    # Enable FIQ (Fast Interrupt) handling for improved USB performance
max_usb_current=1           # Increase the available USB current (required if Scarlett is powered over USB)
# Additional audio settings (for low-latency operation)
avoid_pwm_pll=1             # Use a more stable PLL for the audio clock
# Optional: HDMI and other settings can be turned off if not needed
hdmi_blanking=1             # Disable HDMI (save power and reduce interference)

With ssh

# Update

sudo apt-get update -y
sudo apt-get dist-upgrade -y

# Disable useless services
sudo systemctl disable hciuart
sudo systemctl disable bluetooth
sudo systemctl disable triggerhappy
sudo systemctl disable avahi-daemon
sudo systemctl disable dphys-swapfile

Install RTSP server

sudo apt-get install -y micro ffmpeg lsof
sudo -s cd /root && wget -c https://github.com/bluenviron/mediamtx/releases/download/v1.9.1/mediamtx_v1.9.1_linux_arm64v8.tar.gz -O - | sudo tar -xz

Optional : install Focusrite driver

apt-get install make linux-headers-$(uname -r)`)
curl -LO https://github.com/geoffreybennett/scarlett-gen2/releases/download/v6.9-v1.3/snd-usb-audio-kmod-6.6-v1.3.tar.gz
tar -xzf snd-usb-audio-kmod-6.6-v1.3.tar.gz
cd snd-usb-audio-kmod-6.6-v1.3
KSRCDIR=/lib/modules/$(uname -r)/build
make -j4 -C $KSRCDIR M=$(pwd) clean
make -j4 -C $KSRCDIR M=$(pwd)
sudo make -j4 -C $KSRCDIR M=$(pwd) INSTALL_MOD_DIR=updates/snd-usb-audio modules_install
sudo depmod
sudo reboot
dmesg | grep -A 5 -B 5 -i focusrite

List audio devices

arecord -l

Check audio device parameters. Example :

arecord -D hw:1,0 --dump-hw-params

Add startup script

sudo nano startmic.sh

#!/bin/bash
echo "Starting birdmic"
# Disable gigabit ethernet
sudo ethtool -s eth0 speed 100 duplex full autoneg on
# Start rtsp server
./mediamtx & true
# Create rtsp feed
sleep 5
# Using hw
ffmpeg -nostdin -f alsa -acodec pcm_s16le -ac 2 -ar 48000 -i hw:0,0 -f rtsp -acodec pcm_s16le rtsp://localhost:8554/birdmic -rtsp_transport tcp || true & true
# Using plughw
# ffmpeg -nostdin -f alsa -acodec pcm_s24le -ac 2 -ar 48000 -i plughw:1,0 -f rtsp -acodec pcm_s16le rtsp://localhost:8554/birdmic -rtsp_transport tcp || true & true

# Set microphone volume
sleep 5
amixer -c 1 sset Mic 90%

Startup automatically

Make the file executable chmod +x startmic.sh Execute the crontab command crontab -e and select nano as your editor. Paste in @reboot $HOME/startmic.sh then save and exit nano. Reboot the Pi and test again with VLC to make sure the RTSP stream is live.